static void
load_acc_offset(int offset)
{
acc_const = 0;
if (acc_loaded) {
if (acc_offset == offset) return;
if (acc_dirty)
clean_acc();
}
acc_offset = offset;
if (tape_step > 1) {
if (acc_offset) {
jit_ldxi_i(REG_ACC, REG_P, acc_offset * tape_step);
} else {
jit_ldr_i(REG_ACC, REG_P);
}
} else {
if (acc_offset) {
jit_ldxi_uc(REG_ACC, REG_P, acc_offset);
} else {
jit_ldr_uc(REG_ACC, REG_P);
}
}
acc_loaded = 1;
acc_dirty = 0;
acc_hi_dirty = (tape_step*8 != cell_size);
}
void
_jit_getarg_i(jit_state_t *_jit, jit_int32_t u, jit_node_t *v)
{
assert(v->code == jit_code_arg);
if (jit_arg_reg_p(v->u.w))
jit_movr(u, _I0 + v->u.w);
else
jit_ldxi_i(u, JIT_FP, v->u.w);
}
void stack_pop(int reg, int *sp)
{
*sp -= sizeof (int);
jit_ldxi_i (reg, JIT_FP, *sp);
}
void
run_gnulightning(void)
{
struct bfi * n = bfprog;
int maxstack = 0, stackptr = 0;
char *strbuf = 0;
size_t maxstrlen = 0;
#ifdef GNULIGHTv1
jit_insn** loopstack = 0;
jit_insn *codeBuffer;
void * startptr;
int argp;
#endif
#ifdef GNULIGHTv2
jit_node_t *start, *end; /* For size of code */
jit_node_t** loopstack = 0;
jit_node_t *argp;
#endif
if (cell_size == 8) tape_step = 1; else
tape_step = sizeof(int);
#ifdef GNULIGHTv1
/* TODO: Use mmap for allocating memory, the x86 execute protection
* bit is on the segment so Linux has to say thay everything below
* a specific address is executable. If you ask mmap for executable
* memory it can put it below the current value. The mprotect()
* function can't do this.
*/
if (total_nodes < 4096)
codeBuffer = malloc(65536);
else
codeBuffer = malloc(16 * total_nodes);
save_ptr_for_free(codeBuffer);
codeptr = (codeptr_t) jit_set_ip(codeBuffer).vptr;
startptr = jit_get_ip().ptr;
/* Function call prolog */
jit_prolog(1);
/* Get the data area pointer */
argp = jit_arg_p();
jit_getarg_p(REG_P, argp);
#endif
#ifdef GNULIGHTv2
init_jit(NULL); // argv[0]);
_jit = jit_new_state();
start = jit_note(__FILE__, __LINE__);
jit_prolog();
/* Get the data area pointer */
argp = jit_arg();
jit_getarg(REG_P, argp);
#endif
while(n)
{
switch(n->type)
{
case T_MOV:
if (acc_loaded)
acc_offset -= n->count;
jit_addi(REG_P, REG_P, n->count * tape_step);
break;
case T_ADD:
load_acc_offset(n->offset);
set_acc_offset(n->offset);
jit_addi(REG_ACC, REG_ACC, n->count);
break;
case T_SET:
set_acc_offset(n->offset);
if (acc_const && acc_const_val == n->count) {
;
} else if (acc_const && acc_const_val+1 == n->count) {
jit_addi(REG_ACC, REG_ACC, 1);
} else if (acc_const && acc_const_val-1 == n->count) {
jit_addi(REG_ACC, REG_ACC, -1);
} else {
jit_movi(REG_ACC, n->count);
}
acc_const = 1;
acc_const_val = n->count;
break;
case T_CALC:
if (n->offset == n->offset2 && n->count2 == 1) {
load_acc_offset(n->offset);
set_acc_offset(n->offset);
if (n->count)
jit_addi(REG_ACC, REG_ACC, n->count);
} else if (n->count2 != 0) {
load_acc_offset(n->offset2);
set_acc_offset(n->offset);
if (n->count2 == -1)
jit_negr(REG_ACC, REG_ACC);
else if (n->count2 != 1)
jit_muli(REG_ACC, REG_ACC, n->count2);
if (n->count)
jit_addi(REG_ACC, REG_ACC, n->count);
} else {
clean_acc();
set_acc_offset(n->offset);
jit_movi(REG_ACC, n->count);
if (n->count2 != 0) {
if (tape_step > 1)
jit_ldxi_i(REG_A1, REG_P, n->offset2 * tape_step);
else
jit_ldxi_uc(REG_A1, REG_P, n->offset2);
if (n->count2 == -1)
jit_negr(REG_A1, REG_A1);
else if (n->count2 != 1)
jit_muli(REG_A1, REG_A1, n->count2);
jit_addr(REG_ACC, REG_ACC, REG_A1);
}
}
if (n->count3 != 0) {
if (tape_step > 1)
jit_ldxi_i(REG_A1, REG_P, n->offset3 * tape_step);
else
jit_ldxi_uc(REG_A1, REG_P, n->offset3);
if (n->count3 == -1)
jit_negr(REG_A1, REG_A1);
else if (n->count3 != 1)
jit_muli(REG_A1, REG_A1, n->count3);
jit_addr(REG_ACC, REG_ACC, REG_A1);
}
break;
case T_IF: case T_MULT: case T_CMULT:
case T_WHL:
load_acc_offset(n->offset);
clean_acc();
acc_const = acc_loaded = 0;
if (stackptr >= maxstack) {
loopstack = realloc(loopstack,
((maxstack+=32)+2)*sizeof(*loopstack));
if (loopstack == 0) {
perror("loop stack realloc failure");
exit(1);
}
}
if (cell_mask > 0 && acc_hi_dirty) {
if (cell_mask == 0xFF)
jit_extr_uc(REG_ACC,REG_ACC);
else
jit_andi(REG_ACC, REG_ACC, cell_mask);
}
#ifdef GNULIGHTv1
loopstack[stackptr] = jit_beqi_i(jit_forward(), REG_ACC, 0);
loopstack[stackptr+1] = jit_get_label();
#endif
#ifdef GNULIGHTv2
loopstack[stackptr] = jit_beqi(REG_ACC, 0);
loopstack[stackptr+1] = jit_label();
#endif
stackptr += 2;
break;
case T_END:
load_acc_offset(n->offset);
clean_acc();
stackptr -= 2;
if (stackptr < 0) {
fprintf(stderr, "Code gen failure: Stack pointer negative.\n");
exit(1);
}
if (cell_mask > 0 && acc_hi_dirty) {
if (cell_mask == 0xFF)
jit_extr_uc(REG_ACC,REG_ACC);
else
jit_andi(REG_ACC, REG_ACC, cell_mask);
}
#ifdef GNULIGHTv1
jit_bnei_i(loopstack[stackptr+1], REG_ACC, 0);
jit_patch(loopstack[stackptr]);
#endif
#ifdef GNULIGHTv2
{
jit_node_t *ref;
ref = jit_bnei(REG_ACC, 0);
jit_patch_at(ref, loopstack[stackptr+1]);
jit_patch(loopstack[stackptr]);
}
#endif
break;
case T_ENDIF:
clean_acc();
acc_const = acc_loaded = 0;
stackptr -= 2;
if (stackptr < 0) {
fprintf(stderr, "Code gen failure: Stack pointer negative.\n");
exit(1);
}
jit_patch(loopstack[stackptr]);
break;
case T_PRT:
clean_acc();
load_acc_offset(n->offset);
acc_loaded = 0;
#ifdef GNULIGHTv1
jit_prepare_i(1);
jit_pusharg_i(REG_ACC);
jit_finish(putch);
#endif
#ifdef GNULIGHTv2
jit_prepare();
jit_pushargr(REG_ACC);
jit_finishi(putch);
#endif
break;
case T_CHR:
clean_acc();
acc_const = acc_loaded = 0;
if (n->count <= 0 || (n->count >= 127 && iostyle == 1) ||
!n->next || n->next->type != T_CHR) {
jit_movi(REG_ACC, n->count);
#ifdef GNULIGHTv1
jit_prepare_i(1);
jit_pusharg_i(REG_ACC);
jit_finish(putch);
#endif
#ifdef GNULIGHTv2
jit_prepare();
jit_pushargr(REG_ACC);
jit_finishi(putch);
#endif
} else {
unsigned i = 0;
struct bfi * v = n;
char *s;
while(v->next && v->next->type == T_CHR &&
v->next->count > 0 &&
(v->next->count < 127 || iostyle != 1)) {
if (i+2 > maxstrlen) {
if (maxstrlen) maxstrlen *= 2; else maxstrlen = 4096;
strbuf = realloc(strbuf, maxstrlen);
if (!strbuf) {
fprintf(stderr, "Reallocate of string buffer failed\n");
exit(42);
}
}
strbuf[i++] = (char) /*GCC -Wconversion*/ v->count;
n = v;
v = v->next;
}
strbuf[i] = 0;
s = strdup(strbuf);
if (!s) {
fprintf(stderr, "Save of string failed\n");
exit(43);
}
save_ptr_for_free(s);
#ifdef GNULIGHTv1
jit_movi_p(REG_ACC, s);
jit_prepare_i(1);
jit_pusharg_i(REG_ACC);
jit_finish(puts_without_nl);
#endif
#ifdef GNULIGHTv2
jit_prepare();
jit_pushargi((jit_word_t) s);
jit_finishi(puts_without_nl);
#endif
}
break;
case T_INP:
load_acc_offset(n->offset);
set_acc_offset(n->offset);
#ifdef GNULIGHTv1
jit_prepare_i(1);
jit_pusharg_i(REG_ACC);
jit_finish(getch);
jit_retval_i(REG_ACC);
#endif
#ifdef GNULIGHTv2
jit_prepare();
jit_pushargr(REG_ACC);
jit_finishi(getch);
jit_retval(REG_ACC);
#endif
break;
case T_STOP:
#ifdef GNULIGHTv1
jit_prepare_i(0);
jit_finish(failout);
#endif
#ifdef GNULIGHTv2
jit_prepare();
jit_finishi(failout);
#endif
break;
case T_NOP:
case T_DUMP:
fprintf(stderr, "Warning on code generation: "
"%s node: ptr+%d, cnt=%d, @(%d,%d).\n",
tokennames[n->type],
n->offset, n->count, n->line, n->col);
break;
default:
fprintf(stderr, "Code gen error: "
"%s\t"
"%d:%d, %d:%d, %d:%d\n",
tokennames[n->type],
n->offset, n->count,
n->offset2, n->count2,
n->offset3, n->count3);
exit(1);
}
n=n->next;
#if 0 /*def GNULIGHTv2 */
if(n && enable_trace) {
char *p, buf[250];
clean_acc();
acc_loaded = 0;
sprintf(buf, "@(%d,%d)\n", n->line, n->col);
p = strdup(buf);
save_ptr_for_free(p);
jit_prepare();
jit_pushargi((jit_word_t) p);
jit_finishi(puts_without_nl);
}
#endif
#ifdef GNULIGHTv1
/* TODO -- Check for codeBuffer overflow (add jmp to new) */
#endif
}
jit_ret();
if (strbuf) { maxstrlen = 0; free(strbuf); strbuf = 0; }
delete_tree();
#ifdef GNULIGHTv1
jit_flush_code(startptr, jit_get_ip().ptr);
if (verbose)
fprintf(stderr, "Generated %d bytes of V1 GNU Lightning code, running\n",
(int)(jit_get_ip().ptr - (char*)startptr));
start_runclock();
codeptr(map_hugeram());
finish_runclock(&run_time, &io_time);
#endif
#ifdef GNULIGHTv2
jit_epilog();
end = jit_note(__FILE__, __LINE__);
codeptr = jit_emit();
if (verbose)
fprintf(stderr, "Generated %d bytes of V2 GNU Lightning code, running\n",
(int)((char*)jit_address(end) - (char*)jit_address(start)));
jit_clear_state();
// jit_disassemble();
start_runclock();
codeptr(map_hugeram());
finish_runclock(&run_time, &io_time);
#endif
#if 0
/* This code writes the generated instructions to a file
* so we can disassemble it using: ndisasm -b 32/64 code.bin */
{
#ifdef GNULIGHTv1
char *p = startptr;
int s = jit_get_ip().ptr - p;
#endif
#ifdef GNULIGHTv2
char *p = (char*)jit_address(start);
int s = (char*)jit_address(end) - p;
#endif
FILE *fp = fopen("code.bin", "w");
int i;
for (i = 0; i < s; ++i) {
fputc(p[i], fp);
}
fclose(fp);
}
#endif
#ifdef GNULIGHTv2
jit_destroy_state();
finish_jit();
#endif
codeptr = 0;
if (loopstack) { free(loopstack); loopstack = 0; }
free_saved_memory();
}
static void
popr (int reg, int *sp)
{
*sp -= sizeof (int);
jit_ldxi_i (reg, JIT_FP, *sp);
}