int main( int argc , char * argv[] )
{
kb_device_config_t * dev;
kb_register_config_t * reg;
knet_dev_t *koala;
int rc;
unsigned char buf[10];
unsigned char a,b,c,d;
kb_set_debug_level( 2 );
if((rc = kb_init( argc , argv )) < 0 )
return 1;
kb_enum_section( print_section , 0);
/*
dev = kb_lookup_device( "KoreBot:XScaleVCoreDAC" );
reg = kb_lookup_register( "KoreMotor:Filter");
printf("%X\n" , reg );
if (dev != NULL)
printf("dev=ok\n");
else
printf("dev=KO\n");
*/
return 0;
}
void main( void )
{
errno = 0;
intr_disable();
intr_init();
hw_init();
/* print a banner */
printf( "%s %s\n", os_name, os_version );
memory_init();
device_init();
vfs_init();
/* new line after all initialisation messages */
printf("\n");
kb_init();
console_init();
intr_enable();
/* fire up the shell! */
for(;;) {
shell_start();
printf("Respawning shell\n");
}
}
void kmain(u32 init_stack) {
init_esp_start = init_stack;
init_video();
puts_color_str("Booting Panda OS ...\n", 0x0B);
cli();
time_init();
gdt_init();
idt_init();
kb_init();
mm_init();
buf_init();
file_init();
inode_init();
ide_init();
task_init();
timer_init();
sysc_init();
spawn(init_user);
sti();
init = 0;
while(1) {
if(!init) {
printk("kernel running ...\n");
init = 1;
}
sti();
sched();
}
}
int32
main(int32 argc, char *argv[])
{
kb_t kb;
stat_t *st;
cmd_ln_t *config;
print_appl_info(argv[0]);
cmd_ln_appl_enter(argc, argv, "default.arg", arg);
unlimit();
config = cmd_ln_get();
kb_init(&kb, config);
st = kb.stat;
fprintf(stdout, "\n");
if (cmd_ln_str_r(config, "-ctl")) {
/* When -ctlfile is speicified, corpus.c will look at -ctl_lm and
-ctl_mllr to get the corresponding LM and MLLR for the utterance */
st->tm = ctl_process(cmd_ln_str_r(config, "-ctl"),
cmd_ln_str_r(config, "-ctl_lm"),
cmd_ln_str_r(config, "-ctl_mllr"),
cmd_ln_int32_r(config, "-ctloffset"),
cmd_ln_int32_r(config, "-ctlcount"), utt_decode, &kb);
}
else if (cmd_ln_str_r(config, "-utt")) {
/* When -utt is specified, corpus.c will wait for the utterance to
change */
st->tm = ctl_process_utt(cmd_ln_str_r(config, "-utt"),
cmd_ln_int32_r(config, "-ctlcount"),
utt_decode, &kb);
}
else {
/* Is error checking good enough?" */
E_FATAL("Both -utt and -ctl are not specified.\n");
}
if (kb.matchsegfp)
fclose(kb.matchsegfp);
if (kb.matchfp)
fclose(kb.matchfp);
stat_report_corpus(kb.stat);
kb_free(&kb);
#if (! WIN32)
#if defined(_SUN4)
system("ps -el | grep sphinx3_decode");
#else
system("ps aguxwww | grep sphinx3_decode");
#endif
#endif
cmd_ln_free_r(config);
exit(0);
}
int main( int argc , char * argv[] )
{
int rc,ver;
/* Set the libkorebot debug level - Highly recommended for development. */
kb_set_debug_level(2);
if((rc = kb_init( argc , argv )) < 0 )
return 1;
signal( SIGINT , ctrlc_handler );
printf("K-Team GPIO Test Program\r\n");
/* Initialize the GPIO and the PWM modules */
kb_pwm_init();
/* parse commands */
while (!quitReq) {
printf("\n> ");
if ( fgets( buf , sizeof(buf) , stdin ) != NULL ) {
buf[strlen(buf)-1] = '\0';
kb_parse_command( buf , cmds , NULL);
}
}
}
int test_int(int N, const unsigned *data)
{
int i, ret;
intmap_t *p, d;
kbtree_t(uint64_t) *h;
kbitr_t itr;
h = kb_init(uint64_t, KB_DEFAULT_SIZE);
for (i = 0; i < N; ++i) {
d.key = data[i]; d.value = i;
if (kb_getp(uint64_t, h, &d) == 0) kb_putp(uint64_t, h, &d);
else kb_delp(uint64_t, h, &d);
d.key = data[i], d.value = 1;
p = kb_getp(uint64_t, h, &d); // kb_get() also works
// IMPORTANT: put() only works if key is absent
if (!p) kb_putp(uint64_t, h, &d);
else ++p->value;
}
// ordered tree traversal
kb_itr_first(uint64_t, h, &itr); // get an iterator pointing to the first
for (; kb_itr_valid(&itr); kb_itr_next(uint64_t, h, &itr)) { // move on
p = &kb_itr_key(intmap_t, &itr);
printf("%d\t%lu\n", p->value, p->key);
}
kb_destroy(int, h);
return 0;
}
int
ld_init(live_decoder_t *decoder, int argc, char **argv)
{
param_t fe_param;
if (argc == 2) {
/*
* lgalescu: check if args need to be processed from file
*/
parse_args_file(argv[1]);
} else
cmd_ln_parse(arg_def, argc, argv);
unlimit();
/* some decoder parameter capturing
* !!! NOTE - HARDCODED FOR NOW. REPLACE WITH PARSE_ARG() ASAP !!!!
*/
memset(decoder, 0, sizeof(live_decoder_t));
kb_init(&decoder->kb);
decoder->max_wpf = cmd_ln_int32 ("-maxwpf");;
decoder->max_histpf = cmd_ln_int32 ("-maxhistpf");
decoder->max_hmmpf = cmd_ln_int32 ("-maxhmmpf");
decoder->phones_skip = cmd_ln_int32 ("-ptranskip");
decoder->hmm_log = cmd_ln_int32("-hmmdump") ? stderr : NULL;
decoder->kbcore = decoder->kb.kbcore;
decoder->kb.uttid = decoder->uttid;
decoder->hypsegs = 0;
decoder->num_hypsegs = 0;
decoder->hypstr_len = 0;
decoder->hypstr[0] = '\0';
decoder->features =
feat_array_alloc(kbcore_fcb(decoder->kbcore), LIVEBUFBLOCKSIZE);
decoder->ld_state = LD_STATE_IDLE;
/* some front-end parameter capturing
* !!! NOTE - HARDCODED FOR NOW. REPLACE WITH PARSE_ARG() ASAP !!!!
*/
memset(&fe_param, 0, sizeof(param_t));
fe_param.SAMPLING_RATE = (float32)cmd_ln_int32 ("-samprate");
fe_param.LOWER_FILT_FREQ = cmd_ln_float32("-lowerf");
fe_param.UPPER_FILT_FREQ = cmd_ln_float32("-upperf");
fe_param.NUM_FILTERS = cmd_ln_int32("-nfilt");
fe_param.FRAME_RATE = cmd_ln_int32("-frate");
fe_param.PRE_EMPHASIS_ALPHA = cmd_ln_float32("-alpha");
fe_param.FFT_SIZE = cmd_ln_int32("-nfft");
fe_param.WINDOW_LENGTH = cmd_ln_float32("-wlen");
decoder->fe = fe_init(&fe_param);
if (!decoder->fe) {
E_WARN("Front end initialization fe_init() failed\n");
return -1;
}
return 0;
}
/* This routine initializes decoder variables for live mode decoding */
void live_initialize_decoder(char *live_args)
{
static kb_t live_kb;
int32 maxcepvecs, maxhyplen, samprate, ceplen;
param_t *fe_param;
/*char const *uttIdNotDefined = "null";*/
parse_args_file(live_args);
unlimit();
kb_init(&live_kb);
kb = &live_kb;
kbcore = kb->kbcore;
kb->uttid = ckd_calloc(1000,sizeof(char));
hmmdumpfp = cmd_ln_int32("-hmmdump") ? stderr : NULL;
maxwpf = cmd_ln_int32 ("-maxwpf");
maxhistpf = cmd_ln_int32 ("-maxhistpf");
maxhmmpf = cmd_ln_int32 ("-maxhmmpf");
ptranskip = cmd_ln_int32 ("-ptranskip");
maxhyplen = cmd_ln_int32 ("-maxhyplen");
if (!parthyp)
parthyp = (partialhyp_t *) ckd_calloc(maxhyplen, sizeof(partialhyp_t));
parthyplen = 0;
fe_param = (param_t *) ckd_calloc(1, sizeof(param_t));
samprate = cmd_ln_int32 ("-samprate");
if (samprate != 8000 && samprate != 16000)
E_FATAL("Sampling rate %d not supported. Must be 8000 or 16000\n",samprate);
fe_param->SAMPLING_RATE = (float32) samprate;
fe_param->LOWER_FILT_FREQ = cmd_ln_float32("-lowerf");
fe_param->UPPER_FILT_FREQ = cmd_ln_float32("-upperf");
fe_param->NUM_FILTERS = cmd_ln_int32("-nfilt");
/* 20040413, by ARCHAN. Clear the hardwiring.
Hmm. Many people say no to do this, I just can't take it.
*/
fe_param->FRAME_RATE = cmd_ln_int32("-frate");
/* fe_param->FRAME_RATE = 100; */
fe_param->PRE_EMPHASIS_ALPHA = cmd_ln_float32("-alpha");
fe_param->FFT_SIZE = cmd_ln_int32("-nfft");
fe_param->WINDOW_LENGTH = cmd_ln_float32("-wlen");
fe_param->doublebw=OFF;
fe = fe_init(fe_param);
if (!fe)
E_FATAL("Front end initialization fe_init() failed\n");
maxcepvecs = cmd_ln_int32 ("-maxcepvecs");
ceplen = kbcore->fcb->cepsize;
dummyframe = (float32*) ckd_calloc(1 * ceplen,sizeof(float32)); /* */
}
void init(void)
{
exceptions_init();
hide_cursor();
vga_setcolor(0x07);
pic_init();
idt_write_table();
kb_init(); //Init keyboard driver
floppy_init();
lex_init();
printf("\nSystem booted.\n\n");
}
void kmain(void)
{
const char *str = "This is a basic kernel, it will only echo back what you type with a limited keyboard charset.";
reset(input);
clear_screen();
kprint(str);
kprint_newline();
idt_init();
kb_init();
while(1);
}
void kmain(void)
{
char *str = "my first kernel with keyboard support";
clear_screen();
kprint(str);
kprint_newline();
kprint_newline();
idt_init();
kb_init();
while(1);
}
void init_all() {
DDRC |= _BV(PC5);
PORTC |= _BV(PC5);
_delay_ms(5000);
PORTC &= !_BV(PC5);
uart_init(ISR_STATE);
kb_init();
pwm_init();
uart_tx_str("Booted up correctly!\r\n");
sei();
}
/*! kgripper_init initializes the KoreBot library
* This function needs to be called BEFORE any other functions.
*
* \param none
*
* \return A value:
* - <0 on error
* - 0 on success
*
*/
int kgripper_init( void )
{
int rc;
/* First of all this function initializes the korebot library */
if((rc = kb_init( 0 , NULL )) < 0 )
{
/* Unable to initialize the korebot library */
KB_ERROR("kb_kh3_init",KB_ERROR_KH3KBINIT);
return KH3_ERROR_KBINIT;
}
}
/* This routine initializes decoder variables for live mode decoding */
void live_initialize_decoder(char *live_args)
{
static kb_t live_kb;
int32 maxcepvecs, maxhyplen, samprate, ceplen;
param_t *fe_param;
char const *uttIdNotDefined = "null";
parse_args_file(live_args);
unlimit();
kb_init(&live_kb);
kb = &live_kb;
kbcore = kb->kbcore;
kb->uttid = ckd_salloc(uttIdNotDefined);
hmmdumpfp = cmd_ln_int32("-hmmdump") ? stderr : NULL;
maxwpf = cmd_ln_int32 ("-maxwpf");
maxhistpf = cmd_ln_int32 ("-maxhistpf");
maxhmmpf = cmd_ln_int32 ("-maxhmmpf");
ptranskip = cmd_ln_int32 ("-ptranskip");
maxhyplen = cmd_ln_int32 ("-maxhyplen");
if (!parthyp)
parthyp = (partialhyp_t *) ckd_calloc(maxhyplen, sizeof(partialhyp_t));
fe_param = (param_t *) ckd_calloc(1, sizeof(param_t));
samprate = cmd_ln_int32 ("-samprate");
if (samprate != 8000 && samprate != 16000)
E_FATAL("Sampling rate %s not supported. Must be 8000 or 16000\n",samprate);
fe_param->SAMPLING_RATE = (float32) samprate;
fe_param->LOWER_FILT_FREQ = cmd_ln_float32("-lowerf");
fe_param->UPPER_FILT_FREQ = cmd_ln_float32("-upperf");
fe_param->NUM_FILTERS = cmd_ln_int32("-nfilt");
fe_param->FRAME_RATE = 100; /* HARD CODED TO 100 FRAMES PER SECOND */
fe_param->PRE_EMPHASIS_ALPHA = (float32) 0.97;
fe = fe_init(fe_param);
if (!fe)
E_FATAL("Front end initialization fe_init() failed\n");
maxcepvecs = cmd_ln_int32 ("-maxcepvecs");
ceplen = kbcore->fcb->cepsize;
dummyframe = (float32*) ckd_calloc(1 * ceplen,sizeof(float32)); /* */
#if defined(THRD)
score_barrier = thread_barrier_init(NUM_THREADS);
if (!score_barrier)
E_FATAL("Cannot initialize score_barrier\n");
#endif
}
void init(void) {
PORTD |= _BV(SELECT);
PORTD |= _BV(CYCLE);
PORTD |= _BV(MENU);
//LED used for debugging
DDRB = 1 << PB0; // PB0 as output
kb_init();
usbInit();
lcd_init(LCD_DISP_ON);
lcd_puts("..");
_delay_ms(20);
}
/*! SPI FLASH test !*/
void sf_test(void)
{
uint8_t datas[6502];
int kd;
int flag;
int i;
kb_init();
sp_init();
sp_puts("SPI FLASH Test\r\n");
sf_init();
for(i = 0; i < 6502; i++) datas[i] = i;
for(;;)
{
kb_scan();
kd = kb_get(KB_DOWN);
if(kd & KEY_0)
{
sp_puts("SPI FLASH write datas ... ");
sf_write(0x8051, datas, 6502);
sp_puts("OK\r\n");
}
if(kd & KEY_1)
{
for(i = 0; i < 6502; i++) datas[i] = 0;
sp_puts("SPI FLASH read datas ... ");
sf_read(0x8051, datas, 6502);
sp_puts("OK\r\n");
sp_puts("SPI FLASH verify datas ... ");
flag = 0;
for(i = 0; i < 6502; i++)
{
if(datas[i] != i)
{
flag = 1;
break;
}
}
if(flag == 0) sp_puts("SUCCESS\r\n");
else sp_puts("FAILED\r\n");
}
}
}
void main(void)
{
lcd_init();
kb_init();
kb_cmd(0xED);
kb_cmd(0x07);
lcd_char(kb_getdata());
kb_cmd(0xED);
kb_cmd(0x03);
while(1)
{
lcd_char(kb_getdata());
}
}
int main( int argc , char * argv[] )
{
int rc,ver;
/* Set the libkorebot debug level - Highly recommended for development. */
kb_set_debug_level(2);
if((rc = kb_init( argc , argv )) < 0 )
return 1;
signal( SIGINT , ctrlc_handler );
printf("K-Team KoreIO Test Program\r\n");
koreio = knet_open( "KoreIOLE:Board", KNET_BUS_ANY, 0 , NULL );
if(!koreio)
{
printf("Cannot open KoreIO device trying alternate address\r\n");
koreio = knet_open( "KoreIOLE:AltBoard", KNET_BUS_ANY, 0 , NULL );
if(!koreio)
{
printf("Cannot open KoreIO device\r\n");
return 1;
}
}
/* Get and display the koreio firmware version */
kio_GetFWVersion(koreio,&ver);
printf("KoreIO firmware %d.%d\r\n", (ver&0x000000F0)>>4, (ver&0x0000000F));
/* parse commands */
while (!quitReq) {
printf("\n> ");
if ( fgets( buf , sizeof(buf) , stdin ) != NULL ) {
buf[strlen(buf)-1] = '\0';
kb_parse_command( buf , cmds , NULL);
}
}
knet_close( koreio );
}
/**
* Initialize the templ theme
* @param hue [0..360] hue value from HSV color space to define the theme's base color
* @param font pointer to a font (NULL to use the default)
* @return pointer to the initialized theme
*/
lv_theme_t * lv_theme_templ_init(uint16_t hue, lv_font_t *font)
{
if(font == NULL) font = LV_FONT_DEFAULT;
_hue = hue;
_font = font;
/*For backward compatibility initialize all theme elements with a default style */
uint16_t i;
lv_style_t **style_p = (lv_style_t**) &theme;
for(i = 0; i < sizeof(lv_theme_t) / sizeof(lv_style_t*); i++) {
*style_p = &def;
style_p++;
}
basic_init();
cont_init();
btn_init();
label_init();
img_init();
line_init();
led_init();
bar_init();
slider_init();
sw_init();
lmeter_init();
gauge_init();
chart_init();
cb_init();
btnm_init();
kb_init();
mbox_init();
page_init();
ta_init();
list_init();
ddlist_init();
roller_init();
tabview_init();
win_init();
return &theme;
}
int main()
{
kb_init(&keyboard);
stb_fake_model_init(&model);
gl_view_init(&view);
ctrl_init(&ctrl);
ctrl_set_view(&view);
ctrl_set_model(&model);
kb_set_callback(ctrl.handler);
view.start();
ctrl.start();
keyboard.start();
model.deinit();
puts("finish");
}
int main()
{
//Start video driver (must always be before loading message)
mm_init();
pg_init();
real_init();
video_init();
video_setdriver(video_vgatext_getdriver(),0);
//Put loading message
cli_puts("ArcaneOS Loading...\n");
//Setup kernel
gdt_init();
idt_init();
isr_init();
irq_init();
timer_init();
kb_init();
ui_init();
cpuid_init();
cmos_init();
rtc_init();
acpi_init();
power_init();
mt_init();
syscall_init();
floppy_init();
__asm__ __volatile__ ("sti");
//Enable ACPI
acpi_enable();
//Create thread for ui
mt_create_thread(mt_kernel_process,test,2);
//Endless loop to prevent bugs when all threads are sleeping
for(;;)
__asm__ __volatile__ ("hlt");
}
// Starts system
void
init_system(multiboot_info_t* bi)
{
// Start display
vga_init();
printk(" KiteOS V1.0 --- Initializing \n");
// PIT-less wait to show user boot
for(int i=0;i<64821125;i++);
vga_color(0x3, 0x0);
printk("-- STARTING LOWLEVEL KERNEL --\n");
vga_color(0x5, 0x0);
printk("!* Initiating GDT\n");
gdt_init();
printk("!* Initiating IDT\n");
idt_init();
printk("!* Installing Exceptions\n");
isr_init();
vga_color(0x4, 0x0);
printk("*** ENTERTED PROTECTED MODE ***\n");
vga_color(0x5, 0x0);
printk("!* Initiating IRQ\n");
irq_init();
printk("!* Starting PIT\n");
pit_init();
printk("!* Starting RTC\n");
rtc_init();
printk("!* Restoring Interrupts\n");
__asm__ __volatile__ ("sti");
vga_color(0x3, 0x0);
printk("-- STARTING LOWLEVEL DRIVERS --\n");
vga_color(0x5, 0x0);
printk("!* Starting physical memory manager\n");
kalloc_init((void*)bi->mmap_addr, (unsigned long)bi->mmap_length);
printk("!* Starting keyboard driver\n");
kb_init();
printk("!* Starting IDE driver\n");
ide_init(0x1F0, 0x3F6, 0x170, 0x366);
vga_color(0x4, 0x0);
printk("*** Initialized system successfully ***\n");
}
/**
* Initialize the console of a certain tty.
*
* @param tty Whose console is to be initialized.
*****************************************************************************/
PUBLIC void init_screen(TTY* tty)
{
int nr_tty = tty - tty_table;
CONSOLE * con = console_table + nr_tty;
con->con_tty = tty;
tty->tty_devwrite = cons_write;
tty->tty_echo = out_char;
kb_init(tty);
/*
* NOTE:
* variables related to `position' and `size' below are
* in WORDs, but not in BYTEs.
*/
int v_mem_size = V_MEM_SIZE >> 1; /* size of Video Memory */
int size_per_con = v_mem_size / NR_CONSOLES;
con->orig = nr_tty * size_per_con;
con->con_size = size_per_con / SCR_WIDTH * SCR_WIDTH;
con->cursor = con->crtc_start = con->orig;
con->is_full = 0;
tty->tty_dev = con;
if (nr_tty == 0) {
((CONSOLE *)tty->tty_dev)->cursor = disp_pos / 2;
disp_pos = 0;
}
/*else {*/
/*
* `?' in this string will be replaced with 0, 1, 2, ...
*/
/* const char prompt[] = "[tty #?]\n";
const char * p = prompt;
for (; *p; p++)
out_char(tty, *p == '?' ? nr_tty + '0' : *p);
}*/
set_cursor(((CONSOLE *)tty->tty_dev)->cursor);
}
/*!
* This function open and initializes the default sound devices
*
* \param snd pointer to a snd_t structure
* \return an error code
* - 1 error
* - 0 no error
*/
int kb_snd_openDevices( snd_t *snd )
{
int rc;
/* Initialize the korebot library return with 1 if any issue */
if((rc= kb_init( 0, NULL )) < 0 )
return 1;
KB_DEBUG( "kb_openDevices", 0, "kb_init Ok");
/* Initialize the korebot sound devices */
kb_snd_init( snd , "/dev/sound/dsp" , "/dev/sound/mixer" );
/* open the sound device return with 1 if any issue */
if (kb_snd_open(snd) < 0 ) {
fprintf(stderr , "unable to open sound device\n");
return (1);
}
KB_DEBUG( "kb_openDevices", 0, "kb_snd_init Ok");
/* return with success */
return 0;
}
int
s3_decode_init(s3_decode_t * _decode, cmd_ln_t *_config)
{
if (_decode == NULL)
return S3_DECODE_ERROR_NULL_POINTER;
/* capture decoder parameters */
kb_init(&_decode->kb, _config);
/* initialize decoder variables */
_decode->kbcore = _decode->kb.kbcore;
_decode->hyp_frame_num = -1;
_decode->uttid = NULL;
_decode->state = S3_DECODE_STATE_IDLE;
_decode->hyp_str = NULL;
_decode->hyp_segs = NULL;
_decode->swap =
strcmp(cmd_ln_str_r(_config,"-machine_endian"),
cmd_ln_str_r(_config,"-input_endian"));
if (_decode->swap)
E_INFO("Input data WILL be byte swapped\n");
else
E_INFO("Input data will NOT be byte swapped\n");
_decode->phypdump = (cmd_ln_int32_r(_config, "-phypdump"));
if (_decode->phypdump)
E_INFO("Partial hypothesis WILL be dumped\n");
else
E_INFO("Partial hypothesis will NOT be dumped\n");
_decode->rawext = (cmd_ln_str_r(_config, "-rawext"));
return S3_DECODE_SUCCESS;
}
int main( int argc , char * argv[] )
{
int rc,ver,io,ad,pw = 0, freq;
char newpage = 12, state;
uint16_t val;
uint32_t time;
/* Set the libkorebot debug level - Highly recommended for development. */
kb_set_debug_level(2);
if((rc = kb_init( argc , argv )) < 0 )
return 1;
signal( SIGINT , ctrlc_handler );
printf("K-Team KoreIO Test Program\r\n");
koreio = knet_open( "KoreIOLE:Board", KNET_BUS_ANY, 0 , NULL );
if(!koreio)
{
printf("Cannot open KoreIOLE device trying alternate address\r\n");
koreio = knet_open( "KoreIOLE:AltBoard", KNET_BUS_ANY, 0 , NULL );
if(!koreio)
{
printf("Cannot open KoreIOLE device\r\n");
return 1;
}
}
/* Get and display the koreio firmware version */
kio_GetFWVersion(koreio,&ver);
printf("KoreIOLE firmware %d.%d\r\n", (ver&0x000000F0)>>4, (ver&0x0000000F));
/* config all the IO as a output */
io = 0;
while(io < 16)
while(io < 16)
{
kio_ConfigIO(koreio,io,1);
io++;
usleep(1000);
}
/* set one of two Output */
io = 0;
while(io < 16)
{
kio_SetIO(koreio,io);
io+= 2;
}
/* clear one of two Output */
io = 1;
while(io < 16)
{
kio_ClearIO(koreio,io);
io+= 2;
}
/* parse commands */
while (!quitReq) {
printf("\n> ");
/* read all the analog input value */
ad = 0;
while(ad < 12)
{
kio_ReadAnalog(koreio,ad,&val,&time);
printf("read ad %d: %u at %lu mS\r\n",ad,val,time);
ad++;
}
/* blink the output */
io = 0;
while(io < 16)
{
kio_ChangeIO(koreio,io);
io++;
}
/* blink the power output */
kio_ClearPW(koreio,pw);
if(++pw > 5)
pw = 0;
kio_SetPW(koreio,pw);
/*if ( fgets( buf , sizeof(buf) , stdin ) != NULL ) {
buf[strlen(buf)-1] = '\0';
kb_parse_command( buf , cmds , NULL);
}*/
/* clear the current page */
usleep(200000);
printf("%c", newpage);
}
knet_close( koreio );
}
void init_hw() {
kb_init();
usb_init();
while (!usb_configured());
}
int main( int argc , char * argv[] )
{
ksock_t server;
int rc;
unsigned char buf[16];
unsigned char a,b,c,d;
int clntSocket;
char echoBuffer[RCVBUFSIZE]; /* Buffer for echo string */
int recvMsgSize; /* Size of received message */
int port; /* The server port to open */
pthread_t sensor_task;
pthread_t sound_task;
if(argc > 1)
port = atoi(argv[1]);
else
port = 344;
/* Various initialization */
/* Set the libkorebot debug level - Highly recommended for development. */
kb_set_debug_level( 2 );
/* Global libkorebot init */
if((rc = kb_init( argc , argv )) < 0 )
return 1;
/* Korebot socket module init */
if((rc = ksock_init('\n')) < 0 )
return 1;
/* Open the motor devices */
motor1 = knet_open( "KoreMotor:PriMotor1", KNET_BUS_ANY, 0 , NULL );
if(!motor1)
{
printf("Cannot open motor 0\r\n");
return 1;
}
motor0 = knet_open( "KoreMotor:PriMotor2", KNET_BUS_ANY, 0 , NULL );
if(!motor0)
{
printf("Cannot open motor 1\r\n");
return 1;
}
motor3 = knet_open( "KoreMotor:PriMotor3", KNET_BUS_ANY, 0 , NULL );
if(!motor3)
{
printf("Cannot open motor 2\r\n");
return 1;
}
motor2 = knet_open( "KoreMotor:PriMotor4", KNET_BUS_ANY, 0 , NULL );
if(!motor2)
{
printf("Cannot open motor 3\r\n");
return 1;
}
/* KoreMotor Comm test */
kmot_GetFWVersion( motor1, &rc);
printf("Motor 1 Firmware v%u.%u\n" , KMOT_VERSION(rc) , KMOT_REVISION(rc));
/* Intialize motor controller */
InitMotor(motor0);
InitMotor(motor1);
InitMotor(motor2);
InitMotor(motor3);
kmot_SearchLimits(motor0, 10, 3, &minpos0, &maxpos0,100000);
printf("motor0: min:%ld max:%ld\n\r",minpos0, maxpos0);
kmot_SearchLimits(motor1, 10, 3, &minpos1, &maxpos1,100000);
printf("motor1: min:%ld max:%ld\n\r",minpos1, maxpos1);
kmot_SearchLimits(motor2, 10, 3, &minpos2, &maxpos2,100000);
printf("motor2: min:%ld max:%ld\n\r",minpos2, maxpos2);
kmot_SearchLimits(motor3, 10, 3, &minpos3, &maxpos3,100000);
printf("motor3: min:%ld max:%ld\n\r",minpos3, maxpos3);
kmot_SetBlockedTime(motor0,5);
kmot_SetBlockedTime(motor2,5);
/* Network setup - Create a ksock server */
ksock_server_open(&server, port);
ksock_add_command("movecamera",2,2,koa_net_camera);
ksock_add_command("movecamera2",2,2,koa_net_camera2);
ksock_add_command("moveboth",2,2,koa_net_bothcam);
ksock_add_command("initcamera",0,0,koa_net_init);
list_command();
/* Network connection handling */
clntSocket = ksock_next_connection(&server);
for(;;)
{
rc = ksock_get_command(clntSocket, echoBuffer, RCVBUFSIZE);
if(rc>0)
{
ksock_exec_command(echoBuffer);
/* Echo message back to client */
if (send(clntSocket, echoBuffer, rc, 0) != rc)
DieWithError("send() failed");
}
else
switch(rc)
{
case 0 :
break;
case -3 :
printf("Client disconnected\r\n");
clntSocket = ksock_next_connection(&server);
break;
default :
printf("Socket error: %d\r\n",rc);
clntSocket = ksock_next_connection(&server);
break;
}
}
close(clntSocket); /* Close client socket */
return 0;
}
/*
* main()
*/
int main(void) {
kb_init(); // does controller initialization too
kb_led_state_power_on();
usb_init();
while (!usb_configured());
kb_led_delay_usb_init(); // give the OS time to load drivers, etc.
kb_led_state_ready();
for (;;) {
// swap `main_kb_is_pressed` and `main_kb_was_pressed`, then update
bool (*temp)[KB_ROWS][KB_COLUMNS] = main_kb_was_pressed;
main_kb_was_pressed = main_kb_is_pressed;
main_kb_is_pressed = temp;
kb_update_matrix(*main_kb_is_pressed);
// this loop is responsible to
// - "execute" keys when they change state
// - keep track of which layers the keys were on when they were pressed
// (so they can be released using the function from that layer)
//
// note
// - everything else is the key function's responsibility
// - see the keyboard layout file ("keyboard/ergodox/layout/*.c") for
// which key is assigned which function (per layer)
// - see "lib/key-functions/public/*.c" for the function definitions
#define row main_loop_row
#define col main_loop_col
#define layer main_arg_layer
#define is_pressed main_arg_is_pressed
#define was_pressed main_arg_was_pressed
for (row=0; row<KB_ROWS; row++) {
for (col=0; col<KB_COLUMNS; col++) {
is_pressed = (*main_kb_is_pressed)[row][col];
was_pressed = (*main_kb_was_pressed)[row][col];
if (is_pressed != was_pressed) {
if (is_pressed) {
layer = main_layers_peek(0);
main_layers_pressed[row][col] = layer;
main_arg_trans_key_pressed = false;
} else {
layer = main_layers_pressed[row][col];
main_arg_trans_key_pressed = main_kb_was_transparent[row][col];
}
// set remaining vars, and "execute" key
main_arg_row = row;
main_arg_col = col;
main_arg_layer_offset = 0;
main_exec_key();
main_kb_was_transparent[row][col] = main_arg_trans_key_pressed;
}
}
}
#undef row
#undef col
#undef layer
#undef is_pressed
#undef was_pressed
// send the USB report (even if nothing's changed)
usb_keyboard_send();
usb_extra_consumer_send();
_delay_ms(MAKEFILE_DEBOUNCE_TIME);
// update LEDs
/*if (keyboard_leds & (1<<0)) { kb_led_num_on(); }*/
/*else { kb_led_num_off(); }*/
if (keyboard_leds & (1<<1)) { kb_led_caps_on(); }
else { kb_led_caps_off(); }
if (keyboard_leds & (1<<2)) { kb_led_scroll_on(); }
else { kb_led_scroll_off(); }
if (keyboard_leds & (1<<3)) { kb_led_compose_on(); }
else { kb_led_compose_off(); }
if (keyboard_leds & (1<<4)) { kb_led_kana_on(); }
else { kb_led_kana_off(); }
if (layers_head != 0) { kb_led_num_on(); }
else { kb_led_num_off(); }
}
return 0;
}
int main( int argc , char * argv[] )
{
unsigned int ver;
int rc;
char * name;
int32_t position,speed,current;
knet_dev_t *motor0, *motor1;
int32_t minpos0,maxpos0,minpos1,maxpos1;
int32_t tgtmin0,tgtmax0,tgtmax1,tgtmin1;
unsigned char status0,erreur0,status1,erreur1;
int32_t pos0,pos1;
unsigned counter = 10, addr0, addr1;
/*! \todo check args should be rewriten using libpopt */
if(argc < 3)
{
//printf("Usage: pantilt [-a] motor0 motor1 [nb cycle]\r\n");
printf("Usage: pantilt motor0 motor1 [nb cycle]\r\n");
//printf("\t-a to use alternate address (unsuported)\r\n");
printf("\tmotor number is 1,2,3 or 4\r\n");
printf("\tnb cycle is 10 by default\r\n");
return 0;
}
if(argc > 3)
counter = atoi(argv[3]);
else
counter = 10;
/* Set the libkorebot debug level - Highly recommended for development. */
kb_set_debug_level(2);
if((rc = kb_init( argc , argv )) < 0 )
return 1;
printf("K-Team Pantilt Test Program\r\n");
/* Open the motor devices */
motor0 = PantiltOpen(atoi(argv[1]));
if(!motor0)
{
printf("Cannot open motor %d\r\n",atoi(argv[1]));
return 1;
}
motor1 = PantiltOpen(atoi(argv[2]));
if(!motor1)
{
printf("Cannot open motor %d\r\n",atoi(argv[2]));
return 1;
}
/* read controller software version */
kmot_GetFWVersion( motor1, &ver );
printf("Motor 1 Firmware v%u.%u\n" , KMOT_VERSION(ver) , KMOT_REVISION(ver));
/* Intialize motor controller */
InitMotor(motor0);
InitMotor(motor1);
kmot_SearchLimits(motor0, 5, 3, &minpos0, &maxpos0,100000);
tgtmin0 = minpos0 + TGT_MARGIN;
tgtmax0 = maxpos0 - TGT_MARGIN;
printf("motor0: min:%ld max:%ld\n\r",minpos0, maxpos0);
kmot_SearchLimits(motor1, 5, 3, &minpos1, &maxpos1,100000);
tgtmin1 = minpos1 + TGT_MARGIN;
tgtmax1 = maxpos1 - TGT_MARGIN;
printf("motor1: min:%ld max:%ld\n\r",minpos1, maxpos1);
printf("%d: set pos: %ld,%ld\n\r",counter,tgtmin0,tgtmin1);
#if 0
kmot_SetPoint(motor0, kMotRegPosProfile, tgtmin0);
kmot_SetPoint(motor1, kMotRegPosProfile, tgtmin1);
#else
kmot_SetPoint(motor0, kMotRegPos, tgtmin0);
kmot_SetPoint(motor1, kMotRegPos, tgtmin1);
#endif
while(counter)
{
usleep(100000);
printf("%d: set pos: %ld,%ld\n\r",counter,tgtmin0,tgtmin1);
#if 0
kmot_SetPoint(motor0, kMotRegPosProfile, tgtmin0);
kmot_SetPoint(motor1, kMotRegPosProfile, tgtmin1);
#else
kmot_SetPoint(motor0, kMotRegPos, tgtmin0);
kmot_SetPoint(motor1, kMotRegPos, tgtmin1);
#endif
#if 0
kmot_GetStatus(motor0,&status0,&erreur0);
kmot_GetStatus(motor1,&status1,&erreur1);
while( ! ((status0 & 0x8) && (status1 & 0x8)))
{
kmot_GetStatus(motor0,&status0,&erreur0);
kmot_GetStatus(motor1,&status1,&erreur1);
}
#else
pos0 = kmot_GetMeasure(motor0,kMotMesPos);
pos1 = kmot_GetMeasure(motor1,kMotMesPos);
while( abs(pos0 - tgtmin0) > MARGIN || abs(pos1 - tgtmin1) > MARGIN)
{
pos0 = kmot_GetMeasure(motor0,kMotMesPos);
pos1 = kmot_GetMeasure(motor1,kMotMesPos);
}
#endif
kmot_SetMode(motor0,2);
kmot_SetMode(motor1,2);
usleep(100000);
printf("%d: set pos: %ld,%ld\n\r",counter, tgtmax0,tgtmax1);
#if 0
kmot_SetPoint(motor0, kMotRegPosProfile, tgtmax0);
kmot_SetPoint(motor1, kMotRegPosProfile, tgtmax1);
#else
kmot_SetPoint(motor0, kMotRegPos, tgtmax0);
kmot_SetPoint(motor1, kMotRegPos, tgtmax1);
#endif
#if 0
kmot_GetStatus(motor0,&status0,&erreur0);
kmot_GetStatus(motor1,&status1,&erreur1);
while( ! ((status0 & 0x8) && (status1 & 0x8)))
{
kmot_GetStatus(motor0,&status0,&erreur0);
kmot_GetStatus(motor1,&status1,&erreur1);
}
#else
pos0 = kmot_GetMeasure(motor0,kMotMesPos);
pos1 = kmot_GetMeasure(motor1,kMotMesPos);
while( abs(pos0 - tgtmax0) > MARGIN || abs(pos1 - tgtmax1) > MARGIN)
{
pos0 = kmot_GetMeasure(motor0,kMotMesPos);
pos1 = kmot_GetMeasure(motor1,kMotMesPos);
}
#endif
kmot_SetMode(motor0,2);
kmot_SetMode(motor1,2);
counter--;
}
}
