コード例 #1
0
int_t main(void)
{
    error_t error;
    NetInterface *interface;
    OsTask *task;
    MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
    Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
    Ipv6Addr ipv6Addr;
#endif

    //MPU configuration
    MPU_Config();
    //HAL library initialization
    HAL_Init();
    //Configure the system clock
    SystemClock_Config();

    //Enable I-cache and D-cache
    SCB_EnableICache();
    SCB_EnableDCache();

    //Initialize kernel
    osInitKernel();
    //Configure debug UART
    debugInit(115200);

    //Start-up message
    TRACE_INFO("\r\n");
    TRACE_INFO("**********************************\r\n");
    TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
    TRACE_INFO("**********************************\r\n");
    TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
    TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
    TRACE_INFO("Target: STM32F746\r\n");
    TRACE_INFO("\r\n");

    //LED configuration
    BSP_LED_Init(LED1);
    //Clear LEDs
    BSP_LED_Off(LED1);

    //Initialize user button
    BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

    //Initialize LCD display
    BSP_LCD_Init();
    BSP_LCD_LayerDefaultInit(0, LCD_FRAME_BUFFER_LAYER0);
    BSP_LCD_SelectLayer(0);
    BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
    BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
    BSP_LCD_SetFont(&Font24);
    BSP_LCD_DisplayOn();

    //Clear LCD display
    BSP_LCD_Clear(LCD_COLOR_BLUE);

    //Welcome message
    lcdSetCursor(0, 0);
    printf("FTP Client Demo\r\n");

    //TCP/IP stack initialization
    error = netInit();
    //Any error to report?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
    }

    //Configure the first Ethernet interface
    interface = &netInterface[0];

    //Set interface name
    netSetInterfaceName(interface, "eth0");
    //Set host name
    netSetHostname(interface, "FTPClientDemo");
    //Select the relevant network adapter
    netSetDriver(interface, &stm32f7xxEthDriver);
    netSetPhyDriver(interface, &lan8742PhyDriver);
    //Set host MAC address
    macStringToAddr(APP_MAC_ADDR, &macAddr);
    netSetMacAddr(interface, &macAddr);

    //Initialize network interface
    error = netConfigInterface(interface);
    //Any error to report?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
    }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
    //Get default settings
    dhcpClientGetDefaultSettings(&dhcpClientSettings);
    //Set the network interface to be configured by DHCP
    dhcpClientSettings.interface = interface;
    //Disable rapid commit option
    dhcpClientSettings.rapidCommit = FALSE;

    //DHCP client initialization
    error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
    //Failed to initialize DHCP client?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize DHCP client!\r\n");
    }

    //Start DHCP client
    error = dhcpClientStart(&dhcpClientContext);
    //Failed to start DHCP client?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start DHCP client!\r\n");
    }
#else
    //Set IPv4 host address
    ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
    ipv4SetHostAddr(interface, ipv4Addr);

    //Set subnet mask
    ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
    ipv4SetSubnetMask(interface, ipv4Addr);

    //Set default gateway
    ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
    ipv4SetDefaultGateway(interface, ipv4Addr);

    //Set primary and secondary DNS servers
    ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
    ipv4SetDnsServer(interface, 0, ipv4Addr);
    ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
    ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
    //Get default settings
    slaacGetDefaultSettings(&slaacSettings);
    //Set the network interface to be configured
    slaacSettings.interface = interface;

    //SLAAC initialization
    error = slaacInit(&slaacContext, &slaacSettings);
    //Failed to initialize SLAAC?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize SLAAC!\r\n");
    }

    //Start IPv6 address autoconfiguration process
    error = slaacStart(&slaacContext);
    //Failed to start SLAAC process?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start SLAAC!\r\n");
    }
#else
    //Set link-local address
    ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
    ipv6SetLinkLocalAddr(interface, &ipv6Addr);

    //Set IPv6 prefix
    ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
    ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

    //Set global address
    ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
    ipv6SetGlobalAddr(interface, &ipv6Addr);

    //Set router
    ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
    ipv6SetRouter(interface, &ipv6Addr);

    //Set primary and secondary DNS servers
    ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
    ipv6SetDnsServer(interface, 0, &ipv6Addr);
    ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
    ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

    //Create user task
    task = osCreateTask("User Task", userTask, NULL, 500, 1);
    //Failed to create the task?
    if(task == OS_INVALID_HANDLE)
    {
        //Debug message
        TRACE_ERROR("Failed to create task!\r\n");
    }

    //Create a task to blink the LED
    task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
    //Failed to create the task?
    if(task == OS_INVALID_HANDLE)
    {
        //Debug message
        TRACE_ERROR("Failed to create task!\r\n");
    }

    //Start the execution of tasks
    osStartKernel();

    //This function should never return
    return 0;
}
コード例 #2
0
ファイル: main.c プロジェクト: nandojve/embedded
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //Update system core clock
   SystemCoreClockUpdate();

   //Initialize kernel
   osInitKernel();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: MK60N512MD100\r\n");
   TRACE_INFO("\r\n");

   //Configure I/Os
   ioInit();

   //TCP/IP stack initialization
   error = tcpIpStackInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   tcpIpStackSetInterfaceName(interface, "eth0");
   //Set host name
   tcpIpStackSetHostname(interface, "FTPClientDemo");
   //Select the relevant network adapter
   tcpIpStackSetDriver(interface, &mk60EthDriver);
   tcpIpStackSetPhyDriver(interface, &ksz8041PhyDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   tcpIpStackSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = tcpIpStackConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Create a task to blink the LED
   task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #3
0
ファイル: main.c プロジェクト: nandojve/embedded
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //Initialize kernel
   osInitKernel();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: SAM3X\r\n");
   TRACE_INFO("\r\n");

   //Configure I/Os
   ioInit();
   //ADC initialization
   adcInit();

   //Initialize LCD display
   GLCD_Init();
   GLCD_SetBackColor(Blue);
   GLCD_SetTextColor(White);
   GLCD_Clear(Blue);

   //Welcome message
   lcdSetCursor(0, 0);
   printf("Web Server Demo\r\n");

   //Generate a random seed

   //PRNG initialization
   error = yarrowInit(&yarrowContext);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize PRNG!\r\n");
   }

   //Properly seed the PRNG
   error = yarrowSeed(&yarrowContext, seed, sizeof(seed));
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to seed PRNG!\r\n");
   }

   //TCP/IP stack initialization
   error = tcpIpStackInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   tcpIpStackSetInterfaceName(interface, "eth0");
   //Set host name
   tcpIpStackSetHostname(interface, "WebServerDemo");
   //Select the relevant network adapter
   tcpIpStackSetDriver(interface, &sam3xEthDriver);
   tcpIpStackSetPhyDriver(interface, &dm9161PhyDriver);
   //Set external interrupt line driver
   tcpIpStackSetExtIntDriver(interface, &extIntDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   tcpIpStackSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = tcpIpStackConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Get default settings
   httpServerGetDefaultSettings(&httpServerSettings);
   //Bind HTTP server to the desired interface
   httpServerSettings.interface = &netInterface[0];
   //Listen to port 80
   httpServerSettings.port = HTTP_PORT;
   //Specify the server's root directory
   strcpy(httpServerSettings.rootDirectory, "/www/");
   //Set default home page
   strcpy(httpServerSettings.defaultDocument, "index.shtm");
   //Callback functions
   httpServerSettings.authCallback = httpServerAuthCallback;
   httpServerSettings.cgiCallback = httpServerCgiCallback;
   httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;

   //HTTP server initialization
   error = httpServerInit(&httpServerContext, &httpServerSettings);
   //Failed to initialize HTTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize HTTP server!\r\n");
   }

   //Start HTTP server
   error = httpServerStart(&httpServerContext);
   //Failed to start HTTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start HTTP server!\r\n");
   }

   //Start TCP echo service
   error = tcpEchoStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start TCP echo service!\r\n");
   }

   //Start UDP echo service
   error = udpEchoStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start UDP echo service!\r\n");
   }

   //Start TCP discard service
   error = tcpDiscardStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start TCP discard service!\r\n");
   }

   //Start UDP discard service
   error = udpDiscardStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start UDP discard service!\r\n");
   }

   //Start TCP chargen service
   error = tcpChargenStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start TCP chargen service!\r\n");
   }

   //Start UDP chargen service
   error = udpChargenStart();
   //Failed to TCP echo service?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start UDP chargen service!\r\n");
   }

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Create a task to blink the LED
   task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #4
0
ファイル: main.c プロジェクト: frankzzcn/M2_SE_RTOS_Project
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //Initialize kernel
   osInitKernel();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("******************************\r\n");
   TRACE_INFO("*** CycloneSSL Client Demo ***\r\n");
   TRACE_INFO("******************************\r\n");
   TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: AT32UC3A0512\r\n");
   TRACE_INFO("\r\n");

   //Configure I/Os
   ioInit();

   //Initialize LCD display
   /*GLCD_Init();
   GLCD_SetBackColor(Blue);
   GLCD_SetTextColor(White);
   GLCD_Clear(Blue);*/

   //Welcome message
   lcdSetCursor(0, 0);
   printf("SSL Client Demo\r\n");

   //Generate a random seed

   //PRNG initialization
   error = yarrowInit(&yarrowContext);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize PRNG!\r\n");
   }

   //Properly seed the PRNG
   error = yarrowSeed(&yarrowContext, seed, sizeof(seed));
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to seed PRNG!\r\n");
   }

   //Debug message
   TRACE_INFO("Loading credentials...\r\n");

   //Start of exception handling block
   do
   {
      //Load trusted CA certificates
      error = resGetData(APP_CA_CERT_BUNDLE, (uint8_t **) &trustedCaList, &trustedCaListLength);
      //Any error to report?
      if(error) break;

      //Load client's certificate
      error = resGetData(APP_CLIENT_CERT, (uint8_t **) &clientCert, &clientCertLength);
      //Any error to report?
      if(error) break;

      //Load client's private key
      error = resGetData(APP_CLIENT_PRIVATE_KEY, (uint8_t **) &clientPrivateKey, &clientPrivateKeyLength);
      //Any error to report?
      if(error) break;

      //End of exception handling block
   } while(0);

   //Check error code
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to load credentials!\r\n");
   }

   //TCP/IP stack initialization
   error = netInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   netSetInterfaceName(interface, "eth0");
   //Set host name
   netSetHostname(interface, "SSLClientDemo");
   //Select the relevant network adapter
   netSetDriver(interface, &avr32EthDriver);
   netSetPhyDriver(interface, &dp83848PhyDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   netSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = netConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 850, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Create a task to blink the LED
   task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #5
0
ファイル: slaac.c プロジェクト: nandojve/embedded
void slaacProcessRouterAdv(SlaacContext *context,
   const Ipv6Addr *srcAddr, NdpRouterAdvMessage *message, size_t length)
{
   uint_t i;
   uint_t n;
   NdpPrefixInfoOption *prefixInfoOption;
   NdpRdnssOption *rdnssOption;
   Eui64 interfaceId;
   Ipv6Addr globalAddr;

   //Check current state
   if(context->state != SLAAC_STATE_ROUTER_SOLICIT)
      return;

   //Save router address
   ipv6SetRouter(context->interface, srcAddr);

   //Calculate the length of the Options field
   length -= sizeof(NdpRouterAdvMessage);

   //Search for the Prefix Information option
   prefixInfoOption = ndpGetOption(message->options, length, NDP_OPT_PREFIX_INFORMATION);

   //Prefix Information option not found?
   if(prefixInfoOption == NULL || prefixInfoOption->length != 4)
      return;

   //If the Autonomous flag is not set, silently ignore the Prefix
   //Information option
   if(!prefixInfoOption->a)
      return;

   //If the prefix is the link-local prefix, silently ignore the
   //Prefix Information option
   if(ipv6CompPrefix(&prefixInfoOption->prefix, &IPV6_LINK_LOCAL_ADDR_PREFIX, 64))
      return;

   //If the preferred lifetime is greater than the valid lifetime,
   //silently ignore the Prefix Information option
   if(prefixInfoOption->preferredLifetime > prefixInfoOption->validLifetime)
      return;

   //If the sum of the prefix length and interface identifier length does
   //not equal 128 bits, the Prefix Information option must be ignored
   if(prefixInfoOption->prefixLength != 64)
      return;

   //Save IPv6 prefix
   ipv6SetPrefix(context->interface, &prefixInfoOption->prefix,
      prefixInfoOption->prefixLength);

   //Generate the 64-bit interface identifier
   macAddrToEui64(&context->interface->macAddr, &interfaceId);

   //Form an address by combining the advertised prefix
   //with the interface identifier
   globalAddr.w[0] = prefixInfoOption->prefix.w[0];
   globalAddr.w[1] = prefixInfoOption->prefix.w[1];
   globalAddr.w[2] = prefixInfoOption->prefix.w[2];
   globalAddr.w[3] = prefixInfoOption->prefix.w[3];
   globalAddr.w[4] = interfaceId.w[0];
   globalAddr.w[5] = interfaceId.w[1];
   globalAddr.w[6] = interfaceId.w[2];
   globalAddr.w[7] = interfaceId.w[3];

   //Use the global address as a tentative address
   ipv6SetGlobalAddr(context->interface, &globalAddr, IPV6_ADDR_STATE_TENTATIVE);

   //Use the DNS servers provided by the router?
   if(!context->manualDnsConfig)
   {
      //Search for the Recursive DNS Server (RDNSS) option
      rdnssOption = ndpGetOption(message->options, length, NDP_OPT_RECURSIVE_DNS_SERVER);

      //RDNSS option found?
      if(rdnssOption != NULL && rdnssOption->length >= 1)
      {
         //Retrieve the number of addresses
         n = (rdnssOption->length - 1) / 2;

         //Save DNS servers
         for(i = 0; i < n; i++)
            ipv6SetDnsServer(context->interface, i, &rdnssOption->address[i]);
      }
   }

   //Set time stamp
   context->timestamp = osGetSystemTime();
   //Reset timeout value
   context->timeout = 0;
   //Reset retransmission counter
   context->retransmitCount = 0;

   //Verify the uniqueness of the global address
   context->state = SLAAC_STATE_GLOBAL_ADDR_DAD;
}
コード例 #6
0
ファイル: main.c プロジェクト: nandojve/embedded
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //Initialize kernel
   osInitKernel();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("*** CycloneTCP FTP Server Demo ***\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: STM32F407\r\n");
   TRACE_INFO("\r\n");

   //LED configuration
   STM_EVAL_LEDInit(LED1);
   STM_EVAL_LEDInit(LED2);
   STM_EVAL_LEDInit(LED3);
   STM_EVAL_LEDInit(LED4);

   //Clear LEDs
   STM_EVAL_LEDOff(LED1);
   STM_EVAL_LEDOff(LED2);
   STM_EVAL_LEDOff(LED3);
   STM_EVAL_LEDOff(LED4);

   //Initialize I/O expander
   IOE_Config();
   //Initialize user button
   STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);

   //Initialize LCD display
   STM324xG_LCD_Init();
   LCD_SetBackColor(Blue);
   LCD_SetTextColor(White);
   LCD_SetFont(&Font16x24);
   LCD_Clear(Blue);

   //Welcome message
   lcdSetCursor(0, 0);
   printf("FTP Server Demo");

   //File system initialization
   error = fsInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize file system!\r\n");
   }

   //TCP/IP stack initialization
   error = tcpIpStackInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   tcpIpStackSetInterfaceName(interface, "eth0");
   //Set host name
   tcpIpStackSetHostname(interface, "FTPServerDemo");
   //Select the relevant network adapter
   tcpIpStackSetDriver(interface, &stm32f4x7EthDriver);
   tcpIpStackSetPhyDriver(interface, &dp83848PhyDriver);
   //Set external interrupt line driver
   tcpIpStackSetExtIntDriver(interface, &extIntDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   tcpIpStackSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = tcpIpStackConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Get default settings
   ftpServerGetDefaultSettings(&ftpServerSettings);
   //Bind FTP server to the desired interface
   ftpServerSettings.interface = &netInterface[0];
   //Listen to port 21
   ftpServerSettings.port = FTP_PORT;
   //Root directory
   strcpy(ftpServerSettings.rootDir, "/");
   //User verification callback function
   ftpServerSettings.checkUserCallback = ftpServerCheckUserCallback;
   //Password verification callback function
   ftpServerSettings.checkPasswordCallback = ftpServerCheckPasswordCallback;
   //Callback used to retrieve file permissions
   ftpServerSettings.getFilePermCallback = ftpServerGetFilePermCallback;

   //FTP server initialization
   error = ftpServerInit(&ftpServerContext, &ftpServerSettings);
   //Failed to initialize FTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize FTP server!\r\n");
   }

   //Start FTP server
   error = ftpServerStart(&ftpServerContext);
   //Failed to start FTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start FTP server!\r\n");
   }

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Create a task to blink the LED
   task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #7
0
ファイル: main.c プロジェクト: frankzzcn/M2_SE_RTOS_Project
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //System initialization
   systemInit();

   //Initialize kernel
   osInitKernel();

   //Configure I/Os
   ioInit();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: STR912\r\n");
   TRACE_INFO("\r\n");

   //Initialize LCD display
   lcdInit();
   //Turn on backlight
   lcdSetBacklight(TRUE);
   //Set foreground and background colors
   lcdSetForegroundColor(WHITE);
   lcdSetBackgroundColor(BLUE);
   //Clear display
   lcdClear();

   //Welcome message
   lcdSetCursor(0, 0);
   printf("Web Server Demo\r\n");

   //TCP/IP stack initialization
   error = netInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   netSetInterfaceName(interface, "eth0");
   //Set host name
   netSetHostname(interface, "WebServerDemo");
   //Select the relevant network adapter
   netSetDriver(interface, &str912EthDriver);
   netSetPhyDriver(interface, &ksz8721PhyDriver);
   //Set external interrupt line driver
   netSetExtIntDriver(interface, &extIntDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   netSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = netConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Get default settings
   httpServerGetDefaultSettings(&httpServerSettings);
   //Bind HTTP server to the desired interface
   httpServerSettings.interface = &netInterface[0];
   //Listen to port 80
   httpServerSettings.port = HTTP_PORT;
   //Client connections
   httpServerSettings.maxConnections = APP_HTTP_MAX_CONNECTIONS;
   httpServerSettings.connections = httpConnections;
   //Specify the server's root directory
   strcpy(httpServerSettings.rootDirectory, "/www/");
   //Set default home page
   strcpy(httpServerSettings.defaultDocument, "index.shtm");
   //Callback functions
   httpServerSettings.cgiCallback = httpServerCgiCallback;
   httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;

   //HTTP server initialization
   error = httpServerInit(&httpServerContext, &httpServerSettings);
   //Failed to initialize HTTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize HTTP server!\r\n");
   }

   //Start HTTP server
   error = httpServerStart(&httpServerContext);
   //Failed to start HTTP server?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start HTTP server!\r\n");
   }

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #8
0
ファイル: main.c プロジェクト: frankzzcn/M2_SE_RTOS_Project
int_t main(void)
{
   error_t error;
   NetInterface *interface;
   OsTask *task;
   MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
   Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
   Ipv6Addr ipv6Addr;
#endif

   //Initialize kernel
   osInitKernel();
   //Configure debug UART
   debugInit(115200);

   //Start-up message
   TRACE_INFO("\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
   TRACE_INFO("**********************************\r\n");
   TRACE_INFO("Copyright: 2010-2015 Oryx Embedded SARL\r\n");
   TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
   TRACE_INFO("Target: RX63N\r\n");
   TRACE_INFO("\r\n");

   //Configure I/Os
   ioInit();

   //Initialize RSPI channel
   R_RSPI_Init(RSPI_CHANNEL_0);
   //Initialize LCD display
   GlyphOpen(&lcdHandle, 0);
   GlyphNormalScreen(lcdHandle);
   GlyphSetFont(lcdHandle, GLYPH_FONT_6_BY_13);
   //Clear display
   GlyphClearScreen(lcdHandle);

   //Welcome message
   lcdSetCursor(0, 0);
   printf("FTP Client\r\nDemo\r\n");

   //TCP/IP stack initialization
   error = netInit();
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
   }

   //Configure the first Ethernet interface
   interface = &netInterface[0];

   //Set interface name
   netSetInterfaceName(interface, "eth0");
   //Set host name
   netSetHostname(interface, "FTPClientDemo");
   //Select the relevant network adapter
   netSetDriver(interface, &rx63nEthDriver);
   netSetPhyDriver(interface, &dp83620PhyDriver);
   //Set external interrupt line driver
   netSetExtIntDriver(interface, &extIntDriver);
   //Set host MAC address
   macStringToAddr(APP_MAC_ADDR, &macAddr);
   netSetMacAddr(interface, &macAddr);

   //Initialize network interface
   error = netConfigInterface(interface);
   //Any error to report?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
   }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
   //Get default settings
   dhcpClientGetDefaultSettings(&dhcpClientSettings);
   //Set the network interface to be configured by DHCP
   dhcpClientSettings.interface = interface;
   //Disable rapid commit option
   dhcpClientSettings.rapidCommit = FALSE;

   //DHCP client initialization
   error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
   //Failed to initialize DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize DHCP client!\r\n");
   }

   //Start DHCP client
   error = dhcpClientStart(&dhcpClientContext);
   //Failed to start DHCP client?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start DHCP client!\r\n");
   }
#else
   //Set IPv4 host address
   ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
   ipv4SetHostAddr(interface, ipv4Addr);

   //Set subnet mask
   ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
   ipv4SetSubnetMask(interface, ipv4Addr);

   //Set default gateway
   ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
   ipv4SetDefaultGateway(interface, ipv4Addr);

   //Set primary and secondary DNS servers
   ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 0, ipv4Addr);
   ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
   ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
   //Get default settings
   slaacGetDefaultSettings(&slaacSettings);
   //Set the network interface to be configured
   slaacSettings.interface = interface;

   //SLAAC initialization
   error = slaacInit(&slaacContext, &slaacSettings);
   //Failed to initialize SLAAC?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to initialize SLAAC!\r\n");
   }

   //Start IPv6 address autoconfiguration process
   error = slaacStart(&slaacContext);
   //Failed to start SLAAC process?
   if(error)
   {
      //Debug message
      TRACE_ERROR("Failed to start SLAAC!\r\n");
   }
#else
   //Set link-local address
   ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
   ipv6SetLinkLocalAddr(interface, &ipv6Addr);

   //Set IPv6 prefix
   ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
   ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

   //Set global address
   ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
   ipv6SetGlobalAddr(interface, &ipv6Addr);

   //Set router
   ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
   ipv6SetRouter(interface, &ipv6Addr);

   //Set primary and secondary DNS servers
   ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 0, &ipv6Addr);
   ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
   ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

   //Create user task
   task = osCreateTask("User Task", userTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Create a task to blink the LED
   task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
   //Failed to create the task?
   if(task == OS_INVALID_HANDLE)
   {
      //Debug message
      TRACE_ERROR("Failed to create task!\r\n");
   }

   //Enable interrupts
   __enable_interrupt();

   //Start the execution of tasks
   osStartKernel();

   //This function should never return
   return 0;
}
コード例 #9
0
ファイル: main_ori.c プロジェクト: nandojve/embedded
int_t main(void)
{
    error_t error;
    NetInterface *interface;
    OsTask *task;
    MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
    Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
    Ipv6Addr ipv6Addr;
#endif

    //Update system core clock
    sysclk_init();
    board_init();

    // Initialize interrupt vector table support.
    irq_initialize_vectors();

    // Enable interrupts
    cpu_irq_enable();

    /* Call a local utility routine to initialize C-Library Standard I/O over
     * a USB CDC protocol. Tunable parameters in a conf_usb.h file must be
     * supplied to configure the USB device correctly.
     */
    stdio_usb_init();

    //Initialize kernel
    osInitKernel();
    //Configure debug UART

    //Start-up message
    TRACE_INFO("\r\n");
    TRACE_INFO("**********************************\r\n");
    TRACE_INFO("*** CycloneTCP Web Server Demo ***\r\n");
    TRACE_INFO("**********************************\r\n");
    TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
    TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
    TRACE_INFO("Target: SAM4E\r\n");
    TRACE_INFO("\r\n");

    //TCP/IP stack initialization
    error = tcpIpStackInit();
    //Any error to report?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
    }

    //Configure the first Ethernet interface
    interface = &netInterface[0];

    //Set interface name
    tcpIpStackSetInterfaceName(interface, "eth0");
    //Set host name
    tcpIpStackSetHostname(interface, "WebServerDemo");
    //Select the relevant network adapter
    tcpIpStackSetDriver(interface, &sam4eEthDriver);
    tcpIpStackSetPhyDriver(interface, &ksz8081PhyDriver);
    //Set external interrupt line driver
    tcpIpStackSetExtIntDriver(interface, &extIntDriver);
    //Set host MAC address
    macStringToAddr(APP_MAC_ADDR, &macAddr);
    tcpIpStackSetMacAddr(interface, &macAddr);

    //Initialize network interface
    error = tcpIpStackConfigInterface(interface);
    //Any error to report?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
    }

#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
    //Get default settings
    dhcpClientGetDefaultSettings(&dhcpClientSettings);
    //Set the network interface to be configured by DHCP
    dhcpClientSettings.interface = interface;
    //Disable rapid commit option
    dhcpClientSettings.rapidCommit = FALSE;

    //DHCP client initialization
    error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
    //Failed to initialize DHCP client?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize DHCP client!\r\n");
    }

    //Start DHCP client
    error = dhcpClientStart(&dhcpClientContext);
    //Failed to start DHCP client?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start DHCP client!\r\n");
    }
#else
    //Set IPv4 host address
    ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
    ipv4SetHostAddr(interface, ipv4Addr);

    //Set subnet mask
    ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
    ipv4SetSubnetMask(interface, ipv4Addr);

    //Set default gateway
    ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
    ipv4SetDefaultGateway(interface, ipv4Addr);

    //Set primary and secondary DNS servers
    ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
    ipv4SetDnsServer(interface, 0, ipv4Addr);
    ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
    ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif

#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
    //Get default settings
    slaacGetDefaultSettings(&slaacSettings);
    //Set the network interface to be configured
    slaacSettings.interface = interface;

    //SLAAC initialization
    error = slaacInit(&slaacContext, &slaacSettings);
    //Failed to initialize SLAAC?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize SLAAC!\r\n");
    }

    //Start IPv6 address autoconfiguration process
    error = slaacStart(&slaacContext);
    //Failed to start SLAAC process?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start SLAAC!\r\n");
    }
#else
    //Set link-local address
    ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
    ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

    //Set IPv6 prefix
    ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
    ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);

    //Set global address
    ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
    ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);

    //Set router
    ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
    ipv6SetRouter(interface, &ipv6Addr);

    //Set primary and secondary DNS servers
    ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
    ipv6SetDnsServer(interface, 0, &ipv6Addr);
    ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
    ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif

    //Get default settings
    httpServerGetDefaultSettings(&httpServerSettings);
    //Bind HTTP server to the desired interface
    httpServerSettings.interface = &netInterface[0];
    //Listen to port 80
    httpServerSettings.port = HTTP_PORT;
    //Specify the server's root directory
    strcpy(httpServerSettings.rootDirectory, "/www/");
    //Set default home page
    strcpy(httpServerSettings.defaultDocument, "index.shtm");
    //Callback functions
    httpServerSettings.authCallback = httpServerAuthCallback;
    httpServerSettings.cgiCallback = httpServerCgiCallback;
    httpServerSettings.uriNotFoundCallback = httpServerUriNotFoundCallback;

    //HTTP server initialization
    error = httpServerInit(&httpServerContext, &httpServerSettings);
    //Failed to initialize HTTP server?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to initialize HTTP server!\r\n");
    }

    //Start HTTP server
    error = httpServerStart(&httpServerContext);
    //Failed to start HTTP server?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start HTTP server!\r\n");
    }

    //Start TCP echo service
    error = tcpEchoStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start TCP echo service!\r\n");
    }

    //Start UDP echo service
    error = udpEchoStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start UDP echo service!\r\n");
    }

    //Start TCP discard service
    error = tcpDiscardStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start TCP discard service!\r\n");
    }

    //Start UDP discard service
    error = udpDiscardStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start UDP discard service!\r\n");
    }

    //Start TCP chargen service
    error = tcpChargenStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start TCP chargen service!\r\n");
    }

    //Start UDP chargen service
    error = udpChargenStart();
    //Failed to TCP echo service?
    if(error)
    {
        //Debug message
        TRACE_ERROR("Failed to start UDP chargen service!\r\n");
    }

    //Create user task
    task = osCreateTask("User Task", userTask, NULL, 500, 1);
    //Failed to create the task?
    if(task == OS_INVALID_HANDLE)
    {
        //Debug message
        TRACE_ERROR("Failed to create task!\r\n");
    }

    //Create a task to blink the LED
    task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
    //Failed to create the task?
    if(task == OS_INVALID_HANDLE)
    {
        //Debug message
        TRACE_ERROR("Failed to create task!\r\n");
    }

    //Start the execution of tasks
    osStartKernel();

    //This function should never return
    return 0;
}