/*---------------------------------------------------------------------------*
* allocate an io port
*---------------------------------------------------------------------------*/
static int
isic_alloc_port(device_t dev, int rid, u_int base, u_int len)
{
size_t unit = device_get_unit(dev);
struct l1_softc *sc = &l1_sc[unit];
sc->sc_resources.io_rid[rid] = rid;
bus_set_resource(dev, SYS_RES_IOPORT, rid, base, len);
if(!(sc->sc_resources.io_base[rid] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[rid],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Error, failed to reserve io #%d!\n", unit, rid);
isic_detach_common(dev);
return(ENXIO);
}
return(0);
}
/*---------------------------------------------------------------------------*
* attach for ISA PnP cards
*---------------------------------------------------------------------------*/
static int
isic_pnp_attach(device_t dev)
{
u_int32_t vend_id = isa_get_vendorid(dev); /* vendor id */
unsigned int unit = device_get_unit(dev); /* get unit */
const char *name = device_get_desc(dev); /* get description */
struct l1_softc *sc = 0; /* softc */
void *ih = 0; /* a dummy */
int ret;
/* see if we are out of bounds */
if(unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for %s\n", unit, unit, name);
return ENXIO;
}
/* get information structure for this unit */
sc = &l1_sc[unit];
/* get io_base */
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0UL, ~0UL, 1, RF_ACTIVE ) ))
{
printf("isic_pnp_attach: Couldn't get my io_base.\n");
return ENXIO;
}
/* will not be used for pnp devices */
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
/* get irq, release io_base if we don't get it */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0UL, ~0UL, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get irq.\n",unit);
isic_detach_common(dev);
return ENXIO;
}
/* not needed */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
/* set flag so we know what this card is */
ret = ENXIO;
switch(vend_id)
{
#if defined(TEL_S0_16_3_P) || defined(CRTX_S0_P) || defined(COMPAQ_M610)
case VID_TEL163PNP:
sc->sc_cardtyp = CARD_TYPEP_163P;
ret = isic_attach_Cs0P(dev);
break;
case VID_CREATIXPP:
sc->sc_cardtyp = CARD_TYPEP_CS0P;
ret = isic_attach_Cs0P(dev);
break;
case VID_COMPAQ_M610:
sc->sc_cardtyp = CARD_TYPEP_COMPAQ_M610;
ret = isic_attach_Cs0P(dev);
break;
#endif
#ifdef DYNALINK
case VID_DYNALINK:
sc->sc_cardtyp = CARD_TYPEP_DYNALINK;
ret = isic_attach_Dyn(dev);
break;
#endif
#ifdef SEDLBAUER
case VID_SEDLBAUER:
sc->sc_cardtyp = CARD_TYPEP_SWS;
ret = isic_attach_sws(dev);
break;
#endif
#ifdef DRN_NGO
case VID_NICCYGO:
sc->sc_cardtyp = CARD_TYPEP_DRNNGO;
ret = isic_attach_drnngo(dev);
break;
#endif
#ifdef ELSA_QS1ISA
case VID_ELSAQS1P:
sc->sc_cardtyp = CARD_TYPEP_ELSAQS1ISA;
ret = isic_attach_Eqs1pi(dev);
break;
#endif
#ifdef ITKIX1
case VID_ITK0025:
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
ret = isic_attach_itkix1(dev);
break;
#endif
#ifdef SIEMENS_ISURF2
case VID_SIESURF2:
sc->sc_cardtyp = CARD_TYPEP_SIE_ISURF2;
ret = isic_attach_siemens_isurf(dev);
break;
#endif
#ifdef ASUSCOM_IPAC
case VID_ASUSCOM_IPAC:
sc->sc_cardtyp = CARD_TYPEP_ASUSCOMIPAC;
ret = isic_attach_asi(dev);
break;
#endif
#ifdef EICON_DIVA
case VID_EICON_DIVA_20:
sc->sc_cardtyp = CARD_TYPEP_DIVA_ISA;
ret = isic_attach_diva(dev);
break;
case VID_EICON_DIVA_202:
sc->sc_cardtyp = CARD_TYPEP_DIVA_ISA;
ret = isic_attach_diva_ipac(dev);
break;
#endif
default:
printf("isic%d: Error, no driver for %s\n", unit, name);
ret = ENXIO;
break;
}
if(ret)
{
isic_detach_common(dev);
return ENXIO;
}
if(isic_attach_common(dev))
{
/* unset flag */
sc->sc_cardtyp = CARD_TYPEP_UNK;
/* free irq here, it hasn't been attached yet */
bus_release_resource(dev,SYS_RES_IRQ,sc->sc_resources.irq_rid,
sc->sc_resources.irq);
sc->sc_resources.irq = 0;
isic_detach_common(dev);
return ENXIO;
}
else
{
/* setup intr routine */
bus_setup_intr(dev,sc->sc_resources.irq,INTR_TYPE_NET,
(void(*)(void*))isicintr,
sc,&ih);
return 0;
}
}
/*---------------------------------------------------------------------------*
* isic_probe_usrtai - probe for USR
*---------------------------------------------------------------------------*/
int
isic_probe_usrtai(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* pointer to softc */
void *ih = 0; /* dummy */
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
kprintf("isic%d: Error, unit %d >= ISIC_MAXUNIT for USR Sportster TA!\n",
unit, unit);
return(ENXIO);
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
/* see if an io base was supplied */
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Could not get iobase for USR Sportster TA!\n",
unit);
return(ENXIO);
}
/* set io base */
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
/* release io base */
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
/* check if we got an iobase */
switch(sc->sc_port)
{
case 0x200:
case 0x208:
case 0x210:
case 0x218:
case 0x220:
case 0x228:
case 0x230:
case 0x238:
case 0x240:
case 0x248:
case 0x250:
case 0x258:
case 0x260:
case 0x268:
case 0x270:
case 0x278:
break;
default:
kprintf("isic%d: Error, invalid iobase 0x%x specified for USR Sportster TA!\n",
unit, sc->sc_port);
return(0);
break;
}
/* allocate all the ports needed */
if(usrtai_alloc_port(dev))
{
kprintf("isic%d: Could not get the ports for USR Sportster TA!\n", unit);
isic_detach_common(dev);
return(ENXIO);
}
/* get our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Could not get an irq for USR Sportster TA!\n",unit);
isic_detach_common(dev);
return ENXIO;
}
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
/* register interrupt routine */
bus_setup_intr(dev, sc->sc_resources.irq, 0,
(void(*)(void *))(isicintr), sc, &ih, NULL);
/* check IRQ validity */
if(intr_no[sc->sc_irq] == 0)
{
kprintf("isic%d: Error, invalid IRQ [%d] specified for USR Sportster TA!\n",
unit, sc->sc_irq);
return(1);
}
/* setup ISAC access routines */
sc->clearirq = NULL;
sc->readreg = usrtai_read_reg;
sc->writereg = usrtai_write_reg;
sc->readfifo = usrtai_read_fifo;
sc->writefifo = usrtai_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_USRTA;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* setup ISAC and HSCX base addr */
ISAC_BASE = (caddr_t)sc->sc_port + USR_ISAC_OFF;
HSCX_A_BASE = (caddr_t)sc->sc_port + USR_HSCXA_OFF;
HSCX_B_BASE = (caddr_t)sc->sc_port + USR_HSCXB_OFF;
/*
* Read HSCX A/B VSTR. Expected value for USR Sportster TA based
* boards is 0x05 in the least significant bits.
*/
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) ||
((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
{
kprintf("isic%d: HSCX VSTR test failed for USR Sportster TA\n",
unit);
kprintf("isic%d: HSC0: VSTR: %#x\n",
unit, HSCX_READ(0, H_VSTR));
kprintf("isic%d: HSC1: VSTR: %#x\n",
unit, HSCX_READ(1, H_VSTR));
return (1);
}
return (0);
}
/*---------------------------------------------------------------------------*
* allocate an io port - based on code in isa_isic.c
*---------------------------------------------------------------------------*/
static int
usrtai_alloc_port(device_t dev)
{
size_t unit = device_get_unit(dev);
struct l1_softc *sc = &l1_sc[unit];
int i, num = 0;
bus_size_t base;
/* 49 io mappings: 1 config and 48x8 registers */
/* config at offset 0x8000 */
base = sc->sc_port + 0x8000;
if (base < 0 || base > 0x0ffff)
return 1;
sc->sc_resources.io_rid[num] = num;
bus_set_resource(dev, SYS_RES_IOPORT, num, base, 1);
if(!(sc->sc_resources.io_base[num] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[num],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Error, failed to reserve io #%dport %#x!\n", unit, num, base);
isic_detach_common(dev);
return(ENXIO);
}
num++;
/* HSCX A at offset 0 */
base = sc->sc_port;
for (i = 0; i < 16; i++) {
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
return 1;
sc->sc_resources.io_rid[num] = num;
bus_set_resource(dev, SYS_RES_IOPORT, num, base+i*1024, 8);
if(!(sc->sc_resources.io_base[num] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[num],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Error, failed to reserve io #%d port %#x!\n", unit, num, base+i*1024);
isic_detach_common(dev);
return(ENXIO);
}
++num;
}
/* HSCX B at offset 0x4000 */
base = sc->sc_port + 0x4000;
for (i = 0; i < 16; i++) {
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
return 1;
sc->sc_resources.io_rid[num] = num;
bus_set_resource(dev, SYS_RES_IOPORT, num, base+i*1024, 8);
if(!(sc->sc_resources.io_base[num] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[num],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Error, failed to reserve io #%d port %#x!\n", unit, num, base+i*1024);
isic_detach_common(dev);
return(ENXIO);
}
++num;
}
/* ISAC at offset 0xc000 */
base = sc->sc_port + 0xc000;
for (i = 0; i < 16; i++) {
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
return 1;
sc->sc_resources.io_rid[num] = num;
bus_set_resource(dev, SYS_RES_IOPORT, num, base+i*1024, 8);
if(!(sc->sc_resources.io_base[num] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[num],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Error, failed to reserve io #%d port %#x!\n", unit, num, base+i*1024);
isic_detach_common(dev);
return(ENXIO);
}
++num;
}
return(0);
}
/*---------------------------------------------------------------------------*
* isic_probe_avma1 - probe for AVM A1 and compatibles
*---------------------------------------------------------------------------*/
int
isic_probe_avma1(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* pointer to softc */
void *ih = 0; /* dummy */
bus_space_tag_t t; /* bus things */
bus_space_handle_t h;
u_char savebyte;
u_char byte;
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for AVM A1/Fritz!\n",
unit, unit);
return(ENXIO);
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
/* see if an io base was supplied */
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get iobase for AVM A1/Fritz!\n",
unit);
return(ENXIO);
}
/* set io base */
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
/* release io base */
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
switch(sc->sc_port)
{
case 0x200:
case 0x240:
case 0x300:
case 0x340:
break;
default:
printf("isic%d: Error, invalid iobase 0x%x specified for AVM A1/Fritz!\n",
unit, sc->sc_port);
return(ENXIO);
break;
}
if(isic_alloc_port(dev, 0, sc->sc_port+AVM_CONF_REG, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 1, sc->sc_port+AVM_ISAC_R_OFFS, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 2, sc->sc_port+AVM_HSCXA_R_OFFS, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 3, sc->sc_port+AVM_HSCXB_R_OFFS, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 4, sc->sc_port+AVM_ISAC_F_OFFS, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 5, sc->sc_port+AVM_HSCXA_F_OFFS, 0x20))
return(ENXIO);
if(isic_alloc_port(dev, 6, sc->sc_port+AVM_HSCXB_F_OFFS, 0x20))
return(ENXIO);
/* get our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get an irq for AVM A1/Fritz!\n",unit);
isic_detach_common(dev);
return ENXIO;
}
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
/* register interupt routine */
bus_setup_intr(dev, sc->sc_resources.irq, INTR_TYPE_NET,
(void(*)(void *))(isicintr),
sc, &ih);
/* check IRQ validity */
switch(sc->sc_irq)
{
case 3:
case 4:
case 5:
case 6:
case 7:
case 8:
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
break;
default:
printf("isic%d: Error, invalid IRQ [%d] specified for AVM A1/Fritz!\n",
unit, sc->sc_irq);
isic_detach_common(dev);
return(ENXIO);
break;
}
sc->clearirq = NULL;
sc->readreg = avma1_read_reg;
sc->writereg = avma1_write_reg;
sc->readfifo = avma1_read_fifo;
sc->writefifo = avma1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_AVMA1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/*
* Read HSCX A/B VSTR.
* Expected value for AVM A1 is 0x04 or 0x05 and for the
* AVM Fritz!Card is 0x05 in the least significant bits.
*/
if( (((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(0, H_VSTR) & 0xf) != 0x4)) ||
(((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(1, H_VSTR) & 0xf) != 0x4)) )
{
printf("isic%d: HSCX VSTR test failed for AVM A1/Fritz\n",
unit);
printf("isic%d: HSC0: VSTR: %#x\n",
unit, HSCX_READ(0, H_VSTR));
printf("isic%d: HSC1: VSTR: %#x\n",
unit, HSCX_READ(1, H_VSTR));
return(ENXIO);
}
/* AVM A1 or Fritz! control register bits: */
/* read write */
/* 0x01 hscx irq* RESET */
/* 0x02 isac irq* clear counter1 */
/* 0x04 counter irq* clear counter2 */
/* 0x08 always 0 irq enable */
/* 0x10 read test bit set test bit */
/* 0x20 always 0 unused */
/*
* XXX the following test may be destructive, to prevent the
* worst case, we save the byte first, and in case the test
* fails, we write back the saved byte .....
*/
t = rman_get_bustag(sc->sc_resources.io_base[0]);
h = rman_get_bushandle(sc->sc_resources.io_base[0]);
savebyte = bus_space_read_1(t, h, 0);
/* write low to test bit */
bus_space_write_1(t, h, 0, 0x00);
/* test bit and next higher and lower bit must be 0 */
if((byte = bus_space_read_1(t, h, 0) & 0x38) != 0x00)
{
printf("isic%d: Error, probe-1 failed, 0x%02x should be 0x00 for AVM A1/Fritz!\n",
unit, byte);
bus_space_write_1(t, h, 0, savebyte);
return(ENXIO);
}
/* write high to test bit */
bus_space_write_1(t, h, 0, 0x10);
/* test bit must be high, next higher and lower bit must be 0 */
if((byte = bus_space_read_1(t, h, 0) & 0x38) != 0x10)
{
printf("isic%d: Error, probe-2 failed, 0x%02x should be 0x10 for AVM A1/Fritz!\n",
unit, byte);
bus_space_write_1(t, h, 0, savebyte);
return(ENXIO);
}
return(0);
}
/*---------------------------------------------------------------------------*
* isic_attach_Cs0P - attach Creatix / Teles PnP
*---------------------------------------------------------------------------*/
int
isic_attach_Cs0P(device_t dev)
{
u_int32_t iobase1;
u_int32_t iobase2;
u_int32_t iocfg = 0; /* quiet bogus gcc warning */
int unit = device_get_unit(dev);
struct l1_softc *sc = &l1_sc[unit];
bus_space_tag_t t;
bus_space_handle_t h;
/*
* this card needs a second io_base,
* free resources if we don't get it
*/
sc->sc_resources.io_rid[1] = 1;
if(!(sc->sc_resources.io_base[1] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[1],
0UL, ~0UL, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 1 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/*
* Compaq M610 has a cfg io area,
* we need it
*/
if (sc->sc_cardtyp == CARD_TYPEP_COMPAQ_M610)
{
sc->sc_resources.io_rid[2] = 2;
if(!(sc->sc_resources.io_base[2] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[2],
0UL, ~0UL, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get cfg io area for Compaq Microcom 610\n", unit);
isic_detach_common(dev);
return ENXIO;
}
iocfg = rman_get_start(sc->sc_resources.io_base[2]);
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[2],
sc->sc_resources.io_base[2]);
}
/* remember the io base addresses */
if (sc->sc_cardtyp != CARD_TYPEP_COMPAQ_M610)
{
iobase1 = rman_get_start(sc->sc_resources.io_base[0]);
iobase2 = rman_get_start(sc->sc_resources.io_base[1]);
}
else
{
iobase1 = rman_get_start(sc->sc_resources.io_base[1]);
iobase2 = rman_get_start(sc->sc_resources.io_base[0]);
}
/*
* because overlapping resources are invalid,
* release the first and second io port resource
*/
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[1],
sc->sc_resources.io_base[1]);
/* set and allocate a base io address for the ISAC chip */
sc->sc_resources.io_rid[2] = 2;
bus_set_resource(dev, SYS_RES_IOPORT, 2, iobase1-0x20, 0x40);
if(!(sc->sc_resources.io_base[2] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[2],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 2 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* set and allocate a resource for the HSCX channel A */
sc->sc_resources.io_rid[3] = 3;
/*XXX*/ /* FIXME !!!!
* the width of the resource is too small, there are accesses
* to it with an offset of 0x3e into the next resource. anyway,
* it seems to work and i have no idea how to do 2 resources
* overlapping each other.
*/
#if 0
bus_set_resource(dev, SYS_RES_IOPORT, 3, iobase2-0x20, 0x20);
#else
bus_set_resource(dev, SYS_RES_IOPORT, 3, iobase2-0x20, 0x10);
#endif
if(!(sc->sc_resources.io_base[3] =
bus_alloc_resource(dev,SYS_RES_IOPORT,
&sc->sc_resources.io_rid[3],
0ul,~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 3 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* set and allocate a resources for the HSCX channel B */
sc->sc_resources.io_rid[4] = 4;
bus_set_resource(dev, SYS_RES_IOPORT, 4, iobase2, 0x40);
if(!(sc->sc_resources.io_base[4] =
bus_alloc_resource(dev,SYS_RES_IOPORT,
&sc->sc_resources.io_rid[4],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 4 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/*
* set and allocate a resource for the cfg io
* for compaq m610
*/
if (sc->sc_cardtyp == CARD_TYPEP_COMPAQ_M610)
{
sc->sc_resources.io_rid[5] = 5;
bus_set_resource(dev, SYS_RES_IOPORT, 5, iocfg, 0x01);
if(!(sc->sc_resources.io_base[5] =
bus_alloc_resource(dev,SYS_RES_IOPORT,
&sc->sc_resources.io_rid[5],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get cfg io area for Compaq Microcom 610!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
}
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = ctxs0P_read_reg;
sc->writereg = ctxs0P_write_reg;
sc->readfifo = ctxs0P_read_fifo;
sc->writefifo = ctxs0P_write_fifo;
/* setup card type */
if (sc->sc_cardtyp != CARD_TYPEP_COMPAQ_M610)
sc->sc_cardtyp = CARD_TYPEP_CS0P;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* enable the card */
if (sc->sc_cardtyp != CARD_TYPEP_COMPAQ_M610)
{
t = rman_get_bustag(sc->sc_resources.io_base[2]);
h = rman_get_bushandle(sc->sc_resources.io_base[2]);
bus_space_write_1(t, h, 0x3c, 0);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, 0x3c, 1);
DELAY(SEC_DELAY / 10);
}
else
{
t = rman_get_bustag(sc->sc_resources.io_base[5]);
h = rman_get_bushandle(sc->sc_resources.io_base[5]);
bus_space_write_1(t, h, 0xff, 0);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, 0x00, 1);
DELAY(SEC_DELAY / 10);
}
return 0;
}
/*---------------------------------------------------------------------------*
* isic_probe_s016 - probe for Teles S0/16 and compatibles
*---------------------------------------------------------------------------*/
int
isic_probe_s016(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* softc */
void *ih = 0; /* dummy */
u_int8_t b0,b1,b2; /* for signature */
bus_space_tag_t t; /* bus things */
bus_space_handle_t h;
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for Teles S0/16!\n",
unit, unit);
return(ENXIO);
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
/* see if an io base was supplied */
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not allocate i/o port for Teles S0/16.\n", unit);
return(ENXIO);
}
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
/*
* check if the provided io port is valid
*/
switch(sc->sc_port)
{
case 0xd80:
case 0xe80:
case 0xf80:
break;
default:
printf("isic%d: Error, invalid iobase 0x%x specified for Teles S0/16!\n",
unit, sc->sc_port);
isic_detach_common(dev);
return(ENXIO);
break;
}
/* allocate memory resource */
if(!(sc->sc_resources.mem =
bus_alloc_resource(dev, SYS_RES_MEMORY,
&sc->sc_resources.mem_rid,
0ul, ~0ul, TELES_S016_MEMSIZE,
RF_ACTIVE)))
{
printf("isic%d: Could not allocate memory for Teles S0/16.\n", unit);
isic_detach_common(dev);
return(ENXIO);
}
/*
* get virtual addr.
*/
sc->sc_vmem_addr = rman_get_virtual(sc->sc_resources.mem);
/*
* check for valid adresses
*/
switch(kvtop(sc->sc_vmem_addr))
{
case 0xc0000:
case 0xc2000:
case 0xc4000:
case 0xc6000:
case 0xc8000:
case 0xca000:
case 0xcc000:
case 0xce000:
case 0xd0000:
case 0xd2000:
case 0xd4000:
case 0xd6000:
case 0xd8000:
case 0xda000:
case 0xdc000:
case 0xde000:
break;
default:
printf("isic%d: Error, invalid memory address 0x%lx for Teles S0/16!\n",
unit, kvtop(sc->sc_vmem_addr));
isic_detach_common(dev);
return(ENXIO);
break;
}
/* setup ISAC access routines */
sc->clearirq = NULL;
sc->readreg = tels016_read_reg;
sc->writereg = tels016_write_reg;
sc->readfifo = tels016_read_fifo;
sc->writefifo = tels016_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_16;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM1;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* setup ISAC base addr, though we don't really need it */
ISAC_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x100);
/* setup HSCX base addr */
HSCX_A_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x180);
HSCX_B_BASE = (caddr_t)((sc->sc_vmem_addr) + 0x1c0);
t = rman_get_bustag(sc->sc_resources.io_base[0]);
h = rman_get_bushandle(sc->sc_resources.io_base[0]);
/* get signature bytes */
b0 = bus_space_read_1(t, h, 0);
b1 = bus_space_read_1(t, h, 1);
b2 = bus_space_read_1(t, h, 2);
/* check signature bytes */
if(b0 != 0x51)
{
printf("isic%d: Error, signature 1 0x%x != 0x51 for Teles S0/16!\n",
unit, b0);
isic_detach_common(dev);
return(ENXIO);
}
if(b1 != 0x93)
{
printf("isic%d: Error, signature 2 0x%x != 0x93 for Teles S0/16!\n",
unit, b1);
isic_detach_common(dev);
return(ENXIO);
}
if((b2 != 0x1e) && (b2 != 0x1f))
{
printf("isic%d: Error, signature 3 0x%x != 0x1e or 0x1f for Teles S0/16!\n",
unit, b2);
isic_detach_common(dev);
return(ENXIO);
}
/* get our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not allocate irq for Teles S0/16.\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* register interupt routine */
bus_setup_intr(dev, sc->sc_resources.irq,
INTR_TYPE_NET,
(void(*)(void *))(isicintr),
sc, &ih);
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
/* check IRQ validity */
if((intr_no[sc->sc_irq]) == 1)
{
printf("isic%d: Error, invalid IRQ [%d] specified for Teles S0/16!\n",
unit, sc->sc_irq);
isic_detach_common(dev);
return(ENXIO);
}
return (0);
}
/*---------------------------------------------------------------------------*
* isic_probe_s0163 - probe routine for Teles S0/16.3
*---------------------------------------------------------------------------*/
int
isic_probe_s0163(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* pointer to softc */
void *ih = 0; /* dummy */
bus_space_tag_t t; /* bus things */
bus_space_handle_t h;
u_int8_t b0,b1,b2; /* signature */
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
kprintf("isic%d: Error, unit %d >= ISIC_MAXUNIT for Teles 16.3!\n",
unit, unit);
return(ENXIO);
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
/* see if an io base was supplied */
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Could not get iobase for Teles S0/16.3.\n",
unit);
return(ENXIO);
}
/* set io base */
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
/* Release the resource - re-allocate later with correct size */
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
switch(sc->sc_port)
{
case 0xd80:
case 0xe80:
case 0xf80:
break;
case 0x180:
case 0x280:
case 0x380:
kprintf("isic%d: Error, instead of using iobase 0x%x for your Teles S0/16.3,\n",
unit, sc->sc_port);
kprintf("isic%d: please use 0x%x in the kernel configuration file!\n",
unit, sc->sc_port+0xc00);
isic_detach_common(dev);
return(ENXIO);
break;
default:
kprintf("isic%d: Error, invalid iobase 0x%x specified for Teles S0/16.3!\n",
unit, sc->sc_port);
isic_detach_common(dev);
return(ENXIO);
break;
}
/* set io port resources */
sc->sc_resources.io_rid[0] = 0;
bus_set_resource(dev, SYS_RES_IOPORT, 0, sc->sc_port, 0x20);
sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE);
if(!sc->sc_resources.io_base[0])
{
kprintf("isic%d: Error allocating io at 0x%x for Teles S0/16.3!\n",
unit, sc->sc_port);
isic_detach_common(dev);
return ENXIO;
}
sc->sc_resources.io_rid[1] = 1;
bus_set_resource(dev, SYS_RES_IOPORT, 1,
sc->sc_port-ISAC_OFFS, 0x20);
sc->sc_resources.io_base[1] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[1],
0ul, ~0ul, 1, RF_ACTIVE);
if(!sc->sc_resources.io_base[1])
{
kprintf("isic%d: Error allocating io at 0x%x for Teles S0/16.3!\n",
unit, sc->sc_port-ISAC_OFFS);
isic_detach_common(dev);
return ENXIO;
}
sc->sc_resources.io_rid[2] = 2;
bus_set_resource(dev, SYS_RES_IOPORT, 2,
sc->sc_port-HSCXA_OFFS, 0x20);
sc->sc_resources.io_base[2] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[2],
0ul, ~0ul, 1, RF_ACTIVE);
if(!sc->sc_resources.io_base[2])
{
kprintf("isic%d: Error allocating io at 0x%x for Teles S0/16.3!\n",
unit, sc->sc_port-HSCXA_OFFS);
isic_detach_common(dev);
return ENXIO;
}
sc->sc_resources.io_rid[3] = 3;
bus_set_resource(dev, SYS_RES_IOPORT, 3,
sc->sc_port-HSCXB_OFFS, 0x20);
sc->sc_resources.io_base[3] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[3],
0ul, ~0ul, 1, RF_ACTIVE);
if(!sc->sc_resources.io_base[3])
{
kprintf("isic%d: Error allocating io at 0x%x for Teles S0/16.3!\n",
unit, sc->sc_port-HSCXB_OFFS);
isic_detach_common(dev);
return ENXIO;
}
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = tels0163_read_reg;
sc->writereg = tels0163_write_reg;
sc->readfifo = tels0163_read_fifo;
sc->writefifo = tels0163_write_fifo;
/* setup card type */
sc->sc_cardtyp= CARD_TYPEP_16_3;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
t = rman_get_bustag(sc->sc_resources.io_base[0]);
h = rman_get_bushandle(sc->sc_resources.io_base[0]);
b0 = bus_space_read_1(t, h, 0);
b1 = bus_space_read_1(t, h, 1);
b2 = bus_space_read_1(t, h, 2);
if ( b0 != 0x51 && b0 != 0x10 ) {
kprintf("isic%d: Error, signature 1 0x%x != 0x51 or 0x10 for Teles S0/16.3!\n",
unit, b0);
isic_detach_common(dev);
return ENXIO;
}
if ( b1 != 0x93 ) {
kprintf("isic%d: Error, signature 2 0x%x != 0x93 for Teles S0/16.3!\n",
unit, b1);
isic_detach_common(dev);
return ENXIO;
}
if (( b2 != 0x1c ) && ( b2 != 0x1f )) {
kprintf("isic%d: Error, signature 3 0x%x != (0x1c || 0x1f) for Teles S0/16.3!\n",
unit, b2);
isic_detach_common(dev);
return ENXIO;
}
/*
* Read HSCX A/B VSTR. Expected value for the S0/16.3 card is
* 0x05 or 0x04 (for older 16.3's) in the least significant bits.
*/
if( (((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(0, H_VSTR) & 0xf) != 0x4)) ||
(((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(1, H_VSTR) & 0xf) != 0x4)) )
{
kprintf("isic%d: HSCX VSTR test failed for Teles S0/16.3\n",
unit);
kprintf("isic%d: HSC0: VSTR: %#x\n",
unit, HSCX_READ(0, H_VSTR));
kprintf("isic%d: HSC1: VSTR: %#x\n",
unit, HSCX_READ(1, H_VSTR));
isic_detach_common(dev);
return (ENXIO);
}
/* get our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
kprintf("isic%d: Could not get IRQ for Teles S0/16.3.\n",unit);
isic_detach_common(dev);
return ENXIO;
}
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
switch(sc->sc_irq)
{
case 2:
case 9:
case 5:
case 10:
case 12:
case 15:
break;
default:
kprintf("isic%d: Error, invalid IRQ [%d] specified for Teles S0/16.3!\n",
unit, sc->sc_irq);
isic_detach_common(dev);
return(ENXIO);
break;
}
/* register interupt routine */
bus_setup_intr(dev, sc->sc_resources.irq,
0, (void(*)(void *))(isicintr),
sc, &ih, NULL);
return (0);
}
