static void it8772f_init(device_t dev)
{
struct superio_ite_it8772f_config *conf = dev->chip_info;
struct resource *res;
if (!dev->enabled)
return;
switch (dev->path.pnp.device) {
case IT8772F_EC:
res = find_resource(dev, PNP_IDX_IO0);
if (!res)
break;
/* Enable PECI if configured */
it8772f_enable_peci(res, conf->peci_tmpin);
/* Enable FANx if configured */
if (conf->fan1_enable)
it8772f_enable_fan(res, 1);
if (conf->fan2_enable)
it8772f_enable_fan(res, 2);
if (conf->fan3_enable)
it8772f_enable_fan(res, 3);
break;
case IT8772F_GPIO:
/* Set GPIO output levels */
res = find_resource(dev, PNP_IDX_IO1);
if (res) {
if (conf->gpio_set1)
outb(conf->gpio_set1, res->base + 0);
if (conf->gpio_set2)
outb(conf->gpio_set2, res->base + 1);
if (conf->gpio_set3)
outb(conf->gpio_set3, res->base + 2);
if (conf->gpio_set4)
outb(conf->gpio_set4, res->base + 3);
if (conf->gpio_set5)
outb(conf->gpio_set5, res->base + 4);
if (conf->gpio_set6)
outb(conf->gpio_set6, res->base + 5);
}
break;
case IT8772F_KBCK:
if (!conf->skip_keyboard) {
set_kbc_ps2_mode();
pc_keyboard_init(&conf->keyboard);
}
break;
case IT8772F_KBCM:
break;
case IT8772F_IR:
break;
}
}
static void it8772f_init(struct device *dev)
{
struct superio_ite_it8772f_config *conf = dev->chip_info;
struct resource *res;
if (!dev->enabled)
return;
switch (dev->path.pnp.device) {
case IT8772F_EC:
res = find_resource(dev, PNP_IDX_IO0);
if (!res)
break;
/* Enable PECI if configured */
it8772f_enable_peci(res, conf->peci_tmpin);
/* Enable HWM if configured */
if (conf->tmpin1_mode != THERMAL_MODE_DISABLED)
it8772f_enable_tmpin(res, 1, conf->tmpin1_mode);
if (conf->tmpin2_mode != THERMAL_MODE_DISABLED)
it8772f_enable_tmpin(res, 2, conf->tmpin2_mode);
/* Enable FANx if configured */
if (conf->fan1_enable)
it8772f_enable_fan(res, 1, 0);
if (conf->fan2_enable)
it8772f_enable_fan(res, 2,
conf->fan2_speed ? conf->fan2_speed : 0x80);
if (conf->fan3_enable)
it8772f_enable_fan(res, 3,
conf->fan3_speed ? conf->fan3_speed : 0x80);
/*
* System may get wrong temperature data when SIO is in
* busy state. Therefore, check the status and terminate
* processes if needed.
*/
it8772f_extemp_force_idle_status(res);
break;
case IT8772F_GPIO:
/* Set GPIO output levels */
res = find_resource(dev, PNP_IDX_IO1);
if (res) {
if (conf->gpio_set1)
outb(conf->gpio_set1, res->base + 0);
if (conf->gpio_set2)
outb(conf->gpio_set2, res->base + 1);
if (conf->gpio_set3)
outb(conf->gpio_set3, res->base + 2);
if (conf->gpio_set4)
outb(conf->gpio_set4, res->base + 3);
if (conf->gpio_set5)
outb(conf->gpio_set5, res->base + 4);
if (conf->gpio_set6)
outb(conf->gpio_set6, res->base + 5);
}
break;
case IT8772F_KBCK:
if (!conf->skip_keyboard) {
set_kbc_ps2_mode();
pc_keyboard_init(NO_AUX_DEVICE);
}
break;
case IT8772F_KBCM:
break;
case IT8772F_IR:
break;
}
}