static int late_hwdom_init(struct domain *d)
{
#ifdef CONFIG_LATE_HWDOM
struct domain *dom0;
int rv;
if ( d != hardware_domain || d->domain_id == 0 )
return 0;
rv = xsm_init_hardware_domain(XSM_HOOK, d);
if ( rv )
return rv;
printk("Initialising hardware domain %d\n", hardware_domid);
dom0 = rcu_lock_domain_by_id(0);
ASSERT(dom0 != NULL);
/*
* Hardware resource ranges for domain 0 have been set up from
* various sources intended to restrict the hardware domain's
* access. Apply these ranges to the actual hardware domain.
*
* Because the lists are being swapped, a side effect of this
* operation is that Domain 0's rangesets are cleared. Since
* domain 0 should not be accessing the hardware when it constructs
* a hardware domain, this should not be a problem. Both lists
* may be modified after this hypercall returns if a more complex
* device model is desired.
*/
rangeset_swap(d->irq_caps, dom0->irq_caps);
rangeset_swap(d->iomem_caps, dom0->iomem_caps);
#ifdef CONFIG_X86
rangeset_swap(d->arch.ioport_caps, dom0->arch.ioport_caps);
#endif
rcu_unlock_domain(dom0);
iommu_hwdom_init(d);
return rv;
#else
return 0;
#endif
}
static int __init pvh_setup_acpi(struct domain *d, paddr_t start_info)
{
unsigned long pfn, nr_pages;
paddr_t madt_paddr, xsdt_paddr, rsdp_paddr;
unsigned int i;
int rc;
struct acpi_table_rsdp *native_rsdp, rsdp = {
.signature = ACPI_SIG_RSDP,
.revision = 2,
.length = sizeof(rsdp),
};
/* Scan top-level tables and add their regions to the guest memory map. */
for( i = 0; i < acpi_gbl_root_table_list.count; i++ )
{
const char *sig = acpi_gbl_root_table_list.tables[i].signature.ascii;
unsigned long addr = acpi_gbl_root_table_list.tables[i].address;
unsigned long size = acpi_gbl_root_table_list.tables[i].length;
/*
* Make sure the original MADT is also mapped, so that Dom0 can
* properly access the data returned by _MAT methods in case it's
* re-using MADT memory.
*/
if ( strncmp(sig, ACPI_SIG_MADT, ACPI_NAME_SIZE)
? pvh_acpi_table_allowed(sig)
: !acpi_memory_banned(addr, size) )
pvh_add_mem_range(d, addr, addr + size, E820_ACPI);
}
/* Identity map ACPI e820 regions. */
for ( i = 0; i < d->arch.nr_e820; i++ )
{
if ( d->arch.e820[i].type != E820_ACPI &&
d->arch.e820[i].type != E820_NVS )
continue;
pfn = PFN_DOWN(d->arch.e820[i].addr);
nr_pages = PFN_UP((d->arch.e820[i].addr & ~PAGE_MASK) +
d->arch.e820[i].size);
rc = modify_identity_mmio(d, pfn, nr_pages, true);
if ( rc )
{
printk("Failed to map ACPI region [%#lx, %#lx) into Dom0 memory map\n",
pfn, pfn + nr_pages);
return rc;
}
}
rc = pvh_setup_acpi_madt(d, &madt_paddr);
if ( rc )
return rc;
rc = pvh_setup_acpi_xsdt(d, madt_paddr, &xsdt_paddr);
if ( rc )
return rc;
/* Craft a custom RSDP. */
native_rsdp = acpi_os_map_memory(acpi_os_get_root_pointer(), sizeof(rsdp));
if ( !native_rsdp )
{
printk("Failed to map native RSDP\n");
return -ENOMEM;
}
memcpy(rsdp.oem_id, native_rsdp->oem_id, sizeof(rsdp.oem_id));
acpi_os_unmap_memory(native_rsdp, sizeof(rsdp));
rsdp.xsdt_physical_address = xsdt_paddr;
/*
* Calling acpi_tb_checksum here is a layering violation, but
* introducing a wrapper for such simple usage seems overkill.
*/
rsdp.checksum -= acpi_tb_checksum(ACPI_CAST_PTR(u8, &rsdp),
ACPI_RSDP_REV0_SIZE);
rsdp.extended_checksum -= acpi_tb_checksum(ACPI_CAST_PTR(u8, &rsdp),
sizeof(rsdp));
/*
* Place the new RSDP in guest memory space.
*
* NB: this RSDP is not going to replace the original RSDP, which should
* still be accessible to the guest. However that RSDP is going to point to
* the native RSDT, and should not be used for the Dom0 kernel's boot
* purposes (we keep it visible for post boot access).
*/
if ( pvh_steal_ram(d, sizeof(rsdp), 0, GB(4), &rsdp_paddr) )
{
printk("Unable to allocate guest RAM for RSDP\n");
return -ENOMEM;
}
/* Mark this region as E820_ACPI. */
if ( pvh_add_mem_range(d, rsdp_paddr, rsdp_paddr + sizeof(rsdp),
E820_ACPI) )
printk("Unable to add RSDP region to memory map\n");
/* Copy RSDP into guest memory. */
rc = hvm_copy_to_guest_phys(rsdp_paddr, &rsdp, sizeof(rsdp), d->vcpu[0]);
if ( rc )
{
printk("Unable to copy RSDP into guest memory\n");
return rc;
}
/* Copy RSDP address to start_info. */
rc = hvm_copy_to_guest_phys(start_info +
offsetof(struct hvm_start_info, rsdp_paddr),
&rsdp_paddr,
sizeof(((struct hvm_start_info *)
0)->rsdp_paddr),
d->vcpu[0]);
if ( rc )
{
printk("Unable to copy RSDP into guest memory\n");
return rc;
}
return 0;
}
int __init dom0_construct_pvh(struct domain *d, const module_t *image,
unsigned long image_headroom,
module_t *initrd,
void *(*bootstrap_map)(const module_t *),
char *cmdline)
{
paddr_t entry, start_info;
int rc;
printk("** Building a PVH Dom0 **\n");
iommu_hwdom_init(d);
rc = pvh_setup_p2m(d);
if ( rc )
{
printk("Failed to setup Dom0 physical memory map\n");
return rc;
}
rc = pvh_load_kernel(d, image, image_headroom, initrd, bootstrap_map(image),
cmdline, &entry, &start_info);
if ( rc )
{
printk("Failed to load Dom0 kernel\n");
return rc;
}
rc = pvh_setup_cpus(d, entry, start_info);
if ( rc )
{
printk("Failed to setup Dom0 CPUs: %d\n", rc);
return rc;
}
rc = pvh_setup_acpi(d, start_info);
if ( rc )
{
printk("Failed to setup Dom0 ACPI tables: %d\n", rc);
return rc;
}
panic("Building a PVHv2 Dom0 is not yet supported.");
return 0;
}