C++ (Cpp) mt_power_offの例

コード例 #1

ファイル: bq24196_charger.c プロジェクト: SelfImp/m75

static kal_uint32 charging_set_power_off(void *data)
{
	kal_uint32 status = STATUS_OK;

	mt_power_off();

	return status;
}

コード例 #2

ファイル: charging_hw_fan5405.c プロジェクト: yangxianting/mediatek

static kal_uint32 charging_set_power_off(void *data)
{
    kal_uint32 status = STATUS_OK;
  
    battery_xlog_printk(BAT_LOG_CRTI, "charging_set_power_off=%d\n");
    mt_power_off();
         
    return status;
}

コード例 #3

ファイル: mt65xx_leds.c プロジェクト: dragonpt/android_kernel_acer_c10

/****************************************************************************
 * internal functions
 ***************************************************************************/
static int brightness_set_pwm(int pwm_num, enum led_brightness level,struct PWM_config *config_data)
{
struct pwm_spec_config pwm_setting;
	
	pwm_setting.pwm_no = pwm_num;
	pwm_setting.mode = PWM_MODE_FIFO; //new mode fifo and periodical mode
//	pwm_setting.clk_div = CLK_DIV1;
//	pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK_DIV_BY_1625;
	if(config_data->div)
	{
		pwm_setting.clk_div = config_data->div;
		backlight_PWM_div = config_data->div;
	}
   else
     pwm_setting.clk_div = CLK_DIV1;
	if(config_data->clock_source)
		pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK;
	else
		pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK_DIV_BY_1625;

	if(config_data->High_duration && config_data->low_duration)
		{
			pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = config_data->High_duration;
			pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = config_data->low_duration;
		}
	else
		{
			pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = 4;
			pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = 4;
		}
	
	pwm_setting.PWM_MODE_FIFO_REGS.IDLE_VALUE = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.GUARD_VALUE = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.STOP_BITPOS_VALUE = 63;
//	pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = 4;
//	pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = 4;
	pwm_setting.PWM_MODE_FIFO_REGS.GDURATION = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.WAVE_NUM = 0;
	
	printf("[LEDS]uboot: backlight_set_pwm:duty is %d\n", level);
  
	if(level > 0)
	{
            pwm_setting.PWM_MODE_FIFO_REGS.SEND_DATA0 = ((1 << 30) - 1);
	    pwm_setting.PWM_MODE_FIFO_REGS.SEND_DATA1 = 0 ;
		pwm_set_spec_config(&pwm_setting);
        }
        else
 	{
 	    mt_set_pwm_disable(pwm_setting.pwm_no);
	    mt_power_off (pwm_setting.pwm_no);
        }
	
	
	return 0;
	
}

コード例 #4

ファイル: charging_hw_eta6005.c プロジェクト: Jlsmily/android_kernel_meilan2

static kal_uint32 charging_set_power_off(void *data)
{
    kal_uint32 status = STATUS_OK;
  
#if defined(CONFIG_POWER_EXT) || defined(CONFIG_MTK_FPGA)
#else
    battery_xlog_printk(BAT_LOG_CRTI, "charging_set_power_off\n");
    mt_power_off();
#endif
         
    return status;
}

コード例 #5

static int brightness_set_pwm(int pwm_num, enum led_brightness level,struct PWM_config *config_data)
{
struct pwm_spec_config pwm_setting;
	
	pwm_setting.pwm_no = pwm_num;
	pwm_setting.mode = PWM_MODE_FIFO; //new mode fifo and periodical mode
//	pwm_setting.clk_div = CLK_DIV1;
//	pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK_DIV_BY_1625;
	if(config_data->div)
	{
		pwm_setting.clk_div = config_data->div;
		backlight_PWM_div = config_data->div;
	}
   else
     pwm_setting.clk_div = CLK_DIV1;
	if(config_data->clock_source)
		pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK;
	else
		pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK_DIV_BY_1625;
	
	pwm_setting.clk_src = PWM_CLK_NEW_MODE_BLOCK;
	
	if(config_data->High_duration && config_data->low_duration)
		{
			pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = config_data->High_duration;
			pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = config_data->low_duration;
		}
	else
		{
			pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = 4;
			pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = 4;
		}
	
	pwm_setting.PWM_MODE_FIFO_REGS.IDLE_VALUE = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.GUARD_VALUE = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.STOP_BITPOS_VALUE = 63;
//	pwm_setting.PWM_MODE_FIFO_REGS.HDURATION = 4;
//	pwm_setting.PWM_MODE_FIFO_REGS.LDURATION = 4;
	pwm_setting.PWM_MODE_FIFO_REGS.GDURATION = 0;
	pwm_setting.PWM_MODE_FIFO_REGS.WAVE_NUM = 0;
	
	printf("[LEDS]uboot: backlight_set_pwm:duty is %d\n", level);
  
	if(level > 0)
	{
            pwm_setting.PWM_MODE_FIFO_REGS.SEND_DATA0 = ((1 << 30) - 1);
	    pwm_setting.PWM_MODE_FIFO_REGS.SEND_DATA1 = 0 ;
		pwm_set_spec_config(&pwm_setting);
        }
        else
 	{
 	    mt_set_pwm_disable(pwm_setting.pwm_no);
	    mt_power_off (pwm_setting.pwm_no);
        }
//hongmei temp change for camry&megan		
#if defined(JRD_CAMRY_BORAD)		
	mt_set_gpio_mode(GPIO68,1); //baoqiang add:GPIO_PWM_3_PIN-GPIO68,GPIO_PWM_3_PIN_M_PWM-1
	//printf("[qbq]uboot:backlight set gpio pwm mode\n");
#endif	
	return 0;
	
}

コード例 #6

ファイル: kpd.c プロジェクト: vitek999/cyanogenmod_kernel_lge_h422

static void timer_function() 
{ 
    timer_exit();
    //arch_reset(0, "charger");
    mt_power_off();
}