void show_animation_line(UINT32 index,UINT32 capacity_grids){
UINT32 logonum;
UINT32 logolen;
UINT32 inaddr;
UINT32 i;
//void *fb_addr = mt_get_fb_addr();
UINT32 fb_size = mt_get_fb_size();
void *db_addr = mt_get_logo_db_addr();
unsigned int *pinfo = (unsigned int*)db_addr;
logonum = pinfo[0];
printf("[ChargingAnimation]show_animation_line :index= %d, logonum = %d\n", index, logonum);
//ASSERT(index < logonum);
if(index < logonum)
logolen = pinfo[3+index] - pinfo[2+index];
else
logolen = pinfo[1] - pinfo[2+index];
inaddr = (unsigned int)db_addr+pinfo[2+index];
printf("[ChargingAnimation]show_animation_line, in_addr=0x%08x, dest_addr=0x%08x, logolen=%d, ticks=%d\n",
inaddr, logolen, logolen, get_ticks());
//windows draw default 160 180,
mt_logo_decompress((void*)inaddr, (void*)line_pic_addr, logolen, line_pic_size);
printf("[ChargingAnimation]show_animation_line :line_pic_size= %d, line_pic_addr size = %d\n", line_pic_size, sizeof(line_pic_addr));
fill_line_flow(battery_rect.left, capacity_grids, battery_rect.right, battery_rect.bottom, line_pic_addr);
}
// number_position: 0~1st number, 1~2nd number ,2~%
void show_animation_number(UINT32 index,UINT32 number_position){
UINT32 logonum;
UINT32 logolen;
UINT32 inaddr;
UINT32 i;
//void *fb_addr = mt_get_fb_addr();
UINT32 fb_size = mt_get_fb_size();
void *db_addr = mt_get_logo_db_addr();
unsigned int *pinfo = (unsigned int*)db_addr;
logonum = pinfo[0];
printf("[ChargingAnimation]show_animation_number :index= %d, logonum = %d\n", index, logonum);
//ASSERT(index < logonum);
if(index < logonum)
logolen = pinfo[3+index] - pinfo[2+index];
else
logolen = pinfo[1] - pinfo[2+index];
inaddr = (unsigned int)db_addr+pinfo[2+index];
printf("[ChargingAnimation]show_animation_number, in_addr=0x%08x, dest_addr=0x%08x, logolen=%d, ticks=%d\n",
inaddr, logolen, logolen, get_ticks());
//windows draw default 160 180,
mt_logo_decompress((void*)inaddr, (void*)number_pic_addr, logolen, number_pic_size);
fill_rect_flow(number_location_rect.left+ number_pic_width*number_position,
number_location_rect.top,
number_location_rect.right+number_pic_width*number_position,
number_location_rect.bottom,number_pic_addr);
//mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
}
/*
* Initliaze charging animation parameters
*
*/
void init_fb_screen()
{
dprintf(INFO, "[lk logo: %s %d]\n",__FUNCTION__,__LINE__);
unsigned int fb_size = mt_get_fb_size();
logo_addr = mt_get_logo_db_addr();
phical_screen.width = CFG_DISPLAY_WIDTH;
phical_screen.height = CFG_DISPLAY_HEIGHT;
phical_screen.fb_size = fb_size;
phical_screen.fill_dst_bits = MTK_FB_ALIGNMENT;
// in JB2.MP need to allign width and height to 32 ,but jb5.mp needn't
phical_screen.needAllign = 1;
phical_screen.allignWidth = ALIGN_TO(CFG_DISPLAY_WIDTH, MTK_FB_ALIGNMENT);
/* In GB, no need to adjust 180 showing logo ,for fb driver dealing the change */
/* but in JB, need adjust it for screen 180 roration */
phical_screen.need180Adjust = 0; // need sync with chip driver
dprintf(INFO, "[lk logo: %s %d]MTK_LCM_PHYSICAL_ROTATION = %s\n",__FUNCTION__,__LINE__, MTK_LCM_PHYSICAL_ROTATION);
if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "270", 3))
{
phical_screen.rotation = 270;
} else if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "90", 2)){
phical_screen.rotation = 90;
} else if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "180", 3) && (phical_screen.need180Adjust == 1)){
phical_screen.rotation = 180;
} else {
phical_screen.rotation = 0;
}
sync_anim_version();
if (show_animationm_ver == 1)
{
unsigned int logonum;
unsigned int *db_addr = logo_addr;
unsigned int *pinfo = (unsigned int*)db_addr;
logonum = pinfo[0];
dprintf(INFO, "[lk logo: %s %d]pinfo[0]=0x%08x, pinfo[1]=0x%08x, pinfo[2]=%d\n", __FUNCTION__,__LINE__,
pinfo[0], pinfo[1], pinfo[2]);
dprintf(INFO, "[lk logo: %s %d]define ANIMATION_NEW:show new animation with capacity num\n",__FUNCTION__,__LINE__);
dprintf(INFO, "[lk logo: %s %d]CAPACITY_LEFT =%d, CAPACITY_TOP =%d \n",__FUNCTION__,__LINE__,(CAPACITY_LEFT) ,(CAPACITY_TOP) );
dprintf(INFO, "[lk logo: %s %d]LCM_HEIGHT=%d, LCM_WIDTH=%d \n",__FUNCTION__,__LINE__,(CAPACITY_RIGHT),(CAPACITY_BOTTOM));
if(logonum < 6)
{
show_animationm_ver = 0 ;
} else {
show_animationm_ver = 1 ;
}
}
}
// this is a sample code for how to draw the logo by yourself.
void cust_show_boot_logo(void)
{
void *fb_addr = mt_get_fb_addr();
UINT32 fb_size = mt_get_fb_size();
void *db_addr = mt_get_logo_db_addr();
memcpy(fb_addr, (void *)((UINT32)db_addr + fb_size * 0), fb_size);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
}
void show_animation(UINT32 index, RECT rect, char* addr){
UINT32 logonum;
UINT32 logolen;
UINT32 inaddr;
UINT32 i;
//void *fb_addr = mt_get_fb_addr();
UINT32 fb_size = mt_get_fb_size();
void *db_addr = mt_get_logo_db_addr();
unsigned int *pinfo = (unsigned int*)db_addr;
logonum = pinfo[0];
printf("[ChargingAnimation]show_animation : index = %d, logonum = %d\n", index, logonum);
//ASSERT(index < logonum);
printf("[ChargingAnimation]show_animation :pinfo[0] = %d, pinfo[1] = %d, pinfo[2]= %d, pinfo[3] = %d\n",pinfo[0] , pinfo[1],pinfo[2],pinfo[3]);
printf("[ChargingAnimation]show_animation :pinfo[2+index] = %d, pinfo[1] = %d\n",pinfo[2+index] , pinfo[3+index]);
if(index < logonum)
logolen = pinfo[3+index] - pinfo[2+index];
else
logolen = pinfo[1] - pinfo[2+index];
inaddr = (unsigned int)db_addr+pinfo[2+index];
printf("[ChargingAnimation]show_animation: in_addr=0x%08x, dest_addr=0x%08x, logolen=%d, ticks=%d\n",
inaddr, logolen, logolen, get_ticks());
mt_logo_decompress((void*)inaddr, (void*)addr, logolen, (rect.right-rect.left)*(rect.bottom-rect.top)*2);
printf("[ChargingAnimation]show_animation : rect right = %d\n", rect.right);
printf("[ChargingAnimation]show_animation : rect top = %d\n", rect.top);
printf("[ChargingAnimation]show_animation : rect size = %d\n", (rect.right-rect.left)*(rect.bottom-rect.top)*2);
fill_rect_flow(rect.left,rect.top,rect.right,rect.bottom,addr);
printf("ticks=%d\n", get_ticks());
}
void platform_init(void)
{
dprintf(INFO, "platform_init()\n");
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
nand_init();
nand_driver_test();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_load_logo = get_timer(0);
#endif
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
dprintf(INFO, "Show BLACK_PICTURE\n");
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_power(TRUE);
//<2012/11/14-Yuting Shih-[BU2SC00137502]Add for LOGO display.
#if 1
mt_disp_show_boot_logo();
#else
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_power(1); //power on display related modules
#endif
//>2012/11/14-Yuting Shih-[BU2SC00137502].
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
mt65xx_backlight_on();
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
mt_disp_show_boot_logo();
video_printf(" => Downloading...\n");
mt65xx_backlight_on();
mtk_wdt_disable();//Disable wdt before jump to DA
platform_uninit();
#ifdef HAVE_CACHE_PL310
l2_disable();
#endif
arch_disable_cache(UCACHE);
arch_disable_mmu();
jump_da(g_boot_arg->da_info.addr, g_boot_arg->da_info.arg1, g_boot_arg->da_info.arg2);
}
#ifdef LK_PROFILING
time_bat_init = get_timer(0);
#endif
mt65xx_bat_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat_init));
#endif
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
#ifndef CFG_POWER_CHARGING
rtc_boot_check(false);
#endif
#ifdef LK_PROFILING
time_show_logo = get_timer(0);
#endif
if ((g_boot_mode != ALARM_BOOT) && (g_boot_mode != FASTBOOT))
{
printf("show log disable\n");
mt_disp_show_boot_logo();
printf("show log end\n");
}
#ifdef LK_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
time_sw_env= get_timer(0);
#endif
sw_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- platform_init takes %d ms -------- \n", get_timer(time_platform_init));
#endif
}
void platform_init(void)
{
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
unsigned int time_env;
unsigned int time_disp_init;
unsigned int time_security_init;
unsigned int time_RTC_boot_Check;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
dprintf(INFO, "platform_init()\n");
#ifdef DUMMY_AP
dummy_ap_entry();
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
#ifndef MACH_FPGA
nand_init();
nand_driver_test();
#endif
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if((g_boot_arg->boot_reason == BR_USB) && (upmu_is_chr_det() == KAL_FALSE))
{
printf("[%s] Unplugged Charger/Usb between Pre-loader and Uboot in Kernel Charging Mode, Power Off \n", __func__);
mt6575_power_off();
}
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_env = get_timer(0);
#endif
env_init();
print_env();
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- ENV init takes %d ms -------- \n", (int)get_timer(time_env));
#endif
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode ==CMD_MODE)
mt_disp_init((void *)g_fb_base);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- disp init takes %d ms -------- \n", (int)get_timer(time_disp_init));
#endif
#ifdef LK_PROFILING
time_load_logo = get_timer(0);
#endif
#ifdef CONFIG_CFB_CONSOLE
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
drv_video_init();
#endif
#endif
//#endif
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
dprintf(INFO, "Show BLACK_PICTURE\n");
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_power(TRUE);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_power(1); //power on display related modules
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
/*for kpd pmic mode setting*/
set_kpd_pmic_mode();
//FIXME: Disable for MT6582 FPGA Ealry Porting
//#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
/*some lcm panel need more time to start show picture*/
msleep(50);
mt65xx_backlight_on();
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
//#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
#ifdef MTK_SECURITY_SW_SUPPORT
#ifdef LK_PROFILING
time_security_init = get_timer(0);
#endif
/* initialize security library */
#ifdef MTK_EMMC_SUPPORT
sec_func_init(1);
#else
sec_func_init(0);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Security init takes %d ms -------- \n", (int)get_timer(time_security_init));
#endif
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
printf("[LK] boot mode is DOWNLOAD_BOOT\n");
#ifdef MTK_SECURITY_SW_SUPPORT
/* verify da before jumping to da*/
if (sec_usbdl_enabled()) {
u8 *da_addr = (u8 *)g_boot_arg->da_info.addr;
u32 da_len = g_boot_arg->da_info.len;
u32 sig_len = g_boot_arg->da_info.sig_len;
u8 *sig_addr = (unsigned char *)da_addr + (da_len - sig_len);
if (da_len == 0 || sig_len == 0) {
printf("[LK] da argument is invalid\n");
printf("da_addr = 0x%x\n", da_addr);
printf("da_len = 0x%x\n", da_len);
printf("sig_len = 0x%x\n", sig_len);
}
if (sec_usbdl_verify_da(da_addr, (da_len - sig_len), sig_addr, sig_len)) {
/* da verify fail */
video_printf(" => Not authenticated tool, download stop...\n");
while(1); /* fix me, should not be infinite loop in lk */
}
}
else
#endif
{
printf(" DA verification disabled...\n");
}
mt_disp_show_boot_logo();
video_printf(" => Downloading...\n");
mt65xx_backlight_on();
mtk_wdt_disable();//Disable wdt before jump to DA
platform_uninit();
#ifdef HAVE_CACHE_PL310
l2_disable();
#endif
#ifdef ENABLE_L2_SHARING
config_shared_SRAM_size();
#endif
arch_disable_cache(UCACHE);
arch_disable_mmu();
jump_da(g_boot_arg->da_info.addr, g_boot_arg->da_info.arg1, g_boot_arg->da_info.arg2);
}
#ifdef LK_PROFILING
time_bat_init = get_timer(0);
#endif
mt65xx_bat_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat_init));
#endif
#ifndef CFG_POWER_CHARGING
#ifdef LK_PROFILING
time_RTC_boot_Check = get_timer(0);
#endif
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
rtc_boot_check(false);
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- RTC boot check Init takes %d ms -------- \n", (int)get_timer(time_RTC_boot_Check));
#endif
#endif
#ifdef LK_PROFILING
time_show_logo = get_timer(0);
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if(kernel_charging_boot() == 1)
{
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
CHARGER_TYPE CHR_Type_num = CHARGER_UNKNOWN;
charging_get_charger_type(&CHR_Type_num);
if ((g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT) ||
((CHR_Type_num != STANDARD_HOST) && (CHR_Type_num != NONSTANDARD_CHARGER)))
{
dprintf(INFO, "[PROFILE] ------- g_boot_mode = %d -------- \n", g_boot_mode);
#endif
mt_disp_power(TRUE);
mt_disp_show_low_battery();
mt_disp_wait_idle();
mt65xx_leds_brightness_set(6, 110);
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
}
else if(g_boot_mode != KERNEL_POWER_OFF_CHARGING_BOOT && g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT)
{
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
}
#else
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
time_sw_env= get_timer(0);
#endif
//sw_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
printf("[PROFILE] ------- platform_init takes %d ms -------- \n", get_timer(time_platform_init));
#endif
}
void platform_init(void)
{
/* init timer */
//mtk_timer_init();
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
unsigned int time_env;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
dprintf(INFO, "platform_init()\n");
#ifdef MTK_MT8193_SUPPORT
mt8193_init();
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
nand_init();
nand_driver_test();
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if((g_boot_arg->boot_reason == BR_USB) && (upmu_is_chr_det() == KAL_FALSE))
{
printf("[%s] Unplugged Charger/Usb between Pre-loader and Uboot in Kernel Charging Mode, Power Off \n", __func__);
mt6575_power_off();
}
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_env = get_timer(0);
#endif
env_init();
print_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- ENV init takes %d ms -------- \n", get_timer(time_env));
time_load_logo = get_timer(0);
#endif
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
#if ((!defined(MTK_NCP1851_SUPPORT)) && (!defined(MTK_BQ24196_SUPPORT)))
mt_disp_power(TRUE); //power on display related modules
#endif
dprintf(INFO, "Show BLACK_PICTURE\n");
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
/*for kpd pmic mode setting*/
set_kpd_pmic_mode();
#if ((!defined(MTK_NCP1851_SUPPORT)) && (!defined(MTK_BQ24196_SUPPORT)))
//mt65xx_backlight_on();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
enable_PMIC_kpd_clock();
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
/* initialize security library */
#ifdef MTK_EMMC_SUPPORT
sec_func_init(1);
#else
sec_func_init(0);
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
printf("[LK] boot mode is DOWNLOAD_BOOT\n");
/* verify da before jumping to da*/
if (sec_usbdl_enabled()) {
u8 *da_addr = g_boot_arg->da_info.addr;
u32 da_sig_len = DRV_Reg32(SRAMROM_BASE + 0x54);
u32 da_len = da_sig_len >> 10;
u32 sig_len = da_sig_len & 0x3ff;
u8 *sig_addr = (unsigned char *)da_addr + (da_len - sig_len);
if (da_len == 0 || sig_len == 0) {
printf("[LK] da argument is invalid\n");
printf("da_addr = 0x%x\n", da_addr);
printf("da_len = 0x%x\n", da_len);
printf("sig_len = 0x%x\n", sig_len);
}
if (sec_usbdl_verify_da(da_addr, (da_len - sig_len), sig_addr, sig_len)) {
/* da verify fail */
video_printf(" => Not authenticated tool, download stop...\n");
DRV_WriteReg32(SRAMROM_BASE + 0x54, 0x0);
while(1); /* fix me, should not be infinite loop in lk */
}
}
else {
static void show_logo(UINT32 index)
{
UINT32 logonum;
UINT32 logolen;
UINT32 inaddr;
void *fb_addr = mt_get_fb_addr();
void *fb_tempaddr = mt_get_tempfb_addr();
UINT32 fb_size = mt_get_fb_size();
void *db_addr = mt_get_logo_db_addr();
unsigned int *pinfo = (unsigned int*)db_addr;
logonum = pinfo[0];
ASSERT(index < logonum);
if(index < logonum)
logolen = pinfo[3+index] - pinfo[2+index];
else
logolen = pinfo[1] - pinfo[2+index];
inaddr = (unsigned int)db_addr+pinfo[2+index];
printf("show_logo, in_addr=0x%08x, fb_addr=0x%08x, logolen=%d, ticks=%d\n",
inaddr, fb_addr, logolen, get_ticks());
// mt_logo_decompress((void*)inaddr, (void*)fb_addr + 2 * fb_size, logolen, fb_size);
#if 1
{
unsigned short *d;
int j,k;
if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "270", 3))
{
unsigned int l;
unsigned short *s;
unsigned int width = CFG_DISPLAY_WIDTH;
unsigned int height = CFG_DISPLAY_HEIGHT;
mt_logo_decompress((void*)inaddr, fb_tempaddr, logolen, fb_size);
s = fb_tempaddr;
for (j=0; j<width; j++){
for (k=0, l=height-1; k<height; k++, l--)
{
d = fb_addr + ((ALIGN_TO(width, 32) * l + j) << 1);
*d = *s++;
}
}
}
else if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "90", 2))
{
unsigned int l;
unsigned short *s;
unsigned int width = CFG_DISPLAY_WIDTH;
unsigned int height = CFG_DISPLAY_HEIGHT;
mt_logo_decompress((void*)inaddr, fb_tempaddr, logolen, fb_size);
s = fb_tempaddr;
for (j=width - 1; j>=0; j--){
for (k=0, l=0; k<height; k++, l++)
{
d = fb_addr + ((ALIGN_TO(width, 32) * l + j) << 1);
*d = *s++;
}
}
}
else if(0 == strncmp(MTK_LCM_PHYSICAL_ROTATION, "180", 2))
{
unsigned short *s;
unsigned short *d;
unsigned int width = CFG_DISPLAY_WIDTH;
unsigned int height = CFG_DISPLAY_HEIGHT;
mt_logo_decompress((void*)inaddr, fb_tempaddr, logolen, fb_size);
s = fb_tempaddr + (2 * ((height - 1) * width));
d = fb_addr;
for (j=0;j < height; j++){
{
for (k=0;k < width; k++)
{
*(d+k) = *(s+width-k);
}
//memcpy(d, s, width * 2);
d += ALIGN_TO(width, 32);
s -= width;
}
}
}
else
#endif
{
if(0 != CFG_DISPLAY_WIDTH % 32){
unsigned short *s;
unsigned short *d;
unsigned int width = CFG_DISPLAY_WIDTH;
unsigned int height = CFG_DISPLAY_HEIGHT;
mt_logo_decompress((void*)inaddr, fb_tempaddr, logolen, fb_size);
s = fb_tempaddr;
d = fb_addr;
for (j=0;j < height; j++){
{
memcpy(d, s, width * 2);
d += ALIGN_TO(width, 32);
s += width;
}
}
}
else{
mt_logo_decompress((void*)inaddr, (void*)fb_addr, logolen, fb_size);
}
}
}
printf("ticks=%d\n", get_ticks());
}