コード例 #1
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init htc_8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8974_add_batt_devices();
#endif /* CONFIG_HTC_BATT_8960 */
#if (defined(CONFIG_MACH_GLU_U) || defined(CONFIG_MACH_GLU_WLJ))
	syn_init_vkeys_8974();
#endif
	htc_8974_cable_detect_register();
	/* not load usb driver in mfgkernel:diag58 and gift mode */
	if (board_mfg_mode() != 6 && board_mfg_mode() != 7)
		htc_8974_add_usb_devices();
	else
		pr_info("[USB] %s: Don't load USB since board_mfg_mode=%d\n", __func__, board_mfg_mode());

	htc_8974_dsi_panel_power_register();
#if defined(CONFIG_FB_MSM_MDSS_HDMI_MHL_SII9234) && defined(CONFIG_HTC_MHL_DETECTION)
	htc_8974_mhl_ctrl_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_cpu_usage_register();
#endif
}
コード例 #2
0
void __init htc_8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8974_add_batt_devices();
#endif 
	htc_8974_cable_detect_register();
	htc_8974_add_usb_devices();
	htc_8974_dsi_panel_power_register();
#if defined(CONFIG_FB_MSM_MDSS_HDMI_MHL_SII9234) && defined(CONFIG_HTC_MHL_DETECTION)
	htc_8974_mhl_ctrl_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_cpu_usage_register();
#endif
#ifdef CONFIG_LCD_KCAL
	add_lcd_kcal_devices();
#endif
}
コード例 #3
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8916_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
}
コード例 #4
0
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined (CONFIG_BCMDHD)
	init_bcm_wifi();
#endif
/*                                                                    */
}
コード例 #5
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	spm_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	msm_bus_fabric_init_driver();
	qup_i2c_init_driver();
	ncp6335d_regulator_init();
	fan53555_regulator_init();
	cpr_regulator_init();
	tsens_tm_init_driver();

#ifdef CONFIG_SEC_THERMISTOR
	platform_device_register(&sec_device_thermistor);
#endif
	msm_thermal_device_init();
}
コード例 #6
0
void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();
#endif
/*                                                                       */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                       */
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif

}
コード例 #7
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
    msm_smem_init();
    msm_init_modem_notifier_list();
    msm_smd_init();
    msm_rpm_driver_init();
    msm_spm_device_init();
    msm_pm_sleep_status_init();
    rpm_regulator_smd_driver_init();
    qpnp_regulator_init();
    if (of_board_is_rumi())
        msm_clock_init(&msm8226_rumi_clock_init_data);
    else
        msm_clock_init(&msm8226_clock_init_data);
    tsens_tm_init_driver();
#if defined(CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_MACH_S3VE3G_EUR)  || defined (CONFIG_MACH_VICTOR3GDSDTV_LTN)  || \
    defined(CONFIG_SEC_AFYON_PROJECT) || defined(CONFIG_SEC_VICTOR_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT) || \
    defined(CONFIG_SEC_HESTIA_PROJECT) || defined(CONFIG_SEC_GNOTE_PROJECT) || defined(CONFIG_SEC_ATLANTIC_PROJECT) || \
	defined(CONFIG_SEC_DEGAS_PROJECT) || defined(CONFIG_SEC_T10_PROJECT) || defined(CONFIG_SEC_T8_PROJECT) || defined(CONFIG_SEC_MEGA2_PROJECT) || \
	defined(CONFIG_SEC_MS01_PROJECT)
#ifdef CONFIG_SEC_THERMISTOR
    platform_device_register(&sec_device_thermistor);
#endif
#endif
    msm_thermal_device_init();
}
コード例 #8
0
void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();

#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}
void __init htc_8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	msm8x26_cable_detect_register();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8x26_add_batt_devices();
#endif 
	msm8226_add_usb_devices();
#if defined(CONFIG_HTC_PANEL_PWR_REG)
	htc_8226_dsi_panel_power_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_8226_cpu_usage_register();
#endif
}
コード例 #10
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8916_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
#ifdef CONFIG_LGE_LCD_TUNING
	 lge_add_lcd_ctrl_devices();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	 lge_add_android_usb_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	 lge_add_diag_devices();
#endif
#if defined(CONFIG_LCD_KCAL)
	 lge_add_lcd_kcal_devices();
#endif
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#if defined(CONFIG_PRE_SELF_DIAGNOSIS)
	lge_add_pre_selfd_devices();
#endif
}
コード例 #11
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	spm_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	msm_bus_fabric_init_driver();
	qup_i2c_init_driver();
	ncp6335d_regulator_init();
	fan53555_regulator_init();
	cpr_regulator_init();
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	ram_console_debug_init();
#endif
#ifdef CONFIG_LCD_KCAL
	add_lcd_kcal_devices();
#endif
}
コード例 #12
0
void __init msm8610_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	tsens_tm_init_driver();
/* LGE do not use msm_thermal. LGE use thermal-engine only */

	msm_thermal_device_init();

	if (of_board_is_rumi())
		msm_clock_init(&msm8610_rumi_clock_init_data);
	else
		msm_clock_init(&msm8610_clock_init_data);
#if defined(CONFIG_ANDROID_RAM_CONSOLE)
	lge_add_persistent_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
    lge_android_usb_init();
#endif

#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ENABLE_MMC_STRENGTH_CONTROL
    lge_add_mmc_strength_devices();
#endif
}
コード例 #13
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msmkrypton_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_clock_init(&msmkrypton_clock_init_data);
}
コード例 #14
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msmsamarium_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_clock_init(&msm_dummy_clock_init_data);
	tsens_tm_init_driver();
}
コード例 #15
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8974_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_smd_regulator_driver_init();
	msm_spm_device_init();
	krait_power_init();
}
コード例 #16
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msmkrypton_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msmkrypton_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
}
コード例 #17
0
ファイル: board-8084.c プロジェクト: Blackburn29/PsycoKernel
void __init apq8084_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msm8084_clock_init_data);
	tsens_tm_init_driver();
}
コード例 #18
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here.
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm9625_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msm9625_clock_init_data);
	msm9625_init_buses();
	tsens_tm_init_driver();
}
コード例 #19
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init apq8084_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_smd_regulator_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&apq8084_rumi_clock_init_data);
	else
		msm_clock_init(&apq8084_clock_init_data);
}
コード例 #20
0
void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_BRICKED_THERMAL
	msm_thermal_init(&msm_thermal_pdata);
#else
	msm_thermal_device_init();
#endif

#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}
コード例 #21
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm_8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	regulator_stub_init();
	if (machine_is_msm8974_rumi())
		msm_clock_init(&msm_dummy_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	msm8974_init_buses();
}
コード例 #22
0
void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#ifdef CONFIG_LGE_QSDL_SUPPORT
	lge_add_qsdl_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}
コード例 #23
0
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
 	msm_thermal_device_init();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}
コード例 #24
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8974_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_smd_regulator_driver_init();
	msm_spm_device_init();
	krait_power_init();
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
	msm_thermal_device_init();
#endif

}
コード例 #25
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
}
コード例 #26
0
/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (machine_is_msm8974_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	msm8974_init_buses();
	msm_thermal_device_init();
	mxt_init_vkeys_8974();
}
コード例 #27
0
void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_VU3EVB)
	vu3ebv_init_input();
#endif
}
コード例 #28
0
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
	msm_thermal_device_init();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif // CONFIG_LCD_KCAL

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
}
コード例 #29
0
void __init msm8610_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	tsens_tm_init_driver();
	msm_thermal_device_init();

	if (of_board_is_rumi())
		msm_clock_init(&msm8610_rumi_clock_init_data);
	else
		msm_clock_init(&msm8610_clock_init_data);
}
コード例 #30
0
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif // CONFIG_LCD_KCAL

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_VU3EVB)
	vu3ebv_init_input();
#endif
}