コード例 #1
0
ファイル: cmd_fat.c プロジェクト: xwliu/open-ivi.MX53
/* find first device whose first partition is a DOS filesystem */
int find_fat_partition (void)
{
	int i, j;
	block_dev_desc_t *dev_desc;
	unsigned char *part_table;
	unsigned char buffer[ATA_BLOCKSIZE];

	for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) {
		dev_desc = ide_get_dev (i);
		if (!dev_desc) {
			debug ("couldn't get ide device!\n");
			return (-1);
		}
		if (dev_desc->part_type == PART_TYPE_DOS) {
			if (dev_desc->
				block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
				debug ("can't perform block_read!\n");
				return (-1);
			}
			part_table = &buffer[0x1be];	/* start with partition #4 */
			for (j = 0; j < 4; j++) {
				if ((part_table[4] == 1 ||	/* 12-bit FAT */
				     part_table[4] == 4 ||	/* 16-bit FAT */
				     part_table[4] == 6) &&	/* > 32Meg part */
				    part_table[0] == 0x80) {	/* bootable? */
					curr_dev = i;
					part_offset = part_table[11];
					part_offset <<= 8;
					part_offset |= part_table[10];
					part_offset <<= 8;
					part_offset |= part_table[9];
					part_offset <<= 8;
					part_offset |= part_table[8];
					debug ("found partition start at %ld\n", part_offset);
					return (0);
				}
				part_table += 16;
			}
		}
	}

	debug ("no valid devices found!\n");
	return (-1);
}
コード例 #2
0
ファイル: cmd_boota.c プロジェクト: rcplay/snake-os
int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
    unsigned char *load_address = (unsigned char *) CFG_LOAD_ADDR;
    unsigned char *base_address;
    unsigned long offset;

    unsigned long part_number = 0;
    block_dev_desc_t *boot_disk;
    char *s;
    struct bootcode_block *boot_code;

    /* Get parameters */

    switch (argc) {
    case 2:
        load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16);
        part_number = 0;
        break;
    case 3:
        load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16);
        part_number = simple_strtol (argv[2], NULL, 16);
        break;
    }

    base_address = load_address;

    PRINTF ("Loading boot code from disk %d to %p\n", part_number,
            load_address);

    /* Find the appropriate disk device */
    boot_disk = ide_get_dev (part_number);
    if (!boot_disk) {
        PRINTF ("Unknown disk %d\n", part_number);
        return 1;
    }

    /* Find the bootcode block */
    boot_code = get_bootcode (boot_disk);
    if (!boot_code) {
        PRINTF ("Not a bootable disk %d\n", part_number);
        return 1;
    }

    /* Only use the offset from the first block */
    offset = boot_code->load_data[0];
    memcpy (load_address, &boot_code->load_data[1], 122 * 4);
    load_address += 122 * 4;

    /* Setup for the loop */
    bblk.next = boot_code->next;
    boot_code = &bblk;

    /* Scan the chain, and copy the loader succesively into the destination area */
    while (0xffffffff != boot_code->next) {
        PRINTF ("Loading block %d\n", boot_code->next);

        /* Load block */
        if (1 !=
                boot_disk->block_read (boot_disk->dev, boot_code->next, 1,
                                       (ulong *) & bblk)) {
            PRINTF ("Read error\n");
            return 1;
        }

        /* check sum */
        if (sum_block ((struct block_header *) (ulong *) & bblk) != 0) {
            PRINTF ("Checksum error\n");
            return 1;
        }

        /* Ok, concatenate it to the already loaded code */
        memcpy (load_address, boot_code->load_data, 123 * 4);
        load_address += 123 * 4;
    }

    printf ("Bootcode loaded to %p (size %d)\n", base_address,
            load_address - base_address);
    printf ("Entry point at %p\n", base_address + offset);

    flush_cache (base_address, load_address - base_address);


    s = getenv ("autostart");
    if (s && strcmp (s, "yes") == 0) {
        DECLARE_GLOBAL_DATA_PTR;

        void (*boot) (bd_t *, char *, block_dev_desc_t *);
        char *args;

        boot = (void (*)(bd_t *, char *, block_dev_desc_t *)) (base_address + offset);
        boot (gd->bd, getenv ("amiga_bootargs"), boot_disk);
    }


    return 0;
}
コード例 #3
0
int do_bootext2 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{

	int dev,part,active_part= -1 ;
	ulong addr;
	volatile disk_partition_t info[2];
    	volatile char *env,*env2;
	block_dev_desc_t *dev_desc;
	ulong boot_part[MAX_BOOT_PART];
	char *ep;

	if (argc != 5)
	{
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	dev = simple_strtoul(argv[1], &ep, 16);
	if (*ep) {
		if (*ep != ':')
		{
			printf ("Usage:\n%s\n", cmdtp->usage);
			return(1);
		}

		for (part=0 ; part < MAX_BOOT_PART-1 ; part++)
		{
			ep++;
			boot_part[part] = (ulong)simple_strtoul(ep, &ep, 16);
			if (*ep != ',') {
				printf ("Usage:\n%s\n", cmdtp->usage);
				return(1);
			}

		}
		boot_part[part] = (ulong)simple_strtoul(++ep, NULL, 16);

	}
	else
	{
		puts ("\n** Invalid boot device, use `dev:boot_part1,boot_part2' **\n");
		return(1);
	}

	addr = simple_strtoul(argv[2], NULL, 16);

	dev_desc = (dev >= CFG_IDE_MAXDEVICE) ?  NULL : ide_get_dev(dev);

	if (dev_desc == NULL)
	{
		printf("Non valid dev number %x\n",dev);
		return 1;
	}


	/* Initialize IDE */
	sprintf(tmp_string,"ide reset");
	run_command(tmp_string,0);


	/* Search for Active partition in partition #1 and partition #2*/
	for (part = 0; part < MAX_BOOT_PART ;part++ )
	{
		if (get_partition_info (dev_desc, 
								boot_part[part], 
								(disk_partition_t*)&info[part]))
		{
			continue;
		}

		if (info[part].boot_ind ) 
		{
			active_part = part;
			break;
		}
	}

	/* If no active partition then return */
	if (active_part == -1)
	{
		printf("No active partition on %d and %d\n",
				boot_part[0],boot_part[1]);
		return 1;
	}

	/* Load /boot/uImage from active_part to addr */
	sprintf(tmp_string,"ext2load ide %x:%x %x %s", dev, boot_part[active_part], addr,argv[3]);
	printf("%s\n",tmp_string);
	run_command(tmp_string,0);

	sprintf(tmp_string,"root=%s%d ro",argv[4],boot_part[active_part]);
    	setenv("bootargs_root",tmp_string);

	env = getenv("bootargs");
	env2 = getenv("bootargs_root");
	/* Save bootargs for secondary boot option if boot from active partition will fail */
	sprintf(tmp_string1,"%s",env);
	sprintf(tmp_string,"%s %s",env,env2);
    	setenv("bootargs",tmp_string);

	sprintf(tmp_string,"bootm %x", addr);

	printf("%s\n",tmp_string);
	run_command(tmp_string,0);

	/* If we get here then first boot fail */
	active_part = (active_part + 1)%MAX_BOOT_PART;

	sprintf(tmp_string,"ext2load ide %x:%x %x %s", dev, boot_part[active_part], addr,argv[3]);
	printf("%s\n",tmp_string);
	run_command(tmp_string,0);

	sprintf(tmp_string,"root=%s%d ro",argv[4],boot_part[active_part]);
    	setenv("bootargs_root",tmp_string);
	env2 = getenv("bootargs_root");
	sprintf(tmp_string,"%s %s %s",tmp_string1,env2, "boot_failure");
    	setenv("bootargs",tmp_string);

	sprintf(tmp_string,"bootm %x", addr);

	printf("Starting secondary boot...\n");
	printf("%s\n",tmp_string);
	run_command(tmp_string,0);
	printf("Secondary boot fail...\n");
	return 1;
}