/*
* Initialize the tables for a node.
*/
static void
ath_rate_ctl_reset(struct ath_softc *sc, struct ieee80211_node *ni)
{
#define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL)
#define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL)
#define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS)
struct ath_node *an = ATH_NODE(ni);
struct sample_node *sn = ATH_NODE_SAMPLE(an);
const HAL_RATE_TABLE *rt = sc->sc_currates;
int x, y, rix;
KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode));
KASSERT(sc->sc_curmode < IEEE80211_MODE_MAX+2,
("curmode %u", sc->sc_curmode));
sn->sched = mrr_schedules[sc->sc_curmode];
KASSERT(sn->sched != NULL,
("no mrr schedule for mode %u", sc->sc_curmode));
sn->static_rix = -1;
ath_rate_update_static_rix(sc, ni);
/*
* Construct a bitmask of usable rates. This has all
* negotiated rates minus those marked by the hal as
* to be ignored for doing rate control.
*/
sn->ratemask = 0;
/* MCS rates */
if (ni->ni_flags & IEEE80211_NODE_HT) {
for (x = 0; x < ni->ni_htrates.rs_nrates; x++) {
rix = sc->sc_rixmap[MCS(x)];
if (rix == 0xff)
continue;
/* skip rates marked broken by hal */
if (!rt->info[rix].valid)
continue;
KASSERT(rix < SAMPLE_MAXRATES,
("mcs %u has rix %d", MCS(x), rix));
sn->ratemask |= 1<<rix;
}
}
/* Legacy rates */
for (x = 0; x < ni->ni_rates.rs_nrates; x++) {
rix = sc->sc_rixmap[RATE(x)];
if (rix == 0xff)
continue;
/* skip rates marked broken by hal */
if (!rt->info[rix].valid)
continue;
KASSERT(rix < SAMPLE_MAXRATES,
("rate %u has rix %d", RATE(x), rix));
sn->ratemask |= 1<<rix;
}
#ifdef IEEE80211_DEBUG
if (ieee80211_msg(ni->ni_vap, IEEE80211_MSG_RATECTL)) {
uint32_t mask;
ieee80211_note(ni->ni_vap, "[%6D] %s: size 1600 rate/tt",
ni->ni_macaddr, ":", __func__);
for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) {
if ((mask & 1) == 0)
continue;
printf(" %d %s/%d", dot11rate(rt, rix), dot11rate_label(rt, rix),
calc_usecs_unicast_packet(sc, 1600, rix, 0,0,
(ni->ni_chw == 40)));
}
printf("\n");
}
/*
* Initialize the tables for a node.
*/
static void
ath_rate_ctl_reset(struct ath_softc *sc, struct ieee80211_node *ni)
{
#define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL)
#define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL)
struct ath_node *an = ATH_NODE(ni);
const struct ieee80211_txparam *tp = ni->ni_txparms;
struct sample_node *sn = ATH_NODE_SAMPLE(an);
const HAL_RATE_TABLE *rt = sc->sc_currates;
#ifdef IEEE80211_DEBUG
char ethstr[ETHER_ADDRSTRLEN + 1];
#endif
int x, y, srate, rix;
KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode));
KASSERT(sc->sc_curmode < IEEE80211_MODE_MAX+2,
("curmode %u", sc->sc_curmode));
sn->sched = mrr_schedules[sc->sc_curmode];
KASSERT(sn->sched != NULL,
("no mrr schedule for mode %u", sc->sc_curmode));
sn->static_rix = -1;
if (tp != NULL && tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
/*
* A fixed rate is to be used; ucastrate is the IEEE code
* for this rate (sans basic bit). Check this against the
* negotiated rate set for the node. Note the fixed rate
* may not be available for various reasons so we only
* setup the static rate index if the lookup is successful.
* XXX handle MCS
*/
for (srate = ni->ni_rates.rs_nrates - 1; srate >= 0; srate--)
if (RATE(srate) == tp->ucastrate) {
sn->static_rix = sc->sc_rixmap[tp->ucastrate];
break;
}
#ifdef IEEE80211_DEBUG
if (sn->static_rix == -1) {
IEEE80211_NOTE(ni->ni_vap,
IEEE80211_MSG_RATECTL, ni,
"%s: ucastrate %u not found, nrates %u",
__func__, tp->ucastrate,
ni->ni_rates.rs_nrates);
}
#endif
}
/*
* Construct a bitmask of usable rates. This has all
* negotiated rates minus those marked by the hal as
* to be ignored for doing rate control.
*/
sn->ratemask = 0;
for (x = 0; x < ni->ni_rates.rs_nrates; x++) {
rix = sc->sc_rixmap[RATE(x)];
if (rix == 0xff)
continue;
/* skip rates marked broken by hal */
if (!rt->info[rix].valid)
continue;
KASSERT(rix < SAMPLE_MAXRATES,
("rate %u has rix %d", RATE(x), rix));
sn->ratemask |= 1<<rix;
}
#ifdef IEEE80211_DEBUG
if (ieee80211_msg(ni->ni_vap, IEEE80211_MSG_RATECTL)) {
uint32_t mask;
ieee80211_note(ni->ni_vap, "[%s] %s: size 1600 rate/tt",
kether_ntoa(ni->ni_macaddr, ethstr), __func__);
for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) {
if ((mask & 1) == 0)
continue;
kprintf(" %d/%d", DOT11RATE(rix) / 2,
calc_usecs_unicast_packet(sc, 1600, rix, 0,0));
}
kprintf("\n");
}
