コード例 #1
0
static void __init mop500_init_machine(void)
{
	int i2c0_devs;

	/*
	 * The HREFv60 board removed a GPIO expander and routed
	 * all these GPIO pins to the internal GPIO controller
	 * instead.
	 */
	if (machine_is_hrefv60())
		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
	else
		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;

	u8500_init_devices();

	mop500_pins_init();

	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

	mop500_i2c_init();
	mop500_sdi_init();
	mop500_spi_init();
	mop500_uart_init();

	platform_device_register(&ab8500_device);

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
	if (machine_is_hrefv60())
		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));
}
コード例 #2
0
ファイル: board-mop500.c プロジェクト: DJHartley/linux
static void __init mop500_init_machine(void)
{
	struct device *parent = NULL;
	int i2c0_devs;
	int i;

	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;

	mop500_pinmaps_init();
	parent = u8500_init_devices(&ab8500_platdata);

	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
		mop500_platform_devs[i]->dev.parent = parent;

	platform_add_devices(mop500_platform_devs,
			ARRAY_SIZE(mop500_platform_devs));

	mop500_i2c_init(parent);
	mop500_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_audio_init(parent);
	mop500_uart_init(parent);

	u8500_cryp1_hash1_init(parent);

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #3
0
ファイル: board-mop500.c プロジェクト: 03199618/linux
static void __init snowball_init_machine(void)
{
	struct device *parent = NULL;
	int i;

	platform_device_register(&db8500_prcmu_device);

	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;

	snowball_pinmaps_init();
	parent = u8500_init_devices();

	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
		snowball_platform_devs[i]->dev.parent = parent;

	platform_add_devices(snowball_platform_devs,
			ARRAY_SIZE(snowball_platform_devs));

	mop500_i2c_init(parent);
	snowball_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_audio_init(parent);
	mop500_uart_init(parent);

	u8500_cryp1_hash1_init(parent);

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #4
0
ファイル: board-mop500.c プロジェクト: 03199618/linux
static void __init hrefv60_init_machine(void)
{
	struct device *parent = NULL;
	int i;

	platform_device_register(&db8500_prcmu_device);
	/*
	 * The HREFv60 board removed a GPIO expander and routed
	 * all these GPIO pins to the internal GPIO controller
	 * instead.
	 */
	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;

	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;

	hrefv60_pinmaps_init();
	parent = u8500_init_devices();

	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
		mop500_platform_devs[i]->dev.parent = parent;

	platform_add_devices(mop500_platform_devs,
			ARRAY_SIZE(mop500_platform_devs));

	mop500_i2c_init(parent);
	hrefv60_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_audio_init(parent);
	mop500_uart_init(parent);

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #5
0
static void __init snowball_init_machine(void)
{
	struct device *parent = NULL;
	int i2c0_devs;
	int i;

	parent = u8500_init_devices();

	snowball_pins_init();

	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
		snowball_platform_devs[i]->dev.parent = parent;

	platform_add_devices(snowball_platform_devs,
			ARRAY_SIZE(snowball_platform_devs));

	mop500_i2c_init(parent);
	snowball_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_uart_init(parent);

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #6
0
ファイル: board-mop500.c プロジェクト: chrisglass/linux
static void __init hrefv60_init_machine(void)
{
	int i2c0_devs;

	/*
	 * The HREFv60 board removed a GPIO expander and routed
	 * all these GPIO pins to the internal GPIO controller
	 * instead.
	 */
	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;

	u8500_init_devices();

	hrefv60_pins_init();

	platform_add_devices(mop500_platform_devs,
			ARRAY_SIZE(mop500_platform_devs));

	mop500_i2c_init();
	hrefv60_sdi_init();
	mop500_spi_init();
	mop500_uart_init();

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);

	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #7
0
ファイル: board-mop500.c プロジェクト: chrisglass/linux
static void __init mop500_init_machine(void)
{
	int i2c0_devs;

	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;

	u8500_init_devices();

	mop500_pins_init();

	platform_add_devices(mop500_platform_devs,
			ARRAY_SIZE(mop500_platform_devs));

	mop500_i2c_init();
	mop500_sdi_init();
	mop500_spi_init();
	mop500_uart_init();

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #8
0
static void __init u8500_init_machine(void)
{
	struct device *parent = NULL;
	int i2c0_devs;
	int i;

	parent = u8500_init_devices();
	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);

	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
		mop500_platform_devs[i]->dev.parent = parent;
	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
		snowball_platform_devs[i]->dev.parent = parent;

	/* automatically probe child nodes of db8500 device */
	of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);

	if (of_machine_is_compatible("st-ericsson,mop500")) {
		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
		mop500_pins_init();

		platform_add_devices(mop500_platform_devs,
				ARRAY_SIZE(mop500_platform_devs));

		mop500_sdi_init(parent);
	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
		snowball_pins_init();
		platform_add_devices(snowball_platform_devs,
				ARRAY_SIZE(snowball_platform_devs));

		snowball_sdi_init(parent);
	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
		/*
		 * The HREFv60 board removed a GPIO expander and routed
		 * all these GPIO pins to the internal GPIO controller
		 * instead.
		 */
		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
		hrefv60_pins_init();
		platform_add_devices(mop500_platform_devs,
				ARRAY_SIZE(mop500_platform_devs));

		hrefv60_sdi_init(parent);
	}
	mop500_i2c_init(parent);

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #9
0
ファイル: board-mop500.c プロジェクト: AmesianX/netlink-mmap
static void __init hrefv60_init_machine(void)
{
	struct device *parent = NULL;
	int i2c0_devs;
	int i;

	/*
	 * The HREFv60 board removed a GPIO expander and routed
	 * all these GPIO pins to the internal GPIO controller
	 * instead.
	 */
	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;

	hrefv60_pinmaps_init();
	parent = u8500_init_devices(&ab8500_platdata);

	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
		mop500_platform_devs[i]->dev.parent = parent;

	platform_add_devices(mop500_platform_devs,
			ARRAY_SIZE(mop500_platform_devs));

	mop500_i2c_init(parent);
	hrefv60_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_msp_init(parent);
	mop500_uart_init(parent);

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);

	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();

	mop500_uib_init();
}
コード例 #10
0
ファイル: board-mop500.c プロジェクト: DJHartley/linux
static void __init snowball_init_machine(void)
{
	struct device *parent = NULL;
	int i;

	snowball_pinmaps_init();
	parent = u8500_init_devices(&ab8500_platdata);

	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
		snowball_platform_devs[i]->dev.parent = parent;

	platform_add_devices(snowball_platform_devs,
			ARRAY_SIZE(snowball_platform_devs));

	mop500_i2c_init(parent);
	snowball_sdi_init(parent);
	mop500_spi_init(parent);
	mop500_audio_init(parent);
	mop500_uart_init(parent);

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #11
0
ファイル: board-mop500.c プロジェクト: chrisglass/linux
static void __init snowball_init_machine(void)
{
	int i2c0_devs;

	u8500_init_devices();

	snowball_pins_init();

	platform_add_devices(snowball_platform_devs,
			ARRAY_SIZE(snowball_platform_devs));

	mop500_i2c_init();
	snowball_sdi_init();
	mop500_spi_init();
	mop500_uart_init();

	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
	i2c_register_board_info(2, mop500_i2c2_devices,
				ARRAY_SIZE(mop500_i2c2_devices));

	/* This board has full regulator constraints */
	regulator_has_full_constraints();
}
コード例 #12
0
static void __init mop500_init_machine(void)
{
	device_gpio_cfg();
	accessory_detect_config();

#ifdef CONFIG_REGULATOR
	platform_device_register(&u8500_regulator_dev);
#endif

	u8500_init_devices();

#ifdef CONFIG_USB_ANDROID
	fetch_usb_serial_no(USB_SERIAL_NUMBER_LEN);
#endif

	platform_add_devices(platform_devs,
			ARRAY_SIZE(platform_devs));

	mop500_pins_init();
	u8500_cryp1_hash1_init();

	platform_device_register(&ux500_ab8500_device);

#ifdef CONFIG_MFD_CG2900
#ifdef CONFIG_MFD_CG2900_TEST
	dcg2900_init_platdata(&cg2900_test_platform_data);
#endif /* CONFIG_MFD_CG2900_TEST */
#ifdef CONFIG_MFD_CG2900_UART
	dcg2900_init_platdata(&cg2900_uart_platform_data);
#endif /* CONFIG_MFD_CG2900_UART */

	platform_device_register(&ux500_cg2900_device);
#ifdef CONFIG_MFD_CG2900_UART
	if (pins_for_u9500()) {
		ux500_cg2900_uart_device.num_resources =
				ARRAY_SIZE(cg2900_uart_resources_u9500);
		ux500_cg2900_uart_device.resource =
				cg2900_uart_resources_u9500;
	} else if (machine_is_hrefv60()) {
		ux500_cg2900_uart_device.num_resources =
				ARRAY_SIZE(cg2900_uart_resources);
		ux500_cg2900_uart_device.resource =
				cg2900_uart_resources;
	} else {
		ux500_cg2900_uart_device.num_resources =
				ARRAY_SIZE(cg2900_uart_resources_pre_v60);
		ux500_cg2900_uart_device.resource =
				cg2900_uart_resources_pre_v60;
	}

	platform_device_register(&ux500_cg2900_uart_device);
#endif /* CONFIG_MFD_CG2900_UART */
#ifdef CONFIG_MFD_CG2900_TEST
	platform_device_register(&ux500_cg2900_test_device);
#endif /* CONFIG_MFD_CG2900_TEST */
#ifdef CONFIG_MFD_CG2900_CHIP
	platform_device_register(&ux500_cg2900_chip_device);
#endif /* CONFIG_MFD_CG2900_CHIP */
#ifdef CONFIG_MFD_STLC2690_CHIP
	platform_device_register(&ux500_stlc2690_chip_device);
#endif /* CONFIG_MFD_STLC2690_CHIP */
#endif /* CONFIG_MFD_CG2900 */

	mop500_i2c_init();
	mop500_msp_init();
	mop500_spi_init();
	mop500_uart_init();
	mop500_wlan_init();

	db8500_add_ske_keypad(&mop500_ske_keypad_data);

#ifdef CONFIG_HSI
	hsi_register_board_info(u8500_hsi_devices,
				ARRAY_SIZE(u8500_hsi_devices));
#endif

#ifdef CONFIG_MOP500_NUIB
	mop500_nuib_init();
#endif

#ifdef CONFIG_ANDROID_STE_TIMED_VIBRA
	mop500_vibra_init();
#endif

	platform_add_devices(u8500_platform_devices,
			     ARRAY_SIZE(u8500_platform_devices));
}