コード例 #1
0
// Execute an instruction cycle
//   Fetch an instruction
//   Decode the instruction opcode
//   Execute the instruction
//
void instruction_cycle(CPU *cpu) {
	// Get current instruction to execute and its loc,
	// echo them out.
	//
	Address old_pc = cpu->pgm_counter;
	fetch_instr(cpu);
	printf("x%04hX: x%04hX  ", old_pc, cpu->instr_reg);

	// Execute instruction; set cpu running = 0 if CPU execution
	// is to stop (because of TRAP HALT or an internal error).
	//

	//>>>>>>>>>>>>>>>>SWITCH CASE MUST BE EDITED  Compliar error
	switch (cpu->instr_reg) {
	case  0: instr_BR(cpu);   break;
    case  1: instr_ADD(cpu);   break;
    case  2: instr_LD(cpu);   break;
    case  3: instr_ST(cpu);   break;
    case  4: instr_JSR(cpu);   break;
    case  5: instr_AND(cpu);   break;
    case  6: instr_LDR(cpu);   break;
    case  7: instr_STR(cpu);   break;
    case  8: instr_RTI(cpu);   break;
    case  9: instr_NOT(cpu);   break;
    case  10: instr_LDI(cpu);   break;
    case  11: instr_STI(cpu);   break;
    case  12: instr_RTI(cpu);   break;
    case  13: instr_STI(cpu);   break;
    case  14: instr_LEA(cpu);   break;
	case  15: instr_TRAP(cpu);   break;
    default: printf("Bad opcode: %d; quitting\n", op(cpu->instr_reg)); cpu->running = 0; break;
        }
}
コード例 #2
0
ファイル: WHuang_Final_project.c プロジェクト: coxlee/study
// Execute an instruction cycle
//   Fetch an instruction
//   Decode the instruction opcode
//   Execute the instruction
//
void instruction_cycle(CPU *cpu) {
	// Get current instruction to execute and its location,
	// echo them out.
	//
	Address old_pc = cpu->pgm_counter;
	fetch_instr(cpu);
	printf("x%04hX: x%04hX  \n", old_pc, cpu->instr_reg);

	// Execute instruction; set halt = 1 if execution is to stop
	// (TRAP HALT or internal error).
	//
	switch (op(cpu->instr_reg)) {
	case  0: instr_BR(cpu);   break;
	case  1: instr_ADD(cpu);   break;
	case  2: instr_LD(cpu);   break;
	case  3: instr_ST(cpu);   break;
	case  4: instr_JSR(cpu);   break;
	case  5: instr_AND(cpu);   break;
	case  6: instr_LDR(cpu);   break;
	case  7: instr_STR(cpu);   break;
	case  8: instr_RTI(cpu);   break;
	case  9: instr_NOT(cpu);   break;
	case  10: instr_LDI(cpu);   break;
	case  11: instr_STI(cpu);   break;
	case  12: instr_RTI(cpu);   break;
	case  13: instr_STI(cpu);   break;
	case  14: instr_LEA(cpu);   break;
	case  15: instr_TRAP(cpu);   break;
	default: printf("Bad opcode: %d; quitting\n", op(cpu->instr_reg)); cpu->running = 0; break;
	}
}
void instruction_cycle(CPU *cpu, int order)
{
 // Get current instruction to execute and its location,
 // echo them out.
 //
    Address old_pc = cpu->memory[cpu->pgm_counter+1]; // OLD: cpu->pgm_counter
    fetch_instr(cpu);
    
    int op_code = 0;
    u_reg = ((unsigned short int)(cpu->instr_reg));
	op_code = u_reg/4096;
    
    unsigned short movement1 = (old_pc << 4);
    unsigned short movement2 = (old_pc << 7);
    unsigned short movement3 = (old_pc << 12);
    unsigned short movement4 = (old_pc << 7);
    unsigned short movement5 = (old_pc << 13);
    
    Commands.opCode = (old_pc >> 12); // Finished
    
    Commands.intRest =  (old_pc << 8); // Finished
    Commands.trap = (Commands.intRest >> 8); // Finished
    
    Commands.NZP    =   (movement1 >> 13);
    Commands.offset =   (movement2 >> 7);
    Commands.last   =   (movement3 >> 12);
    Commands.Src1   =   (movement4 >> 6);
    Commands.Src2   =   (movement5 >> 13);
    
    
    /* Tests
     
    Output bit shifts
     
     
    printf("\nShowing whats in memory, dividing integers:\n\n");
    printf("First Hex: %hX\n", Commands.opCode);
    printf("Second Hex: %hX\n", Commands.intSecond);
    //printf("Remaining Hex: %hX\n", intRest);
    printf("NZP value: %hX\n", Commands.NZP);
    printf("offset value: %hX\n", Commands.offset);
    printf("Trap value (last 2 digits): %hX\n", Commands.trap);
    printf("Last value: %hX\n", Commands.last);
    */
     
    
 // Execute instruction; set halt = 1 if execution is to stop
 // (TRAP HALT or internal error).
 //
    switch ((Commands.opCode)) // ** Note ** place "op(cpu->instr_reg))"
    {
        case  0:
            if (Commands.NZP > 0){
                // Command loop that accounts for P and Z
                // Removed because of the lack of time
                
                /*if(Commands.NZP == 2){
                    printf("BRZ  3, CC = P, no go to\n");
                    //cpu->pgm_counter--;
                }
                else{ */
                order ++;
                printf("x%04X: x%04hX  ", order, old_pc);   // print location
                cpu->pgm_counter = cpu->pgm_counter + Commands.last;
                printf("BR   %d, CC = Z, go to x%04X+%d = x%04X\n", Commands.last, order, (signed short)Commands.last, (order + Commands.last));
                order = order + Commands.last;
            }
            else{
            instr_BR(cpu);
            }
            break;
            
        case 1:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_ADD(cpu);
            break;
            
        case 2:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_LD(cpu, order);
            break;
            
        case 3:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_ST(cpu, order);
            break;
            
        case 4:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_JSR(cpu);
            break;
            
        case 5:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_AND(cpu);
            break;
            
        case 6:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_LDR(cpu);
            break;
            
        case 7:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_STR(cpu);
            break;
            
        case 8:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_RTI(cpu);
            break;
            
        case 9:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_NOT(cpu);
            break;
            
        case 10:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_LDI(cpu);
            break;
            
        case 11:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_STI(cpu);
            break;
            
        case 12:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_JMP(cpu);
            break;
            
        case 13:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_err(cpu);
            break;
            
        case 14:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_LEA(cpu, order);
            break;
            
        case 15:
            printf("x%04X: x%04hX  ", order, old_pc);
            instr_TRAP(cpu);
            break;
            
            
        default:
            printf("Bad opcode: %d; quitting\n", (Commands.opCode)); // ** Note ** place "op(cpu->instr_reg))"
            cpu->running = 0;
    }
    old_pc++;
    
}