/*********************************************************************
Function: void RtccInitClock(void)
PreCondition: None
Input: None
Output: None
Side Effects: Enables the secondary oscillator from Timer1
Overview: The function initializes the RTCC device. It starts the RTCC clock,
sets the RTCC Off and disables RTCC write. Disables the OE.
Note: None
********************************************************************/
void RtccInitClock(void)
{
// enable the Secondary Oscillator
#if defined (RTCC_SFR_V1)
T1CONbits.SOSCEN = 1;
#else
T1CONbits.T1OSCEN = 1;
#endif
#if defined (RTCC_V1)
RTCCFG = 0x0;
#else
RTCCON1=0x0;
#endif
RTCCAL = 0x00;
if(mRtccIsOn())
{
if(!mRtccIsWrEn())
{
RtccWrOn();
}
mRtccOff();
}
mRtccWrOff();
}
/*********************************************************************
* Function: BOOL RtccWriteTime(const rtccTime* pTm, BOOL di)
*
* PreCondition: pTm pointing to a valid rtccTime structure having proper values:
* - sec: BCD codification, 00-59
* - min: BCD codification, 00-59
* - hour: BCD codification, 00-24
* Input: pTm - pointer to a constant rtccTime union
* di - if interrupts need to be disabled
* Output: TRUE '1' : If all the values are within range
* FALSE '0' : If any value is out of above mentioned range.
* Side Effects: None
* Overview: The function sets the current time of the RTCC device.
* Note: - The write is successful only if Wr Enable is set.
* The function will enable the write itself, if needed.
* Also, the Alarm will be temporarily disabled and the
* device will be stopped (On set to 0) in order
* to safely perform the update of the RTC time register.
* However, the device status will be restored.
* - Usually the disabling of the interrupts is desired, if the user has to have more
* precise control over the actual moment of the time setting.
********************************************************************/
BOOL RtccWriteTime(const rtccTime* pTm , BOOL di)
{
WORD_VAL tempHourWDay ;
WORD_VAL tempMinSec ;
UINT8 CPU_IPL;
BOOL wasWrEn;
BOOL wasOn;
BOOL wasAlrm=FALSE;
if((MAX_MIN < pTm->f.min )|| (MAX_SEC < pTm->f.sec) || (MAX_HOUR < pTm->f.hour))
{
return(FALSE);
}
tempMinSec.byte.HB = pTm->f.min;
tempMinSec.byte.LB =pTm->f.sec; // update the desired fields
if(di)
{
/* Disable Global Interrupt */
mSET_AND_SAVE_CPU_IP(CPU_IPL,7);
}
if(!(wasWrEn= mRtccIsWrEn()))
{
RtccWrOn(); // have to allow the WRTEN in order to write the new value
}
if((wasOn=mRtccIsOn()))
{
wasAlrm= mRtccIsAlrmEnabled();
mRtccOff(); // turn module off before updating the time
}
mRtccClearRtcPtr();
mRtccSetRtcPtr(RTCCPTR_MASK_HRSWEEK);
tempHourWDay.Val = RTCVAL;
tempHourWDay.byte.LB = pTm->f.hour;
mRtccClearRtcPtr();
mRtccSetRtcPtr(RTCCPTR_MASK_HRSWEEK);
RTCVAL = tempHourWDay.Val; // update device value
RTCVAL = tempMinSec.Val;
if(wasOn)
{
mRtccOn();
if(wasAlrm)
{
mRtccAlrmEnable();
}
if(wasWrEn)
{
RtccWrOn();
}
}
else
{
if(!wasWrEn)
{
mRtccWrOff();
}
}
if(di)
{
/* Enable Global Interrupt */
mRESTORE_CPU_IP(CPU_IPL);
}
return(TRUE);
}
