static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
{
uint8_t comp = os.comp;
ulong load = os.load;
ulong blob_start = os.start;
ulong blob_end = os.end;
ulong image_start = os.image_start;
ulong image_len = os.image_len;
uint unc_len = CONFIG_SYS_BOOTM_LEN;
const char *type_name = genimg_get_type_name (os.type);
switch (comp) {
case IH_COMP_NONE:
if (load == blob_start) {
printf (" XIP %s ... ", type_name);
} else {
printf (" Loading %s ... ", type_name);
if (load != image_start) {
memmove_wd ((void *)load,
(void *)image_start, image_len, CHUNKSZ);
}
}
*load_end = load + image_len;
puts("OK\n");
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", type_name);
if (gunzip ((void *)load, unc_len,
(uchar *)image_start, &image_len) != 0) {
puts ("GUNZIP: uncompress, out-of-mem or overwrite error "
"- must RESET board to recover\n");
if (boot_progress)
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress ((char*)load,
&unc_len, (char *)image_start, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
if (boot_progress)
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA:
printf (" Uncompressing %s ... ", type_name);
int ret = lzmaBuffToBuffDecompress(
(unsigned char *)load, &unc_len,
(unsigned char *)image_start, image_len);
if (ret != SZ_OK) {
printf ("LZMA: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_LZMA */
default:
printf ("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
puts ("OK\n");
debug (" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
if (boot_progress)
show_boot_progress (7);
if ((load < blob_end) && (*load_end > blob_start)) {
debug ("images.os.start = 0x%lX, images.os.end = 0x%lx\n", blob_start, blob_end);
debug ("images.os.load = 0x%lx, load_end = 0x%lx\n", load, *load_end);
return BOOTM_ERR_OVERLAP;
}
return 0;
}
static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,
int boot_progress)
{
image_info_t os = images->os;
uint8_t comp = os.comp;
ulong load = os.load;
ulong blob_start = os.start;
ulong blob_end = os.end;
ulong image_start = os.image_start;
ulong image_len = os.image_len;
__maybe_unused uint unc_len = CONFIG_SYS_BOOTM_LEN;
int no_overlap = 0;
void *load_buf, *image_buf;
#if defined(CONFIG_LZMA) || defined(CONFIG_LZO)
int ret;
#endif /* defined(CONFIG_LZMA) || defined(CONFIG_LZO) */
const char *type_name = genimg_get_type_name(os.type);
load_buf = map_sysmem(load, unc_len);
image_buf = map_sysmem(image_start, image_len);
switch (comp) {
case IH_COMP_NONE:
if (load == image_start) {
printf(" XIP %s ... ", type_name);
no_overlap = 1;
} else {
printf(" Loading %s ... ", type_name);
memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
}
*load_end = load + image_len;
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf(" Uncompressing %s ... ", type_name);
if (gunzip(load_buf, unc_len, image_buf, &image_len) != 0) {
puts("GUNZIP: uncompress, out-of-mem or overwrite "
"error - must RESET board to recover\n");
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf(" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress(load_buf, &unc_len,
image_buf, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA: {
SizeT lzma_len = unc_len;
printf(" Uncompressing %s ... ", type_name);
ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
image_buf, image_len);
unc_len = lzma_len;
if (ret != SZ_OK) {
printf("LZMA: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
}
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO: {
size_t size = unc_len;
printf(" Uncompressing %s ... ", type_name);
ret = lzop_decompress(image_buf, image_len, load_buf, &size);
if (ret != LZO_E_OK) {
printf("LZO: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + size;
break;
}
#endif /* CONFIG_LZO */
default:
printf("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
flush_cache(load, (*load_end - load) * sizeof(ulong));
puts("OK\n");
debug(" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
bootstage_mark(BOOTSTAGE_ID_KERNEL_LOADED);
if (!no_overlap && (load < blob_end) && (*load_end > blob_start)) {
debug("images.os.start = 0x%lX, images.os.end = 0x%lx\n",
blob_start, blob_end);
debug("images.os.load = 0x%lx, load_end = 0x%lx\n", load,
*load_end);
/* Check what type of image this is. */
if (images->legacy_hdr_valid) {
if (image_get_type(&images->legacy_hdr_os_copy)
== IH_TYPE_MULTI)
puts("WARNING: legacy format multi component image overwritten\n");
return BOOTM_ERR_OVERLAP;
} else {
puts("ERROR: new format image overwritten - must RESET the board to recover\n");
bootstage_error(BOOTSTAGE_ID_OVERWRITTEN);
return BOOTM_ERR_RESET;
}
}
return 0;
}
static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
{
uint8_t comp = os.comp;
ulong load = os.load;
ulong blob_start = os.start;
ulong blob_end = os.end;
ulong image_start = os.image_start;
ulong image_len = os.image_len;
__maybe_unused uint unc_len = CONFIG_SYS_BOOTM_LEN;
int no_overlap = 0;
#if defined(CONFIG_LZMA) || defined(CONFIG_LZO)
int ret;
#endif /* defined(CONFIG_LZMA) || defined(CONFIG_LZO) */
const char *type_name = genimg_get_type_name(os.type);
switch (comp) {
case IH_COMP_NONE:
if (load == blob_start || load == image_start) {
printf(" XIP %s ... ", type_name);
no_overlap = 1;
} else {
printf(" Loading %s ... ", type_name);
memmove_wd((void *)load, (void *)image_start,
image_len, CHUNKSZ);
}
*load_end = load + image_len;
puts("OK\n");
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf(" Uncompressing %s ... ", type_name);
if (gunzip((void *)load, unc_len,
(uchar *)image_start, &image_len) != 0) {
puts("GUNZIP: uncompress, out-of-mem or overwrite "
"error - must RESET board to recover\n");
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf(" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress((char *)load,
&unc_len, (char *)image_start, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA: {
SizeT lzma_len = unc_len;
printf(" Uncompressing %s ... ", type_name);
ret = lzmaBuffToBuffDecompress(
(unsigned char *)load, &lzma_len,
(unsigned char *)image_start, image_len);
unc_len = lzma_len;
if (ret != SZ_OK) {
printf("LZMA: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
}
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO:
printf(" Uncompressing %s ... ", type_name);
ret = lzop_decompress((const unsigned char *)image_start,
image_len, (unsigned char *)load,
&unc_len);
if (ret != LZO_E_OK) {
printf("LZO: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_LZO */
default:
printf("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
flush_cache(load, (*load_end - load) * sizeof(ulong));
puts("OK\n");
debug(" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
bootstage_mark(BOOTSTAGE_ID_KERNEL_LOADED);
if (!no_overlap && (load < blob_end) && (*load_end > blob_start)) {
debug("images.os.start = 0x%lX, images.os.end = 0x%lx\n",
blob_start, blob_end);
debug("images.os.load = 0x%lx, load_end = 0x%lx\n", load,
*load_end);
return BOOTM_ERR_OVERLAP;
}
return 0;
}
/**
* decomp_image() - decompress the operating system
*
* @comp: Compression algorithm that is used (IH_COMP_...)
* @load: Destination load address in U-Boot memory
* @image_start Image start address (where we are decompressing from)
* @type: OS type (IH_OS_...)
* @load_bug: Place to decompress to
* @image_buf: Address to decompress from
* @return 0 if OK, -ve on error (BOOTM_ERR_...)
*/
static int decomp_image(int comp, ulong load, ulong image_start, int type,
void *load_buf, void *image_buf, ulong image_len,
ulong *load_end)
{
const char *type_name = genimg_get_type_name(type);
__attribute__((unused)) uint unc_len = CONFIG_SYS_BOOTM_LEN;
*load_end = load;
switch (comp) {
case IH_COMP_NONE:
if (load == image_start) {
printf(" XIP %s ... ", type_name);
} else {
printf(" Loading %s ... ", type_name);
memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
}
*load_end = load + image_len;
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf(" Uncompressing %s ... ", type_name);
if (gunzip(load_buf, unc_len, image_buf, &image_len) != 0) {
puts("GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover\n");
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf(" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress(load_buf, &unc_len,
image_buf, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf("BUNZIP2: uncompress or overwrite error %d - must RESET board to recover\n",
i);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA: {
SizeT lzma_len = unc_len;
int ret;
printf(" Uncompressing %s ... ", type_name);
ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
image_buf, image_len);
unc_len = lzma_len;
if (ret != SZ_OK) {
printf("LZMA: uncompress or overwrite error %d - must RESET board to recover\n",
ret);
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
}
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO: {
size_t size = unc_len;
int ret;
printf(" Uncompressing %s ... ", type_name);
ret = lzop_decompress(image_buf, image_len, load_buf, &size);
if (ret != LZO_E_OK) {
printf("LZO: uncompress or overwrite error %d - must RESET board to recover\n",
ret);
return BOOTM_ERR_RESET;
}
*load_end = load + size;
break;
}
#endif /* CONFIG_LZO */
default:
printf("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
puts("OK\n");
return 0;
}
/**
* boot_ramdisk_high - relocate init ramdisk
* @lmb: pointer to lmb handle, will be used for memory mgmt
* @rd_data: ramdisk data start address
* @rd_len: ramdisk data length
* @initrd_start: pointer to a ulong variable, will hold final init ramdisk
* start address (after possible relocation)
* @initrd_end: pointer to a ulong variable, will hold final init ramdisk
* end address (after possible relocation)
*
* boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
* variable and if requested ramdisk data is moved to a specified location.
*
* Initrd_start and initrd_end are set to final (after relocation) ramdisk
* start/end addresses if ramdisk image start and len were provided,
* otherwise set initrd_start and initrd_end set to zeros.
*
* returns:
* 0 - success
* -1 - failure
*/
int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
ulong *initrd_start, ulong *initrd_end)
{
char *s;
ulong initrd_high;
int initrd_copy_to_ram = 1;
if ((s = getenv("initrd_high")) != NULL) {
/* a value of "no" or a similar string will act like 0,
* turning the "load high" feature off. This is intentional.
*/
initrd_high = simple_strtoul(s, NULL, 16);
if (initrd_high == ~0)
initrd_copy_to_ram = 0;
} else {
/* not set, no restrictions to load high */
initrd_high = ~0;
}
#ifdef CONFIG_LOGBUFFER
/* Prevent initrd from overwriting logbuffer */
lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
#endif
debug("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
initrd_high, initrd_copy_to_ram);
if (rd_data) {
if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
debug(" in-place initrd\n");
*initrd_start = rd_data;
*initrd_end = rd_data + rd_len;
lmb_reserve(lmb, rd_data, rd_len);
} else {
if (initrd_high)
*initrd_start = (ulong)lmb_alloc_base(lmb,
rd_len, 0x1000, initrd_high);
else
*initrd_start = (ulong)lmb_alloc(lmb, rd_len,
0x1000);
if (*initrd_start == 0) {
puts("ramdisk - allocation error\n");
goto error;
}
bootstage_mark(BOOTSTAGE_ID_COPY_RAMDISK);
*initrd_end = *initrd_start + rd_len;
printf(" Loading Ramdisk to %08lx, end %08lx ... ",
*initrd_start, *initrd_end);
memmove_wd((void *)*initrd_start,
(void *)rd_data, rd_len, CHUNKSZ);
#ifdef CONFIG_MP
/*
* Ensure the image is flushed to memory to handle
* AMP boot scenarios in which we might not be
* HW cache coherent
*/
flush_cache((unsigned long)*initrd_start, rd_len);
#endif
puts("OK\n");
}
} else {
*initrd_start = 0;
*initrd_end = 0;
}
debug(" ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n",
*initrd_start, *initrd_end);
return 0;
error:
return -1;
}
static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
{
uint8_t comp = os.comp;
ulong load = os.load;
ulong blob_start = os.start;
ulong blob_end = os.end;
ulong image_start = os.image_start;
ulong image_len = os.image_len;
#if defined(CONFIG_GZIP) || defined(CONFIG_BZIP2) \
|| defined(CONFIG_LZMA) || defined(CONFIG_LZO)
uint unc_len = CONFIG_SYS_BOOTM_LEN;
#endif
ulong image_end;
const char *type_name = genimg_get_type_name (os.type);
int boot_sp;
__asm__ __volatile__(
"mov %0, sp\n"
:"=r"(boot_sp)
:
:"cc"
);
/* Check whether kernel zImage overwrite uboot,
* which will lead to kernel boot fail. */
image_end = load + image_len;
/* leave at most 32KByte for move image stack */
boot_sp -= BOOTM_STACK_GUARD;
if( !((load > _bss_end) || (image_end < boot_sp)) ) {
printf("\nkernel image will overwrite uboot! kernel boot fail!\n");
return BOOTM_ERR_RESET;
}
switch (comp) {
case IH_COMP_NONE:
if (load == blob_start || load == image_start) {
printf (" XIP %s ... ", type_name);
} else {
printf (" Loading %s ... ", type_name);
memmove_wd ((void *)load, (void *)image_start,
image_len, CHUNKSZ);
}
*load_end = load + image_len;
puts("OK\n");
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", type_name);
if (gunzip ((void *)load, unc_len,
(uchar *)image_start, &image_len) != 0) {
puts ("GUNZIP: uncompress, out-of-mem or overwrite error "
"- must RESET board to recover\n");
if (boot_progress)
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress ((char*)load,
&unc_len, (char *)image_start, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
if (boot_progress)
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA:
printf (" Uncompressing %s ... ", type_name);
int ret = lzmaBuffToBuffDecompress(
(unsigned char *)load, &unc_len,
(unsigned char *)image_start, image_len);
if (ret != SZ_OK) {
printf ("LZMA: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO:
printf (" Uncompressing %s ... ", type_name);
int ret = lzop_decompress((const unsigned char *)image_start,
image_len, (unsigned char *)load,
&unc_len);
if (ret != LZO_E_OK) {
printf ("LZO: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
if (boot_progress)
show_boot_progress (-6);
return BOOTM_ERR_RESET;
}
*load_end = load + unc_len;
break;
#endif /* CONFIG_LZO */
default:
printf ("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
puts ("OK\n");
debug (" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
if (boot_progress)
show_boot_progress (7);
if ((load < blob_end) && (*load_end > blob_start)) {
debug ("images.os.start = 0x%lX, images.os.end = 0x%lx\n", blob_start, blob_end);
debug ("images.os.load = 0x%lx, load_end = 0x%lx\n", load, *load_end);
return BOOTM_ERR_OVERLAP;
}
return 0;
}
int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
void *load_buf, void *image_buf, ulong image_len,
uint unc_len, ulong *load_end)
{
int ret = 0;
*load_end = load;
print_decomp_msg(comp, type, load == image_start);
/*
* Load the image to the right place, decompressing if needed. After
* this, image_len will be set to the number of uncompressed bytes
* loaded, ret will be non-zero on error.
*/
switch (comp) {
case IH_COMP_NONE:
if (load == image_start)
break;
if (image_len <= unc_len)
memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
else
ret = 1;
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP: {
ret = gunzip(load_buf, unc_len, image_buf, &image_len);
break;
}
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2: {
uint size = unc_len;
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
image_buf, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
image_len = size;
break;
}
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA: {
SizeT lzma_len = unc_len;
ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
image_buf, image_len);
image_len = lzma_len;
break;
}
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO: {
size_t size = unc_len;
ret = lzop_decompress(image_buf, image_len, load_buf, &size);
image_len = size;
break;
}
#endif /* CONFIG_LZO */
default:
printf("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
if (ret)
return handle_decomp_error(comp, image_len, unc_len, ret);
*load_end = load + image_len;
puts("OK\n");
return 0;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
image_header_t *hdr;
ulong addr;
ulong iflag;
const char *type_name;
uint unc_len = CONFIG_SYS_BOOTM_LEN;
uint8_t comp, type, os;
void *os_hdr;
ulong os_data, os_len;
ulong image_start, image_end;
ulong load_start, load_end;
ulong mem_start;
phys_size_t mem_size;
struct lmb lmb;
#if defined(CONFIG_SECURE_BOOT)
int rv;
#endif
#if defined(CONFIG_SECURE_BOOT)
rv = Check_Signature( (SecureBoot_CTX *)SECURE_BOOT_CONTEXT_ADDR,
(unsigned char*)CONFIG_SECURE_KERNEL_BASE,
CONFIG_SECURE_KERNEL_SIZE-128,
(unsigned char*)(CONFIG_SECURE_KERNEL_BASE+CONFIG_SECURE_KERNEL_SIZE-128),
128 );
if(rv != SB_OK) {
printf("Kernel Integrity check fail\nSystem Halt....");
while(1);
}
printf("Kernel Integirty check success.\n");
rv = Check_Signature( (SecureBoot_CTX *)SECURE_BOOT_CONTEXT_ADDR,
(unsigned char*)CONFIG_SECURE_ROOTFS_BASE,
CONFIG_SECURE_ROOTFS_SIZE-128,
(unsigned char*)(CONFIG_SECURE_ROOTFS_BASE+CONFIG_SECURE_ROOTFS_SIZE-128),
128 );
if(rv != SB_OK) {
printf("rootfs Integrity check fail\nSystem Halt....");
while(1);
}
printf("rootfs Integirty check success.\n");
#endif
memset ((void *)&images, 0, sizeof (images));
images.verify = getenv_yesno ("verify");
// images.lmb = &lmb;
memcpy (&images.lmb, &lmb, sizeof(struct lmb));
lmb_init(&lmb);
mem_start = getenv_bootm_low();
mem_size = getenv_bootm_size();
lmb_add(&lmb, (phys_addr_t)mem_start, mem_size);
board_lmb_reserve(&lmb);
#ifdef CONFIG_ZIMAGE_BOOT
#define LINUX_ZIMAGE_MAGIC 0x016f2818
/* find out kernel image address */
if (argc < 2) {
addr = load_addr;
debug ("* kernel: default image load address = 0x%08lx\n",
load_addr);
} else {
addr = simple_strtoul(argv[1], NULL, 16);
//debug ("* kernel: cmdline image address = 0x%08lx\n", img_addr);
}
if (*(ulong *)(addr + 9*4) == LINUX_ZIMAGE_MAGIC) {
printf("Boot with zImage\n");
addr = virt_to_phys(addr);
hdr = (image_header_t *)addr;
hdr->ih_os = IH_OS_LINUX;
hdr->ih_ep = ntohl(addr);
memmove (&images.legacy_hdr_os_copy, hdr, sizeof(image_header_t));
/* save pointer to image header */
images.legacy_hdr_os = hdr;
images.legacy_hdr_valid = 1;
goto after_header_check;
}
#endif
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel (cmdtp, flag, argc, argv,
&images, &os_data, &os_len);
if (os_len == 0) {
puts ("ERROR: can't get kernel image!\n");
return 1;
}
/* get image parameters */
switch (genimg_get_format (os_hdr)) {
case IMAGE_FORMAT_LEGACY:
type = image_get_type (os_hdr);
comp = image_get_comp (os_hdr);
os = image_get_os (os_hdr);
image_end = image_get_image_end (os_hdr);
load_start = image_get_load (os_hdr);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
if (fit_image_get_type (images.fit_hdr_os,
images.fit_noffset_os, &type)) {
puts ("Can't get image type!\n");
show_boot_progress (-109);
return 1;
}
if (fit_image_get_comp (images.fit_hdr_os,
images.fit_noffset_os, &comp)) {
puts ("Can't get image compression!\n");
show_boot_progress (-110);
return 1;
}
if (fit_image_get_os (images.fit_hdr_os,
images.fit_noffset_os, &os)) {
puts ("Can't get image OS!\n");
show_boot_progress (-111);
return 1;
}
image_end = fit_get_end (images.fit_hdr_os);
if (fit_image_get_load (images.fit_hdr_os, images.fit_noffset_os,
&load_start)) {
puts ("Can't get image load address!\n");
show_boot_progress (-112);
return 1;
}
break;
#endif
default:
puts ("ERROR: unknown image format type!\n");
return 1;
}
image_start = (ulong)os_hdr;
load_end = 0;
type_name = genimg_get_type_name (type);
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
* bios emulation, so turn them off again
*/
icache_disable();
invalidate_l1_instruction_cache();
flush_data_cache();
dcache_disable();
#endif
switch (comp) {
case IH_COMP_NONE:
if (load_start == (ulong)os_hdr) {
printf (" XIP %s ... ", type_name);
} else {
printf (" Loading %s ... ", type_name);
memmove_wd ((void *)load_start,
(void *)os_data, os_len, CHUNKSZ);
}
load_end = load_start + os_len;
puts("OK\n");
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", type_name);
if (gunzip ((void *)load_start, unc_len,
(uchar *)os_data, &os_len) != 0) {
puts ("GUNZIP: uncompress or overwrite error "
"- must RESET board to recover\n");
show_boot_progress (-6);
do_reset (cmdtp, flag, argc, argv);
}
load_end = load_start + os_len;
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", type_name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
int i = BZ2_bzBuffToBuffDecompress ((char*)load_start,
&unc_len, (char *)os_data, os_len,
CFG_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2: uncompress or overwrite error %d "
"- must RESET board to recover\n", i);
show_boot_progress (-6);
do_reset (cmdtp, flag, argc, argv);
}
load_end = load_start + unc_len;
break;
#endif /* CONFIG_BZIP2 */
default:
if (iflag)
enable_interrupts();
printf ("Unimplemented compression type %d\n", comp);
show_boot_progress (-7);
return 1;
}
puts ("OK\n");
debug (" kernel loaded at 0x%08lx, end = 0x%08lx\n", load_start, load_end);
show_boot_progress (7);
if ((load_start < image_end) && (load_end > image_start)) {
debug ("image_start = 0x%lX, image_end = 0x%lx\n", image_start, image_end);
debug ("load_start = 0x%lx, load_end = 0x%lx\n", load_start, load_end);
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
show_boot_progress (8);
lmb_reserve(&lmb, load_start, (load_end - load_start));
#if defined(CONFIG_ZIMAGE_BOOT)
after_header_check:
os = hdr->ih_os;
#endif
switch (os) {
default: /* handled by (original) Linux case */
case IH_OS_LINUX:
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
do_bootm_linux (flag, argc, argv, &images);
break;
#ifdef CONFIG_BOOTM_NETBSD
case IH_OS_NETBSD:
do_bootm_netbsd (flag, argc, argv, &images);
break;
#endif
#ifdef CONFIG_LYNXKDI
case IH_OS_LYNXOS:
do_bootm_lynxkdi (flag, argc, argv, &images);
break;
#endif
#ifdef CONFIG_BOOTM_RTEMS
case IH_OS_RTEMS:
do_bootm_rtems (flag, argc, argv, &images);
break;
#endif
/*
#if defined(CONFIG_CMD_ELF)
case IH_OS_VXWORKS:
do_bootm_vxworks (cmdtp, flag, argc, argv, &images);
break;
case IH_OS_QNX:
do_bootm_qnxelf (cmdtp, flag, argc, argv, &images);
break;
#endif
*/
#ifdef CONFIG_ARTOS
case IH_OS_ARTOS:
do_bootm_artos (cmdtp, flag, argc, argv, &images);
break;
#endif
}
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
do_reset (cmdtp, flag, argc, argv);
#endif
if (iflag)
enable_interrupts();
return 1;
}
int bootm_image(const image_header_t *header)
{
const char * failure = NULL;
const char * type_name = NULL;
uint32_t load, image_start, image_len;
/* Display to standard output the image contents. */
image_print_contents(header);
/* Validate the image header and image data CRCs */
puts(" Verifying Checksum ... ");
{
if (!image_check_hcrc(header)) {
failure = "Header Invalid\n";
goto fail;
}
if (!image_check_dcrc(header)) {
failure = "Data Invalid\n";
goto fail;
}
}
puts("OK\n");
/* We ONLY support uncompressed ARM U-Boot firmware images. Check
* to make sure that's what we are going to boot.
*/
if (!image_check_type(header, IH_TYPE_FIRMWARE)) {
failure = "Image is not a firmware image\n";
goto fail;
}
if (!image_check_os(header, IH_OS_U_BOOT)) {
failure = "Image is not u-boot firmware\n";
goto fail;
}
if (image_get_comp(header) != IH_COMP_NONE) {
failure = "Image is compressed\n";
goto fail;
}
if (!image_check_target_arch(header)) {
failure = "Image is not built for this processor\n";
goto fail;
}
type_name = genimg_get_type_name(image_get_type(header));
printf(" Loading %s ... ", type_name);
{
load = image_get_load(header);
image_start = image_get_data(header);
image_len = image_get_data_size(header);
memmove_wd((void *)load, (void *)image_start, image_len, CHUNKSZ);
}
puts("OK\n");
/* This should never return. */
exec(load, type_name);
/* However, if it does, return failed status. */
fail:
puts(failure);
return (BOOTM_STATUS_FAILURE);
}
static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
{
uint8_t comp = os.comp;
ulong load = os.load;
ulong blob_start = os.start;
ulong blob_end = os.end;
ulong image_start = os.image_start;
ulong image_len = os.image_len;
__maybe_unused uint unc_len = CONFIG_SYS_BOOTM_LEN;
int no_overlap = 0;
void *load_buf, *image_buf;
const char *type_name = genimg_get_type_name(os.type);
load_buf = map_sysmem(load, image_len);
image_buf = map_sysmem(image_start, image_len);
switch (comp) {
case IH_COMP_NONE:
if (load == blob_start || load == image_start) {
printf(" XIP %s ... ", type_name);
no_overlap = 1;
} else {
printf(" Loading %s ... ", type_name);
memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
}
*load_end = load + image_len;
puts("OK\n");
break;
#ifdef CONFIG_GZIP
case IH_COMP_GZIP:
printf(" Uncompressing %s ... ", type_name);
if (gunzip(load_buf, unc_len, image_buf, &image_len) != 0) {
puts("GUNZIP: uncompress, out-of-mem or overwrite "
"error - must RESET board to recover\n");
if (boot_progress)
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return BOOTM_ERR_RESET;
}
*load_end = load + image_len;
break;
#endif /* CONFIG_GZIP */
default:
printf("Unimplemented compression type %d\n", comp);
return BOOTM_ERR_UNIMPLEMENTED;
}
flush_cache(load, (*load_end - load) * sizeof(ulong));
puts("OK\n");
debug(" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
bootstage_mark(BOOTSTAGE_ID_KERNEL_LOADED);
if (!no_overlap && (load < blob_end) && (*load_end > blob_start)) {
debug("images.os.start = 0x%lX, images.os.end = 0x%lx\n",
blob_start, blob_end);
debug("images.os.load = 0x%lx, load_end = 0x%lx\n", load,
*load_end);
return BOOTM_ERR_OVERLAP;
}
return 0;
}
