int main() {
SystemInit();
SER_Init() ;
#if !defined(NO_FILESYSTEM)
init_card () ; /* initializing SD card */
#endif
init_time() ;
#if defined(DEBUG_CYASSL)
printf("Turning ON Debug message\n") ;
CyaSSL_Debugging_ON() ;
#endif
#ifdef HAVE_KEIL_RTX
os_sys_init (main_task) ;
#else
main_task() ;
#endif
return 0 ; /* There should be no return here */
}
int
main(int argc, char *argv[])
{
/* Initialize board-specific hardware */
BSP_Init();
led1_off();
led2_off();
#if 1
/* Initialize TimerA and oscillator */
BCSCTL3 |= LFXT1S_2; // LFXT1 = VLO
TACCTL0 = CCIE; // TACCR0 interrupt enabled
TACCR0 = 12000; // ~1 second
TACTL = TASSEL_1 + MC_1; // ACLK, upmode
#endif
while (1)
{
main_init();
while (1)
{
main_task();
}
}
return 0;
}
int main(void)
{
Disp_Init(DISP_INIT_ON); //初始化 LCD
Disp_Clear();
KEY_Init(KEY_BEEP_KEY|KEY_AUTO_EL_ON); //初始化 Keyborad
KEY_Beep_Mask_Set(0xffffffff);
KEY_EL_Mask_Set(0xffffffff);
EL_Set_Timeout(20); //定时关闭背光灯
Sys_Auto_Poweroff_Set(60*2); //定时待机
//Meanless for 0218/0318/0518
Disp_Icon_Battery_Time_Set(1,ICON_AT_TAIL);
Disp_Icon_Battery_Time_Refresh();
Disp_Set_Color(SET_FONT_COLOR, 0x0000); //黑
Disp_Set_Color(SET_BACK_COLOR, 0xFFFF); //白
Disp_Set_Color(SET_SELECT_COLOR, 0x07E0); //绿
Disp_Set_Color(SET_CLEAR_COLOR, 0xFFFF); //白
adminPsd_init(); //一次性初始化，数据初置
db_check(); //数据库检查
//wifiInit_open(); //wifi初始化
main_task();
return 0;
}
CCL_NAMESPACE_BEGIN
static void shade_background_pixels(Device *device, DeviceScene *dscene, int res, vector<float3>& pixels, Progress& progress)
{
/* create input */
int width = res;
int height = res;
device_vector<uint4> d_input;
device_vector<float4> d_output;
uint4 *d_input_data = d_input.resize(width*height);
for(int y = 0; y < height; y++) {
for(int x = 0; x < width; x++) {
float u = x/(float)width;
float v = y/(float)height;
uint4 in = make_uint4(__float_as_int(u), __float_as_int(v), 0, 0);
d_input_data[x + y*width] = in;
}
}
/* compute on device */
d_output.resize(width*height);
memset((void*)d_output.data_pointer, 0, d_output.memory_size());
device->const_copy_to("__data", &dscene->data, sizeof(dscene->data));
device->mem_alloc(d_input, MEM_READ_ONLY);
device->mem_copy_to(d_input);
device->mem_alloc(d_output, MEM_WRITE_ONLY);
DeviceTask main_task(DeviceTask::SHADER);
main_task.shader_input = d_input.device_pointer;
main_task.shader_output = d_output.device_pointer;
main_task.shader_eval_type = SHADER_EVAL_BACKGROUND;
main_task.shader_x = 0;
main_task.shader_w = width*height;
main_task.num_samples = 1;
main_task.get_cancel = function_bind(&Progress::get_cancel, &progress);
/* disabled splitting for now, there's an issue with multi-GPU mem_copy_from */
list<DeviceTask> split_tasks;
main_task.split(split_tasks, 1, 128*128);
foreach(DeviceTask& task, split_tasks) {
device->task_add(task);
device->task_wait();
device->mem_copy_from(d_output, task.shader_x, 1, task.shader_w, sizeof(float4));
}
/*FUNCTION**********************************************************************
*
* Function Name : startup_task
* Description : Wrapper over main_task..
*
*END**************************************************************************/
void startup_task(void* argument)
{
main_task(argument);
while(1);
}
int main()
{
// Initialize the LIN interface
if (l_sys_init())
return -1;
// Initialize the interface
if (l_ifc_init_UART1())
return -1;
// Set UART TX to interrupt level 5
// Set UART RX to interrupt level 5
struct l_irqmask irqmask = { 6, 6 };
l_sys_irq_restore(irqmask);
l_bool configuration_ok = false;
l_u16 configuration_timeout = 1000;
do {
if (l_ifc_read_status_UART1() & (1 << 6)) {
configuration_ok = true;
break;
}
__delay_ms(5);
configuration_timeout--;
} while (configuration_timeout || !configuration_ok);
if (!configuration_ok) {
// Master did not configure this node.
return -1;
}
TRISBbits.TRISB8 = 1;
__builtin_write_OSCCONL(OSCCON & ~(1<<6));
RPINR7bits.IC1R = 8;
__builtin_write_OSCCONL(OSCCON | (1<<6));
// Setup a 125ms timer
T1CONbits.TON = 1;
T1CONbits.TSIDL = 0;
T1CONbits.TGATE = 0;
T1CONbits.TCKPS = 2;
T1CONbits.TSYNC = 0;
T1CONbits.TCS = 0;
PR1 = FCY / 64ul / 8ul;
IEC0bits.T1IE = 1;
IPC0bits.T1IP = 4;
IC1CON2bits.SYNCSEL = 0b10100;
IC1CON1bits.ICTSEL = 0b111;
IC1CON1bits.ICI = 0x00;
IC1CON2bits.ICTRIG = 0x00;
IC1CON1bits.ICM = 0x03;
IEC0bits.IC1IE = 1;
IPC0bits.IC1IP = 3;
while (1) {
main_task();
}
return -1;
}
