void KICAD_MANAGER_FRAME::CreateNewProject( const wxFileName& aProjectFileName )
{
wxCHECK_RET( aProjectFileName.DirExists() && aProjectFileName.IsDirWritable(),
"Project folder must exist and be writable to create a new project." );
// Init project filename. This clears all elements from the project object.
SetProjectFileName( aProjectFileName.GetFullPath() );
// Copy kicad.pro file from template folder.
if( !aProjectFileName.FileExists() )
{
wxString srcFileName = sys_search().FindValidPath( "kicad.pro" );
// Create a minimal project (.pro) file if the template project file could not be copied.
if( !wxFileName::FileExists( srcFileName )
|| !wxCopyFile( srcFileName, aProjectFileName.GetFullPath() ) )
{
Prj().ConfigSave( PgmTop().SysSearch(), GeneralGroupName, s_KicadManagerParams );
}
}
// Ensure a "stub" for a schematic root sheet and a board exist.
// It will avoid messages from the schematic editor or the board editor to create a new file
// And forces the user to create main files under the right name for the project manager
wxFileName fn( aProjectFileName.GetFullPath() );
fn.SetExt( SchematicFileExtension );
// If a <project>.sch file does not exist, create a "stub" file ( minimal schematic file )
if( !fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "EESchema Schematic File Version 2\n"
"EELAYER 25 0\nEELAYER END\n$EndSCHEMATC\n" ) );
// wxFile dtor will close the file
}
// If a <project>.kicad_pcb or <project>.brd file does not exist,
// create a .kicad_pcb "stub" file
fn.SetExt( KiCadPcbFileExtension );
wxFileName leg_fn( fn );
leg_fn.SetExt( LegacyPcbFileExtension );
if( !fn.FileExists() && !leg_fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "(kicad_pcb (version 4) (host kicad \"dummy file\") )\n" ) );
// wxFile dtor will close the file
}
}
void KICAD_MANAGER_FRAME::CreateNewProject( const wxString& aPrjFullFileName,
bool aTemplateSelector = false )
{
wxFileName newProjectName = aPrjFullFileName;
wxChar sep[2] = { SEP(), 0 }; // nul terminated separator wxChar string.
ClearMsg();
// If we are creating a project from a template, make sure the template directory is sane
if( aTemplateSelector )
{
DIALOG_TEMPLATE_SELECTOR* ps = new DIALOG_TEMPLATE_SELECTOR( this );
wxFileName templatePath;
wxString envStr;
#ifndef __WXMAC__
wxGetEnv( wxT( "KICAD" ), &envStr );
// Add a new tab for system templates
if( !envStr.empty() )
{
// user may or may not have including terminating separator.
if( !envStr.EndsWith( sep ) )
envStr += sep;
templatePath = envStr + wxT( "template" ) + sep;
}
else
{
// The standard path should be in the share directory for kicad. As
// it is normal on Windows to only have the share directory and not
// the kicad sub-directory we fall back to that if the directory
// doesn't exist
templatePath = wxPathOnly( wxStandardPaths::Get().GetExecutablePath() ) +
sep + wxT( ".." ) + sep + wxT( "share" ) + sep + wxT( "kicad" ) +
sep + wxT( "template" ) + sep;
if( !wxDirExists( templatePath.GetFullPath() ) )
{
templatePath = wxPathOnly( wxStandardPaths::Get().GetExecutablePath() ) +
sep + wxT( ".." ) + sep + wxT( "share" ) + sep + wxT( "template" ) + sep;
}
}
#else
// Use what is provided in the bundle data dir
templatePath = GetOSXKicadDataDir() + sep + wxT( "template" );
#endif
ps->AddTemplatesPage( _( "System Templates" ), templatePath );
// Add a new tab for user templates
wxFileName userPath = wxStandardPaths::Get().GetDocumentsDir() +
sep + wxT( "kicad" ) + sep + wxT( "template" ) + sep;
ps->AddTemplatesPage( _( "User Templates" ), userPath );
// Check to see if a custom template location is available and setup a
// new selection tab if there is.
envStr.clear();
wxGetEnv( wxT( "KICAD_PTEMPLATES" ), &envStr );
if( !envStr.empty() )
{
if( !envStr.EndsWith( sep ) )
envStr += sep;
wxFileName envPath = envStr;
ps->AddTemplatesPage( _( "Portable Templates" ), envPath );
}
// Show the project template selector dialog
int result = ps->ShowModal();
if( ( result != wxID_OK ) || ( ps->GetSelectedTemplate() == NULL ) )
{
if( ps->GetSelectedTemplate() == NULL )
{
wxMessageBox( _( "No project template was selected. Cannot generate new "
"project." ),
_( "Error" ),
wxOK | wxICON_ERROR,
this );
}
}
else
{
// The selected template widget contains the template we're attempting to use to
// create a project
if( !ps->GetSelectedTemplate()->CreateProject( newProjectName ) )
{
wxMessageBox( _( "Problem whilst creating new project from template!" ),
_( "Template Error" ),
wxOK | wxICON_ERROR,
this );
}
}
}
// Init project filename
SetProjectFileName( newProjectName.GetFullPath() );
// Write settings to project file
// was: wxGetApp().WriteProjectConfig( aPrjFullFileName, GeneralGroupName, s_KicadManagerParams );
Prj().ConfigSave( Pgm().SysSearch(), GeneralGroupName, s_KicadManagerParams );
// Ensure a "stub" for a schematic root sheet and a board exist.
// It will avoid messages from the schematic editor or the board editor to create a new file
// And forces the user to create main files under the right name for the project manager
wxFileName fn( newProjectName.GetFullPath() );
fn.SetExt( SchematicFileExtension );
// If a <project>.sch file does not exist, create a "stub" file
if( !fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "EESchema Schematic File Version 2\n" ) );
// wxFile dtor will close the file
}
// If a <project>.kicad_pcb or <project>.brd file does not exist,
// create a .kicad_pcb "stub" file
fn.SetExt( KiCadPcbFileExtension );
wxFileName leg_fn( fn );
leg_fn.SetExt( LegacyPcbFileExtension );
if( !fn.FileExists() && !leg_fn.FileExists() )
{
wxFile file( fn.GetFullPath(), wxFile::write );
if( file.IsOpened() )
file.Write( wxT( "(kicad_pcb (version 4) (host kicad \"dummy file\") )\n" ) );
// wxFile dtor will close the file
}
// Enable the toolbar and menubar buttons and clear the help text.
m_active_project = true;
m_MessagesBox->Clear();
}
