C++ (Cpp) mpt_print_reply_hdrの例

コード例 #1

ファイル: mpt_debug.c プロジェクト: MarginC/kame

static void
mpt_print_init_reply(MSG_IOC_INIT_REPLY *msg)
{
	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
	printf("\tWhoInit       %s\n", mpt_who(msg->WhoInit));
	printf("\tMaxDevices    0x%02x\n", msg->MaxDevices);
	printf("\tMaxBuses     0x%02x\n", msg->MaxBuses);
}

コード例 #2

ファイル: mpt_debug.c プロジェクト: 2trill2spill/freebsd

static void
mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *msg)
{

	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
	printf("\tEvent:        %s\n", mpt_ioc_event(msg->Event));
	printf("\tEventContext  0x%04x\n", msg->EventContext);
	printf("\tAckRequired     %d\n", msg->AckRequired);
	printf("\tEventDataLength %d\n", msg->EventDataLength);
	printf("\tContinuation    %d\n", msg->MsgFlags & 0x80);
	switch(msg->Event) {
	case MPI_EVENT_LOG_DATA:
		printf("\tEvtLogData:   0x%04x\n", msg->Data[0]);
		break;

	case MPI_EVENT_UNIT_ATTENTION:
		printf("\tTargetID:     0x%04x\n",
			msg->Data[0] & 0xff);
		printf("\tBus:          0x%04x\n",
			(msg->Data[0] >> 8) & 0xff);
		break;

	case MPI_EVENT_IOC_BUS_RESET:
	case MPI_EVENT_EXT_BUS_RESET:
	case MPI_EVENT_RESCAN:
		printf("\tPort:           %d\n",
			(msg->Data[0] >> 8) & 0xff);
		break;

	case MPI_EVENT_LINK_STATUS_CHANGE:
		printf("\tLinkState:    %d\n",
			msg->Data[0] & 0xff);
		printf("\tPort:         %d\n",
			(msg->Data[1] >> 8) & 0xff);
		break;

	case MPI_EVENT_LOOP_STATE_CHANGE:
		printf("\tType:         %d\n",
			(msg->Data[0] >> 16) & 0xff);
		printf("\tChar3:      0x%02x\n",
			(msg->Data[0] >> 8) & 0xff);
		printf("\tChar4:      0x%02x\n",
			(msg->Data[0]     ) & 0xff);
		printf("\tPort:         %d\n",
			(msg->Data[1] >> 8) & 0xff);
		break;

	case MPI_EVENT_LOGOUT:
		printf("\tN_PortId:   0x%04x\n", msg->Data[0]);
		printf("\tPort:         %d\n",
			(msg->Data[1] >> 8) & 0xff);
		break;
	}

}

コード例 #3

ファイル: mpt_debug.c プロジェクト: eyberg/rumpkernel-netbsd-src

static void
mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *msg)
{
	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
	printf("\tBus:          %d\n", msg->Bus);
	printf("\tTargetID      %d\n", msg->TargetID);
	printf("\tCDBLength     %d\n", msg->CDBLength);
	printf("\tSCSI Status:  %s\n", mpt_scsi_status(msg->SCSIStatus));
	printf("\tSCSI State:   %s\n", mpt_scsi_state(msg->SCSIState));
	printf("\tTransferCnt   0x%04x\n", le32toh(msg->TransferCount));
	printf("\tSenseCnt      0x%04x\n", le32toh(msg->SenseCount));
	printf("\tResponseInfo  0x%08x\n", le32toh(msg->ResponseInfo));
}

コード例 #4

static void
mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *msg)
{
	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
	printf("\tIOCNumber     %d\n",		msg->IOCNumber);
	printf("\tMaxChainDepth %d\n",		msg->MaxChainDepth);
	printf("\tWhoInit       %s\n",		mpt_who(msg->WhoInit));
	printf("\tBlockSize     %d\n",		msg->BlockSize);
	printf("\tFlags         %d\n",		msg->Flags);
	printf("\tReplyQueueDepth %d\n",	msg->ReplyQueueDepth);
	printf("\tReqFrameSize  0x%04x\n",	msg->RequestFrameSize);
	printf("\tFW Version    0x%08x\n",	msg->FWVersion.Word);
	printf("\tProduct ID    0x%04x\n",	msg->ProductID);
	printf("\tCredits       0x%04x\n",	msg->GlobalCredits);
	printf("\tPorts         %d\n",		msg->NumberOfPorts);
	printf("\tEventState    0x%02x\n",	msg->EventState);
	printf("\tHostMFA_HA    0x%08x\n",	msg->CurrentHostMfaHighAddr);
	printf("\tSenseBuf_HA   0x%08x\n",
	    msg->CurrentSenseBufferHighAddr);
	printf("\tRepFrameSize  0x%04x\n",	msg->CurReplyFrameSize);
	printf("\tMaxDevices    0x%02x\n",	msg->MaxDevices);
	printf("\tMaxBuses      0x%02x\n",	msg->MaxBuses);
	printf("\tFWImageSize   0x%04x\n",	msg->FWImageSize);
}

コード例 #5

ファイル: mpt_debug.c プロジェクト: eyberg/rumpkernel-netbsd-src

static void
mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *msg)
{
	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
	printf("\tPort:         %d\n", msg->PortNumber);
}