static void __init init_cpu_0_dvfs(struct dvfs *cpud)
{
int i;
struct dvfs *d = NULL;
/* Init single G CPU core 0 dvfs if this particular SKU/bin has it.
Max rates in multi-core and single-core tables must be the same */
for (i = 0; i < ARRAY_SIZE(cpu_0_dvfs_table); i++) {
if (match_dvfs_one(&cpu_0_dvfs_table[i],
cpud->speedo_id, cpud->process_id)) {
d = &cpu_0_dvfs_table[i];
break;
}
}
if (d) {
for (i = 0; i < cpud->num_freqs; i++) {
d->freqs[i] *= d->freqs_mult;
if (d->freqs[i] == 0) {
BUG_ON(i == 0);
d->freqs[i] = d->freqs[i - 1];
}
}
BUG_ON(cpud->freqs[cpud->num_freqs - 1] !=
d->freqs[cpud->num_freqs - 1]);
cpu_0_freqs = d->freqs;
}
}
static int __init get_cpu_nominal_mv_index(
int speedo_id, int process_id, struct dvfs **cpu_dvfs)
{
int i, j, mv;
struct dvfs *d;
struct clk *c;
/*
* Start with nominal level for the chips with this speedo_id. Then,
* make sure cpu nominal voltage is below core ("solve from cpu to
* core at nominal").
*/
BUG_ON(speedo_id >= ARRAY_SIZE(cpu_speedo_nominal_millivolts));
mv = cpu_speedo_nominal_millivolts[speedo_id];
if (tegra3_dvfs_rail_vdd_core.nominal_millivolts) {
int core_mv = tegra3_dvfs_rail_vdd_core.nominal_millivolts;
while ((mv > tegra3_dvfs_rail_vdd_cpu.min_millivolts) &&
(tegra3_get_core_floor_mv(mv) > core_mv))
mv -= 25;
}
/*
* Find matching cpu dvfs entry, and use it to determine index to the
* final nominal voltage, that satisfies the following requirements:
* - allows CPU to run at minimum of the maximum rates specified in
* the dvfs entry and clock tree
* - does not violate cpu_to_core dependency as determined above
*/
for (i = 0, j = 0; j < ARRAY_SIZE(cpu_dvfs_table); j++) {
d = &cpu_dvfs_table[j];
if (match_dvfs_one(d, speedo_id, process_id)) {
c = tegra_get_clock_by_name(d->clk_name);
BUG_ON(!c);
for (; i < MAX_DVFS_FREQS; i++) {
if ((d->freqs[i] == 0) ||
(cpu_millivolts[i] == 0) ||
(mv < cpu_millivolts[i]))
break;
if (c->max_rate <= d->freqs[i]*d->freqs_mult) {
i++;
break;
}
}
break;
}
}
BUG_ON(i == 0);
if (j == (ARRAY_SIZE(cpu_dvfs_table) - 1))
pr_err("tegra3_dvfs: WARNING!!!\n"
"tegra3_dvfs: no cpu dvfs table found for chip speedo_id"
" %d and process_id %d: set CPU rate limit at %lu\n"
"tegra3_dvfs: WARNING!!!\n",
speedo_id, process_id, d->freqs[i-1] * d->freqs_mult);
*cpu_dvfs = d;
return (i - 1);
}
void __init tegra_soc_init_dvfs(void)
{
int cpu_speedo_id = tegra_cpu_speedo_id();
int soc_speedo_id = tegra_soc_speedo_id();
int cpu_process_id = tegra_cpu_process_id();
#ifdef CONFIG_TEGRA3_LP_CORE_OVERDRIVE
int core_process_id = 2;
#else
int core_process_id = tegra_core_process_id();
#endif
int i;
int core_nominal_mv_index;
int cpu_nominal_mv_index;
#ifndef CONFIG_TEGRA_CORE_DVFS
tegra_dvfs_core_disabled = true;
#endif
#ifndef CONFIG_TEGRA_CPU_DVFS
tegra_dvfs_cpu_disabled = true;
#endif
/*
* Find nominal voltages for core (1st) and cpu rails before rail
* init. Nominal voltage index in the scaling ladder will also be
* used to determine max dvfs frequency for the respective domains.
*/
core_nominal_mv_index = get_core_nominal_mv_index(soc_speedo_id);
if (core_nominal_mv_index < 0) {
tegra3_dvfs_rail_vdd_core.disabled = true;
tegra_dvfs_core_disabled = true;
core_nominal_mv_index = 0;
}
tegra3_dvfs_rail_vdd_core.nominal_millivolts =
core_millivolts[core_nominal_mv_index];
cpu_nominal_mv_index = get_cpu_nominal_mv_index(
cpu_speedo_id, cpu_process_id, &cpu_dvfs);
BUG_ON((cpu_nominal_mv_index < 0) || (!cpu_dvfs));
tegra3_dvfs_rail_vdd_cpu.nominal_millivolts =
cpu_millivolts[cpu_nominal_mv_index];
/* Init rail structures and dependencies */
tegra_dvfs_init_rails(tegra3_dvfs_rails, ARRAY_SIZE(tegra3_dvfs_rails));
tegra_dvfs_add_relationships(tegra3_dvfs_relationships,
ARRAY_SIZE(tegra3_dvfs_relationships));
/* Search core dvfs table for speedo/process matching entries and
initialize dvfs-ed clocks */
for (i = 0; i < ARRAY_SIZE(core_dvfs_table); i++) {
struct dvfs *d = &core_dvfs_table[i];
if (!match_dvfs_one(d, soc_speedo_id, core_process_id))
continue;
init_dvfs_one(d, core_nominal_mv_index);
}
/* Initialize matching cpu dvfs entry already found when nominal
voltage was determined */
init_dvfs_one(cpu_dvfs, cpu_nominal_mv_index);
init_dvfs_cold(cpu_dvfs, cpu_nominal_mv_index);
/* Finally disable dvfs on rails if necessary */
if (tegra_dvfs_core_disabled)
tegra_dvfs_rail_disable(&tegra3_dvfs_rail_vdd_core);
if (tegra_dvfs_cpu_disabled)
tegra_dvfs_rail_disable(&tegra3_dvfs_rail_vdd_cpu);
pr_info("tegra dvfs: VDD_CPU nominal %dmV, scaling %s\n",
tegra3_dvfs_rail_vdd_cpu.nominal_millivolts,
tegra_dvfs_cpu_disabled ? "disabled" : "enabled");
pr_info("tegra dvfs: VDD_CORE nominal %dmV, scaling %s\n",
tegra3_dvfs_rail_vdd_core.nominal_millivolts,
tegra_dvfs_core_disabled ? "disabled" : "enabled");
}
static int __init get_cpu_nominal_mv_index(
int speedo_id, int process_id, struct dvfs **cpu_dvfs)
{
int i, j, mv, nom_index;
struct dvfs *d;
struct clk *c;
/*
* Find maximum cpu voltage that satisfies cpu_to_core dependency for
* nominal core voltage ("solve from cpu to core at nominal"). Clip
* result to the nominal cpu level for the chips with this speedo_id.
*/
mv = tegra3_dvfs_rail_vdd_core.nominal_millivolts;
for (i = 0; i < MAX_DVFS_FREQS; i++) {
if ((cpu_millivolts[i] == 0) ||
tegra3_get_core_floor_mv(cpu_millivolts[i]) > mv)
break;
}
BUG_ON(i == 0);
mv = cpu_millivolts[i - 1];
pr_info("cpu_nominal_mv: %i\n", mv);
BUG_ON(mv < tegra3_dvfs_rail_vdd_cpu.min_millivolts);
mv = min(mv, tegra_cpu_speedo_mv());
pr_info("cpu_nominal_mv_min: %i\n", mv);
/*
* Find matching cpu dvfs entry, and use it to determine index to the
* final nominal voltage, that satisfies the following requirements:
* - allows CPU to run at minimum of the maximum rates specified in
* the dvfs entry and clock tree
* - does not violate cpu_to_core dependency as determined above
*/
for (i = 0, j = 0; j < ARRAY_SIZE(cpu_dvfs_table); j++) {
d = &cpu_dvfs_table[j];
if (match_dvfs_one(d, speedo_id, process_id)) {
c = tegra_get_clock_by_name(d->clk_name);
BUG_ON(!c);
for (; i < MAX_DVFS_FREQS; i++) {
if ((d->freqs[i] == 0) ||
(cpu_millivolts[i] == 0) ||
(mv < cpu_millivolts[i]))
break;
if (c->max_rate <= d->freqs[i]*d->freqs_mult) {
i++;
break;
}
}
break;
}
}
pr_info("dvfs: freqs_mult: %i\n", d->freqs_mult);
BUG_ON(i == 0);
if (j == (ARRAY_SIZE(cpu_dvfs_table) - 1))
pr_err("tegra3_dvfs: WARNING!!!\n"
"tegra3_dvfs: no cpu dvfs table found for chip speedo_id"
" %d and process_id %d: set CPU rate limit at %lu\n"
"tegra3_dvfs: WARNING!!!\n",
speedo_id, process_id, d->freqs[i-1] * d->freqs_mult);
*cpu_dvfs = d;
nom_index = i - 1;
pr_info("cpu_nominal_mv_index: %i\n", nom_index);
pr_info("cpu_dvfs->speedo_id: %i\n", d->speedo_id);
pr_info("cpu_dvfs->process_id: %i\n", d->process_id);
for (i=0;i<MAX_DVFS_FREQS;i++) {
pr_info("cpu_dvfs->freqs: %lu\n", d->freqs[i]);
}
return nom_index;
}
