int main(int argc, char *argv[])
{
// Initialize location of Aria, Arnl and their args.
Aria::init();
Arnl::init();
// The robot object
ArRobot robot;
// Parse the command line arguments.
ArArgumentParser parser(&argc, argv);
// Read data_index if exists
int data_index;
bool exist_data_index;
parser.checkParameterArgumentInteger("dataIndex",&data_index,&exist_data_index);
// Load default arguments for this computer (from /etc/Aria.args, environment
// variables, and other places)
parser.loadDefaultArguments();
// Object that connects to the robot or simulator using program options
ArRobotConnector robotConnector(&parser, &robot);
// set up a gyro
ArAnalogGyro gyro(&robot);
ArLog::init(ArLog::File,ArLog::Normal,"run.log",false,true,true);
// Parse arguments for the simple connector.
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
ArLog::log(ArLog::Normal, "\nUsage: %s -map mapfilename\n", argv[0]);
Aria::logOptions();
Aria::exit(1);
}
// Collision avoidance actions at higher priority
ArActionAvoidFront avoidAction("avoid",200);
ArActionLimiterForwards limiterAction("speed limiter near", 150, 500, 150);
ArActionLimiterForwards limiterFarAction("speed limiter far", 300, 1100, 400);
ArActionLimiterTableSensor tableLimiterAction;
//robot.addAction(&tableLimiterAction, 100);
//robot.addAction(&avoidAction,100);
//robot.addAction(&limiterAction, 95);
//robot.addAction(&limiterFarAction, 90);
// Goto action at lower priority
ArActionGoto gotoPoseAction("goto");
//robot.addAction(&gotoPoseAction, 50);
gotoPoseAction.setCloseDist(750);
// Stop action at lower priority, so the robot stops if it has no goal
ArActionStop stopAction("stop");
//robot.addAction(&stopAction, 40);
// Connect the robot
if (!robotConnector.connectRobot())
{
ArLog::log(ArLog::Normal, "Could not connect to robot... exiting");
Aria::exit(3);
}
if(!robot.isConnected())
{
ArLog::log(ArLog::Terse, "Internal error: robot connector succeeded but ArRobot::isConnected() is false!");
}
// Connector for laser rangefinders
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
// Sonar, must be added to the robot, used by teleoperation and wander to
// detect obstacles, and for localization if SONARNL
ArSonarDevice sonarDev;
// Add the sonar to the robot
robot.addRangeDevice(&sonarDev);
// Start the robot thread.
robot.runAsync(true);
// Connect to the laser(s) if lasers were configured in this robot's parameter
// file or on the command line, and run laser processing thread if applicable
// for that laser class. For the purposes of this demo, add all
// possible lasers to ArRobot's list rather than just the ones that were
// connected by this call so when you enter laser mode, you
// can then interactively choose which laser to use from that list of all
// lasers mentioned in robot parameters and on command line. Normally,
// only connected lasers are put in ArRobot's list.
if (!laserConnector.connectLasers(
false, // continue after connection failures
true, // add only connected lasers to ArRobot
true // add all lasers to ArRobot
))
{
ArLog::log(ArLog::Normal ,"Could not connect to lasers... exiting\n");
Aria::exit(2);
}
// Puntero a laser
ArSick* sick=(ArSick*)robot.findLaser(1);
// Conectamos el laser
sick->asyncConnect();
//Esperamos a que esté encendido
while(!sick->isConnected())
{
ArUtil::sleep(100);
}
ArLog::log(ArLog::Normal ,"Laser conectado\n");
// Set up things so data can be logged (only do it with the laser
// since it can overrun a 9600 serial connection which the sonar is
// more likely to have)
ArDataLogger dataLogger(&robot);
dataLogger.addToConfig(Aria::getConfig());
// add our logging to the config
//ArLog::addToConfig(Aria::getConfig());
// Set up a class that'll put the movement and gyro parameters into ArConfig
ArRobotConfig robotConfig(&robot);
robotConfig.addAnalogGyro(&gyro);
// Add additional range devices to the robot and path planning task.
// IRs if the robot has them.
robot.lock();
ArIRs irs;
robot.addRangeDevice(&irs);
// Bumpers.
ArBumpers bumpers;
robot.addRangeDevice(&bumpers);
// cause the sonar to turn off automatically
// when the robot is stopped, and turn it back on when commands to move
// are sent. (Note, this should not be done if you need the sonar
// data to localize, or for other purposes while stopped)
ArSonarAutoDisabler sonarAutoDisabler(&robot);
// Read in parameter files.
Aria::getConfig()->useArgumentParser(&parser);
if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
{
ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
Aria::exit(5);
}
//Configuracion del laser
sick->setMinDistBetweenCurrent(0);
robot.enableMotors();
robot.setAbsoluteMaxTransVel(1000);
/* Finally, get ready to run the robot: */
robot.unlock();
Controlador driver(&robot);
if(exist_data_index){
driver.setDataIndex(data_index);
}
driver.runAsync();
ControlHandler handler(&driver,&robot);
// Use manual key handler
//handler.addKeyHandlers(&robot);
robot.addSensorInterpTask("ManualKeyHandler",50,handler.getFunctor());
ArLog::log(ArLog::Normal ,"Añadido manejador teclado\n");
// double x,y,dist,angle;
// ArPose punto;
// ArPose origen=robot.getPose();
// sick->lockDevice();
// for(int i=-90;i<90;i++){
// // Obtengo la medida de distancia y angulo
// dist=sick->currentReadingPolar(i,i+1,&angle);
// // Obtengo coordenadas del punto usando el laser como referencia
// x=dist*ArMath::cos(angle);
// y=dist*ArMath::sin(angle);
// //Roto los puntos
// ArMath::pointRotate(&x,&y,-origen.getTh());
// punto.setX(x);
// punto.setY(y);
// punto=punto + origen;
// printf("Medida: %d\t Angulo:%.2f\t Angulo:%.2f\t Distancia:%0.2f\t X:%0.2f\t Y:%0.2f\n",i,angle,angle+origen.getTh(),dist,punto.getX(),punto.getY());
// }
// printf("Medidas adquiridas\n");
// sick->unlockDevice();
robot.waitForRunExit();
//ArUtil::sleep(10000);
return 0;
}
int __cdecl _tmain (int argc, char** argv)
{
//------------ I N I C I O M A I N D E L P R O G R A M A D E L R O B O T-----------//
//inicializaion de variables
Aria::init();
ArArgumentParser parser(&argc, argv);
parser.loadDefaultArguments();
ArSimpleConnector simpleConnector(&parser);
ArRobot robot;
ArSonarDevice sonar;
ArAnalogGyro gyro(&robot);
robot.addRangeDevice(&sonar);
ActionGos go(500, 350);
robot.addAction(&go, 48);
ActionTurns turn(400, 110);
robot.addAction(&turn, 49);
ActionTurns turn2(400, 110);
robot.addAction(&turn2, 49);
// presionar tecla escape para salir del programa
ArKeyHandler keyHandler;
Aria::setKeyHandler(&keyHandler);
robot.attachKeyHandler(&keyHandler);
printf("Presionar ESC para salir\n");
// uso de sonares para evitar colisiones con las paredes u
// obstaculos grandes, mayores a 8cm de alto
ArActionLimiterForwards limiterAction("limitador velocidad cerca", 300, 600, 250);
ArActionLimiterForwards limiterFarAction("limitador velocidad lejos", 300, 1100, 400);
ArActionLimiterTableSensor tableLimiterAction;
robot.addAction(&tableLimiterAction, 100);
robot.addAction(&limiterAction, 95);
robot.addAction(&limiterFarAction, 90);
// Inicializon la funcion de goto
ArActionGoto gotoPoseAction("goto");
robot.addAction(&gotoPoseAction, 50);
// Finaliza el goto si es que no hace nada
ArActionStop stopAction("stop");
robot.addAction(&stopAction, 40);
// Parser del CLI
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
Aria::logOptions();
exit(1);
}
// Conexion del robot
if (!simpleConnector.connectRobot(&robot))
{
printf("Could not connect to robot... exiting\n");
Aria::exit(1);
}
robot.runAsync(true);
// enciende motores, apaga sonidos
robot.enableMotors();
robot.comInt(ArCommands::SOUNDTOG, 0);
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
const int duration = 100000; //msec
ArLog::log(ArLog::Normal, "Completados los puntos en %d segundos", duration/1000);
// ============================ INICIO CONFIG COM =================================//
CSerial serial;
LONG lLastError = ERROR_SUCCESS;
// Trata de abrir el com seleccionado
lLastError = serial.Open(_T("COM3"),0,0,false);
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Imposible abrir el COM"));
// Inicia el puerto serial (9600,8N1)
lLastError = serial.Setup(CSerial::EBaud9600,CSerial::EData8,CSerial::EParNone,CSerial::EStop1);
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Imposible setear la config del COM"));
// Register only for the receive event
lLastError = serial.SetMask(CSerial::EEventBreak |
CSerial::EEventCTS |
CSerial::EEventDSR |
CSerial::EEventError |
CSerial::EEventRing |
CSerial::EEventRLSD |
CSerial::EEventRecv);
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port event mask"));
// Use 'non-blocking' reads, because we don't know how many bytes
// will be received. This is normally the most convenient mode
// (and also the default mode for reading data).
lLastError = serial.SetupReadTimeouts(CSerial::EReadTimeoutNonblocking);
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port read timeout."));
// ============================ FIN CONFIG COM =================================//
bool first = true;
int goalNum = 0;
int color = 3;
ArTime start;
start.setToNow();
while (Aria::getRunning())
{
robot.lock();
// inicia el primer punto
if (first || gotoPoseAction.haveAchievedGoal())
{
first = false;
goalNum++; //cambia de 0 a 1 el contador
printf("El contador esta en: --> %d <---\n",goalNum);
if (goalNum > 20)
goalNum = 1;
//comienza la secuencia de puntos
if (goalNum == 1)
{
gotoPoseAction.setGoal(ArPose(1150, 0));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
// Create the sound queue.
ArSoundsQueue soundQueue;
// Run the sound queue in a new thread
soundQueue.runAsync();
std::vector<const char*> filenames;
filenames.push_back("sound-r2a.wav");
soundQueue.play(filenames[0]);
}
else if (goalNum == 2)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn.myActivate = 1;
turn.myDirection = 1;
turn.activate();
ArUtil::sleep(1000);
turn.deactivate();
turn.myActivate = 0;
turn.myDirection = 0;
robot.lock();
}
else if (goalNum == 3)
{
gotoPoseAction.setGoal(ArPose(1150, 2670));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
}
else if (goalNum == 4)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 1;
turn2.activate();
ArUtil::sleep(1000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 5)
{
gotoPoseAction.setGoal(ArPose(650, 2670));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 6)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 1;
turn2.activate();
ArUtil::sleep(1000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 7)
{
gotoPoseAction.setGoal(ArPose(650, 0));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 8)
{
gotoPoseAction.setGoal(ArPose(1800,1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 9)
{
gotoPoseAction.setGoal(ArPose(2600, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 10)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 850));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 2)
{
gotoPoseAction.setGoal(ArPose(3500, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1550));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 11)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 613));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 2)
{
printf("Gira 180 grados derecha\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 2;
turn2.activate();
ArUtil::sleep(2000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
goalNum = 19;
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1785));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 12)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3300, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3300, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 13)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3500, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3500, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 14)
{
robot.unlock();
//Valor para el while
bool fContinue = true;
// <<<<<<------------- 1 Parte Secuencia: BAJA BRAZO ------------->>>>>> //
lLastError = serial.Write("b");
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
//-------------------------E S C U C H A C O M ----------------------------//
do
{
// Wait for an event
lLastError = serial.WaitEvent();
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to wait for a COM-port event."));
// Save event
const CSerial::EEvent eEvent = serial.GetEventType();
// Handle break event
if (eEvent & CSerial::EEventBreak)
{
printf("\n### BREAK received ###\n");
}
// Handle CTS event
if (eEvent & CSerial::EEventCTS)
{
printf("\n### Clear to send %s ###\n", serial.GetCTS()?"on":"off");
}
// Handle DSR event
if (eEvent & CSerial::EEventDSR)
{
printf("\n### Data set ready %s ###\n", serial.GetDSR()?"on":"off");
}
// Handle error event
if (eEvent & CSerial::EEventError)
{
printf("\n### ERROR: ");
switch (serial.GetError())
{
case CSerial::EErrorBreak: printf("Break condition"); break;
case CSerial::EErrorFrame: printf("Framing error"); break;
case CSerial::EErrorIOE: printf("IO device error"); break;
case CSerial::EErrorMode: printf("Unsupported mode"); break;
case CSerial::EErrorOverrun: printf("Buffer overrun"); break;
case CSerial::EErrorRxOver: printf("Input buffer overflow"); break;
case CSerial::EErrorParity: printf("Input parity error"); break;
case CSerial::EErrorTxFull: printf("Output buffer full"); break;
default: printf("Unknown"); break;
}
printf(" ###\n");
}
// Handle ring event
if (eEvent & CSerial::EEventRing)
{
printf("\n### RING ###\n");
}
// Handle RLSD/CD event
if (eEvent & CSerial::EEventRLSD)
{
printf("\n### RLSD/CD %s ###\n", serial.GetRLSD()?"on":"off");
}
// Handle data receive event
if (eEvent & CSerial::EEventRecv)
{
// Read data, until there is nothing left
DWORD dwBytesRead = 0;
char szBuffer[101];
do
{
// Lee datos del Puerto COM
lLastError = serial.Read(szBuffer,sizeof(szBuffer)-1,&dwBytesRead);
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to read from COM-port."));
if (dwBytesRead > 0)
{
//Preseteo color
int color = 0;
// Finaliza el dato, asi que sea una string valida
szBuffer[dwBytesRead] = '\0';
// Display the data
printf("%s", szBuffer);
// <<<<<<----------- 2 Parte Secuencia: CIERRA GRIPPER ----------->>>>>> //
if (strchr(szBuffer,76))
{
lLastError = serial.Write("c");
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
}
// <<<<<<------------- 3 Parte Secuencia: SUBE BRAZO ------------->>>>>> //
if (strchr(szBuffer,117))
{
lLastError = serial.Write("s");
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
}
// <<<<<<------------- 4 Parte Secuencia: COLOR ------------->>>>>> //
if (strchr(szBuffer,72))
{
lLastError = serial.Write("C");
if (lLastError != ERROR_SUCCESS)
return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
}
// <<<<<<---------- 5.1 Parte Secuencia: COLOR ROJO---------->>>>>> //
if (strchr(szBuffer,82))
{
color = 1;
//salir del bucle
fContinue = false;
}
// <<<<<<---------- 5.2 Parte Secuencia: COLOR AZUL ---------->>>>>> //
if (strchr(szBuffer,66))
{
color = 2;
//salir del bucle
fContinue = false;
}
// <<<<<<---------- 5.3 Parte Secuencia: COLOR VERDE ---------->>>>>> //
if (strchr(szBuffer,71))
{
color = 3;
//salir del bucle
fContinue = false;
}
}
}
while (dwBytesRead == sizeof(szBuffer)-1);
}
}
while (fContinue);
// Close the port again
serial.Close();
robot.lock();
}
else if (goalNum == 15)
{
printf("Gira 180 grados derecha\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 2;
turn2.activate();
ArUtil::sleep(2000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 16)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3300, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3300, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 17)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 603));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1795));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 18)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 860));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1540));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 19)
{
gotoPoseAction.setGoal(ArPose(2600, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 20)
{
gotoPoseAction.setGoal(ArPose(1800, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
if(start.mSecSince() >= duration) {
ArLog::log(ArLog::Normal, "No puede llegar al punto, y la aplicacion saldra en %d", duration/1000);
gotoPoseAction.cancelGoal();
robot.unlock();
ArUtil::sleep(3000);
break;
}
robot.unlock();
ArUtil::sleep(10);
}
// Robot desconectado al terminal el sleep
Aria::shutdown();
//------------ F I N M A I N D E L P R O G R A M A D E L R O B O T-----------//
return 0;
}
int _tmain(int argc, char** argv)
{
//-------------- M A I N D E L P R O G R A M A D E L R O B O T------------//
//----------------------------------------------------------------------------------//
//inicializaion de variables
Aria::init();
ArArgumentParser parser(&argc, argv);
parser.loadDefaultArguments();
ArSimpleConnector simpleConnector(&parser);
ArRobot robot;
ArSonarDevice sonar;
ArAnalogGyro gyro(&robot);
robot.addRangeDevice(&sonar);
ActionTurns turn(400, 55);
robot.addAction(&turn, 49);
ActionTurns turn2(400, 55);
robot.addAction(&turn2, 49);
turn.deactivate();
turn2.deactivate();
// presionar tecla escape para salir del programa
ArKeyHandler keyHandler;
Aria::setKeyHandler(&keyHandler);
robot.attachKeyHandler(&keyHandler);
printf("Presionar ESC para salir\n");
// uso de sonares para evitar colisiones con las paredes u
// obstaculos grandes, mayores a 8cm de alto
ArActionLimiterForwards limiterAction("limitador velocidad cerca", 300, 600, 250);
ArActionLimiterForwards limiterFarAction("limitador velocidad lejos", 300, 1100, 400);
ArActionLimiterTableSensor tableLimiterAction;
robot.addAction(&tableLimiterAction, 100);
robot.addAction(&limiterAction, 95);
robot.addAction(&limiterFarAction, 90);
// Inicializon la funcion de goto
ArActionGoto gotoPoseAction("goto");
robot.addAction(&gotoPoseAction, 50);
// Finaliza el goto si es que no hace nada
ArActionStop stopAction("stop");
robot.addAction(&stopAction, 40);
// Parser del CLI
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
Aria::logOptions();
exit(1);
}
// Conexion del robot
if (!simpleConnector.connectRobot(&robot))
{
printf("Could not connect to robot... exiting\n");
Aria::exit(1);
}
robot.runAsync(true);
// enciende motores, apaga sonidos
robot.enableMotors();
robot.comInt(ArCommands::SOUNDTOG, 0);
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
const int duration = 100000; //msec
ArLog::log(ArLog::Normal, "Completados los puntos en %d segundos", duration/1000);
bool first = true;
int goalNum = 0;
int color = 3;
ArTime start;
start.setToNow();
while (Aria::getRunning())
{
robot.lock();
// inicia el primer punto
if (first || gotoPoseAction.haveAchievedGoal())
{
first = false;
goalNum++; //cambia de 0 a 1 el contador
printf("El contador esta en: --> %d <---\n",goalNum);
if (goalNum > 20)
goalNum = 1;
//comienza la secuencia de puntos
if (goalNum == 1)
{
gotoPoseAction.setGoal(ArPose(1150, 0));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
}
else if (goalNum == 2)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn.myActivate = 1;
turn.myDirection = 1;
turn.activate();
ArUtil::sleep(1000);
turn.deactivate();
turn.myActivate = 0;
turn.myDirection = 0;
robot.lock();
}
else if (goalNum == 3)
{
gotoPoseAction.setGoal(ArPose(1150, 2670));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
// Imprimo algunos datos del robot como posicion velocidad y bateria
robot.lock();
ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
robot.unlock();
}
else if (goalNum == 4)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 1;
turn2.activate();
ArUtil::sleep(1000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 5)
{
gotoPoseAction.setGoal(ArPose(650, 2670));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 6)
{
printf("Gira 90 grados izquierda\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 1;
turn2.activate();
ArUtil::sleep(1000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 7)
{
gotoPoseAction.setGoal(ArPose(650, 0));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 8)
{
gotoPoseAction.setGoal(ArPose(1800,1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 9)
{
gotoPoseAction.setGoal(ArPose(2600, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 10)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 850));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 2)
{
gotoPoseAction.setGoal(ArPose(3500, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1550));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 11)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 613));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 2)
{
printf("Gira 180 grados derecha\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 2;
turn2.activate();
ArUtil::sleep(2000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
goalNum = 19;
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1785));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 12)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3300, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3300, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 13)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3500, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3500, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 14)
{
//secuencia de drop de la figura
}
else if (goalNum == 15)
{
printf("Gira 180 grados derecha\n");
robot.unlock();
turn2.myActivate = 1;
turn2.myDirection = 2;
turn2.activate();
ArUtil::sleep(2000);
turn2.deactivate();
turn2.myActivate = 0;
turn2.myDirection = 0;
robot.lock();
}
else if (goalNum == 16)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(3300, 413));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(3300, 1985));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 17)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 603));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1795));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 18)
{
if (color == 1)
{
gotoPoseAction.setGoal(ArPose(2800, 860));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if (color == 3)
{
gotoPoseAction.setGoal(ArPose(2800, 1540));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
else if (goalNum == 19)
{
gotoPoseAction.setGoal(ArPose(2600, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
else if (goalNum == 20)
{
gotoPoseAction.setGoal(ArPose(1800, 1199));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
}
if(start.mSecSince() >= duration) {
ArLog::log(ArLog::Normal, "No puede llegar al punto, y la aplicacion saldra en %d", duration/1000);
gotoPoseAction.cancelGoal();
robot.unlock();
ArUtil::sleep(3000);
break;
}
robot.unlock();
ArUtil::sleep(10);
}
// Robot desconectado al terminal el sleep
Aria::shutdown();
//----------------------------------------------------------------------------------//
return 0;
}
int main(int argc, char **argv)
{
Aria::init();
ArArgumentParser parser(&argc, argv);
parser.loadDefaultArguments();
ArRobot robot;
ArAnalogGyro gyro(&robot);
ArSonarDevice sonar;
ArRobotConnector robotConnector(&parser, &robot);
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
// Connect to the robot, get some initial data from it such as type and name,
// and then load parameter files for this robot.
if(!robotConnector.connectRobot())
{
ArLog::log(ArLog::Terse, "gotoActionExample: Could not connect to the robot.");
if(parser.checkHelpAndWarnUnparsed())
{
// -help not given
Aria::logOptions();
Aria::exit(1);
}
}
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
Aria::logOptions();
Aria::exit(1);
}
ArLog::log(ArLog::Normal, "gotoActionExample: Connected to robot.");
robot.addRangeDevice(&sonar);
robot.runAsync(true);
// Make a key handler, so that escape will shut down the program
// cleanly
ArKeyHandler keyHandler;
Aria::setKeyHandler(&keyHandler);
robot.attachKeyHandler(&keyHandler);
printf("You may press escape to exit\n");
// Collision avoidance actions at higher priority
ArActionLimiterForwards limiterAction("speed limiter near", 300, 600, 250);
ArActionLimiterForwards limiterFarAction("speed limiter far", 300, 1100, 400);
ArActionLimiterTableSensor tableLimiterAction;
robot.addAction(&tableLimiterAction, 100);
robot.addAction(&limiterAction, 95);
robot.addAction(&limiterFarAction, 90);
// Goto action at lower priority
ArActionGoto gotoPoseAction("goto");
robot.addAction(&gotoPoseAction, 50);
// Stop action at lower priority, so the robot stops if it has no goal
ArActionStop stopAction("stop");
robot.addAction(&stopAction, 40);
// turn on the motors, turn off amigobot sounds
robot.enableMotors();
robot.comInt(ArCommands::SOUNDTOG, 0);
const int duration = 30000; //msec
ArLog::log(ArLog::Normal, "Going to four goals in turn for %d seconds, then cancelling goal and exiting.", duration/1000);
bool first = true;
int goalNum = 0;
ArTime start;
start.setToNow();
while (Aria::getRunning())
{
robot.lock();
// Choose a new goal if this is the first loop iteration, or if we
// achieved the previous goal.
if (first || gotoPoseAction.haveAchievedGoal())
{
first = false;
goalNum++;
if (goalNum > 4)
goalNum = 1; // start again at goal #1
// set our positions for the different goals
if (goalNum == 1)
gotoPoseAction.setGoal(ArPose(2500, 0));
else if (goalNum == 2)
gotoPoseAction.setGoal(ArPose(2500, 2500));
else if (goalNum == 3)
gotoPoseAction.setGoal(ArPose(0, 2500));
else if (goalNum == 4)
gotoPoseAction.setGoal(ArPose(0, 0));
ArLog::log(ArLog::Normal, "Going to next goal at %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if(start.mSecSince() >= duration) {
ArLog::log(ArLog::Normal, "%d seconds have elapsed. Cancelling current goal, waiting 3 seconds, and exiting.", duration/1000);
gotoPoseAction.cancelGoal();
robot.unlock();
ArUtil::sleep(3000);
break;
}
robot.unlock();
ArUtil::sleep(100);
}
// Robot disconnected or time elapsed, shut down
Aria::exit(0);
return 0;
}
int APIENTRY _tWinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPTSTR lpCmdLine,
int nCmdShow)
{
UNREFERENCED_PARAMETER(hPrevInstance);
UNREFERENCED_PARAMETER(lpCmdLine);
//-------------- M A I N D E L P R O G R A M A D E L R O B O T------------//
//----------------------------------------------------------------------------------------------------------
//inicializaion de variables
Aria::init();
ArArgumentParser parser(&argc, argv);
parser.loadDefaultArguments();
ArSimpleConnector simpleConnector(&parser);
ArRobot robot;
ArSonarDevice sonar;
ArAnalogGyro gyro(&robot);
robot.addRangeDevice(&sonar);
// presionar tecla escape para salir del programa
ArKeyHandler keyHandler;
Aria::setKeyHandler(&keyHandler);
robot.attachKeyHandler(&keyHandler);
printf("You may press escape to exit\n");
// uso de sonares para evitar colisiones con las paredes u
// obstaculos grandes, mayores a 8cm de alto
ArActionLimiterForwards limiterAction("speed limiter near", 300, 600, 250);
ArActionLimiterForwards limiterFarAction("speed limiter far", 300, 1100, 400);
ArActionLimiterTableSensor tableLimiterAction;
robot.addAction(&tableLimiterAction, 100);
robot.addAction(&limiterAction, 95);
robot.addAction(&limiterFarAction, 90);
// Inicializon la funcion de goto
ArActionGoto gotoPoseAction("goto");
robot.addAction(&gotoPoseAction, 50);
// Finaliza el goto si es que no hace nada
ArActionStop stopAction("stop");
robot.addAction(&stopAction, 40);
// Parser del CLI
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
Aria::logOptions();
exit(1);
}
// Conexion del robot
if (!simpleConnector.connectRobot(&robot))
{
printf("Could not connect to robot... exiting\n");
Aria::exit(1);
}
robot.runAsync(true);
// enciende motores, apaga sonidos
robot.enableMotors();
robot.comInt(ArCommands::SOUNDTOG, 0);
const int duration = 100000; //msec
ArLog::log(ArLog::Normal, "Completados los puntos en %d segundos", duration/1000);
bool first = true;
int horiz = 1800;
int vert = 380;
int goalNum = 0;
ArTime start;
start.setToNow();
while (Aria::getRunning())
{
robot.lock();
// inicia el primer punto
if (first || gotoPoseAction.haveAchievedGoal())
{
first = false;
goalNum++; //cambia de 0 a 1 el contador
if (goalNum > 7)
goalNum = 1;
//comienza la secuencia de puntos
if (goalNum == 1)
gotoPoseAction.setGoal(ArPose(horiz, vert*0));
else if (goalNum == 2)
gotoPoseAction.setGoal(ArPose(0, vert*1));
else if (goalNum == 3)
gotoPoseAction.setGoa l(ArPose(horiz, vert*2)+5);
else if (goalNum == 4)
gotoPoseAction.setGoal(ArPose(0, vert*3));
else if (goalNum == 5)
gotoPoseAction.setGoal(ArPose(horiz, vert*4+5));
else if (goalNum == 6)
gotoPoseAction.setGoal(ArPose(0, vert*5));
else if (goalNum == 7)
gotoPoseAction.setGoal(ArPose(0, vert*0));
ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f",
gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
}
if(start.mSecSince() >= duration) {
ArLog::log(ArLog::Normal, "%d seconds have elapsed. Cancelling current goal, waiting 3 seconds, and exiting.", duration/1000);
gotoPoseAction.cancelGoal();
robot.unlock();
ArUtil::sleep(3000);
break;
}
robot.unlock();
ArUtil::sleep(100);
}
// Robot desconectado al terminal el sleep
Aria::shutdown();
return 0;
//----------------------------------------------------------------------------------------------------------
// TODO: Place code here.
MSG msg;
HACCEL hAccelTable;
// Initialize global strings
LoadString(hInstance, IDS_APP_TITLE, szTitle, MAX_LOADSTRING);
LoadString(hInstance, IDC_VENTANAROBOT, szWindowClass, MAX_LOADSTRING);
MyRegisterClass(hInstance);
// Perform application initialization:
if (!InitInstance (hInstance, nCmdShow))
{
return FALSE;
}
hAccelTable = LoadAccelerators(hInstance, MAKEINTRESOURCE(IDC_VENTANAROBOT));
// Main message loop:
while (GetMessage(&msg, NULL, 0, 0))
{
if (!TranslateAccelerator(msg.hwnd, hAccelTable, &msg))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
}
return (int) msg.wParam;
}
