int T0300_readonly(const char *initiator, const char *url)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
struct scsi_mode_sense *ms;
int ret, lun;
unsigned char data[4096];
struct unmap_list list[1];
int full_size;
ret = -1;
printf("0300_readonly:\n");
printf("==============\n");
if (show_info) {
printf("Test that all commands that modify the medium fail for readonly devices\n");
printf("1, WRITE10 at LUN 0 should fail.\n");
printf("2, WRITE12 at LUN 0 should fail.\n");
printf("3, WRITE16 at LUN 0 should fail.\n");
printf("4, WRITESAME10 at LUN 0 should fail.\n");
printf("5, WRITESAME16 at LUN 0 should fail.\n");
printf("6, WRITESAME10 with UNMAP at LUN 0 should fail (skipped if not thin-provisioned).\n");
printf("7, WRITESAME16 with UNMAP at LUN 0 should fail (skipped if not thin-provisioned).\n");
printf("8, UNMAP at LUN 0 should fail (skipped if not thin-provisioned).\n");
printf("9, WRITEVERIFY10 at LUN 0 should fail.\n");
printf("10, WRITEVERIFY12 at LUN 0 should fail.\n");
printf("11, WRITEVERIFY16 at LUN 0 should fail.\n");
printf("12, COMPAREANDWRITE at LUN 0 should fail.\n");
printf("13, ORWRITE at LUN 0 should fail.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
/* This test is only valid for SBC devices */
if (device_type != SCSI_INQUIRY_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS) {
printf("LUN is not SBC device. Skipping test\n");
return -2;
}
/* verify the device is readonly */
task = iscsi_modesense6_sync(iscsi, lun, 0, SCSI_MODESENSE_PC_CURRENT,
SCSI_MODESENSE_PAGECODE_RETURN_ALL_PAGES, 0,
4);
if (task == NULL) {
printf("Failed to send modesense6 command: %s\n", iscsi_get_error(iscsi));
goto finished;
}
full_size = scsi_datain_getfullsize(task);
if (full_size > task->datain.size) {
scsi_free_scsi_task(task);
task = iscsi_modesense6_sync(iscsi, lun, 0, SCSI_MODESENSE_PC_CURRENT,
SCSI_MODESENSE_PAGECODE_RETURN_ALL_PAGES, 0,
full_size);
if (task == NULL) {
printf("Failed to send modesense6 command: %s\n", iscsi_get_error(iscsi));
goto finished;
}
}
ms = scsi_datain_unmarshall(task);
if (ms == NULL) {
printf("failed to unmarshall mode sense datain blob\n");
scsi_free_scsi_task(task);
goto finished;
}
if (!(ms->device_specific_parameter & 0x80)) {
printf("Device is not read-only. Skipping test\n");
ret = -2;
goto finished;
}
scsi_free_scsi_task(task);
ret = 0;
/* Write one block at lba 0 */
printf("WRITE10 to LUN 0 ... ");
task = iscsi_write10_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITE10 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITE10 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITE10 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITE12 to LUN 0 ... ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITE12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITE12 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITE12 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITE16 to LUN 0 ... ");
task = iscsi_write16_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITE16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITE16 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITE16 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITESAME10 to LUN 0 ... ");
task = iscsi_writesame10_sync(iscsi, lun, data, block_size, 0, 1, 0, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITESAME10 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITESAME10 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITESAME10 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITESAME16 to LUN 0 ... ");
task = iscsi_writesame16_sync(iscsi, lun, data, block_size, 0, 1, 0, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITESAME16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITESAME16 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITESAME16 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* UNMAP one block at lba 0 */
printf("WRITESAME10 to UNMAP LUN 0 ... ");
if (lbpme == 0) {
printf("LUN is not thin-provisioned. [SKIPPED]\n");
goto finished;
}
task = iscsi_writesame10_sync(iscsi, lun, data, block_size, 0, 1, 0, 1, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITESAME10 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITESAME10 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITESAME10 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* UNMAP one block at lba 0 */
printf("WRITESAME16 to UNMAP LUN 0 ... ");
if (lbpme == 0) {
printf("LUN is not thin-provisioned. [SKIPPED]\n");
goto finished;
}
task = iscsi_writesame16_sync(iscsi, lun, data, block_size, 0, 1, 0, 1, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITESAME16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITESAME16 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITESAME16 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* UNMAP one block at lba 0 */
printf("UNMAP LUN 0 ... ");
if (lbpme == 0) {
printf("LUN is not thin-provisioned. [SKIPPED]\n");
goto finished;
}
list[0].lba = 0;
list[0].num = 1;
task = iscsi_unmap_sync(iscsi, lun, 0, 0, &list[0], 1);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send UNMAP command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("UNMAP command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("UNMAP failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITEVERIFY10 to LUN 0 ... ");
task = iscsi_writeverify10_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITEVERIFY10 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITEVERIFY10 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITEVERIFY10 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITEVERIFY12 to LUN 0 ... ");
task = iscsi_writeverify12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITEVERIFY12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITEVERIFY12 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITEVERIFY12 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("WRITEVERIFY16 to LUN 0 ... ");
task = iscsi_writeverify16_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send WRITEVERIFY16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("WRITEVERIFY16 command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("WRITEVERIFY16 failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("COMPAREWRITE to LUN 0 ... ");
task = iscsi_compareandwrite_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send COMPAREANDWRITE command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("COMPAREANDWRITE command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("COMPAREANDWRITE failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
/* Write one block at lba 0 */
printf("ORWRITE to LUN 0 ... ");
task = iscsi_orwrite_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send ORWRITE command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("ORWRITE command should fail when writing to readonly devices\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_DATA_PROTECTION
|| task->sense.ascq != SCSI_SENSE_ASCQ_WRITE_PROTECTED) {
printf("[FAILED]\n");
printf("ORWRITE failed with the wrong sense code. Should fail with DATA_PROTECTION/WRITE_PROTECTED\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0234_write12_beyondeol(const char *initiator, const char *url)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
int ret, i, lun;
unsigned char data[4096 * 258];
printf("0234_write12_beyond_eol:\n");
printf("=======================\n");
if (show_info) {
printf("Test that WRITE12 fails if writing beyond end-of-lun.\n");
printf("This test is skipped for LUNs with more than 2^31 blocks\n");
printf("1, Writing 1-256 blocks beyond end-of-lun should fail.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
ret = 0;
if (num_blocks >= 0x80000000) {
printf("[SKIPPED]\n");
printf("LUN is too big for read-beyond-eol tests with WRITE12. Skipping test.\n");
ret = -2;
goto finished;
}
/* read 1 - 256 blocks beyond the end of the device */
printf("Writing 1-256 blocks beyond end-of-device ... ");
for (i = 2; i <= 257; i++) {
task = iscsi_write12_sync(iscsi, lun, num_blocks, data, i * block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command should fail when writing beyond end of device\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0231_write12_wrprotect(const char *initiator, const char *url, int data_loss, int show_info)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
struct scsi_readcapacity16 *rc16;
int ret = 0, i, lun;
uint32_t block_size;
unsigned char data[4096];
printf("0231_write12_wrprotect:\n");
printf("======================\n");
if (show_info) {
printf("Test how WRITE12 handles the wrprotect bits\n");
printf("1, Any non-zero valued for wrprotect should fail.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
/* find the size of the LUN */
task = iscsi_readcapacity16_sync(iscsi, lun);
if (task == NULL) {
printf("Failed to send READCAPACITY16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("READCAPACITY16 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
printf("failed to unmarshall READCAPACITY16 data. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
block_size = rc16->block_length;
if(rc16->prot_en != 0) {
printf("device is formatted with protection information, skipping test\n");
scsi_free_scsi_task(task);
ret = -2;
goto finished;
}
scsi_free_scsi_task(task);
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
printf("Write12 with RDPROTECT ");
for (i = 1; i <= 7; i++) {
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, i, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_CHECK_CONDITION
|| task->sense.key != SCSI_SENSE_ILLEGAL_REQUEST
|| task->sense.ascq != SCSI_SENSE_ASCQ_INVALID_FIELD_IN_CDB) {
printf("[FAILED]\n");
printf("Write12 with RDPROTECT!=0 should have failed with CHECK_CONDITION/ILLEGAL_REQUEST/INVALID_FIELD_IN_CDB\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0233_write12_0blocks(const char *initiator, const char *url, int data_loss, int show_info)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
struct scsi_readcapacity16 *rc16;
int ret = 0, lun;
uint32_t block_size;
uint64_t num_blocks;
printf("0233_write12_0blocks:\n");
printf("====================\n");
if (show_info) {
printf("Test that WRITE12 works correctly when writing 0 number of blocks.\n");
printf("1, Read at LBA:0 should work.\n");
printf("2, Read at LBA:end-of-lun should work.\n");
printf("3, Read at LBA:end-of-lun+1 should fail.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
/* find the size of the LUN */
task = iscsi_readcapacity16_sync(iscsi, lun);
if (task == NULL) {
printf("Failed to send READCAPACITY16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("READCAPACITY16 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
printf("failed to unmarshall READCAPACITY16 data. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
block_size = rc16->block_length;
num_blocks = rc16->returned_lba;
scsi_free_scsi_task(task);
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -1;
goto finished;
}
printf("Write12 0blocks at LBA:0 ");
task = iscsi_write12_sync(iscsi, lun, 0, NULL, 0, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 0blocks at LBA:<end-of-disk> ");
task = iscsi_write12_sync(iscsi, lun, num_blocks, NULL, 0, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 0blocks at LBA:<beyond end-of-disk> ");
task = iscsi_write12_sync(iscsi, lun, num_blocks + 1, NULL, 0, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status == SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: Should fail when writing 0blocks beyond end\n");
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0230_write12_simple(const char *initiator, const char *url, int data_loss, int show_info)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
struct scsi_readcapacity16 *rc16;
int ret, i, lun;
uint32_t block_size;
uint64_t num_blocks;
unsigned char data[4096 * 256];
printf("0230_write12_simple:\n");
printf("===================\n");
if (show_info) {
printf("Test basic WRITE12 functionality.\n");
printf("1, Verify we can write the first 1-256 blocks of the LUN.\n");
printf("2, Verify we can write the last 1-256 blocks of the LUN.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
/* find the size of the LUN */
task = iscsi_readcapacity16_sync(iscsi, lun);
if (task == NULL) {
printf("Failed to send READCAPACITY16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("READCAPACITY16 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
printf("failed to unmarshall READCAPACITY16 data. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
block_size = rc16->block_length;
num_blocks = rc16->returned_lba;
scsi_free_scsi_task(task);
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
ret = 0;
/* write the first 1 - 256 blocks at the start of the LUN */
printf("Writing first 1-256 blocks ... ");
for (i = 1; i <= 256; i++) {
task = iscsi_write12_sync(iscsi, lun, 0, data, i * block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
}
printf("[OK]\n");
/* write the last 1 - 256 blocks at the end of the LUN */
printf("Writing last 1-256 blocks ... ");
for (i = 1; i <= 256; i++) {
task = iscsi_write12_sync(iscsi, lun, num_blocks +1 - i, data, i * block_size, block_size, 0, 0, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
scsi_free_scsi_task(task);
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0232_write12_flags(const char *initiator, const char *url)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
int ret = 0, lun;
unsigned char data[4096];
printf("0232_write12_flags:\n");
printf("===================\n");
if (show_info) {
printf("Test how WRITE12 handles the flags\n");
printf("1, Write with DPU should work.\n");
printf("2, Write with FUA should work.\n");
printf("3, Write with FUA_NV should work.\n");
printf("4, Write with FUA+FUA_NV should work.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
if (inq->device_type != SCSI_INQUIRY_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS) {
logging(LOG_VERBOSE, "[SKIPPED] Not SBC device."
" Skipping test");
return -2;
}
printf("Write12 with DPO ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 1, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
printf("Write12 with FUA ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 1, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 with FUA_NV ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 1, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 with FUA+FUA_NV ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 1, 1, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
int T0232_write12_flags(const char *initiator, const char *url, int data_loss, int show_info)
{
struct iscsi_context *iscsi;
struct scsi_task *task;
struct scsi_readcapacity16 *rc16;
struct scsi_inquiry_standard *inq;
int ret = 0, lun;
uint32_t block_size;
unsigned char data[4096];
printf("0232_write12_flags:\n");
printf("===================\n");
if (show_info) {
printf("Test how WRITE12 handles the flags\n");
printf("1, Write with DPU should work.\n");
printf("2, Write with FUA should work.\n");
printf("3, Write with FUA_NV should work.\n");
printf("4, Write with FUA+FUA_NV should work.\n");
printf("\n");
return 0;
}
iscsi = iscsi_context_login(initiator, url, &lun);
if (iscsi == NULL) {
printf("Failed to login to target\n");
return -1;
}
/* This test is only valid for SBC devices */
task = iscsi_inquiry_sync(iscsi, lun, 0, 0, 64);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
printf("Inquiry command failed : %s\n", iscsi_get_error(iscsi));
return -1;
}
inq = scsi_datain_unmarshall(task);
if (inq == NULL) {
printf("failed to unmarshall inquiry datain blob\n");
scsi_free_scsi_task(task);
return -1;
}
if (inq->device_type != SCSI_INQUIRY_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS) {
printf("LUN is not SBC device. Skipping test\n");
scsi_free_scsi_task(task);
return -2;
}
/* find the size of the LUN */
task = iscsi_readcapacity16_sync(iscsi, lun);
if (task == NULL) {
printf("Failed to send READCAPACITY16 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("READCAPACITY16 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
printf("failed to unmarshall READCAPACITY16 data. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
block_size = rc16->block_length;
scsi_free_scsi_task(task);
printf("Write12 with DPO ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 1, 0, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
if (!data_loss) {
printf("--dataloss flag is not set. Skipping test\n");
ret = -2;
goto finished;
}
printf("Write12 with FUA ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 1, 0, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 with FUA_NV ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 0, 1, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
printf("Write12 with FUA+FUA_NV ");
task = iscsi_write12_sync(iscsi, lun, 0, data, block_size, block_size, 0, 0, 1, 1, 0);
if (task == NULL) {
printf("[FAILED]\n");
printf("Failed to send write12 command: %s\n", iscsi_get_error(iscsi));
ret = -1;
goto finished;
}
if (task->status != SCSI_STATUS_GOOD) {
printf("[FAILED]\n");
printf("Write12 command: failed with sense. %s\n", iscsi_get_error(iscsi));
ret = -1;
scsi_free_scsi_task(task);
goto finished;
}
printf("[OK]\n");
finished:
iscsi_logout_sync(iscsi);
iscsi_destroy_context(iscsi);
return ret;
}
