コード例 #1
0
ファイル: glops.c プロジェクト: multipath-tcp/mptcp_net-next
static int inode_go_lock(struct gfs2_holder *gh)
{
	struct gfs2_glock *gl = gh->gh_gl;
	struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
	struct gfs2_inode *ip = gl->gl_object;
	int error = 0;

	if (!ip || (gh->gh_flags & GL_SKIP))
		return 0;

	if (test_bit(GIF_INVALID, &ip->i_flags)) {
		error = gfs2_inode_refresh(ip);
		if (error)
			return error;
	}

	if (gh->gh_state != LM_ST_DEFERRED)
		inode_dio_wait(&ip->i_inode);

	if ((ip->i_diskflags & GFS2_DIF_TRUNC_IN_PROG) &&
	    (gl->gl_state == LM_ST_EXCLUSIVE) &&
	    (gh->gh_state == LM_ST_EXCLUSIVE)) {
		spin_lock(&sdp->sd_trunc_lock);
		if (list_empty(&ip->i_trunc_list))
			list_add(&ip->i_trunc_list, &sdp->sd_trunc_list);
		spin_unlock(&sdp->sd_trunc_lock);
		wake_up(&sdp->sd_quota_wait);
		return 1;
	}

	return error;
}
コード例 #2
0
ファイル: vvp_io.c プロジェクト: walgenbach/lustre-release
static int vvp_io_setattr_trunc(const struct lu_env *env,
                                const struct cl_io_slice *ios,
                                struct inode *inode, loff_t size)
{
	inode_dio_wait(inode);
	return 0;
}
コード例 #3
0
int jfs_setattr(struct dentry *dentry, struct iattr *iattr)
{
	struct inode *inode = dentry->d_inode;
	int rc;

	rc = inode_change_ok(inode, iattr);
	if (rc)
		return rc;

	if (is_quota_modification(inode, iattr))
		dquot_initialize(inode);
	if ((iattr->ia_valid & ATTR_UID && iattr->ia_uid != inode->i_uid) ||
	    (iattr->ia_valid & ATTR_GID && iattr->ia_gid != inode->i_gid)) {
		rc = dquot_transfer(inode, iattr);
		if (rc)
			return rc;
	}

	if ((iattr->ia_valid & ATTR_SIZE) &&
	    iattr->ia_size != i_size_read(inode)) {
		inode_dio_wait(inode);

		rc = vmtruncate(inode, iattr->ia_size);
		if (rc)
			return rc;
	}

	setattr_copy(inode, iattr);
	mark_inode_dirty(inode);

	if (iattr->ia_valid & ATTR_MODE)
		rc = jfs_acl_chmod(inode);
	return rc;
}
コード例 #4
0
ファイル: xfs_reflink.c プロジェクト: oscardagrach/linux
/*
 * Pre-COW all shared blocks within a given byte range of a file and turn off
 * the reflink flag if we unshare all of the file's blocks.
 */
int
xfs_reflink_unshare(
	struct xfs_inode	*ip,
	xfs_off_t		offset,
	xfs_off_t		len)
{
	struct xfs_mount	*mp = ip->i_mount;
	xfs_fileoff_t		fbno;
	xfs_filblks_t		end;
	xfs_off_t		isize;
	int			error;

	if (!xfs_is_reflink_inode(ip))
		return 0;

	trace_xfs_reflink_unshare(ip, offset, len);

	inode_dio_wait(VFS_I(ip));

	/* Try to CoW the selected ranges */
	xfs_ilock(ip, XFS_ILOCK_EXCL);
	fbno = XFS_B_TO_FSBT(mp, offset);
	isize = i_size_read(VFS_I(ip));
	end = XFS_B_TO_FSB(mp, offset + len);
	error = xfs_reflink_dirty_extents(ip, fbno, end, isize);
	if (error)
		goto out_unlock;
	xfs_iunlock(ip, XFS_ILOCK_EXCL);

	/* Wait for the IO to finish */
	error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
	if (error)
		goto out;

	/* Turn off the reflink flag if possible. */
	error = xfs_reflink_try_clear_inode_flag(ip);
	if (error)
		goto out;

	return 0;

out_unlock:
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
out:
	trace_xfs_reflink_unshare_error(ip, error, _RET_IP_);
	return error;
}
コード例 #5
0
ファイル: file.c プロジェクト: AshishNamdev/linux
int jfs_setattr(struct dentry *dentry, struct iattr *iattr)
{
	struct inode *inode = d_inode(dentry);
	int rc;

	rc = setattr_prepare(dentry, iattr);
	if (rc)
		return rc;

	if (is_quota_modification(inode, iattr)) {
		rc = dquot_initialize(inode);
		if (rc)
			return rc;
	}
	if ((iattr->ia_valid & ATTR_UID && !uid_eq(iattr->ia_uid, inode->i_uid)) ||
	    (iattr->ia_valid & ATTR_GID && !gid_eq(iattr->ia_gid, inode->i_gid))) {
		rc = dquot_transfer(inode, iattr);
		if (rc)
			return rc;
	}

	if ((iattr->ia_valid & ATTR_SIZE) &&
	    iattr->ia_size != i_size_read(inode)) {
		inode_dio_wait(inode);

		rc = inode_newsize_ok(inode, iattr->ia_size);
		if (rc)
			return rc;

		truncate_setsize(inode, iattr->ia_size);
		jfs_truncate(inode);
	}

	setattr_copy(inode, iattr);
	mark_inode_dirty(inode);

	if (iattr->ia_valid & ATTR_MODE)
		rc = posix_acl_chmod(inode, inode->i_mode);
	return rc;
}
コード例 #6
0
ファイル: inode.c プロジェクト: SiddheshK15/WR2-Kernel
int nilfs_setattr(struct dentry *dentry, struct iattr *iattr)
{
	struct nilfs_transaction_info ti;
	struct inode *inode = dentry->d_inode;
	struct super_block *sb = inode->i_sb;
	int err;

	err = inode_change_ok(inode, iattr);
	if (err)
		return err;

	err = nilfs_transaction_begin(sb, &ti, 0);
	if (unlikely(err))
		return err;

	if ((iattr->ia_valid & ATTR_SIZE) &&
	    iattr->ia_size != i_size_read(inode)) {
		inode_dio_wait(inode);

		err = vmtruncate(inode, iattr->ia_size);
		if (unlikely(err))
			goto out_err;
	}

	setattr_copy(inode, iattr);
	mark_inode_dirty(inode);

	if (iattr->ia_valid & ATTR_MODE) {
		err = nilfs_acl_chmod(inode);
		if (unlikely(err))
			goto out_err;
	}

	return nilfs_transaction_commit(sb);

out_err:
	nilfs_transaction_abort(sb);
	return err;
}
コード例 #7
0
ファイル: glops.c プロジェクト: multipath-tcp/mptcp_net-next
static void inode_go_sync(struct gfs2_glock *gl)
{
	struct gfs2_inode *ip = gfs2_glock2inode(gl);
	int isreg = ip && S_ISREG(ip->i_inode.i_mode);
	struct address_space *metamapping = gfs2_glock2aspace(gl);
	int error;

	if (isreg) {
		if (test_and_clear_bit(GIF_SW_PAGED, &ip->i_flags))
			unmap_shared_mapping_range(ip->i_inode.i_mapping, 0, 0);
		inode_dio_wait(&ip->i_inode);
	}
	if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags))
		goto out;

	GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_EXCLUSIVE);

	gfs2_log_flush(gl->gl_name.ln_sbd, gl, GFS2_LOG_HEAD_FLUSH_NORMAL |
		       GFS2_LFC_INODE_GO_SYNC);
	filemap_fdatawrite(metamapping);
	if (isreg) {
		struct address_space *mapping = ip->i_inode.i_mapping;
		filemap_fdatawrite(mapping);
		error = filemap_fdatawait(mapping);
		mapping_set_error(mapping, error);
	}
	error = filemap_fdatawait(metamapping);
	mapping_set_error(metamapping, error);
	gfs2_ail_empty_gl(gl);
	/*
	 * Writeback of the data mapping may cause the dirty flag to be set
	 * so we have to clear it again here.
	 */
	smp_mb__before_atomic();
	clear_bit(GLF_DIRTY, &gl->gl_flags);

out:
	gfs2_clear_glop_pending(ip);
}
コード例 #8
0
ファイル: glops.c プロジェクト: Seagate/SMR_FS-EXT4
static void inode_go_sync(struct gfs2_glock *gl)
{
	struct gfs2_inode *ip = gl->gl_object;
	struct address_space *metamapping = gfs2_glock2aspace(gl);
	int error;

	if (ip && !S_ISREG(ip->i_inode.i_mode))
		ip = NULL;
	if (ip) {
		if (test_and_clear_bit(GIF_SW_PAGED, &ip->i_flags))
			unmap_shared_mapping_range(ip->i_inode.i_mapping, 0, 0);
		inode_dio_wait(&ip->i_inode);
	}
	if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags))
		return;

	GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_EXCLUSIVE);

	gfs2_log_flush(gl->gl_sbd, gl, NORMAL_FLUSH);
	filemap_fdatawrite(metamapping);
	if (ip) {
		struct address_space *mapping = ip->i_inode.i_mapping;
		filemap_fdatawrite(mapping);
		error = filemap_fdatawait(mapping);
		mapping_set_error(mapping, error);
	}
	error = filemap_fdatawait(metamapping);
	mapping_set_error(metamapping, error);
	gfs2_ail_empty_gl(gl);
	/*
	 * Writeback of the data mapping may cause the dirty flag to be set
	 * so we have to clear it again here.
	 */
	smp_mb__before_atomic();
	clear_bit(GLF_DIRTY, &gl->gl_flags);
}
コード例 #9
0
ファイル: xattr.c プロジェクト: mb3dot/community-b3-kernel
/*
 * inode->i_mutex: down
 */
int
reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th,
			  struct inode *inode, const char *name,
			  const void *buffer, size_t buffer_size, int flags)
{
	int err = 0;
	struct dentry *dentry;
	struct page *page;
	char *data;
	size_t file_pos = 0;
	size_t buffer_pos = 0;
	size_t new_size;
	__u32 xahash = 0;

	if (get_inode_sd_version(inode) == STAT_DATA_V1)
		return -EOPNOTSUPP;

	reiserfs_write_unlock(inode->i_sb);

	if (!buffer) {
		err = lookup_and_delete_xattr(inode, name);
		reiserfs_write_lock(inode->i_sb);
		return err;
	}

	dentry = xattr_lookup(inode, name, flags);
	if (IS_ERR(dentry)) {
		reiserfs_write_lock(inode->i_sb);
		return PTR_ERR(dentry);
	}

	down_write(&REISERFS_I(inode)->i_xattr_sem);

	reiserfs_write_lock(inode->i_sb);

	xahash = xattr_hash(buffer, buffer_size);
	while (buffer_pos < buffer_size || buffer_pos == 0) {
		size_t chunk;
		size_t skip = 0;
		size_t page_offset = (file_pos & (PAGE_CACHE_SIZE - 1));
		if (buffer_size - buffer_pos > PAGE_CACHE_SIZE)
			chunk = PAGE_CACHE_SIZE;
		else
			chunk = buffer_size - buffer_pos;

		page = reiserfs_get_page(dentry->d_inode, file_pos);
		if (IS_ERR(page)) {
			err = PTR_ERR(page);
			goto out_unlock;
		}

		lock_page(page);
		data = page_address(page);

		if (file_pos == 0) {
			struct reiserfs_xattr_header *rxh;
			skip = file_pos = sizeof(struct reiserfs_xattr_header);
			if (chunk + skip > PAGE_CACHE_SIZE)
				chunk = PAGE_CACHE_SIZE - skip;
			rxh = (struct reiserfs_xattr_header *)data;
			rxh->h_magic = cpu_to_le32(REISERFS_XATTR_MAGIC);
			rxh->h_hash = cpu_to_le32(xahash);
		}

		err = __reiserfs_write_begin(page, page_offset, chunk + skip);
		if (!err) {
			if (buffer)
				memcpy(data + skip, buffer + buffer_pos, chunk);
			err = reiserfs_commit_write(NULL, page, page_offset,
						    page_offset + chunk +
						    skip);
		}
		unlock_page(page);
		reiserfs_put_page(page);
		buffer_pos += chunk;
		file_pos += chunk;
		skip = 0;
		if (err || buffer_size == 0 || !buffer)
			break;
	}

	new_size = buffer_size + sizeof(struct reiserfs_xattr_header);
	if (!err && new_size < i_size_read(dentry->d_inode)) {
		struct iattr newattrs = {
			.ia_ctime = current_fs_time(inode->i_sb),
			.ia_size = new_size,
			.ia_valid = ATTR_SIZE | ATTR_CTIME,
		};

		reiserfs_write_unlock(inode->i_sb);
		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_XATTR);
		inode_dio_wait(dentry->d_inode);
		reiserfs_write_lock(inode->i_sb);

		err = reiserfs_setattr(dentry, &newattrs);
		mutex_unlock(&dentry->d_inode->i_mutex);
	} else
		update_ctime(inode);
out_unlock:
	up_write(&REISERFS_I(inode)->i_xattr_sem);
	dput(dentry);
	return err;
}
コード例 #10
0
int notify_change(struct dentry * dentry, struct iattr * attr)
{
	struct inode *inode = dentry->d_inode;
	mode_t mode = inode->i_mode;
	int error;
	struct timespec now;
	unsigned int ia_valid = attr->ia_valid;

	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
			return -EPERM;
	}

	if ((ia_valid & ATTR_MODE)) {
		mode_t amode = attr->ia_mode;
		/* Flag setting protected by i_mutex */
		if (is_sxid(amode))
			inode->i_flags &= ~S_NOSEC;
	}

	now = current_fs_time(inode->i_sb);

	attr->ia_ctime = now;
	if (!(ia_valid & ATTR_ATIME_SET))
		attr->ia_atime = now;
	if (!(ia_valid & ATTR_MTIME_SET))
		attr->ia_mtime = now;
	if (ia_valid & ATTR_KILL_PRIV) {
		attr->ia_valid &= ~ATTR_KILL_PRIV;
		ia_valid &= ~ATTR_KILL_PRIV;
		error = security_inode_need_killpriv(dentry);
		if (error > 0)
			error = security_inode_killpriv(dentry);
		if (error)
			return error;
	}

	/*
	 * We now pass ATTR_KILL_S*ID to the lower level setattr function so
	 * that the function has the ability to reinterpret a mode change
	 * that's due to these bits. This adds an implicit restriction that
	 * no function will ever call notify_change with both ATTR_MODE and
	 * ATTR_KILL_S*ID set.
	 */
	if ((ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) &&
	    (ia_valid & ATTR_MODE))
		BUG();

	if (ia_valid & ATTR_KILL_SUID) {
		if (mode & S_ISUID) {
			ia_valid = attr->ia_valid |= ATTR_MODE;
			attr->ia_mode = (inode->i_mode & ~S_ISUID);
		}
	}
	if (ia_valid & ATTR_KILL_SGID) {
		if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
			if (!(ia_valid & ATTR_MODE)) {
				ia_valid = attr->ia_valid |= ATTR_MODE;
				attr->ia_mode = inode->i_mode;
			}
			attr->ia_mode &= ~S_ISGID;
		}
	}
	if (!(attr->ia_valid & ~(ATTR_KILL_SUID | ATTR_KILL_SGID)))
		return 0;

	error = security_inode_setattr(dentry, attr);
	if (error)
		return error;

	if (ia_valid & ATTR_SIZE)
		inode_dio_wait(inode);

	if (inode->i_op->setattr)
		error = inode->i_op->setattr(dentry, attr);
	else
		error = simple_setattr(dentry, attr);

	if (!error)
		fsnotify_change(dentry, ia_valid);

	return error;
}
コード例 #11
0
ファイル: ioctl.c プロジェクト: Anjali05/linux
/**
 * Swap the information from the given @inode and the inode
 * EXT4_BOOT_LOADER_INO. It will basically swap i_data and all other
 * important fields of the inodes.
 *
 * @sb:         the super block of the filesystem
 * @inode:      the inode to swap with EXT4_BOOT_LOADER_INO
 *
 */
static long swap_inode_boot_loader(struct super_block *sb,
				struct inode *inode)
{
	handle_t *handle;
	int err;
	struct inode *inode_bl;
	struct ext4_inode_info *ei_bl;
	qsize_t size, size_bl, diff;
	blkcnt_t blocks;
	unsigned short bytes;

	inode_bl = ext4_iget(sb, EXT4_BOOT_LOADER_INO, EXT4_IGET_SPECIAL);
	if (IS_ERR(inode_bl))
		return PTR_ERR(inode_bl);
	ei_bl = EXT4_I(inode_bl);

	/* Protect orig inodes against a truncate and make sure,
	 * that only 1 swap_inode_boot_loader is running. */
	lock_two_nondirectories(inode, inode_bl);

	if (inode->i_nlink != 1 || !S_ISREG(inode->i_mode) ||
	    IS_SWAPFILE(inode) || IS_ENCRYPTED(inode) ||
	    (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL) ||
	    ext4_has_inline_data(inode)) {
		err = -EINVAL;
		goto journal_err_out;
	}

	if (IS_RDONLY(inode) || IS_APPEND(inode) || IS_IMMUTABLE(inode) ||
	    !inode_owner_or_capable(inode) || !capable(CAP_SYS_ADMIN)) {
		err = -EPERM;
		goto journal_err_out;
	}

	down_write(&EXT4_I(inode)->i_mmap_sem);
	err = filemap_write_and_wait(inode->i_mapping);
	if (err)
		goto err_out;

	err = filemap_write_and_wait(inode_bl->i_mapping);
	if (err)
		goto err_out;

	/* Wait for all existing dio workers */
	inode_dio_wait(inode);
	inode_dio_wait(inode_bl);

	truncate_inode_pages(&inode->i_data, 0);
	truncate_inode_pages(&inode_bl->i_data, 0);

	handle = ext4_journal_start(inode_bl, EXT4_HT_MOVE_EXTENTS, 2);
	if (IS_ERR(handle)) {
		err = -EINVAL;
		goto err_out;
	}

	/* Protect extent tree against block allocations via delalloc */
	ext4_double_down_write_data_sem(inode, inode_bl);

	if (inode_bl->i_nlink == 0) {
		/* this inode has never been used as a BOOT_LOADER */
		set_nlink(inode_bl, 1);
		i_uid_write(inode_bl, 0);
		i_gid_write(inode_bl, 0);
		inode_bl->i_flags = 0;
		ei_bl->i_flags = 0;
		inode_set_iversion(inode_bl, 1);
		i_size_write(inode_bl, 0);
		inode_bl->i_mode = S_IFREG;
		if (ext4_has_feature_extents(sb)) {
			ext4_set_inode_flag(inode_bl, EXT4_INODE_EXTENTS);
			ext4_ext_tree_init(handle, inode_bl);
		} else
			memset(ei_bl->i_data, 0, sizeof(ei_bl->i_data));
	}

	err = dquot_initialize(inode);
	if (err)
		goto err_out1;

	size = (qsize_t)(inode->i_blocks) * (1 << 9) + inode->i_bytes;
	size_bl = (qsize_t)(inode_bl->i_blocks) * (1 << 9) + inode_bl->i_bytes;
	diff = size - size_bl;
	swap_inode_data(inode, inode_bl);

	inode->i_ctime = inode_bl->i_ctime = current_time(inode);

	inode->i_generation = prandom_u32();
	inode_bl->i_generation = prandom_u32();
	reset_inode_seed(inode);
	reset_inode_seed(inode_bl);

	ext4_discard_preallocations(inode);

	err = ext4_mark_inode_dirty(handle, inode);
	if (err < 0) {
		/* No need to update quota information. */
		ext4_warning(inode->i_sb,
			"couldn't mark inode #%lu dirty (err %d)",
			inode->i_ino, err);
		/* Revert all changes: */
		swap_inode_data(inode, inode_bl);
		ext4_mark_inode_dirty(handle, inode);
		goto err_out1;
	}

	blocks = inode_bl->i_blocks;
	bytes = inode_bl->i_bytes;
	inode_bl->i_blocks = inode->i_blocks;
	inode_bl->i_bytes = inode->i_bytes;
	err = ext4_mark_inode_dirty(handle, inode_bl);
	if (err < 0) {
		/* No need to update quota information. */
		ext4_warning(inode_bl->i_sb,
			"couldn't mark inode #%lu dirty (err %d)",
			inode_bl->i_ino, err);
		goto revert;
	}

	/* Bootloader inode should not be counted into quota information. */
	if (diff > 0)
		dquot_free_space(inode, diff);
	else
		err = dquot_alloc_space(inode, -1 * diff);

	if (err < 0) {
revert:
		/* Revert all changes: */
		inode_bl->i_blocks = blocks;
		inode_bl->i_bytes = bytes;
		swap_inode_data(inode, inode_bl);
		ext4_mark_inode_dirty(handle, inode);
		ext4_mark_inode_dirty(handle, inode_bl);
	}

err_out1:
	ext4_journal_stop(handle);
	ext4_double_up_write_data_sem(inode, inode_bl);

err_out:
	up_write(&EXT4_I(inode)->i_mmap_sem);
journal_err_out:
	unlock_two_nondirectories(inode, inode_bl);
	iput(inode_bl);
	return err;
}
コード例 #12
0
ファイル: xfs_file.c プロジェクト: oscardagrach/linux
/*
 * Common pre-write limit and setup checks.
 *
 * Called with the iolocked held either shared and exclusive according to
 * @iolock, and returns with it held.  Might upgrade the iolock to exclusive
 * if called for a direct write beyond i_size.
 */
STATIC ssize_t
xfs_file_aio_write_checks(
	struct kiocb		*iocb,
	struct iov_iter		*from,
	int			*iolock)
{
	struct file		*file = iocb->ki_filp;
	struct inode		*inode = file->f_mapping->host;
	struct xfs_inode	*ip = XFS_I(inode);
	ssize_t			error = 0;
	size_t			count = iov_iter_count(from);
	bool			drained_dio = false;

restart:
	error = generic_write_checks(iocb, from);
	if (error <= 0)
		return error;

	error = xfs_break_layouts(inode, iolock);
	if (error)
		return error;

	/*
	 * For changing security info in file_remove_privs() we need i_rwsem
	 * exclusively.
	 */
	if (*iolock == XFS_IOLOCK_SHARED && !IS_NOSEC(inode)) {
		xfs_iunlock(ip, *iolock);
		*iolock = XFS_IOLOCK_EXCL;
		xfs_ilock(ip, *iolock);
		goto restart;
	}
	/*
	 * If the offset is beyond the size of the file, we need to zero any
	 * blocks that fall between the existing EOF and the start of this
	 * write.  If zeroing is needed and we are currently holding the
	 * iolock shared, we need to update it to exclusive which implies
	 * having to redo all checks before.
	 *
	 * We need to serialise against EOF updates that occur in IO
	 * completions here. We want to make sure that nobody is changing the
	 * size while we do this check until we have placed an IO barrier (i.e.
	 * hold the XFS_IOLOCK_EXCL) that prevents new IO from being dispatched.
	 * The spinlock effectively forms a memory barrier once we have the
	 * XFS_IOLOCK_EXCL so we are guaranteed to see the latest EOF value
	 * and hence be able to correctly determine if we need to run zeroing.
	 */
	spin_lock(&ip->i_flags_lock);
	if (iocb->ki_pos > i_size_read(inode)) {
		spin_unlock(&ip->i_flags_lock);
		if (!drained_dio) {
			if (*iolock == XFS_IOLOCK_SHARED) {
				xfs_iunlock(ip, *iolock);
				*iolock = XFS_IOLOCK_EXCL;
				xfs_ilock(ip, *iolock);
				iov_iter_reexpand(from, count);
			}
			/*
			 * We now have an IO submission barrier in place, but
			 * AIO can do EOF updates during IO completion and hence
			 * we now need to wait for all of them to drain. Non-AIO
			 * DIO will have drained before we are given the
			 * XFS_IOLOCK_EXCL, and so for most cases this wait is a
			 * no-op.
			 */
			inode_dio_wait(inode);
			drained_dio = true;
			goto restart;
		}
		error = xfs_zero_eof(ip, iocb->ki_pos, i_size_read(inode), NULL);
		if (error)
			return error;
	} else
		spin_unlock(&ip->i_flags_lock);

	/*
	 * Updating the timestamps will grab the ilock again from
	 * xfs_fs_dirty_inode, so we have to call it after dropping the
	 * lock above.  Eventually we should look into a way to avoid
	 * the pointless lock roundtrip.
	 */
	if (likely(!(file->f_mode & FMODE_NOCMTIME))) {
		error = file_update_time(file);
		if (error)
			return error;
	}

	/*
	 * If we're writing the file then make sure to clear the setuid and
	 * setgid bits if the process is not being run by root.  This keeps
	 * people from modifying setuid and setgid binaries.
	 */
	if (!IS_NOSEC(inode))
		return file_remove_privs(file);
	return 0;
}
コード例 #13
0
int
xfs_free_file_space(
	struct xfs_inode	*ip,
	xfs_off_t		offset,
	xfs_off_t		len)
{
	int			committed;
	int			done;
	xfs_fileoff_t		endoffset_fsb;
	int			error;
	xfs_fsblock_t		firstfsb;
	xfs_bmap_free_t		free_list;
	xfs_bmbt_irec_t		imap;
	xfs_off_t		ioffset;
	xfs_extlen_t		mod=0;
	xfs_mount_t		*mp;
	int			nimap;
	uint			resblks;
	xfs_off_t		rounding;
	int			rt;
	xfs_fileoff_t		startoffset_fsb;
	xfs_trans_t		*tp;

	mp = ip->i_mount;

	trace_xfs_free_file_space(ip);

	error = xfs_qm_dqattach(ip, 0);
	if (error)
		return error;

	error = 0;
	if (len <= 0)	/* if nothing being freed */
		return error;
	rt = XFS_IS_REALTIME_INODE(ip);
	startoffset_fsb	= XFS_B_TO_FSB(mp, offset);
	endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);

	/* wait for the completion of any pending DIOs */
	inode_dio_wait(VFS_I(ip));

	rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
	ioffset = offset & ~(rounding - 1);
	error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
					      ioffset, -1);
	if (error)
		goto out;
	truncate_pagecache_range(VFS_I(ip), ioffset, -1);

	/*
	 * Need to zero the stuff we're not freeing, on disk.
	 * If it's a realtime file & can't use unwritten extents then we
	 * actually need to zero the extent edges.  Otherwise xfs_bunmapi
	 * will take care of it for us.
	 */
	if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
		nimap = 1;
		error = xfs_bmapi_read(ip, startoffset_fsb, 1,
					&imap, &nimap, 0);
		if (error)
			goto out;
		ASSERT(nimap == 0 || nimap == 1);
		if (nimap && imap.br_startblock != HOLESTARTBLOCK) {
			xfs_daddr_t	block;

			ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
			block = imap.br_startblock;
			mod = do_div(block, mp->m_sb.sb_rextsize);
			if (mod)
				startoffset_fsb += mp->m_sb.sb_rextsize - mod;
		}
		nimap = 1;
		error = xfs_bmapi_read(ip, endoffset_fsb - 1, 1,
					&imap, &nimap, 0);
		if (error)
			goto out;
		ASSERT(nimap == 0 || nimap == 1);
		if (nimap && imap.br_startblock != HOLESTARTBLOCK) {
			ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
			mod++;
			if (mod && (mod != mp->m_sb.sb_rextsize))
				endoffset_fsb -= mod;
		}
	}
	if ((done = (endoffset_fsb <= startoffset_fsb)))
		/*
		 * One contiguous piece to clear
		 */
		error = xfs_zero_remaining_bytes(ip, offset, offset + len - 1);
	else {
		/*
		 * Some full blocks, possibly two pieces to clear
		 */
		if (offset < XFS_FSB_TO_B(mp, startoffset_fsb))
			error = xfs_zero_remaining_bytes(ip, offset,
				XFS_FSB_TO_B(mp, startoffset_fsb) - 1);
		if (!error &&
		    XFS_FSB_TO_B(mp, endoffset_fsb) < offset + len)
			error = xfs_zero_remaining_bytes(ip,
				XFS_FSB_TO_B(mp, endoffset_fsb),
				offset + len - 1);
	}

	/*
	 * free file space until done or until there is an error
	 */
	resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
	while (!error && !done) {

		/*
		 * allocate and setup the transaction. Allow this
		 * transaction to dip into the reserve blocks to ensure
		 * the freeing of the space succeeds at ENOSPC.
		 */
		tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
		tp->t_flags |= XFS_TRANS_RESERVE;
		error = xfs_trans_reserve(tp, &M_RES(mp)->tr_write, resblks, 0);

		/*
		 * check for running out of space
		 */
		if (error) {
			/*
			 * Free the transaction structure.
			 */
			ASSERT(error == ENOSPC || XFS_FORCED_SHUTDOWN(mp));
			xfs_trans_cancel(tp, 0);
			break;
		}
		xfs_ilock(ip, XFS_ILOCK_EXCL);
		error = xfs_trans_reserve_quota(tp, mp,
				ip->i_udquot, ip->i_gdquot, ip->i_pdquot,
				resblks, 0, XFS_QMOPT_RES_REGBLKS);
		if (error)
			goto error1;

		xfs_trans_ijoin(tp, ip, 0);

		/*
		 * issue the bunmapi() call to free the blocks
		 */
		xfs_bmap_init(&free_list, &firstfsb);
		error = xfs_bunmapi(tp, ip, startoffset_fsb,
				  endoffset_fsb - startoffset_fsb,
				  0, 2, &firstfsb, &free_list, &done);
		if (error) {
			goto error0;
		}

		/*
		 * complete the transaction
		 */
		error = xfs_bmap_finish(&tp, &free_list, &committed);
		if (error) {
			goto error0;
		}

		error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
		xfs_iunlock(ip, XFS_ILOCK_EXCL);
	}

 out:
	return error;

 error0:
	xfs_bmap_cancel(&free_list);
 error1:
	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
	goto out;
}
コード例 #14
0
ファイル: xfs_iops.c プロジェクト: gxt/linux
/*
 * Truncate file.  Must have write permission and not be a directory.
 */
int
xfs_setattr_size(
	struct xfs_inode	*ip,
	struct iattr		*iattr)
{
	struct xfs_mount	*mp = ip->i_mount;
	struct inode		*inode = VFS_I(ip);
	xfs_off_t		oldsize, newsize;
	struct xfs_trans	*tp;
	int			error;
	uint			lock_flags = 0;
	bool			did_zeroing = false;

	trace_xfs_setattr(ip);

	if (mp->m_flags & XFS_MOUNT_RDONLY)
		return -EROFS;

	if (XFS_FORCED_SHUTDOWN(mp))
		return -EIO;

	error = inode_change_ok(inode, iattr);
	if (error)
		return error;

	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
	ASSERT(xfs_isilocked(ip, XFS_MMAPLOCK_EXCL));
	ASSERT(S_ISREG(inode->i_mode));
	ASSERT((iattr->ia_valid & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET|
		ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0);

	oldsize = inode->i_size;
	newsize = iattr->ia_size;

	/*
	 * Short circuit the truncate case for zero length files.
	 */
	if (newsize == 0 && oldsize == 0 && ip->i_d.di_nextents == 0) {
		if (!(iattr->ia_valid & (ATTR_CTIME|ATTR_MTIME)))
			return 0;

		/*
		 * Use the regular setattr path to update the timestamps.
		 */
		iattr->ia_valid &= ~ATTR_SIZE;
		return xfs_setattr_nonsize(ip, iattr, 0);
	}

	/*
	 * Make sure that the dquots are attached to the inode.
	 */
	error = xfs_qm_dqattach(ip, 0);
	if (error)
		return error;

	/*
	 * Wait for all direct I/O to complete.
	 */
	inode_dio_wait(inode);

	/*
	 * File data changes must be complete before we start the transaction to
	 * modify the inode.  This needs to be done before joining the inode to
	 * the transaction because the inode cannot be unlocked once it is a
	 * part of the transaction.
	 *
	 * Start with zeroing any data beyond EOF that we may expose on file
	 * extension, or zeroing out the rest of the block on a downward
	 * truncate.
	 */
	if (newsize > oldsize) {
		error = xfs_zero_eof(ip, newsize, oldsize, &did_zeroing);
	} else {
		error = iomap_truncate_page(inode, newsize, &did_zeroing,
				&xfs_iomap_ops);
	}

	if (error)
		return error;

	/*
	 * We are going to log the inode size change in this transaction so
	 * any previous writes that are beyond the on disk EOF and the new
	 * EOF that have not been written out need to be written here.  If we
	 * do not write the data out, we expose ourselves to the null files
	 * problem. Note that this includes any block zeroing we did above;
	 * otherwise those blocks may not be zeroed after a crash.
	 */
	if (did_zeroing ||
	    (newsize > ip->i_d.di_size && oldsize != ip->i_d.di_size)) {
		error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
						      ip->i_d.di_size, newsize);
		if (error)
			return error;
	}

	/*
	 * We've already locked out new page faults, so now we can safely remove
	 * pages from the page cache knowing they won't get refaulted until we
	 * drop the XFS_MMAP_EXCL lock after the extent manipulations are
	 * complete. The truncate_setsize() call also cleans partial EOF page
	 * PTEs on extending truncates and hence ensures sub-page block size
	 * filesystems are correctly handled, too.
	 *
	 * We have to do all the page cache truncate work outside the
	 * transaction context as the "lock" order is page lock->log space
	 * reservation as defined by extent allocation in the writeback path.
	 * Hence a truncate can fail with ENOMEM from xfs_trans_alloc(), but
	 * having already truncated the in-memory version of the file (i.e. made
	 * user visible changes). There's not much we can do about this, except
	 * to hope that the caller sees ENOMEM and retries the truncate
	 * operation.
	 */
	truncate_setsize(inode, newsize);

	error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp);
	if (error)
		return error;

	lock_flags |= XFS_ILOCK_EXCL;
	xfs_ilock(ip, XFS_ILOCK_EXCL);
	xfs_trans_ijoin(tp, ip, 0);

	/*
	 * Only change the c/mtime if we are changing the size or we are
	 * explicitly asked to change it.  This handles the semantic difference
	 * between truncate() and ftruncate() as implemented in the VFS.
	 *
	 * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a
	 * special case where we need to update the times despite not having
	 * these flags set.  For all other operations the VFS set these flags
	 * explicitly if it wants a timestamp update.
	 */
	if (newsize != oldsize &&
	    !(iattr->ia_valid & (ATTR_CTIME | ATTR_MTIME))) {
		iattr->ia_ctime = iattr->ia_mtime =
			current_fs_time(inode->i_sb);
		iattr->ia_valid |= ATTR_CTIME | ATTR_MTIME;
	}

	/*
	 * The first thing we do is set the size to new_size permanently on
	 * disk.  This way we don't have to worry about anyone ever being able
	 * to look at the data being freed even in the face of a crash.
	 * What we're getting around here is the case where we free a block, it
	 * is allocated to another file, it is written to, and then we crash.
	 * If the new data gets written to the file but the log buffers
	 * containing the free and reallocation don't, then we'd end up with
	 * garbage in the blocks being freed.  As long as we make the new size
	 * permanent before actually freeing any blocks it doesn't matter if
	 * they get written to.
	 */
	ip->i_d.di_size = newsize;
	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	if (newsize <= oldsize) {
		error = xfs_itruncate_extents(&tp, ip, XFS_DATA_FORK, newsize);
		if (error)
			goto out_trans_cancel;

		/*
		 * Truncated "down", so we're removing references to old data
		 * here - if we delay flushing for a long time, we expose
		 * ourselves unduly to the notorious NULL files problem.  So,
		 * we mark this inode and flush it when the file is closed,
		 * and do not wait the usual (long) time for writeout.
		 */
		xfs_iflags_set(ip, XFS_ITRUNCATED);

		/* A truncate down always removes post-EOF blocks. */
		xfs_inode_clear_eofblocks_tag(ip);
	}

	if (iattr->ia_valid & ATTR_MODE)
		xfs_setattr_mode(ip, iattr);
	if (iattr->ia_valid & (ATTR_ATIME|ATTR_CTIME|ATTR_MTIME))
		xfs_setattr_time(ip, iattr);

	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	XFS_STATS_INC(mp, xs_ig_attrchg);

	if (mp->m_flags & XFS_MOUNT_WSYNC)
		xfs_trans_set_sync(tp);

	error = xfs_trans_commit(tp);
out_unlock:
	if (lock_flags)
		xfs_iunlock(ip, lock_flags);
	return error;

out_trans_cancel:
	xfs_trans_cancel(tp);
	goto out_unlock;
}
コード例 #15
0
ファイル: xfs_file.c プロジェクト: AkyZero/wrapfs-latest
/*
 * xfs_file_dio_aio_write - handle direct IO writes
 *
 * Lock the inode appropriately to prepare for and issue a direct IO write.
 * By separating it from the buffered write path we remove all the tricky to
 * follow locking changes and looping.
 *
 * If there are cached pages or we're extending the file, we need IOLOCK_EXCL
 * until we're sure the bytes at the new EOF have been zeroed and/or the cached
 * pages are flushed out.
 *
 * In most cases the direct IO writes will be done holding IOLOCK_SHARED
 * allowing them to be done in parallel with reads and other direct IO writes.
 * However, if the IO is not aligned to filesystem blocks, the direct IO layer
 * needs to do sub-block zeroing and that requires serialisation against other
 * direct IOs to the same block. In this case we need to serialise the
 * submission of the unaligned IOs so that we don't get racing block zeroing in
 * the dio layer.  To avoid the problem with aio, we also need to wait for
 * outstanding IOs to complete so that unwritten extent conversion is completed
 * before we try to map the overlapping block. This is currently implemented by
 * hitting it with a big hammer (i.e. inode_dio_wait()).
 *
 * Returns with locks held indicated by @iolock and errors indicated by
 * negative return values.
 */
STATIC ssize_t
xfs_file_dio_aio_write(
	struct kiocb		*iocb,
	struct iov_iter		*from)
{
	struct file		*file = iocb->ki_filp;
	struct address_space	*mapping = file->f_mapping;
	struct inode		*inode = mapping->host;
	struct xfs_inode	*ip = XFS_I(inode);
	struct xfs_mount	*mp = ip->i_mount;
	ssize_t			ret = 0;
	int			unaligned_io = 0;
	int			iolock;
	size_t			count = iov_iter_count(from);
	loff_t			pos = iocb->ki_pos;
	struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ?
					mp->m_rtdev_targp : mp->m_ddev_targp;

	/* DIO must be aligned to device logical sector size */
	if ((pos | count) & target->bt_logical_sectormask)
		return -EINVAL;

	/* "unaligned" here means not aligned to a filesystem block */
	if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask))
		unaligned_io = 1;

	/*
	 * We don't need to take an exclusive lock unless there page cache needs
	 * to be invalidated or unaligned IO is being executed. We don't need to
	 * consider the EOF extension case here because
	 * xfs_file_aio_write_checks() will relock the inode as necessary for
	 * EOF zeroing cases and fill out the new inode size as appropriate.
	 */
	if (unaligned_io || mapping->nrpages)
		iolock = XFS_IOLOCK_EXCL;
	else
		iolock = XFS_IOLOCK_SHARED;
	xfs_rw_ilock(ip, iolock);

	/*
	 * Recheck if there are cached pages that need invalidate after we got
	 * the iolock to protect against other threads adding new pages while
	 * we were waiting for the iolock.
	 */
	if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) {
		xfs_rw_iunlock(ip, iolock);
		iolock = XFS_IOLOCK_EXCL;
		xfs_rw_ilock(ip, iolock);
	}

	ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock);
	if (ret)
		goto out;
	iov_iter_truncate(from, count);

	if (mapping->nrpages) {
		ret = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
						    pos, -1);
		if (ret)
			goto out;
		truncate_pagecache_range(VFS_I(ip), pos, -1);
	}

	/*
	 * If we are doing unaligned IO, wait for all other IO to drain,
	 * otherwise demote the lock if we had to flush cached pages
	 */
	if (unaligned_io)
		inode_dio_wait(inode);
	else if (iolock == XFS_IOLOCK_EXCL) {
		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
		iolock = XFS_IOLOCK_SHARED;
	}

	trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);
	ret = generic_file_direct_write(iocb, from, pos);

out:
	xfs_rw_iunlock(ip, iolock);

	/* No fallback to buffered IO on errors for XFS. */
	ASSERT(ret < 0 || ret == count);
	return ret;
}
コード例 #16
0
ファイル: xfs_iops.c プロジェクト: Apaisal/linux
/*
 * Truncate file.  Must have write permission and not be a directory.
 */
int
xfs_setattr_size(
	struct xfs_inode	*ip,
	struct iattr		*iattr,
	int			flags)
{
	struct xfs_mount	*mp = ip->i_mount;
	struct inode		*inode = VFS_I(ip);
	int			mask = iattr->ia_valid;
	struct xfs_trans	*tp;
	int			error;
	uint			lock_flags;
	uint			commit_flags = 0;

	trace_xfs_setattr(ip);

	if (mp->m_flags & XFS_MOUNT_RDONLY)
		return XFS_ERROR(EROFS);

	if (XFS_FORCED_SHUTDOWN(mp))
		return XFS_ERROR(EIO);

	error = -inode_change_ok(inode, iattr);
	if (error)
		return XFS_ERROR(error);

	ASSERT(S_ISREG(ip->i_d.di_mode));
	ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET|
			ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID|
			ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0);

	lock_flags = XFS_ILOCK_EXCL;
	if (!(flags & XFS_ATTR_NOLOCK))
		lock_flags |= XFS_IOLOCK_EXCL;
	xfs_ilock(ip, lock_flags);

	/*
	 * Short circuit the truncate case for zero length files.
	 */
	if (iattr->ia_size == 0 &&
	    ip->i_size == 0 && ip->i_d.di_nextents == 0) {
		if (!(mask & (ATTR_CTIME|ATTR_MTIME)))
			goto out_unlock;

		/*
		 * Use the regular setattr path to update the timestamps.
		 */
		xfs_iunlock(ip, lock_flags);
		iattr->ia_valid &= ~ATTR_SIZE;
		return xfs_setattr_nonsize(ip, iattr, 0);
	}

	/*
	 * Make sure that the dquots are attached to the inode.
	 */
	error = xfs_qm_dqattach_locked(ip, 0);
	if (error)
		goto out_unlock;

	/*
	 * Now we can make the changes.  Before we join the inode to the
	 * transaction, take care of the part of the truncation that must be
	 * done without the inode lock.  This needs to be done before joining
	 * the inode to the transaction, because the inode cannot be unlocked
	 * once it is a part of the transaction.
	 */
	if (iattr->ia_size > ip->i_size) {
		/*
		 * Do the first part of growing a file: zero any data in the
		 * last block that is beyond the old EOF.  We need to do this
		 * before the inode is joined to the transaction to modify
		 * i_size.
		 */
		error = xfs_zero_eof(ip, iattr->ia_size, ip->i_size);
		if (error)
			goto out_unlock;
	}
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
	lock_flags &= ~XFS_ILOCK_EXCL;

	/*
	 * We are going to log the inode size change in this transaction so
	 * any previous writes that are beyond the on disk EOF and the new
	 * EOF that have not been written out need to be written here.  If we
	 * do not write the data out, we expose ourselves to the null files
	 * problem.
	 *
	 * Only flush from the on disk size to the smaller of the in memory
	 * file size or the new size as that's the range we really care about
	 * here and prevents waiting for other data not within the range we
	 * care about here.
	 */
	if (ip->i_size != ip->i_d.di_size && iattr->ia_size > ip->i_d.di_size) {
		error = xfs_flush_pages(ip, ip->i_d.di_size, iattr->ia_size, 0,
					FI_NONE);
		if (error)
			goto out_unlock;
	}

	/*
	 * Wait for all direct I/O to complete.
	 */
	inode_dio_wait(inode);

	error = -block_truncate_page(inode->i_mapping, iattr->ia_size,
				     xfs_get_blocks);
	if (error)
		goto out_unlock;

	tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
	error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
				 XFS_TRANS_PERM_LOG_RES,
				 XFS_ITRUNCATE_LOG_COUNT);
	if (error)
		goto out_trans_cancel;

	truncate_setsize(inode, iattr->ia_size);

	commit_flags = XFS_TRANS_RELEASE_LOG_RES;
	lock_flags |= XFS_ILOCK_EXCL;

	xfs_ilock(ip, XFS_ILOCK_EXCL);

	xfs_trans_ijoin(tp, ip, 0);

	/*
	 * Only change the c/mtime if we are changing the size or we are
	 * explicitly asked to change it.  This handles the semantic difference
	 * between truncate() and ftruncate() as implemented in the VFS.
	 *
	 * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a
	 * special case where we need to update the times despite not having
	 * these flags set.  For all other operations the VFS set these flags
	 * explicitly if it wants a timestamp update.
	 */
	if (iattr->ia_size != ip->i_size &&
	    (!(mask & (ATTR_CTIME | ATTR_MTIME)))) {
		iattr->ia_ctime = iattr->ia_mtime =
			current_fs_time(inode->i_sb);
		mask |= ATTR_CTIME | ATTR_MTIME;
	}

	if (iattr->ia_size > ip->i_size) {
		ip->i_d.di_size = iattr->ia_size;
		ip->i_size = iattr->ia_size;
	} else if (iattr->ia_size <= ip->i_size ||
		   (iattr->ia_size == 0 && ip->i_d.di_nextents)) {
		error = xfs_itruncate_data(&tp, ip, iattr->ia_size);
		if (error)
			goto out_trans_abort;

		/*
		 * Truncated "down", so we're removing references to old data
		 * here - if we delay flushing for a long time, we expose
		 * ourselves unduly to the notorious NULL files problem.  So,
		 * we mark this inode and flush it when the file is closed,
		 * and do not wait the usual (long) time for writeout.
		 */
		xfs_iflags_set(ip, XFS_ITRUNCATED);
	}

	if (mask & ATTR_CTIME) {
		inode->i_ctime = iattr->ia_ctime;
		ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
		ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
		ip->i_update_core = 1;
	}
	if (mask & ATTR_MTIME) {
		inode->i_mtime = iattr->ia_mtime;
		ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
		ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
		ip->i_update_core = 1;
	}

	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	XFS_STATS_INC(xs_ig_attrchg);

	if (mp->m_flags & XFS_MOUNT_WSYNC)
		xfs_trans_set_sync(tp);

	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
out_unlock:
	if (lock_flags)
		xfs_iunlock(ip, lock_flags);
	return error;

out_trans_abort:
	commit_flags |= XFS_TRANS_ABORT;
out_trans_cancel:
	xfs_trans_cancel(tp, commit_flags);
	goto out_unlock;
}
コード例 #17
0
/*
 * xfs_file_dio_aio_write - handle direct IO writes
 *
 * Lock the inode appropriately to prepare for and issue a direct IO write.
 * By separating it from the buffered write path we remove all the tricky to
 * follow locking changes and looping.
 *
 * If there are cached pages or we're extending the file, we need IOLOCK_EXCL
 * until we're sure the bytes at the new EOF have been zeroed and/or the cached
 * pages are flushed out.
 *
 * In most cases the direct IO writes will be done holding IOLOCK_SHARED
 * allowing them to be done in parallel with reads and other direct IO writes.
 * However, if the IO is not aligned to filesystem blocks, the direct IO layer
 * needs to do sub-block zeroing and that requires serialisation against other
 * direct IOs to the same block. In this case we need to serialise the
 * submission of the unaligned IOs so that we don't get racing block zeroing in
 * the dio layer.  To avoid the problem with aio, we also need to wait for
 * outstanding IOs to complete so that unwritten extent conversion is completed
 * before we try to map the overlapping block. This is currently implemented by
 * hitting it with a big hammer (i.e. inode_dio_wait()).
 *
 * Returns with locks held indicated by @iolock and errors indicated by
 * negative return values.
 */
STATIC ssize_t
xfs_file_dio_aio_write(
	struct kiocb		*iocb,
	struct iov_iter		*from)
{
	struct file		*file = iocb->ki_filp;
	struct address_space	*mapping = file->f_mapping;
	struct inode		*inode = mapping->host;
	struct xfs_inode	*ip = XFS_I(inode);
	struct xfs_mount	*mp = ip->i_mount;
	ssize_t			ret = 0;
	int			unaligned_io = 0;
	int			iolock;
	size_t			count = iov_iter_count(from);
	loff_t			end;
	struct iov_iter		data;
	struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ?
					mp->m_rtdev_targp : mp->m_ddev_targp;

	/* DIO must be aligned to device logical sector size */
	if (!IS_DAX(inode) &&
	    ((iocb->ki_pos | count) & target->bt_logical_sectormask))
		return -EINVAL;

	/* "unaligned" here means not aligned to a filesystem block */
	if ((iocb->ki_pos & mp->m_blockmask) ||
	    ((iocb->ki_pos + count) & mp->m_blockmask))
		unaligned_io = 1;

	/*
	 * We don't need to take an exclusive lock unless there page cache needs
	 * to be invalidated or unaligned IO is being executed. We don't need to
	 * consider the EOF extension case here because
	 * xfs_file_aio_write_checks() will relock the inode as necessary for
	 * EOF zeroing cases and fill out the new inode size as appropriate.
	 */
	if (unaligned_io || mapping->nrpages)
		iolock = XFS_IOLOCK_EXCL;
	else
		iolock = XFS_IOLOCK_SHARED;
	xfs_rw_ilock(ip, iolock);

	/*
	 * Recheck if there are cached pages that need invalidate after we got
	 * the iolock to protect against other threads adding new pages while
	 * we were waiting for the iolock.
	 */
	if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) {
		xfs_rw_iunlock(ip, iolock);
		iolock = XFS_IOLOCK_EXCL;
		xfs_rw_ilock(ip, iolock);
	}

	ret = xfs_file_aio_write_checks(iocb, from, &iolock);
	if (ret)
		goto out;
	count = iov_iter_count(from);
	end = iocb->ki_pos + count - 1;

	/*
	 * See xfs_file_read_iter() for why we do a full-file flush here.
	 */
	if (mapping->nrpages) {
		ret = filemap_write_and_wait(VFS_I(ip)->i_mapping);
		if (ret)
			goto out;
		/*
		 * Invalidate whole pages. This can return an error if we fail
		 * to invalidate a page, but this should never happen on XFS.
		 * Warn if it does fail.
		 */
		ret = invalidate_inode_pages2(VFS_I(ip)->i_mapping);
		WARN_ON_ONCE(ret);
		ret = 0;
	}

	/*
	 * If we are doing unaligned IO, wait for all other IO to drain,
	 * otherwise demote the lock if we had to flush cached pages
	 */
	if (unaligned_io)
		inode_dio_wait(inode);
	else if (iolock == XFS_IOLOCK_EXCL) {
		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
		iolock = XFS_IOLOCK_SHARED;
	}

	trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);

	data = *from;
	ret = mapping->a_ops->direct_IO(iocb, &data);

	/* see generic_file_direct_write() for why this is necessary */
	if (mapping->nrpages) {
		invalidate_inode_pages2_range(mapping,
					      iocb->ki_pos >> PAGE_SHIFT,
					      end >> PAGE_SHIFT);
	}
コード例 #18
0
/*
 * xfs_file_dio_aio_write - handle direct IO writes
 *
 * Lock the inode appropriately to prepare for and issue a direct IO write.
 * By separating it from the buffered write path we remove all the tricky to
 * follow locking changes and looping.
 *
 * If there are cached pages or we're extending the file, we need IOLOCK_EXCL
 * until we're sure the bytes at the new EOF have been zeroed and/or the cached
 * pages are flushed out.
 *
 * In most cases the direct IO writes will be done holding IOLOCK_SHARED
 * allowing them to be done in parallel with reads and other direct IO writes.
 * However, if the IO is not aligned to filesystem blocks, the direct IO layer
 * needs to do sub-block zeroing and that requires serialisation against other
 * direct IOs to the same block. In this case we need to serialise the
 * submission of the unaligned IOs so that we don't get racing block zeroing in
 * the dio layer.  To avoid the problem with aio, we also need to wait for
 * outstanding IOs to complete so that unwritten extent conversion is completed
 * before we try to map the overlapping block. This is currently implemented by
 * hitting it with a big hammer (i.e. inode_dio_wait()).
 *
 * Returns with locks held indicated by @iolock and errors indicated by
 * negative return values.
 */
STATIC ssize_t
xfs_file_dio_aio_write(
	struct kiocb		*iocb,
	const struct iovec	*iovp,
	unsigned long		nr_segs,
	loff_t			pos,
	size_t			ocount)
{
	struct file		*file = iocb->ki_filp;
	struct address_space	*mapping = file->f_mapping;
	struct inode		*inode = mapping->host;
	struct xfs_inode	*ip = XFS_I(inode);
	struct xfs_mount	*mp = ip->i_mount;
	ssize_t			ret = 0;
	size_t			count = ocount;
	int			unaligned_io = 0;
	int			iolock;
	struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ?
					mp->m_rtdev_targp : mp->m_ddev_targp;

	if ((pos & target->bt_smask) || (count & target->bt_smask))
		return -XFS_ERROR(EINVAL);

	if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask))
		unaligned_io = 1;

	/*
	 * We don't need to take an exclusive lock unless there page cache needs
	 * to be invalidated or unaligned IO is being executed. We don't need to
	 * consider the EOF extension case here because
	 * xfs_file_aio_write_checks() will relock the inode as necessary for
	 * EOF zeroing cases and fill out the new inode size as appropriate.
	 */
	if (unaligned_io || mapping->nrpages)
		iolock = XFS_IOLOCK_EXCL;
	else
		iolock = XFS_IOLOCK_SHARED;
	xfs_rw_ilock(ip, iolock);

	/*
	 * Recheck if there are cached pages that need invalidate after we got
	 * the iolock to protect against other threads adding new pages while
	 * we were waiting for the iolock.
	 */
	if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) {
		xfs_rw_iunlock(ip, iolock);
		iolock = XFS_IOLOCK_EXCL;
		xfs_rw_ilock(ip, iolock);
	}

	ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock);
	if (ret)
		goto out;

	if (mapping->nrpages) {
		ret = -xfs_flushinval_pages(ip, (pos & PAGE_CACHE_MASK), -1,
							FI_REMAPF_LOCKED);
		if (ret)
			goto out;
	}

	/*
	 * If we are doing unaligned IO, wait for all other IO to drain,
	 * otherwise demote the lock if we had to flush cached pages
	 */
	if (unaligned_io)
		inode_dio_wait(inode);
	else if (iolock == XFS_IOLOCK_EXCL) {
		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
		iolock = XFS_IOLOCK_SHARED;
	}

	trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);
	ret = generic_file_direct_write(iocb, iovp,
			&nr_segs, pos, &iocb->ki_pos, count, ocount);

out:
	xfs_rw_iunlock(ip, iolock);

	/* No fallback to buffered IO on errors for XFS. */
	ASSERT(ret < 0 || ret == count);
	return ret;
}
コード例 #19
0
int
xfs_setattr_size(
	struct xfs_inode	*ip,
	struct iattr		*iattr,
	int			flags)
{
	struct xfs_mount	*mp = ip->i_mount;
	struct inode		*inode = VFS_I(ip);
	int			mask = iattr->ia_valid;
	xfs_off_t		oldsize, newsize;
	struct xfs_trans	*tp;
	int			error;
	uint			lock_flags;
	uint			commit_flags = 0;

	trace_xfs_setattr(ip);

	if (mp->m_flags & XFS_MOUNT_RDONLY)
		return XFS_ERROR(EROFS);

	if (XFS_FORCED_SHUTDOWN(mp))
		return XFS_ERROR(EIO);

	error = -inode_change_ok(inode, iattr);
	if (error)
		return XFS_ERROR(error);

	ASSERT(S_ISREG(ip->i_d.di_mode));
	ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET|
			ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID|
			ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0);

	lock_flags = XFS_ILOCK_EXCL;
	if (!(flags & XFS_ATTR_NOLOCK))
		lock_flags |= XFS_IOLOCK_EXCL;
	xfs_ilock(ip, lock_flags);

	oldsize = inode->i_size;
	newsize = iattr->ia_size;

	if (newsize == 0 && oldsize == 0 && ip->i_d.di_nextents == 0) {
		if (!(mask & (ATTR_CTIME|ATTR_MTIME)))
			goto out_unlock;

		xfs_iunlock(ip, lock_flags);
		iattr->ia_valid &= ~ATTR_SIZE;
		return xfs_setattr_nonsize(ip, iattr, 0);
	}

	error = xfs_qm_dqattach_locked(ip, 0);
	if (error)
		goto out_unlock;

	if (newsize > oldsize) {
		error = xfs_zero_eof(ip, newsize, oldsize);
		if (error)
			goto out_unlock;
	}
	xfs_iunlock(ip, XFS_ILOCK_EXCL);
	lock_flags &= ~XFS_ILOCK_EXCL;

	/*
	 * We are going to log the inode size change in this transaction so
	 * any previous writes that are beyond the on disk EOF and the new
	 * EOF that have not been written out need to be written here.  If we
	 * do not write the data out, we expose ourselves to the null files
	 * problem.
	 *
	 * Only flush from the on disk size to the smaller of the in memory
	 * file size or the new size as that's the range we really care about
	 * here and prevents waiting for other data not within the range we
	 * care about here.
	 */
	if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) {
		error = xfs_flush_pages(ip, ip->i_d.di_size, newsize, 0,
					FI_NONE);
		if (error)
			goto out_unlock;
	}

	inode_dio_wait(inode);

	error = -block_truncate_page(inode->i_mapping, newsize, xfs_get_blocks);
	if (error)
		goto out_unlock;

	tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
	error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
				 XFS_TRANS_PERM_LOG_RES,
				 XFS_ITRUNCATE_LOG_COUNT);
	if (error)
		goto out_trans_cancel;

	truncate_setsize(inode, newsize);

	commit_flags = XFS_TRANS_RELEASE_LOG_RES;
	lock_flags |= XFS_ILOCK_EXCL;

	xfs_ilock(ip, XFS_ILOCK_EXCL);

	xfs_trans_ijoin(tp, ip, 0);

	if (newsize != oldsize && (!(mask & (ATTR_CTIME | ATTR_MTIME)))) {
		iattr->ia_ctime = iattr->ia_mtime =
			current_fs_time(inode->i_sb);
		mask |= ATTR_CTIME | ATTR_MTIME;
	}

	/*
	 * The first thing we do is set the size to new_size permanently on
	 * disk.  This way we don't have to worry about anyone ever being able
	 * to look at the data being freed even in the face of a crash.
	 * What we're getting around here is the case where we free a block, it
	 * is allocated to another file, it is written to, and then we crash.
	 * If the new data gets written to the file but the log buffers
	 * containing the free and reallocation don't, then we'd end up with
	 * garbage in the blocks being freed.  As long as we make the new size
	 * permanent before actually freeing any blocks it doesn't matter if
	 * they get written to.
	 */
	ip->i_d.di_size = newsize;
	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	if (newsize <= oldsize) {
		error = xfs_itruncate_extents(&tp, ip, XFS_DATA_FORK, newsize);
		if (error)
			goto out_trans_abort;

		xfs_iflags_set(ip, XFS_ITRUNCATED);
	}

	if (mask & ATTR_CTIME) {
		inode->i_ctime = iattr->ia_ctime;
		ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
		ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
	}
	if (mask & ATTR_MTIME) {
		inode->i_mtime = iattr->ia_mtime;
		ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
		ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
	}

	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	XFS_STATS_INC(xs_ig_attrchg);

	if (mp->m_flags & XFS_MOUNT_WSYNC)
		xfs_trans_set_sync(tp);

	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
out_unlock:
	if (lock_flags)
		xfs_iunlock(ip, lock_flags);
	return error;

out_trans_abort:
	commit_flags |= XFS_TRANS_ABORT;
out_trans_cancel:
	xfs_trans_cancel(tp, commit_flags);
	goto out_unlock;
}
コード例 #20
0
ファイル: xfs_iops.c プロジェクト: luyanseu/linux
/*
 * Truncate file.  Must have write permission and not be a directory.
 */
int
xfs_setattr_size(
	struct xfs_inode	*ip,
	struct iattr		*iattr)
{
	struct xfs_mount	*mp = ip->i_mount;
	struct inode		*inode = VFS_I(ip);
	xfs_off_t		oldsize, newsize;
	struct xfs_trans	*tp;
	int			error;
	uint			lock_flags = 0;
	uint			commit_flags = 0;

	trace_xfs_setattr(ip);

	if (mp->m_flags & XFS_MOUNT_RDONLY)
		return XFS_ERROR(EROFS);

	if (XFS_FORCED_SHUTDOWN(mp))
		return XFS_ERROR(EIO);

	error = -inode_change_ok(inode, iattr);
	if (error)
		return XFS_ERROR(error);

	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
	ASSERT(S_ISREG(ip->i_d.di_mode));
	ASSERT((iattr->ia_valid & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET|
		ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0);

	oldsize = inode->i_size;
	newsize = iattr->ia_size;

	/*
	 * Short circuit the truncate case for zero length files.
	 */
	if (newsize == 0 && oldsize == 0 && ip->i_d.di_nextents == 0) {
		if (!(iattr->ia_valid & (ATTR_CTIME|ATTR_MTIME)))
			return 0;

		/*
		 * Use the regular setattr path to update the timestamps.
		 */
		iattr->ia_valid &= ~ATTR_SIZE;
		return xfs_setattr_nonsize(ip, iattr, 0);
	}

	/*
	 * Make sure that the dquots are attached to the inode.
	 */
	error = xfs_qm_dqattach(ip, 0);
	if (error)
		return error;

	/*
	 * Now we can make the changes.  Before we join the inode to the
	 * transaction, take care of the part of the truncation that must be
	 * done without the inode lock.  This needs to be done before joining
	 * the inode to the transaction, because the inode cannot be unlocked
	 * once it is a part of the transaction.
	 */
	if (newsize > oldsize) {
		/*
		 * Do the first part of growing a file: zero any data in the
		 * last block that is beyond the old EOF.  We need to do this
		 * before the inode is joined to the transaction to modify
		 * i_size.
		 */
		error = xfs_zero_eof(ip, newsize, oldsize);
		if (error)
			return error;
	}

	/*
	 * We are going to log the inode size change in this transaction so
	 * any previous writes that are beyond the on disk EOF and the new
	 * EOF that have not been written out need to be written here.  If we
	 * do not write the data out, we expose ourselves to the null files
	 * problem.
	 *
	 * Only flush from the on disk size to the smaller of the in memory
	 * file size or the new size as that's the range we really care about
	 * here and prevents waiting for other data not within the range we
	 * care about here.
	 */
	if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) {
		error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
						      ip->i_d.di_size, newsize);
		if (error)
			return error;
	}

	/*
	 * Wait for all direct I/O to complete.
	 */
	inode_dio_wait(inode);

	error = -block_truncate_page(inode->i_mapping, newsize, xfs_get_blocks);
	if (error)
		return error;

	tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
	error = xfs_trans_reserve(tp, &M_RES(mp)->tr_itruncate, 0, 0);
	if (error)
		goto out_trans_cancel;

	truncate_setsize(inode, newsize);

	commit_flags = XFS_TRANS_RELEASE_LOG_RES;
	lock_flags |= XFS_ILOCK_EXCL;

	xfs_ilock(ip, XFS_ILOCK_EXCL);

	xfs_trans_ijoin(tp, ip, 0);

	/*
	 * Only change the c/mtime if we are changing the size or we are
	 * explicitly asked to change it.  This handles the semantic difference
	 * between truncate() and ftruncate() as implemented in the VFS.
	 *
	 * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a
	 * special case where we need to update the times despite not having
	 * these flags set.  For all other operations the VFS set these flags
	 * explicitly if it wants a timestamp update.
	 */
	if (newsize != oldsize &&
	    !(iattr->ia_valid & (ATTR_CTIME | ATTR_MTIME))) {
		iattr->ia_ctime = iattr->ia_mtime =
			current_fs_time(inode->i_sb);
		iattr->ia_valid |= ATTR_CTIME | ATTR_MTIME;
	}

	/*
	 * The first thing we do is set the size to new_size permanently on
	 * disk.  This way we don't have to worry about anyone ever being able
	 * to look at the data being freed even in the face of a crash.
	 * What we're getting around here is the case where we free a block, it
	 * is allocated to another file, it is written to, and then we crash.
	 * If the new data gets written to the file but the log buffers
	 * containing the free and reallocation don't, then we'd end up with
	 * garbage in the blocks being freed.  As long as we make the new size
	 * permanent before actually freeing any blocks it doesn't matter if
	 * they get written to.
	 */
	ip->i_d.di_size = newsize;
	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	if (newsize <= oldsize) {
		error = xfs_itruncate_extents(&tp, ip, XFS_DATA_FORK, newsize);
		if (error)
			goto out_trans_abort;

		/*
		 * Truncated "down", so we're removing references to old data
		 * here - if we delay flushing for a long time, we expose
		 * ourselves unduly to the notorious NULL files problem.  So,
		 * we mark this inode and flush it when the file is closed,
		 * and do not wait the usual (long) time for writeout.
		 */
		xfs_iflags_set(ip, XFS_ITRUNCATED);

		/* A truncate down always removes post-EOF blocks. */
		xfs_inode_clear_eofblocks_tag(ip);
	}

	if (iattr->ia_valid & ATTR_MODE)
		xfs_setattr_mode(ip, iattr);
	if (iattr->ia_valid & (ATTR_ATIME|ATTR_CTIME|ATTR_MTIME))
		xfs_setattr_time(ip, iattr);

	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);

	XFS_STATS_INC(xs_ig_attrchg);

	if (mp->m_flags & XFS_MOUNT_WSYNC)
		xfs_trans_set_sync(tp);

	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
out_unlock:
	if (lock_flags)
		xfs_iunlock(ip, lock_flags);
	return error;

out_trans_abort:
	commit_flags |= XFS_TRANS_ABORT;
out_trans_cancel:
	xfs_trans_cancel(tp, commit_flags);
	goto out_unlock;
}
コード例 #21
0
/*
 * xfs_file_dio_aio_write - handle direct IO writes
 *
 * Lock the inode appropriately to prepare for and issue a direct IO write.
 * By separating it from the buffered write path we remove all the tricky to
 * follow locking changes and looping.
 *
 * If there are cached pages or we're extending the file, we need IOLOCK_EXCL
 * until we're sure the bytes at the new EOF have been zeroed and/or the cached
 * pages are flushed out.
 *
 * In most cases the direct IO writes will be done holding IOLOCK_SHARED
 * allowing them to be done in parallel with reads and other direct IO writes.
 * However, if the IO is not aligned to filesystem blocks, the direct IO layer
 * needs to do sub-block zeroing and that requires serialisation against other
 * direct IOs to the same block. In this case we need to serialise the
 * submission of the unaligned IOs so that we don't get racing block zeroing in
 * the dio layer.  To avoid the problem with aio, we also need to wait for
 * outstanding IOs to complete so that unwritten extent conversion is completed
 * before we try to map the overlapping block. This is currently implemented by
 * hitting it with a big hammer (i.e. inode_dio_wait()).
 *
 * Returns with locks held indicated by @iolock and errors indicated by
 * negative return values.
 */
STATIC ssize_t
xfs_file_dio_aio_write(
    struct kiocb		*iocb,
    const struct iovec	*iovp,
    unsigned long		nr_segs,
    loff_t			pos,
    size_t			ocount)
{
    struct file		*file = iocb->ki_filp;
    struct address_space	*mapping = file->f_mapping;
    struct inode		*inode = mapping->host;
    struct xfs_inode	*ip = XFS_I(inode);
    struct xfs_mount	*mp = ip->i_mount;
    ssize_t			ret = 0;
    size_t			count = ocount;
    int			unaligned_io = 0;
    int			iolock;
    struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ?
                                  mp->m_rtdev_targp : mp->m_ddev_targp;

    if ((pos & target->bt_smask) || (count & target->bt_smask))
        return -XFS_ERROR(EINVAL);

    if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask))
        unaligned_io = 1;

    if (unaligned_io || mapping->nrpages)
        iolock = XFS_IOLOCK_EXCL;
    else
        iolock = XFS_IOLOCK_SHARED;
    xfs_rw_ilock(ip, iolock);

    if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) {
        xfs_rw_iunlock(ip, iolock);
        iolock = XFS_IOLOCK_EXCL;
        xfs_rw_ilock(ip, iolock);
    }

    ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock);
    if (ret)
        goto out;

    if (mapping->nrpages) {
        ret = -xfs_flushinval_pages(ip, (pos & PAGE_CACHE_MASK), -1,
                                    FI_REMAPF_LOCKED);
        if (ret)
            goto out;
    }

    if (unaligned_io)
        inode_dio_wait(inode);
    else if (iolock == XFS_IOLOCK_EXCL) {
        xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
        iolock = XFS_IOLOCK_SHARED;
    }

    trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);
    ret = generic_file_direct_write(iocb, iovp,
                                    &nr_segs, pos, &iocb->ki_pos, count, ocount);

out:
    xfs_rw_iunlock(ip, iolock);


    ASSERT(ret < 0 || ret == count);
    return ret;
}
コード例 #22
0
ファイル: xfs_file.c プロジェクト: oscardagrach/linux
/*
 * xfs_file_dio_aio_write - handle direct IO writes
 *
 * Lock the inode appropriately to prepare for and issue a direct IO write.
 * By separating it from the buffered write path we remove all the tricky to
 * follow locking changes and looping.
 *
 * If there are cached pages or we're extending the file, we need IOLOCK_EXCL
 * until we're sure the bytes at the new EOF have been zeroed and/or the cached
 * pages are flushed out.
 *
 * In most cases the direct IO writes will be done holding IOLOCK_SHARED
 * allowing them to be done in parallel with reads and other direct IO writes.
 * However, if the IO is not aligned to filesystem blocks, the direct IO layer
 * needs to do sub-block zeroing and that requires serialisation against other
 * direct IOs to the same block. In this case we need to serialise the
 * submission of the unaligned IOs so that we don't get racing block zeroing in
 * the dio layer.  To avoid the problem with aio, we also need to wait for
 * outstanding IOs to complete so that unwritten extent conversion is completed
 * before we try to map the overlapping block. This is currently implemented by
 * hitting it with a big hammer (i.e. inode_dio_wait()).
 *
 * Returns with locks held indicated by @iolock and errors indicated by
 * negative return values.
 */
STATIC ssize_t
xfs_file_dio_aio_write(
	struct kiocb		*iocb,
	struct iov_iter		*from)
{
	struct file		*file = iocb->ki_filp;
	struct address_space	*mapping = file->f_mapping;
	struct inode		*inode = mapping->host;
	struct xfs_inode	*ip = XFS_I(inode);
	struct xfs_mount	*mp = ip->i_mount;
	ssize_t			ret = 0;
	int			unaligned_io = 0;
	int			iolock;
	size_t			count = iov_iter_count(from);
	struct xfs_buftarg      *target = XFS_IS_REALTIME_INODE(ip) ?
					mp->m_rtdev_targp : mp->m_ddev_targp;

	/* DIO must be aligned to device logical sector size */
	if ((iocb->ki_pos | count) & target->bt_logical_sectormask)
		return -EINVAL;

	/*
	 * Don't take the exclusive iolock here unless the I/O is unaligned to
	 * the file system block size.  We don't need to consider the EOF
	 * extension case here because xfs_file_aio_write_checks() will relock
	 * the inode as necessary for EOF zeroing cases and fill out the new
	 * inode size as appropriate.
	 */
	if ((iocb->ki_pos & mp->m_blockmask) ||
	    ((iocb->ki_pos + count) & mp->m_blockmask)) {
		unaligned_io = 1;

		/*
		 * We can't properly handle unaligned direct I/O to reflink
		 * files yet, as we can't unshare a partial block.
		 */
		if (xfs_is_reflink_inode(ip)) {
			trace_xfs_reflink_bounce_dio_write(ip, iocb->ki_pos, count);
			return -EREMCHG;
		}
		iolock = XFS_IOLOCK_EXCL;
	} else {
		iolock = XFS_IOLOCK_SHARED;
	}

	if (iocb->ki_flags & IOCB_NOWAIT) {
		if (!xfs_ilock_nowait(ip, iolock))
			return -EAGAIN;
	} else {
		xfs_ilock(ip, iolock);
	}

	ret = xfs_file_aio_write_checks(iocb, from, &iolock);
	if (ret)
		goto out;
	count = iov_iter_count(from);

	/*
	 * If we are doing unaligned IO, wait for all other IO to drain,
	 * otherwise demote the lock if we had to take the exclusive lock
	 * for other reasons in xfs_file_aio_write_checks.
	 */
	if (unaligned_io) {
		/* If we are going to wait for other DIO to finish, bail */
		if (iocb->ki_flags & IOCB_NOWAIT) {
			if (atomic_read(&inode->i_dio_count))
				return -EAGAIN;
		} else {
			inode_dio_wait(inode);
		}
	} else if (iolock == XFS_IOLOCK_EXCL) {
		xfs_ilock_demote(ip, XFS_IOLOCK_EXCL);
		iolock = XFS_IOLOCK_SHARED;
	}

	trace_xfs_file_direct_write(ip, count, iocb->ki_pos);
	ret = iomap_dio_rw(iocb, from, &xfs_iomap_ops, xfs_dio_write_end_io);
out:
	xfs_iunlock(ip, iolock);

	/*
	 * No fallback to buffered IO on errors for XFS, direct IO will either
	 * complete fully or fail.
	 */
	ASSERT(ret < 0 || ret == count);
	return ret;
}
コード例 #23
0
ファイル: read_write.c プロジェクト: Anjali05/linux
/*
 * Check that the two inodes are eligible for cloning, the ranges make
 * sense, and then flush all dirty data.  Caller must ensure that the
 * inodes have been locked against any other modifications.
 *
 * If there's an error, then the usual negative error code is returned.
 * Otherwise returns 0 with *len set to the request length.
 */
int generic_remap_file_range_prep(struct file *file_in, loff_t pos_in,
				  struct file *file_out, loff_t pos_out,
				  loff_t *len, unsigned int remap_flags)
{
	struct inode *inode_in = file_inode(file_in);
	struct inode *inode_out = file_inode(file_out);
	bool same_inode = (inode_in == inode_out);
	int ret;

	/* Don't touch certain kinds of inodes */
	if (IS_IMMUTABLE(inode_out))
		return -EPERM;

	if (IS_SWAPFILE(inode_in) || IS_SWAPFILE(inode_out))
		return -ETXTBSY;

	/* Don't reflink dirs, pipes, sockets... */
	if (S_ISDIR(inode_in->i_mode) || S_ISDIR(inode_out->i_mode))
		return -EISDIR;
	if (!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode))
		return -EINVAL;

	/* Zero length dedupe exits immediately; reflink goes to EOF. */
	if (*len == 0) {
		loff_t isize = i_size_read(inode_in);

		if ((remap_flags & REMAP_FILE_DEDUP) || pos_in == isize)
			return 0;
		if (pos_in > isize)
			return -EINVAL;
		*len = isize - pos_in;
		if (*len == 0)
			return 0;
	}

	/* Check that we don't violate system file offset limits. */
	ret = generic_remap_checks(file_in, pos_in, file_out, pos_out, len,
			remap_flags);
	if (ret)
		return ret;

	/* Wait for the completion of any pending IOs on both files */
	inode_dio_wait(inode_in);
	if (!same_inode)
		inode_dio_wait(inode_out);

	ret = filemap_write_and_wait_range(inode_in->i_mapping,
			pos_in, pos_in + *len - 1);
	if (ret)
		return ret;

	ret = filemap_write_and_wait_range(inode_out->i_mapping,
			pos_out, pos_out + *len - 1);
	if (ret)
		return ret;

	/*
	 * Check that the extents are the same.
	 */
	if (remap_flags & REMAP_FILE_DEDUP) {
		bool		is_same = false;

		ret = vfs_dedupe_file_range_compare(inode_in, pos_in,
				inode_out, pos_out, *len, &is_same);
		if (ret)
			return ret;
		if (!is_same)
			return -EBADE;
	}

	ret = generic_remap_check_len(inode_in, inode_out, pos_out, len,
			remap_flags);
	if (ret)
		return ret;

	/* If can't alter the file contents, we're done. */
	if (!(remap_flags & REMAP_FILE_DEDUP)) {
		/* Update the timestamps, since we can alter file contents. */
		if (!(file_out->f_mode & FMODE_NOCMTIME)) {
			ret = file_update_time(file_out);
			if (ret)
				return ret;
		}

		/*
		 * Clear the security bits if the process is not being run by
		 * root.  This keeps people from modifying setuid and setgid
		 * binaries.
		 */
		ret = file_remove_privs(file_out);
		if (ret)
			return ret;
	}

	return 0;
}
コード例 #24
0
/**
 * Swap the information from the given @inode and the inode
 * EXT4_BOOT_LOADER_INO. It will basically swap i_data and all other
 * important fields of the inodes.
 *
 * @sb:         the super block of the filesystem
 * @inode:      the inode to swap with EXT4_BOOT_LOADER_INO
 *
 */
static long swap_inode_boot_loader(struct super_block *sb,
				struct inode *inode)
{
	handle_t *handle;
	int err;
	struct inode *inode_bl;
	struct ext4_inode_info *ei_bl;
	struct ext4_sb_info *sbi = EXT4_SB(sb);

	if (inode->i_nlink != 1 || !S_ISREG(inode->i_mode)) {
		err = -EINVAL;
		goto swap_boot_out;
	}

	if (!inode_owner_or_capable(inode) || !capable(CAP_SYS_ADMIN)) {
		err = -EPERM;
		goto swap_boot_out;
	}

	inode_bl = ext4_iget(sb, EXT4_BOOT_LOADER_INO);
	if (IS_ERR(inode_bl)) {
		err = PTR_ERR(inode_bl);
		goto swap_boot_out;
	}
	ei_bl = EXT4_I(inode_bl);

	filemap_flush(inode->i_mapping);
	filemap_flush(inode_bl->i_mapping);

	/* Protect orig inodes against a truncate and make sure,
	 * that only 1 swap_inode_boot_loader is running. */
	lock_two_nondirectories(inode, inode_bl);

	truncate_inode_pages(&inode->i_data, 0);
	truncate_inode_pages(&inode_bl->i_data, 0);

	/* Wait for all existing dio workers */
	ext4_inode_block_unlocked_dio(inode);
	ext4_inode_block_unlocked_dio(inode_bl);
	inode_dio_wait(inode);
	inode_dio_wait(inode_bl);

	handle = ext4_journal_start(inode_bl, EXT4_HT_MOVE_EXTENTS, 2);
	if (IS_ERR(handle)) {
		err = -EINVAL;
		goto journal_err_out;
	}

	/* Protect extent tree against block allocations via delalloc */
	ext4_double_down_write_data_sem(inode, inode_bl);

	if (inode_bl->i_nlink == 0) {
		/* this inode has never been used as a BOOT_LOADER */
		set_nlink(inode_bl, 1);
		i_uid_write(inode_bl, 0);
		i_gid_write(inode_bl, 0);
		inode_bl->i_flags = 0;
		ei_bl->i_flags = 0;
		inode_bl->i_version = 1;
		i_size_write(inode_bl, 0);
		inode_bl->i_mode = S_IFREG;
		if (EXT4_HAS_INCOMPAT_FEATURE(sb,
					      EXT4_FEATURE_INCOMPAT_EXTENTS)) {
			ext4_set_inode_flag(inode_bl, EXT4_INODE_EXTENTS);
			ext4_ext_tree_init(handle, inode_bl);
		} else
			memset(ei_bl->i_data, 0, sizeof(ei_bl->i_data));
	}

	swap_inode_data(inode, inode_bl);

	inode->i_ctime = inode_bl->i_ctime = ext4_current_time(inode);

	spin_lock(&sbi->s_next_gen_lock);
	inode->i_generation = sbi->s_next_generation++;
	inode_bl->i_generation = sbi->s_next_generation++;
	spin_unlock(&sbi->s_next_gen_lock);

	ext4_discard_preallocations(inode);

	err = ext4_mark_inode_dirty(handle, inode);
	if (err < 0) {
		ext4_warning(inode->i_sb,
			"couldn't mark inode #%lu dirty (err %d)",
			inode->i_ino, err);
		/* Revert all changes: */
		swap_inode_data(inode, inode_bl);
	} else {
		err = ext4_mark_inode_dirty(handle, inode_bl);
		if (err < 0) {
			ext4_warning(inode_bl->i_sb,
				"couldn't mark inode #%lu dirty (err %d)",
				inode_bl->i_ino, err);
			/* Revert all changes: */
			swap_inode_data(inode, inode_bl);
			ext4_mark_inode_dirty(handle, inode);
		}
	}

	ext4_journal_stop(handle);

	ext4_double_up_write_data_sem(inode, inode_bl);

journal_err_out:
	ext4_inode_resume_unlocked_dio(inode);
	ext4_inode_resume_unlocked_dio(inode_bl);

	unlock_two_nondirectories(inode, inode_bl);

	iput(inode_bl);

swap_boot_out:
	return err;
}
コード例 #25
0
ファイル: read_write.c プロジェクト: oscardagrach/linux
/*
 * Check that the two inodes are eligible for cloning, the ranges make
 * sense, and then flush all dirty data.  Caller must ensure that the
 * inodes have been locked against any other modifications.
 *
 * Returns: 0 for "nothing to clone", 1 for "something to clone", or
 * the usual negative error code.
 */
int vfs_clone_file_prep_inodes(struct inode *inode_in, loff_t pos_in,
			       struct inode *inode_out, loff_t pos_out,
			       u64 *len, bool is_dedupe)
{
	loff_t bs = inode_out->i_sb->s_blocksize;
	loff_t blen;
	loff_t isize;
	bool same_inode = (inode_in == inode_out);
	int ret;

	/* Don't touch certain kinds of inodes */
	if (IS_IMMUTABLE(inode_out))
		return -EPERM;

	if (IS_SWAPFILE(inode_in) || IS_SWAPFILE(inode_out))
		return -ETXTBSY;

	/* Don't reflink dirs, pipes, sockets... */
	if (S_ISDIR(inode_in->i_mode) || S_ISDIR(inode_out->i_mode))
		return -EISDIR;
	if (!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode))
		return -EINVAL;

	/* Are we going all the way to the end? */
	isize = i_size_read(inode_in);
	if (isize == 0)
		return 0;

	/* Zero length dedupe exits immediately; reflink goes to EOF. */
	if (*len == 0) {
		if (is_dedupe || pos_in == isize)
			return 0;
		if (pos_in > isize)
			return -EINVAL;
		*len = isize - pos_in;
	}

	/* Ensure offsets don't wrap and the input is inside i_size */
	if (pos_in + *len < pos_in || pos_out + *len < pos_out ||
	    pos_in + *len > isize)
		return -EINVAL;

	/* Don't allow dedupe past EOF in the dest file */
	if (is_dedupe) {
		loff_t	disize;

		disize = i_size_read(inode_out);
		if (pos_out >= disize || pos_out + *len > disize)
			return -EINVAL;
	}

	/* If we're linking to EOF, continue to the block boundary. */
	if (pos_in + *len == isize)
		blen = ALIGN(isize, bs) - pos_in;
	else
		blen = *len;

	/* Only reflink if we're aligned to block boundaries */
	if (!IS_ALIGNED(pos_in, bs) || !IS_ALIGNED(pos_in + blen, bs) ||
	    !IS_ALIGNED(pos_out, bs) || !IS_ALIGNED(pos_out + blen, bs))
		return -EINVAL;

	/* Don't allow overlapped reflink within the same file */
	if (same_inode) {
		if (pos_out + blen > pos_in && pos_out < pos_in + blen)
			return -EINVAL;
	}

	/* Wait for the completion of any pending IOs on both files */
	inode_dio_wait(inode_in);
	if (!same_inode)
		inode_dio_wait(inode_out);

	ret = filemap_write_and_wait_range(inode_in->i_mapping,
			pos_in, pos_in + *len - 1);
	if (ret)
		return ret;

	ret = filemap_write_and_wait_range(inode_out->i_mapping,
			pos_out, pos_out + *len - 1);
	if (ret)
		return ret;

	/*
	 * Check that the extents are the same.
	 */
	if (is_dedupe) {
		bool		is_same = false;

		ret = vfs_dedupe_file_range_compare(inode_in, pos_in,
				inode_out, pos_out, *len, &is_same);
		if (ret)
			return ret;
		if (!is_same)
			return -EBADE;
	}

	return 1;
}