/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out.
*
* Return how many valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max)
{
void *buf;
u16 *obuf, *ibuf;
int ret, blen;
blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
if (!buf) {
pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
return 0;
}
/* tx/rx always have the same length */
obuf = buf;
ibuf = buf + blen;
if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
kfree(buf);
return 0;
}
ret = receive_chars(max, ibuf, M3110_RX_FIFO_DEPTH);
kfree(buf);
return ret;
}
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out. It returns how many
* valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max, int len, u8 *buf)
{
u16 out[MAX_READ_LEN], in[MAX_READ_LEN];
u8 *pbuf, valid_str[MAX_READ_LEN];
int i, j, bytelen;
if (len > MAX_READ_LEN) {
pr_err(PR_FMT "read len %d is too large\n", len);
return 0;
}
bytelen = len * 2;
memset(out, 0, bytelen);
memset(in, 0, bytelen);
if (max3110_write_then_read(max, (u8 *)out, (u8 *)in, bytelen, 1))
return 0;
/* If caller don't provide a buffer, then handle received char */
pbuf = buf ? buf : valid_str;
for (i = 0, j = 0; i < len; i++) {
if (in[i] & MAX3110_READ_DATA_AVAILABLE)
pbuf[j++] = (u8)(in[i] & 0xff);
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
return j;
}
/* Write a 16b word to the device */
static int max3110_out(struct uart_max3110 *max, const u16 out)
{
void *buf;
u16 *obuf, *ibuf;
int ret;
buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
if (!buf)
return -ENOMEM;
obuf = buf;
ibuf = buf + 4;
*obuf = out;
ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
if (ret) {
pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
__func__, ret, out);
goto exit;
}
receive_chars(max, ibuf, 1);
exit:
kfree(buf);
return ret;
}
/* Write a 16b word to the device */
static int max3110_out(struct uart_max3110 *max, const u16 out)
{
void *buf;
u16 *obuf, *ibuf;
u8 ch;
int ret;
buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
if (!buf)
return -ENOMEM;
obuf = buf;
ibuf = buf + 4;
*obuf = out;
ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
if (ret) {
pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n",
__func__, ret, out);
goto exit;
}
/* If some valid data is read back */
if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
ch = *ibuf & 0xff;
receive_chars(max, &ch, 1);
}
exit:
kfree(buf);
return ret;
}
static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
void *buf;
u16 *obuf, *ibuf;
u8 valid_str[WORDS_PER_XFER];
int i, j, len, blen, dma_size, left, ret = 0;
dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
if (!buf)
return;
obuf = buf;
ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = min(left, WORDS_PER_XFER);
blen = len * sizeof(u16);
memset(ibuf, 0, blen);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
/* Fail to send msg to console is not very critical */
ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
if (ret)
pr_warning(PR_FMT "%s(): get err msg %d\n",
__func__, ret);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
valid_str[j++] = ibuf[i] & 0xff;
}
if (j)
receive_chars(max, valid_str, j);
max->port.icount.tx += len;
left -= len;
}
}
kfree(buf);
}
/* Write a u16 to the device, and return one u16 read back */
int max3110_out(struct uart_max3110 *max, const u16 out)
{
u16 tmp;
int ret;
ret = max3110_write_then_read(max, (u8 *)&out, (u8 *)&tmp, 2, 1);
if (ret)
return ret;
/* If some valid data is read back */
if (tmp & MAX3110_READ_DATA_AVAILABLE)
receive_char(max, (tmp & 0xff));
return ret;
}
static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
void *buf;
u16 *obuf, *ibuf;
int i, len, blen, dma_size, left, ret = 0;
dma_size = M3110_RX_FIFO_DEPTH * sizeof(u16) * 2;
buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
if (!buf)
return;
obuf = buf;
ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = min(left, M3110_RX_FIFO_DEPTH);
blen = len * sizeof(u16);
memset(ibuf, 0, blen);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
/* Fail to send msg to console is not very critical */
ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
if (ret)
pr_warning(PR_FMT "%s(): get err msg %d\n",
__func__, ret);
receive_chars(max, ibuf, len);
max->port.icount.tx += len;
left -= len;
}
}
kfree(buf);
}
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out.
*
* Return how many valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
{
void *buf;
u16 *obuf, *ibuf;
u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
int i, j, blen;
blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
if (!buf) {
pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__);
return 0;
}
/* tx/rx always have the same length */
obuf = buf;
ibuf = buf + blen;
if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
kfree(buf);
return 0;
}
/* If caller doesn't provide a buffer, then handle received char */
pbuf = rxbuf ? rxbuf : valid_str;
for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
pbuf[j++] = ibuf[i] & 0xff;
}
if (j && (pbuf == valid_str))
receive_chars(max, valid_str, j);
kfree(buf);
return j;
}
static inline void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
int len, left = 0;
u16 obuf[WORDS_PER_XFER], ibuf[WORDS_PER_XFER];
u8 valid_str[WORDS_PER_XFER];
int i, j;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = (left >= WORDS_PER_XFER) ? WORDS_PER_XFER : left;
memset(obuf, 0, len * 2);
memset(ibuf, 0, len * 2);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
max3110_write_then_read(max, (u8 *)obuf,
(u8 *)ibuf, len * 2, 0);
for (i = 0, j = 0; i < len; i++) {
if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
valid_str[j++] = (u8)(ibuf[i] & 0xff);
}
if (j)
receive_chars(max, valid_str, j);
max->port.icount.tx += len;
left -= len;
}
}
}
static int serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
int ret;
unsigned char *buffer;
u16 res;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
/* set spi info */
spi->mode = SPI_MODE_0;
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
spi->controller_data = &spi0_uart;
spi_setup(spi);
max->port.type = PORT_PXA; /* need apply for a max3110 type */
max->port.fifosize = 2; /* only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
max->name = spi->modalias; /* use spi name as the name */
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
max->word_7bits = 0;
max->parity = 0;
max->baud = 0;
max->cur_conf = 0;
max->uart_flags = 0;
/* Check if reading configuration register returns something sane */
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
}
buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
max->con_xmit.buf = (unsigned char *)buffer;
max->con_xmit.head = max->con_xmit.tail = 0;
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
ret = PTR_ERR(max->main_thread);
goto err_kthread;
}
pmax = max;
/* give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
return 0;
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
pmax = NULL;
kfree(max);
return ret;
}
static int serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
void *buffer;
u16 res;
int ret = 0;
struct plat_max3110 *pdata = spi->dev.platform_data;
if (!pdata)
return -EINVAL;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
/* Set spi info */
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
spi_setup(spi);
max->port.type = PORT_MAX3100;
max->port.fifosize = 2; /* Only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
strcpy(max->name, spi->modalias);
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
mutex_init(&max->io_mutex);
max->word_7bits = 0;
max->parity = 0;
max->baud = 0;
max->cur_conf = 0;
max->uart_flags = 0;
/* Check if reading configuration register returns something sane */
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
}
buffer = (void *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
max->con_xmit.buf = buffer;
max->con_xmit.head = 0;
max->con_xmit.tail = 0;
init_waitqueue_head(&max->wq);
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
ret = PTR_ERR(max->main_thread);
goto err_kthread;
}
max->irq_edge_triggered = pdata->irq_edge_triggered;
if (max->irq > 0) {
if (max->irq_edge_triggered) {
ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
} else {
ret = request_threaded_irq(max->irq, NULL,
serial_m3110_irq,
IRQF_ONESHOT, "max3110", max);
}
if (ret) {
max->irq = 0;
dev_warn(&spi->dev,
"unable to allocate IRQ, will use polling method\n");
}
}
spi_set_drvdata(spi, max);
pmax = max;
/* Give membase a psudo value to pass serial_core's check */
max->port.membase = (void *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
return 0;
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
kfree(max);
return ret;
}
