int et_drvTxRxInit(char * dev, int unit)
{
if (et_drv_txrx_info[unit].et_drvMuxBindID != NULL) {
return -1;
}
et_drv_txrx_info[unit].queue_rx_pkts = 0;
et_drvTxRxNetpoolCreate(unit);
/* Bind et_drvTxRx Network service to the END driver. */
et_drv_txrx_info[unit].et_drvMuxBindID = (void *) muxBind(
dev, unit,
et_drvRecv, NULL,
NULL, NULL,
MUX_PROTO_SNARF, "ET_DRV TX/RX", NULL);
if (!et_drv_txrx_info[unit].et_drvMuxBindID)
{
logMsg("muxTkBind Failed (%08x).\n", errnoGet(), 2, 3, 4, 5, 6);
return -1;
}
/* Promiscuous mode */
muxIoctl( et_drv_txrx_info[unit].et_drvMuxBindID, EIOCSFLAGS, (void *)IFF_PROMISC);
return 0;
}
STATUS etherInputHookAdd
(
FUNCPTR inputHook, /* routine to receive Ethernet input */
char* pName, /* name of device if MUX/END is being used */
int unit /* unit of device if MUX/END is being used */
)
{
HOOK_ENTRY *pHookEnt;
HOOK_ENTRY *pHookCurr;
void * pBinding = NULL; /* Existing END device binding, if any. */
BOOL tkDevice=FALSE;
if (pName != NULL) /* We are dealing with an END. */
{
if (etherInputHookActive == FALSE) /* First END driver hook? */
{
if (etherInputHookRtn == NULL)
{
/* Initialize list - first network driver of either type. */
lstInit (&inputHookList);
}
etherInputHookActive = TRUE;
}
/* Check if bind is necessary and eliminate duplicate hook routine. */
for (pHookCurr = (HOOK_ENTRY *)lstFirst(&inputHookList);
pHookCurr != NULL;
pHookCurr = (HOOK_ENTRY *)lstNext(&pHookCurr->node))
{
/* Ignore BSD device hook entries. */
if (pHookCurr->pCookie == NULL)
continue;
if (STREQ(pHookCurr->name, pName) && (pHookCurr->unit == unit))
{
if (pHookCurr->routine == inputHook)
return (ERROR);
/* Additional hook for same device - reuse binding. */
pBinding = pHookCurr->pCookie;
}
}
pHookEnt = malloc (sizeof (HOOK_ENTRY));
if (pHookEnt == NULL)
return (ERROR);
bzero ( (char *)pHookEnt, sizeof (HOOK_ENTRY));
if (pBinding == NULL) /* No hook entry for this END device? */
{
/* Attach Ethernet input hook handler for this device. */
tkDevice = muxTkDrvCheck (pName);
if (tkDevice)
{
pBinding = muxTkBind (pName, unit, nptEtherInputHookRtn,
NULL, NULL, NULL, MUX_PROTO_SNARF,
"etherInputHook", pHookEnt, NULL, NULL);
}
else
{
pBinding = muxBind (pName, unit, endEtherInputHookRtn,
NULL, NULL, NULL, MUX_PROTO_SNARF,
"etherInputHook", pHookEnt);
}
if (pBinding == NULL)
{
free (pHookEnt);
return (ERROR);
}
}
/*
* Assign (new or existing) handler attachment for the device,
* allowing hook deletion in any order.
*/
pHookEnt->pCookie = pBinding;
strcpy (pHookEnt->name, pName);
pHookEnt->unit = unit;
pHookEnt->routine = inputHook;
lstAdd (&inputHookList, &pHookEnt->node);
}
else /* Old style driver. */
{
/* Check for duplicate hook routine. */
for (pHookCurr = (HOOK_ENTRY *)lstFirst(&inputHookList);
pHookCurr != NULL;
pHookCurr = (HOOK_ENTRY *)lstNext(&pHookCurr->node))
{
if (pHookCurr->pCookie) /* Ignore END device hook entries. */
continue;
if (pHookCurr->routine == inputHook)
return (ERROR);
}
pHookEnt = malloc(sizeof(HOOK_ENTRY));
if (pHookEnt == NULL)
return (ERROR);
bzero ( (char *)pHookEnt, sizeof (HOOK_ENTRY));
if (etherInputHookRtn == NULL) /* First BSD driver hook? */
{
etherInputHookRtn = etherInputHook;
if (!etherInputHookActive)
{
/* Initialize list - first network driver of either type. */
lstInit (&inputHookList);
}
}
pHookEnt->routine = inputHook;
lstAdd(&inputHookList, &pHookEnt->node);
}
return (OK);
}
STATUS wdbEndPktDevInit
(
WDB_END_PKT_DEV * pPktDev, /* device structure to init */
void (*stackRcv) (), /* receive packet callback (udpRcv) */
char * pDevice, /* Device (ln, ie, etc.) that we */
/* wish to bind to. */
int unit /* unit number (0, 1, etc.) */
)
{
END_OBJ * pEnd;
char ifname [20];
char inetAdrs [24];
/* initialize the wdbDrvIf field with driver info */
pPktDev->wdbDrvIf.mode = WDB_COMM_MODE_POLL| WDB_COMM_MODE_INT;
pPktDev->wdbDrvIf.mtu = WDB_END_PKT_MTU;
pPktDev->wdbDrvIf.stackRcv = stackRcv; /* udpRcv */
pPktDev->wdbDrvIf.devId = (WDB_END_PKT_DEV *)pPktDev;
pPktDev->wdbDrvIf.pollRtn = wdbEndPoll;
pPktDev->wdbDrvIf.pktTxRtn = wdbEndTx;
pPktDev->wdbDrvIf.modeSetRtn = wdbEndModeSet;
/* initialize the device specific fields in the driver structure */
pPktDev->inputBusy = FALSE;
pPktDev->outputBusy = FALSE;
#ifndef STANDALONE_AGENT
/*
* Here is where we bind to the lower layer.
* We do not, as yet, provide for a shutdown routine, but perhaps
* later.
* We are a promiscous protocol.
* The Int routine a fakeout. Interrupts are handled by the lower
* layer but we use a similar mechanism to check packets for
* the proper type and hand them off to the WDB agent from
* the "interrupt" routine if it's appropriate to do so.
*/
#ifdef WDB_NPT_CAPABLE
if (muxTkDrvCheck (pDevice) == TRUE)
{
if ((pPktDev->pCookie = muxTkBind (pDevice, unit, wdbNptInt,
(FUNCPTR)wdbNptShutdown,
NULL, NULL, MUX_PROTO_SNARF,
"Wind Debug Agent",
NULL, NULL, NULL)) == NULL)
{
if (wdbEndDebug)
logMsg ("Could not bind to NPT Device %s, loading...\n",
(int)pDevice, 2, 3, 4, 5, 6);
return (ERROR);
}
}
else /* END */
{
if (wdbEndDebug)
logMsg ("Not a NPT device! %s\n", (int)pDevice,2,3,4,5,6);
#endif /* WDB_NPT_CAPABLE */
if ((pPktDev->pCookie = muxBind (pDevice, unit, wdbEndInt, NULL,
NULL, NULL, MUX_PROTO_SNARF,
"Wind Debug Agent", NULL)) == NULL)
{
if (wdbEndDebug)
logMsg ("Could not bind to %s, loading...\n",
(int)pDevice, 2, 3, 4, 5, 6);
return (ERROR);
}
#ifdef WDB_NPT_CAPABLE
}
#endif /* WDB_NPT_CAPABLE */
pEnd = PCOOKIE_TO_ENDOBJ(pPktDev->pCookie);
#else /* STANDALONE_AGENT */
/*
* for standalone agent, we simply need to get the address of the
* of the device.
*/
if ((pPktDev->pCookie = endFindByName (pDevice, unit)) == NULL)
return (ERROR);
#endif /* STANDALONE_AGENT */
/* build interface name */
sprintf (ifname, "%s%d", pDevice, unit);
/* get interface inet address */
if (ifAddrGet (ifname, inetAdrs) != OK)
{
if (wdbEndDebug)
logMsg ("Could not get inet address of %s interface...\n",
(int) ifname, 2, 3, 4, 5, 6);
return (ERROR);
}
pPktDev->ipAddr.s_addr = inet_addr (inetAdrs);
pEnd = PCOOKIE_TO_ENDOBJ(pPktDev->pCookie);
if ((pInPkt = memalign (4,pEnd->mib2Tbl.ifMtu)) == NULL)
return (ERROR);
if ((pPktDev->pInBlk = wdbEndMblkClGet (pEnd, pEnd->mib2Tbl.ifMtu))
== NULL)
return (ERROR);
pPktDev->pInBlk->mBlkHdr.mFlags |= M_PKTHDR;
if ((pPktDev->pOutBlk = wdbEndMblkClGet (pEnd, pEnd->mib2Tbl.ifMtu))
== NULL)
return (ERROR);
pPktDev->pOutBlk->mBlkHdr.mFlags |= M_PKTHDR;
if ((pPktDev->lastHAddr = wdbEndMblkClGet (pEnd, pEnd->mib2Tbl.ifMtu))
== NULL)
return (ERROR);
if ((pPktDev->srcAddr = wdbEndMblkClGet (pEnd, pEnd->mib2Tbl.ifMtu))
== NULL)
return (ERROR);
/* Set the length to the size of the buffer just allocated. */
pPktDev->pInBlk->mBlkHdr.mLen = pPktDev->pInBlk->pClBlk->clSize;
pPktDev->lastHAddr->mBlkHdr.mLen = pEnd->mib2Tbl.ifPhysAddress.addrLength;
memset (pPktDev->lastHAddr->mBlkHdr.mData, 0xff,
pPktDev->lastHAddr->mBlkHdr.mLen);
/*
* Create a source address structure so we can send fully
* qualified packets.
*/
muxIoctl (pPktDev->pCookie, EIOCGADDR, pPktDev->srcAddr->mBlkHdr.mData);
pEndPktDev = pPktDev;
return (OK);
}
