コード例 #1
0
static void
lcp_dialin_proxy_open(void *ctx)
{
	lcp *_this;

	_this = ctx;
	_this->fsm.state = OPENED;
	lcp_open(&_this->fsm);
}
コード例 #2
0
ファイル: ppp.c プロジェクト: chenyifu/asp_tinet_mb
void
ppp_input_task(intptr_t exinf)
{
	T_NET_BUF	*input;
	T_PPP_PROTENT	*proto;
	ID		tskid;
	int_t		ix;

	/* ポートを初期設定する */
	syscall(serial_opn_por(HDLC_PORTID));
	syscall(serial_ctl_por(HDLC_PORTID, IOCTL_FCSND | IOCTL_FCRCV));

	get_tid(&tskid);

#ifdef PPP_CFG_MODEM

	init_modem();
	syslog(LOG_NOTICE, "[PPP INPUT:%d] started with modem on port %d.", tskid, HDLC_PORTID);

#else	/* of #ifdef PPP_CFG_MODEM */

	syslog(LOG_NOTICE, "[PPP INPUT:%d] started on port %d.", tskid, HDLC_PORTID);

#endif	/* of #ifdef PPP_CFG_MODEM */

	/* ネットワークタイマタスクを起動する */
	syscall(act_tsk(NET_TIMER_TASK));

	/* 上位プロトコルを初期化する */
	for (ix = 0; (proto = protocols[ix]) != NULL; ix ++)
		if (proto->init != NULL)
			(*proto->init)();

	lcp_lowerup();
	lcp_open(PPP_OPEN_PASSIVE);

	/* PPP 出力タスクを起動する */
	syscall(act_tsk(PPP_OUTPUT_TASK));

	while (true) {
		if (tget_net_buf(&input, IF_PDU_SIZE, TMO_PPP_GET_NET_BUF) == E_OK) {
			while (HDLC_read(input, IF_PDU_SIZE) != E_OK)
				;
			if (input->len > 0) {

	#ifdef PPP_IDLE_TIMEOUT
				wai_sem(SEM_IDLE_TIMEOUT);
				if (idle && ntohs(*GET_PPP_HDR(input)) != PPP_LCP) {
					untimeout((FP)idle_timeout, NULL);
					idle = false;
					}
				sig_sem(SEM_IDLE_TIMEOUT);
	#endif	/* of #ifdef PPP_IDLE_TIMEOUT */

				parse_input(input);
				}
			else
				syscall(rel_net_buf(input));

	#ifdef PPP_IDLE_TIMEOUT
			wai_sem(SEM_IDLE_TIMEOUT);
			if (!idle && ppp_phase == PPP_PHASE_NETWORK) {
				timeout((FP)idle_timeout, NULL, PPP_IDLE_TIMEOUT);
				idle = true;
				}
			else if (idle && ppp_phase != PPP_PHASE_NETWORK) {
				untimeout((FP)idle_timeout, NULL);
				idle = false;
				}
			sig_sem(SEM_IDLE_TIMEOUT);
	#endif	/* of #ifdef PPP_IDLE_TIMEOUT */

			}
		else {
			HDLC_dummy_read();
			NET_COUNT_PPP(net_count_ppp.in_err_packets, 1);
			NET_COUNT_PPP(net_count_ppp_no_bufs, 1);
			}
		}
	}
コード例 #3
0
ファイル: pppd.c プロジェクト: Palantir555/ecos-mars-zx3
externC void
cyg_pppd_main(CYG_ADDRWORD arg)
{
    int i;
    struct timeval timo;
    struct protent *protp;
    int connect_attempts = 0;

    phase = PHASE_INITIALIZE;

    cyg_ppp_options_install( ((struct tty *)arg)->options );

    for (i = 0; (protp = protocols[i]) != NULL; ++i)
        (*protp->init)(0);

    if (!ppp_available()) {
	option_error(no_ppp_msg);
	exit(1);
    }
    
    /*
     * Initialize system-dependent stuff and magic number package.
     */
    sys_init();
    magic_init();
    if (debug)
	setlogmask(LOG_UPTO(LOG_DEBUG));

   
    for (;;) {

	need_holdoff = 1;

        {
            Cyg_ErrNo err;
            while ((err = cyg_io_lookup(devnam, &tty_handle)) < 0) {
                if (err != 0)
                    syslog(LOG_ERR, "Failed to open %s: %d", devnam,err);
            }

#ifdef CYGOPT_IO_SERIAL_SUPPORT_LINE_STATUS
            if( modem )
            {
                cyg_uint32 len = sizeof(ppp_tty.serial_callbacks);
                ppp_tty.serial_callbacks.fn = cyg_ppp_serial_callback;
                ppp_tty.serial_callbacks.priv = (CYG_ADDRWORD)&ppp_tty;

                
                err = cyg_io_set_config( tty_handle,
                                         CYG_IO_SET_CONFIG_SERIAL_STATUS_CALLBACK,
                                         &ppp_tty.serial_callbacks,
                                         &len);

                if( err != 0 ) {
                    syslog(LOG_ERR, "cyg_io_set_config(serial callbacks): %d",err);
                    die(1);
                }

            }
#endif
        }

	hungup = 0;
	kill_link = 0;

	/* set line speed, flow control, etc.; clear CLOCAL if modem option */
	set_up_tty(tty_handle, 0);

#ifdef CYGPKG_PPP_CHAT          
        if( script != NULL )
        {
            if( !cyg_ppp_chat( devnam, script ) )
            {
                connect_attempts++;
                goto fail;
            }
        }
#endif

#ifdef CYGOPT_IO_SERIAL_SUPPORT_LINE_STATUS
        if( modem )
        {
            while( !ppp_tty.carrier_detected )
                cyg_thread_delay(100);
        }
#endif
        
	connect_attempts = 0;	/* we made it through ok */

	/* set up the serial device as a ppp interface */
	establish_ppp(tty_handle);

        syslog(LOG_INFO, "Using interface ppp%d", ifunit);
        (void) sprintf(ifname, "ppp%d", ifunit);
        
	/*
	 * Start opening the connection and wait for
	 * incoming events (reply, timeout, etc.).
	 */
	syslog(LOG_NOTICE, "Connect: %s <--> %s", ifname, devnam);
	stime = time((time_t *) NULL);
        
	lcp_lowerup(0);
	lcp_open(0);		/* Start protocol */
	for (phase = PHASE_ESTABLISH; phase != PHASE_DEAD; ) {
	    wait_input(timeleft(&timo));
	    calltimeout();
	    get_input();
	    if (kill_link) {
		lcp_close(0, "User request");
		kill_link = 0;
	    }
	    if (open_ccp_flag) {
		if (phase == PHASE_NETWORK) {
		    ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
		    (*ccp_protent.open)(0);
		}
		open_ccp_flag = 0;
	    }
	}

	clean_check();
	disestablish_ppp(tty_handle);

#ifdef CYGPKG_PPP_CHAT          
    fail:        
#endif
	if (tty_handle != 0)
	    close_tty();
        
	/* limit to retries? */
	if (max_con_attempts)
	    if (connect_attempts >= max_con_attempts)
		break;

	if (!persist)
	    die(1);

#if 0
	if (holdoff > 0 && need_holdoff) {
	    phase = PHASE_HOLDOFF;
	    TIMEOUT(holdoff_end, NULL, holdoff);
	    do {
		wait_time(timeleft(&timo));
		calltimeout();
		if (kill_link) {
		    if (!persist)
			die(0);
		    kill_link = 0;
		    phase = PHASE_DORMANT; /* allow signal to end holdoff */
		}

	    } while (phase == PHASE_HOLDOFF);
	}
#endif
        
    }

    die(0);
}
コード例 #4
0
ファイル: main.c プロジェクト: mihaicarabas/dragonfly
int
main(int argc, char *argv[])
{
    int i, n, fdflags;
    struct sigaction sa;
    FILE *iffile;
    char *p;
    struct passwd *pw;
    struct timeval timo;
    sigset_t mask;
    struct protent *protp;
    struct stat statbuf;
    int connect_attempts = 0;
    char numbuf[16];

    phase = PHASE_INITIALIZE;
    p = ttyname(0);
    if (p)
	strcpy(devnam, p);
    strcpy(default_devnam, devnam);

    script_env = NULL;

    /* Initialize syslog facilities */
#ifdef ULTRIX
    openlog("pppd", LOG_PID);
#else
    openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
    setlogmask(LOG_UPTO(LOG_INFO));
#endif

    if (gethostname(hostname, MAXNAMELEN) < 0 ) {
	option_error("Couldn't get hostname: %m");
	die(1);
    }
    hostname[MAXNAMELEN-1] = 0;

    uid = getuid();
    privileged = uid == 0;
    sprintf(numbuf, "%d", uid);
    script_setenv("UID", numbuf);

    /*
     * Initialize to the standard option set, then parse, in order,
     * the system options file, the user's options file,
     * the tty's options file, and the command line arguments.
     */
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
        (*protp->init)(0);

    progname = *argv;

    if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
	|| !options_from_user())
	exit(1);
    scan_args(argc-1, argv+1);	/* look for tty name on command line */
    if (!options_for_tty()
	|| !parse_args(argc-1, argv+1))
	exit(1);

    /*
     * Check that we are running as root.
     */
    if (geteuid() != 0) {
	option_error("must be root to run %s, since it is not setuid-root",
		     argv[0]);
	die(1);
    }

    if (!ppp_available()) {
	option_error(no_ppp_msg);
	exit(1);
    }

    /*
     * Check that the options given are valid and consistent.
     */
    sys_check_options();
    auth_check_options();
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
	if (protp->check_options != NULL)
	    (*protp->check_options)();
    if (demand && connector == 0) {
	option_error("connect script required for demand-dialling\n");
	exit(1);
    }

    script_setenv("DEVICE", devnam);
    sprintf(numbuf, "%d", baud_rate);
    script_setenv("SPEED", numbuf);

    /*
     * If the user has specified the default device name explicitly,
     * pretend they hadn't.
     */
    if (!default_device && strcmp(devnam, default_devnam) == 0)
	default_device = 1;
    if (default_device)
	nodetach = 1;

    /*
     * Initialize system-dependent stuff and magic number package.
     */
    sys_init();
    magic_init();
    if (debug)
	setlogmask(LOG_UPTO(LOG_DEBUG));

    /*
     * Detach ourselves from the terminal, if required,
     * and identify who is running us.
     */
    if (nodetach == 0)
	detach();
    pid = getpid();
    p = getlogin();
    stime = time(NULL);
    if (p == NULL) {
	pw = getpwuid(uid);
	if (pw != NULL && pw->pw_name != NULL)
	    p = pw->pw_name;
	else
	    p = "(unknown)";
    }
    syslog(LOG_NOTICE, "pppd %s.%d%s started by %s, uid %d",
	   VERSION, PATCHLEVEL, IMPLEMENTATION, p, uid);
  
    /*
     * Compute mask of all interesting signals and install signal handlers
     * for each.  Only one signal handler may be active at a time.  Therefore,
     * all other signals should be masked when any handler is executing.
     */
    sigemptyset(&mask);
    sigaddset(&mask, SIGHUP);
    sigaddset(&mask, SIGINT);
    sigaddset(&mask, SIGTERM);
    sigaddset(&mask, SIGCHLD);

#define SIGNAL(s, handler)	{ \
	sa.sa_handler = handler; \
	if (sigaction(s, &sa, NULL) < 0) { \
	    syslog(LOG_ERR, "Couldn't establish signal handler (%d): %m", s); \
	    die(1); \
	} \
    }

    sa.sa_mask = mask;
    sa.sa_flags = 0;
    SIGNAL(SIGHUP, hup);		/* Hangup */
    SIGNAL(SIGINT, term);		/* Interrupt */
    SIGNAL(SIGTERM, term);		/* Terminate */
    SIGNAL(SIGCHLD, chld);

    SIGNAL(SIGUSR1, toggle_debug);	/* Toggle debug flag */
    SIGNAL(SIGUSR2, open_ccp);		/* Reopen CCP */

    /*
     * Install a handler for other signals which would otherwise
     * cause pppd to exit without cleaning up.
     */
    SIGNAL(SIGABRT, bad_signal);
    SIGNAL(SIGALRM, bad_signal);
    SIGNAL(SIGFPE, bad_signal);
    SIGNAL(SIGILL, bad_signal);
    SIGNAL(SIGPIPE, bad_signal);
    SIGNAL(SIGQUIT, bad_signal);
    SIGNAL(SIGSEGV, bad_signal);
#ifdef SIGBUS
    SIGNAL(SIGBUS, bad_signal);
#endif
#ifdef SIGEMT
    SIGNAL(SIGEMT, bad_signal);
#endif
#ifdef SIGPOLL
    SIGNAL(SIGPOLL, bad_signal);
#endif
#ifdef SIGPROF
    SIGNAL(SIGPROF, bad_signal);
#endif
#ifdef SIGSYS
    SIGNAL(SIGSYS, bad_signal);
#endif
#ifdef SIGTRAP
    SIGNAL(SIGTRAP, bad_signal);
#endif
#ifdef SIGVTALRM
    SIGNAL(SIGVTALRM, bad_signal);
#endif
#ifdef SIGXCPU
    SIGNAL(SIGXCPU, bad_signal);
#endif
#ifdef SIGXFSZ
    SIGNAL(SIGXFSZ, bad_signal);
#endif

    /*
     * Apparently we can get a SIGPIPE when we call syslog, if
     * syslogd has died and been restarted.  Ignoring it seems
     * be sufficient.
     */
    signal(SIGPIPE, SIG_IGN);

    /*
     * If we're doing dial-on-demand, set up the interface now.
     */
    if (demand) {
	/*
	 * Open the loopback channel and set it up to be the ppp interface.
	 */
	open_ppp_loopback();

	syslog(LOG_INFO, "Using interface ppp%d", ifunit);
	sprintf(ifname, "ppp%d", ifunit);
	script_setenv("IFNAME", ifname);

	create_pidfile();	/* write pid to file */

	/*
	 * Configure the interface and mark it up, etc.
	 */
	demand_conf();
    }

    for (;;) {

	need_holdoff = 1;

	if (demand) {
	    /*
	     * Don't do anything until we see some activity.
	     */
	    phase = PHASE_DORMANT;
	    kill_link = 0;
	    demand_unblock();
	    for (;;) {
		wait_loop_output(timeleft(&timo));
		calltimeout();
		if (kill_link) {
		    if (!persist)
			die(0);
		    kill_link = 0;
		}
		if (get_loop_output())
		    break;
		reap_kids();
	    }

	    /*
	     * Now we want to bring up the link.
	     */
	    demand_block();
	    syslog(LOG_INFO, "Starting link");
	}

	/*
	 * Lock the device if we've been asked to.
	 */
	if (lockflag && !default_device) {
	    if (lock(devnam) < 0)
		goto fail;
	    locked = 1;
	}

	/*
	 * Open the serial device and set it up to be the ppp interface.
	 * First we open it in non-blocking mode so we can set the
	 * various termios flags appropriately.  If we aren't dialling
	 * out and we want to use the modem lines, we reopen it later
	 * in order to wait for the carrier detect signal from the modem.
	 */
	while ((ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0)) < 0) {
	    if (errno != EINTR)
		syslog(LOG_ERR, "Failed to open %s: %m", devnam);
	    if (!persist || errno != EINTR)
		goto fail;
	}
	if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
	    || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
	    syslog(LOG_WARNING,
		   "Couldn't reset non-blocking mode on device: %m");

	hungup = 0;
	kill_link = 0;

	/*
	 * Do the equivalent of `mesg n' to stop broadcast messages.
	 */
	if (fstat(ttyfd, &statbuf) < 0
	    || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
	    syslog(LOG_WARNING,
		   "Couldn't restrict write permissions to %s: %m", devnam);
	} else
	    tty_mode = statbuf.st_mode;

	/* run connection script */
	if (connector && connector[0]) {
	    MAINDEBUG((LOG_INFO, "Connecting with <%s>", connector));

	    /*
	     * Set line speed, flow control, etc.
	     * On most systems we set CLOCAL for now so that we can talk
	     * to the modem before carrier comes up.  But this has the
	     * side effect that we might miss it if CD drops before we
	     * get to clear CLOCAL below.  On systems where we can talk
	     * successfully to the modem with CLOCAL clear and CD down,
	     * we can clear CLOCAL at this point.
	     */
	    set_up_tty(ttyfd, 1);

	    /* drop dtr to hang up in case modem is off hook */
	    if (!default_device && modem) {
		setdtr(ttyfd, FALSE);
		sleep(1);
		setdtr(ttyfd, TRUE);
	    }

	    if (device_script(connector, ttyfd, ttyfd) < 0) {
		syslog(LOG_ERR, "Connect script failed");
		setdtr(ttyfd, FALSE);
		connect_attempts++;
		goto fail;
	    }


	    syslog(LOG_INFO, "Serial connection established.");
	    sleep(1);		/* give it time to set up its terminal */
	}

	connect_attempts = 0;	/* we made it through ok */

	/* set line speed, flow control, etc.; clear CLOCAL if modem option */
	set_up_tty(ttyfd, 0);

	/* reopen tty if necessary to wait for carrier */
	if (connector == NULL && modem) {
	    while ((i = open(devnam, O_RDWR)) < 0) {
		if (errno != EINTR)
		    syslog(LOG_ERR, "Failed to reopen %s: %m", devnam);
		if (!persist || errno != EINTR ||
			hungup || kill_link)
		    goto fail;
	    }
	    close(i);
	}

	/* run welcome script, if any */
	if (welcomer && welcomer[0]) {
	    if (device_script(welcomer, ttyfd, ttyfd) < 0)
		syslog(LOG_WARNING, "Welcome script failed");
	}

	/* set up the serial device as a ppp interface */
	establish_ppp(ttyfd);

	if (!demand) {
	    
	    syslog(LOG_INFO, "Using interface ppp%d", ifunit);
	    sprintf(ifname, "ppp%d", ifunit);
	    
	    create_pidfile();	/* write pid to file */

	    /* write interface unit number to file */
	    for (n = strlen(devnam); n > 0 ; n--)
		    if (devnam[n] == '/') { 
			    n++;
			    break;
		    }
	    sprintf(iffilename, "%s%s.if", _PATH_VARRUN, &devnam[n]);
	    if ((iffile = fopen(iffilename, "w")) != NULL) {
		fprintf(iffile, "ppp%d\n", ifunit);
		fclose(iffile);
	    } else {
		syslog(LOG_ERR, "Failed to create if file %s: %m", iffilename);
		iffilename[0] = 0;
	    }

	    script_setenv("IFNAME", ifname);
	}

	/*
	 * Start opening the connection and wait for
	 * incoming events (reply, timeout, etc.).
	 */
	syslog(LOG_NOTICE, "Connect: %s <--> %s", ifname, devnam);
	stime = time(NULL);
	lcp_lowerup(0);
	lcp_open(0);		/* Start protocol */
	for (phase = PHASE_ESTABLISH; phase != PHASE_DEAD; ) {
	    wait_input(timeleft(&timo));
	    calltimeout();
	    get_input();
	    if (kill_link) {
		lcp_close(0, "User request");
		kill_link = 0;
	    }
	    if (open_ccp_flag) {
		if (phase == PHASE_NETWORK) {
		    ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
		    (*ccp_protent.open)(0);
		}
		open_ccp_flag = 0;
	    }
	    reap_kids();	/* Don't leave dead kids lying around */
	}

	/*
	 * If we may want to bring the link up again, transfer
	 * the ppp unit back to the loopback.  Set the
	 * real serial device back to its normal mode of operation.
	 */
	clean_check();
	if (demand)
	    restore_loop();
	disestablish_ppp(ttyfd);

	/*
	 * Run disconnector script, if requested.
	 * XXX we may not be able to do this if the line has hung up!
	 */
	if (disconnector && !hungup) {
	    set_up_tty(ttyfd, 1);
	    if (device_script(disconnector, ttyfd, ttyfd) < 0) {
		syslog(LOG_WARNING, "disconnect script failed");
	    } else {
		syslog(LOG_INFO, "Serial link disconnected.");
	    }
	}

    fail:
	if (ttyfd >= 0)
	    close_tty();
	if (locked) {
	    unlock();
	    locked = 0;
	}

	if (!demand) {
	    if (pidfilename[0] != 0
		&& unlink(pidfilename) < 0 && errno != ENOENT) 
		syslog(LOG_WARNING, "unable to delete pid file: %m");
	    pidfilename[0] = 0;

	    if (iffile)
		    if (unlink(iffilename) < 0 && errno != ENOENT) 
			    syslog(LOG_WARNING, "unable to delete if file: %m");
	    iffilename[0] = 0;
	}

	/* limit to retries? */
	if (max_con_attempts)
	    if (connect_attempts >= max_con_attempts)
		break;

	if (!persist)
	    die(1);

	if (demand)
	    demand_discard();
	if (holdoff > 0 && need_holdoff) {
	    phase = PHASE_HOLDOFF;
	    TIMEOUT(holdoff_end, NULL, holdoff);
	    do {
		wait_time(timeleft(&timo));
		calltimeout();
		if (kill_link) {
		    if (!persist)
			die(0);
		    kill_link = 0;
		    phase = PHASE_DORMANT; /* allow signal to end holdoff */
		}
		reap_kids();
	    } while (phase == PHASE_HOLDOFF);
	}
    }

    die(0);
    return 0;
}
コード例 #5
0
ファイル: rtemsmain.c プロジェクト: imgtec/rtems-kbuild
int
pppdmain(
    int argc,
    char *argv[])
{
    int i, fdflags, t;
    char *connector;
    struct timeval timo;
    struct protent *protp;

    new_phase(PHASE_INITIALIZE);

    script_env = NULL;
    hostname[MAXNAMELEN-1] = 0;
    privileged = 1;
    privileged_option = 1;

    /*
     * Initialize magic number generator now so that protocols may
     * use magic numbers in initialization.
     */
    magic_init();

#ifdef XXX_XXX
    /* moved code the the rtems_pppd_reset_options function */

    /*
     * Initialize to the standard option set, then parse, in order,
     * the system options file, the user's options file,
     * the tty's options file, and the command line arguments.
     */
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
        (*protp->init)(0);
#endif


    if (!ppp_available()) {
	option_error(no_ppp_msg);
	return(EXIT_NO_KERNEL_SUPPORT);
    }

    /*
     * Check that the options given are valid and consistent.
     */
    if (!sys_check_options()) {
	return(EXIT_OPTION_ERROR);
    }
    if (!auth_check_options()) {
	return(EXIT_OPTION_ERROR);
    }
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
	if (protp->check_options != NULL)
	    (*protp->check_options)();

    /* default holdoff to 0 if no connect script has been given */
    if (connect_script == 0 && !holdoff_specified)
	holdoff = 0;

    if (default_device)
	nodetach = 1;

    /*
     * Initialize system-dependent stuff.
     */
    sys_init();
    /* if (debug)
	setlogmask(LOG_UPTO(LOG_DEBUG));
    */

    do_callback = 0;
    for (;;) {

	need_holdoff = 1;
	pppd_ttyfd = -1;
	real_ttyfd = -1;
	pppd_status = EXIT_OK;
	++unsuccess;
	doing_callback = do_callback;
	do_callback = 0;

	new_phase(PHASE_SERIALCONN);

	/*
	 * Get a pty master/slave pair if the pty, notty, or record
	 * options were specified.
	 */
	strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
	pty_master = -1;
	pty_slave = -1;

	/*
	 * Open the serial device and set it up to be the ppp interface.
	 * First we open it in non-blocking mode so we can set the
	 * various termios flags appropriately.  If we aren't dialling
	 * out and we want to use the modem lines, we reopen it later
	 * in order to wait for the carrier detect signal from the modem.
	 */
	hungup = 0;
	pppd_kill_link = 0;
	connector = doing_callback? callback_script: connect_script;
	if (devnam[0] != 0) {
	    for (;;) {
		/* If the user specified the device name, become the
		   user before opening it. */
		int err;
		pppd_ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
		err = errno;
		if (pppd_ttyfd >= 0) {
		    break;
		}
		errno = err;
		if (err != EINTR) {
		    error("Failed to open %s: %m", devnam);
		    pppd_status = EXIT_OPEN_FAILED;
		}
		if (!persist || err != EINTR)
		    goto fail;
	    }
	    if ((fdflags = fcntl(pppd_ttyfd, F_GETFL)) == -1
		|| fcntl(pppd_ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
		warn("Couldn't reset non-blocking mode on device: %m");

	    /*
	     * Set line speed, flow control, etc.
	     * If we have a non-null connection or initializer script,
	     * on most systems we set CLOCAL for now so that we can talk
	     * to the modem before carrier comes up.  But this has the
	     * side effect that we might miss it if CD drops before we
	     * get to clear CLOCAL below.  On systems where we can talk
	     * successfully to the modem with CLOCAL clear and CD down,
	     * we could clear CLOCAL at this point.
	     */
	    set_up_tty(pppd_ttyfd, ((connector != NULL && connector[0] != 0)
			       || initializer != NULL));
	    real_ttyfd = pppd_ttyfd;
	}

	/* run connection script */
	if ((connector && connector[0]) || initializer) {
	    if (real_ttyfd != -1) {
		/* XXX do this if doing_callback == CALLBACK_DIALIN? */
		if (!default_device && modem) {
		    setdtr(real_ttyfd, 0);	/* in case modem is off hook */
		    sleep(1);
		    setdtr(real_ttyfd, 1);
		}
	    }

	    if (initializer && initializer[0]) {
		if (device_script(pppd_ttyfd, DIALER_INIT, initializer) < 0) {
		    error("Initializer script failed");
		    pppd_status = EXIT_INIT_FAILED;
		    goto fail;
		}
		if (pppd_kill_link)
		    goto disconnect;

		info("Serial port initialized.");
	    }

	    if (connector && connector[0]) {
		if (device_script(pppd_ttyfd, DIALER_CONNECT, connector) < 0) {
		    error("Connect script failed");
		    pppd_status = EXIT_CONNECT_FAILED;
		    goto fail;
		}
		if (pppd_kill_link)
		    goto disconnect;

		info("Serial connection established.");
	    }

	    /* set line speed, flow control, etc.;
	       clear CLOCAL if modem option */
	    if (real_ttyfd != -1)
		set_up_tty(real_ttyfd, 0);

	    if (doing_callback == CALLBACK_DIALIN)
		connector = NULL;
	}

	/* reopen tty if necessary to wait for carrier */
	if (connector == NULL && modem && devnam[0] != 0) {
	    for (;;) {
		if ((i = open(devnam, O_RDWR)) >= 0)
		    break;
		if (errno != EINTR) {
		    error("Failed to reopen %s: %m", devnam);
		    pppd_status = EXIT_OPEN_FAILED;
		}
		if (!persist || errno != EINTR || hungup || pppd_kill_link)
		    goto fail;
	    }
	    close(i);
	}

        info("Serial connection established.");
        sleep(1);

	/* run welcome script, if any */
	if (welcomer && welcomer[0]) {
	    if (device_script(pppd_ttyfd, DIALER_WELCOME, welcomer) < 0)
		warn("Welcome script failed");
	}

	/* set up the serial device as a ppp interface */
	fd_ppp = establish_ppp(pppd_ttyfd);
	if (fd_ppp < 0) {
	    pppd_status = EXIT_FATAL_ERROR;
	    goto disconnect;
	}

	if (!demand) {
	    info("Using interface ppp%d", pppifunit);
	    slprintf(ifname, sizeof(ifname), "ppp%d", pppifunit);
	}

	/*
	 * Start opening the connection and wait for
	 * incoming events (reply, timeout, etc.).
	 */
	notice("Connect: %s <--> %s", ifname, ppp_devnam);
	gettimeofday(&start_time, NULL);

	lcp_lowerup(0);
	lcp_open(0);		/* Start protocol */

	open_ccp_flag = 0;
	pppd_status = EXIT_NEGOTIATION_FAILED;
	new_phase(PHASE_ESTABLISH);
	while (pppd_phase != PHASE_DEAD) {
   	    wait_input(timeleft(&timo));
	    calltimeout();
            get_input();

	    if (pppd_kill_link) {
		lcp_close(0, "User request");
		pppd_kill_link = 0;
	    }
	    if (open_ccp_flag) {
		if (pppd_phase == PHASE_NETWORK || pppd_phase == PHASE_RUNNING) {
		    ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
		    (*ccp_protent.open)(0);
		}
		open_ccp_flag = 0;
	    }
	}

	/*
	 * If we may want to bring the link up again, transfer
	 * the ppp unit back to the loopback.  Set the
	 * real serial device back to its normal mode of operation.
	 */
	clean_check();
	if (demand)
	    restore_loop();
	disestablish_ppp(pppd_ttyfd);
	fd_ppp = -1;
	if (!hungup)
	    lcp_lowerdown(0);

	/*
	 * Run disconnector script, if requested.
	 * XXX we may not be able to do this if the line has hung up!
	 */
    disconnect:
	if (disconnect_script && !hungup) {
	    new_phase(PHASE_DISCONNECT);
	    if (real_ttyfd >= 0)
		set_up_tty(real_ttyfd, 1);
	    if (device_script(pppd_ttyfd, DIALER_DISCONNECT, disconnect_script) < 0) {
		warn("disconnect script failed");
	    } else {
		info("Serial link disconnected.");
	    }
	}

    fail:
	if (pty_master >= 0)
	    close(pty_master);
	if (pty_slave >= 0)
	    close(pty_slave);
	if (real_ttyfd >= 0)
	    close_tty();

	if (!persist || (maxfail > 0 && unsuccess >= maxfail))
	    break;

	pppd_kill_link = 0;
	if (demand)
	    demand_discard();
	t = need_holdoff? holdoff: 0;
	if (holdoff_hook)
	    t = (*holdoff_hook)();
	if (t > 0) {
	    new_phase(PHASE_HOLDOFF);
	    TIMEOUT(holdoff_end, NULL, t);
	    do {
   	        wait_input(timeleft(&timo));

		calltimeout();
		if (pppd_kill_link) {
		    pppd_kill_link = 0;
		    new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
		}
	    } while (pppd_phase == PHASE_HOLDOFF);
	    if (!persist)
		break;
	}
    }

    die(pppd_status);
    return pppd_status;
}