int main(void)
{
/* Simulate a compal loader saying "ACK" */
unsigned i = 0;
for (i = 0; i < sizeof(phone_ack); i++) {
putchar_asm(phone_ack[i]);
}
/* initialize board without interrupts */
board_init(0);
sercomm_uart = sercomm_get_uart();
/* Say hi */
puts("\n\nOsmocomBB Loader (revision " GIT_REVISION ")\n");
puts(hr);
fb_clear();
fb_setfg(FB_COLOR_BLACK);
fb_setbg(FB_COLOR_WHITE);
fb_setfont(FB_FONT_HELVB14);
fb_gotoxy(2,20);
fb_putstr("loader",framebuffer->width-4);
fb_setfg(FB_COLOR_RED);
fb_setbg(FB_COLOR_BLUE);
fb_gotoxy(2,25);
fb_boxto(framebuffer->width-3,38);
fb_setfg(FB_COLOR_WHITE);
fb_setfont(FB_FONT_HELVR08);
fb_gotoxy(8,33);
fb_putstr("osmocom-bb",framebuffer->width-4);
fb_flush();
/* Identify environment */
printf("Running on %s in environment %s\n", manifest_board,
manifest_environment);
/* Initialize flash driver */
if (flash_init(&the_flash, 0)) {
puts("Failed to initialize flash!\n");
} else {
printf("Found flash of %zu bytes at 0x%p with %zu regions\n",
the_flash.f_size, the_flash.f_base,
the_flash.f_nregions);
for (i = 0; i < the_flash.f_nregions; i++) {
printf(" Region %d of %zu pages with %zu bytes each.\n",
i,
the_flash.f_regions[i].fr_bnum,
the_flash.f_regions[i].fr_bsize);
}
}
/* Set up a key handler for powering off */
keypad_set_handler(&key_handler);
/* Set up loader communications */
sercomm_register_rx_cb(SC_DLCI_LOADER, &cmd_handler);
/* Notify any running osmoload about our startup */
loader_send_init(SC_DLCI_LOADER);
/* Wait for events */
while (1) {
keypad_poll();
uart_poll(sercomm_uart);
}
/* NOT REACHED */
twl3025_power_off();
}
int main(void)
{
/* Simulate a compal loader saying "ACK" */
int i = 0;
for (i = 0; i < sizeof(phone_ack); i++) {
putchar_asm(phone_ack[i]);
}
/* Always disable wdt (some platforms enable it on boot) */
wdog_enable(0);
/* Disable the bootrom mapping */
calypso_bootrom(0);
/* Initialize TWL3025 for power control */
twl3025_init();
/* Backlight */
bl_mode_pwl(1);
bl_level(50);
/* Initialize UART without interrupts */
uart_init(SERCOMM_UART_NR, 0);
uart_baudrate(SERCOMM_UART_NR, UART_115200);
/* Initialize HDLC subsystem */
sercomm_init();
/* Say hi */
puts("\n\nOSMOCOM Loader (revision " GIT_REVISION ")\n");
puts(hr);
/* Identify environment */
printf("Running on %s in environment %s\n", manifest_board,
manifest_environment);
/* Initialize flash driver */
if (flash_init(&the_flash, 0)) {
puts("Failed to initialize flash!\n");
} else {
printf("Found flash of %d bytes at 0x%x with %d regions\n",
the_flash.f_size, the_flash.f_base,
the_flash.f_nregions);
int i;
for (i = 0; i < the_flash.f_nregions; i++) {
printf(" Region %d of %d pages with %d bytes each.\n",
i,
the_flash.f_regions[i].fr_bnum,
the_flash.f_regions[i].fr_bsize);
}
}
/* Set up a key handler for powering off */
keypad_set_handler(&key_handler);
/* Set up loader communications */
sercomm_register_rx_cb(SC_DLCI_LOADER, &cmd_handler);
/* Notify any running osmoload about our startup */
loader_send_init(SC_DLCI_LOADER);
/* Wait for events */
while (1) {
keypad_poll();
uart_poll(SERCOMM_UART_NR);
}
/* NOT REACHED */
twl3025_power_off();
}
