void pwrbtn_srv_test(void)
{
DRIVER_API_RC ret;
#ifndef CONFIG_UI_SERVICE_IMPL
pwrbtn_init(&pwrbtn_aon_0_alone, get_test_queue());
/* Wait pwrbtn unitialisation */
local_task_sleep_ms(1500);
#endif
cu_print("##################################################\n");
cu_print("# #\n");
cu_print("# !!! Pins AON %d and SS %d must be connected ! #\n",
PWRBTN_TST_AON_INPUT_PIN,
PWRBTN_TST_SS_OUTPUT_PIN);
cu_print("# #\n");
cu_print("# Purpose of service : Validate power button #\n");
cu_print("##################################################\n");
ret = press_simulation(SS_GPIO_SERVICE_ID, PWRBTN_TST_AON_INPUT_PIN,
PWRBTN_TST_SS_OUTPUT_PIN);
CU_ASSERT("Test power button module failed", ret == DRV_RC_OK);
CU_ASSERT("Press 700ms not notified", tst_very_short == 1);
CU_ASSERT("Press 2500ms not notified", tst_short == 1);
CU_ASSERT("Press 4000ms not notified", tst_single == 1);
CU_ASSERT("Press 7000ms not notified", tst_long == 1);
CU_ASSERT("Press 12000ms notified", tst_very_long == 0);
CU_ASSERT("Double press not notified", tst_double == 1);
CU_ASSERT("Press 700ms not notified", tst_double_fail_1 == 1);
CU_ASSERT("Press 2700ms not notified", tst_double_fail_2 == 1);
CU_ASSERT("Press 300ms notified", tst_too_short == 0);
cu_print("##################################################\n");
cu_print("# Test module power button done #\n");
cu_print("##################################################\n");
}
static void trans_delay(void)
{
local_task_sleep_ms(100);
}
int press_simulation(unsigned int service_id, unsigned int input_pin,
unsigned int output_pin)
{
cfw_service_conn_t *gpio_service_conn = NULL;
cfw_client_t *gpio_client = cfw_client_init(
get_test_queue(), pwrbtn_tst_handle_msg, NULL);
if (!cfw_service_registered(service_id)) {
cu_print("TST_PWRBTN: ss gpio service not registered\n");
return DRV_RC_FAIL;
}
cfw_open_service_conn(gpio_client, service_id, &gpio_service_conn);
SRV_WAIT((!gpio_service_conn), 2000);
CU_ASSERT("TST_PWRBTN: can not open ss gpio service",
(gpio_service_conn));
if (gpio_service_conn == NULL) {
return DRV_RC_FAIL;
}
/* The configuration put the pin to 0 => the pin have to be set to 1
* before first press simulation */
TEST_PWRBTN(configure, "TST_PWRBTN: gpio configuration failed",
gpio_service_conn, output_pin, 1,
"SS pin 2 output");
SRV_WAIT((!tst_pwrbtn_configure), 2000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait state response */
SRV_WAIT((!tst_pwrbtn_set_state), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
tst_step = VERY_SH_PRESS;
cu_print("Start pattern with press_duration = 700ms\n");
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_very_short), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 2500ms\n");
tst_step = SH_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(2500);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_short), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 4000ms\n");
tst_step = SINGLE_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(4000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_single), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 7000ms\n");
tst_step = L_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(7000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_long), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 12000ms\n");
tst_step = VERY_L_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(12000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait 3s */
local_task_sleep_ms(3000);
/* Start failed double press pattern : very_short_press + 550 ms delay max + short_press */
cu_print("Start double pattern press failed...\n");
tst_step = DBLE_PRESS_FAIL_1;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_1), 2000);
/* wait between the very short press */
local_task_sleep_ms(550);
tst_step = DBLE_PRESS_FAIL_2;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(2700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_2), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start too short pattern with duration = 300ms\n");
tst_step = TOO_SHORT_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(300);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_2), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
/* Start double press pattern : very_short_press + 350 ms delay max + very_short_press */
cu_print("Start double pattern press...\n");
tst_step = DBLE_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait between the very short press */
local_task_sleep_ms(350);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(900);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double), 2000);
/* wait 2s */
local_task_sleep_ms(2000);
cfw_close_service_conn(gpio_service_conn, NULL);
return DRV_RC_OK;
}
