void QgsDecorationScaleBar::render( QPainter * theQPainter )
{
QgsMapCanvas* canvas = QgisApp::instance()->mapCanvas();
int myBufferSize = 1; //softcode this later
//Get canvas dimensions
int myCanvasHeight = theQPainter->device()->height();
int myCanvasWidth = theQPainter->device()->width();
//Get map units per pixel. This can be negative at times (to do with
//projections) and that just confuses the rest of the code in this
//function, so force to a positive number.
double myMapUnitsPerPixelDouble = qAbs( canvas->mapUnitsPerPixel() );
double myActualSize = mPreferredSize;
// Exit if the canvas width is 0 or layercount is 0 or QGIS will freeze
int myLayerCount = canvas->layerCount();
if ( !myLayerCount || !myCanvasWidth || !myMapUnitsPerPixelDouble )
return;
//Large if statement which determines whether to render the scale bar
if ( enabled() )
{
// Hard coded sizes
int myMajorTickSize = 8;
int myTextOffsetX = 3;
int myMargin = 20;
QSettings settings;
QGis::UnitType myPreferredUnits = QGis::fromLiteral( settings.value( "/qgis/measure/displayunits", QGis::toLiteral( QGis::Meters ) ).toString() );
QGis::UnitType myMapUnits = canvas->mapUnits();
// Adjust units meter/feet/... or vice versa
myMapUnitsPerPixelDouble *= QGis::fromUnitToUnitFactor( myMapUnits, myPreferredUnits );
myMapUnits = myPreferredUnits;
//Calculate size of scale bar for preferred number of map units
double myScaleBarWidth = mPreferredSize / myMapUnitsPerPixelDouble;
//If scale bar is very small reset to 1/4 of the canvas wide
if ( myScaleBarWidth < 30 )
{
myScaleBarWidth = myCanvasWidth / 4; // pixels
myActualSize = myScaleBarWidth * myMapUnitsPerPixelDouble; // map units
};
//if scale bar is more than half the canvas wide keep halving until not
while ( myScaleBarWidth > myCanvasWidth / 3 )
{
myScaleBarWidth = myScaleBarWidth / 3;
};
myActualSize = myScaleBarWidth * myMapUnitsPerPixelDouble;
// Work out the exponent for the number - e.g, 1234 will give 3,
// and .001234 will give -3
double myPowerOf10 = floor( log10( myActualSize ) );
// snap to integer < 10 times power of 10
if ( mSnapping )
{
double scaler = pow( 10.0, myPowerOf10 );
myActualSize = qRound( myActualSize / scaler ) * scaler;
myScaleBarWidth = myActualSize / myMapUnitsPerPixelDouble;
}
//Get type of map units and set scale bar unit label text
QString myScaleBarUnitLabel;
switch ( myMapUnits )
{
case QGis::Meters:
if ( myActualSize > 1000.0 )
{
myScaleBarUnitLabel = tr( " km" );
myActualSize = myActualSize / 1000;
}
else if ( myActualSize < 0.01 )
{
myScaleBarUnitLabel = tr( " mm" );
myActualSize = myActualSize * 1000;
}
else if ( myActualSize < 0.1 )
{
myScaleBarUnitLabel = tr( " cm" );
myActualSize = myActualSize * 100;
}
else
myScaleBarUnitLabel = tr( " m" );
break;
case QGis::Feet:
if ( myActualSize > 5280.0 ) //5280 feet to the mile
{
myScaleBarUnitLabel = tr( " miles" );
// Adjust scale bar width to get even numbers
myActualSize = myActualSize / 5000;
myScaleBarWidth = ( myScaleBarWidth * 5280 ) / 5000;
}
else if ( myActualSize == 5280.0 ) //5280 feet to the mile
{
myScaleBarUnitLabel = tr( " mile" );
// Adjust scale bar width to get even numbers
myActualSize = myActualSize / 5000;
myScaleBarWidth = ( myScaleBarWidth * 5280 ) / 5000;
}
else if ( myActualSize < 1 )
{
myScaleBarUnitLabel = tr( " inches" );
myActualSize = myActualSize * 10;
myScaleBarWidth = ( myScaleBarWidth * 10 ) / 12;
}
else if ( myActualSize == 1.0 )
{
myScaleBarUnitLabel = tr( " foot" );
}
else
{
myScaleBarUnitLabel = tr( " feet" );
}
break;
case QGis::Degrees:
if ( myActualSize == 1.0 )
myScaleBarUnitLabel = tr( " degree" );
else
myScaleBarUnitLabel = tr( " degrees" );
break;
case QGis::UnknownUnit:
myScaleBarUnitLabel = tr( " unknown" );
default:
QgsDebugMsg( QString( "Error: not picked up map units - actual value = %1" ).arg( myMapUnits ) );
};
//Set font and calculate width of unit label
int myFontSize = 10; //we use this later for buffering
QFont myFont( "helvetica", myFontSize );
theQPainter->setFont( myFont );
QFontMetrics myFontMetrics( myFont );
double myFontWidth = myFontMetrics.width( myScaleBarUnitLabel );
double myFontHeight = myFontMetrics.height();
//Set the maximum label
QString myScaleBarMaxLabel = QLocale::system().toString( myActualSize );
//Calculate total width of scale bar and label
double myTotalScaleBarWidth = myScaleBarWidth + myFontWidth;
//determine the origin of scale bar depending on placement selected
int myOriginX = myMargin;
int myOriginY = myMargin;
switch ( mPlacementIndex )
{
case 0: // Bottom Left
myOriginX = myMargin;
myOriginY = myCanvasHeight - myMargin;
break;
case 1: // Top Left
myOriginX = myMargin;
myOriginY = myMargin;
break;
case 2: // Top Right
myOriginX = myCanvasWidth - (( int ) myTotalScaleBarWidth ) - myMargin;
myOriginY = myMargin;
break;
case 3: // Bottom Right
myOriginX = myCanvasWidth - (( int ) myTotalScaleBarWidth ) - myMargin;
myOriginY = myCanvasHeight - myMargin;
break;
default:
QgsDebugMsg( "Unable to determine where to put scale bar so defaulting to top left" );
}
//Set pen to draw with
QPen myForegroundPen( mColor, 2 );
QPen myBackgroundPen( Qt::white, 4 );
//Cast myScaleBarWidth to int for drawing
int myScaleBarWidthInt = ( int ) myScaleBarWidth;
//Create array of vertices for scale bar depending on style
switch ( mStyleIndex )
{
case 0: // Tick Down
{
QPolygon myTickDownArray( 4 );
//draw a buffer first so bar shows up on dark images
theQPainter->setPen( myBackgroundPen );
myTickDownArray.putPoints( 0, 4,
myOriginX , ( myOriginY + myMajorTickSize ) ,
myOriginX , myOriginY ,
( myScaleBarWidthInt + myOriginX ), myOriginY ,
( myScaleBarWidthInt + myOriginX ), ( myOriginY + myMajorTickSize )
);
theQPainter->drawPolyline( myTickDownArray );
//now draw the bar itself in user selected color
theQPainter->setPen( myForegroundPen );
myTickDownArray.putPoints( 0, 4,
myOriginX , ( myOriginY + myMajorTickSize ) ,
myOriginX , myOriginY ,
( myScaleBarWidthInt + myOriginX ), myOriginY ,
( myScaleBarWidthInt + myOriginX ), ( myOriginY + myMajorTickSize )
);
theQPainter->drawPolyline( myTickDownArray );
break;
}
case 1: // tick up
{
QPolygon myTickUpArray( 4 );
//draw a buffer first so bar shows up on dark images
theQPainter->setPen( myBackgroundPen );
myTickUpArray.putPoints( 0, 4,
myOriginX , myOriginY ,
myOriginX , myOriginY + myMajorTickSize ,
( myScaleBarWidthInt + myOriginX ), myOriginY + myMajorTickSize ,
( myScaleBarWidthInt + myOriginX ), myOriginY
);
theQPainter->drawPolyline( myTickUpArray );
//now draw the bar itself in user selected color
theQPainter->setPen( myForegroundPen );
myTickUpArray.putPoints( 0, 4,
myOriginX , myOriginY ,
myOriginX , myOriginY + myMajorTickSize ,
( myScaleBarWidthInt + myOriginX ), myOriginY + myMajorTickSize ,
( myScaleBarWidthInt + myOriginX ), myOriginY
);
theQPainter->drawPolyline( myTickUpArray );
break;
}
case 2: // Bar
{
QPolygon myBarArray( 2 );
//draw a buffer first so bar shows up on dark images
theQPainter->setPen( myBackgroundPen );
myBarArray.putPoints( 0, 2,
myOriginX , ( myOriginY + ( myMajorTickSize / 2 ) ),
( myScaleBarWidthInt + myOriginX ), ( myOriginY + ( myMajorTickSize / 2 ) )
);
theQPainter->drawPolyline( myBarArray );
//now draw the bar itself in user selected color
theQPainter->setPen( myForegroundPen );
myBarArray.putPoints( 0, 2,
myOriginX , ( myOriginY + ( myMajorTickSize / 2 ) ),
( myScaleBarWidthInt + myOriginX ), ( myOriginY + ( myMajorTickSize / 2 ) )
);
theQPainter->drawPolyline( myBarArray );
break;
}
case 3: // box
{
// Want square corners for a box
myBackgroundPen.setJoinStyle( Qt::MiterJoin );
myForegroundPen.setJoinStyle( Qt::MiterJoin );
QPolygon myBoxArray( 5 );
//draw a buffer first so bar shows up on dark images
theQPainter->setPen( myBackgroundPen );
myBoxArray.putPoints( 0, 5,
myOriginX , myOriginY,
( myScaleBarWidthInt + myOriginX ), myOriginY,
( myScaleBarWidthInt + myOriginX ), ( myOriginY + myMajorTickSize ),
myOriginX , ( myOriginY + myMajorTickSize ),
myOriginX , myOriginY
);
theQPainter->drawPolyline( myBoxArray );
//now draw the bar itself in user selected color
theQPainter->setPen( myForegroundPen );
theQPainter->setBrush( QBrush( mColor, Qt::SolidPattern ) );
int midPointX = myScaleBarWidthInt / 2 + myOriginX;
myBoxArray.putPoints( 0, 5,
myOriginX , myOriginY,
midPointX, myOriginY,
midPointX, ( myOriginY + myMajorTickSize ),
myOriginX , ( myOriginY + myMajorTickSize ),
myOriginX , myOriginY
);
theQPainter->drawPolygon( myBoxArray );
theQPainter->setBrush( Qt::NoBrush );
myBoxArray.putPoints( 0, 5,
midPointX , myOriginY,
( myScaleBarWidthInt + myOriginX ), myOriginY,
( myScaleBarWidthInt + myOriginX ), ( myOriginY + myMajorTickSize ),
midPointX , ( myOriginY + myMajorTickSize ),
midPointX , myOriginY
);
theQPainter->drawPolygon( myBoxArray );
break;
}
default:
QgsDebugMsg( "Unknown style" );
}
//Do actual drawing of scale bar
//
//Do drawing of scale bar text
//
QColor myBackColor = Qt::white;
QColor myForeColor = Qt::black;
//Draw the minimum label buffer
theQPainter->setPen( myBackColor );
myFontWidth = myFontMetrics.width( "0" );
myFontHeight = myFontMetrics.height();
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
theQPainter->drawText( int( i + ( myOriginX - ( myFontWidth / 2 ) ) ),
int( j + ( myOriginY - ( myFontHeight / 4 ) ) ),
"0" );
}
}
//Draw minimum label
theQPainter->setPen( myForeColor );
theQPainter->drawText(
int( myOriginX - ( myFontWidth / 2 ) ),
int( myOriginY - ( myFontHeight / 4 ) ),
"0"
);
//
//Draw maximum label
//
theQPainter->setPen( myBackColor );
myFontWidth = myFontMetrics.width( myScaleBarMaxLabel );
myFontHeight = myFontMetrics.height();
//first the buffer
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
theQPainter->drawText( int( i + ( myOriginX + myScaleBarWidthInt - ( myFontWidth / 2 ) ) ),
int( j + ( myOriginY - ( myFontHeight / 4 ) ) ),
myScaleBarMaxLabel );
}
}
//then the text itself
theQPainter->setPen( myForeColor );
theQPainter->drawText(
int( myOriginX + myScaleBarWidthInt - ( myFontWidth / 2 ) ),
int( myOriginY - ( myFontHeight / 4 ) ),
myScaleBarMaxLabel
);
//
//Draw unit label
//
theQPainter->setPen( myBackColor );
//first the buffer
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
theQPainter->drawText( i + ( myOriginX + myScaleBarWidthInt + myTextOffsetX ),
j + ( myOriginY + myMajorTickSize ),
myScaleBarUnitLabel );
}
}
//then the text itself
theQPainter->setPen( myForeColor );
theQPainter->drawText(
( myOriginX + myScaleBarWidthInt + myTextOffsetX ), ( myOriginY + myMajorTickSize ),
myScaleBarUnitLabel
);
}
}
void QgsQuickPrint::renderPrintScaleBar( QPainter * thepPainter,
QgsMapRenderer * thepMapRenderer,
int theMaximumWidth )
{
//hard coding some options for now
bool mySnappingFlag = true;
QColor mColor = Qt::black;
// Hard coded sizes
int myTextOffsetX = 0;
int myTextOffsetY = 5;
int myXMargin = 20;
int myYMargin = 20;
int myPreferredSize = theMaximumWidth - ( myXMargin * 2 );
double myActualSize = 0;
int myBufferSize = 1; //softcode this later
QColor myBackColor = Qt::white; //used for text
QColor myForeColor = Qt::black; //used for text
//Get canvas dimensions
//int myCanvasHeight = thepMapCanvas->height();
//Get map units per pixel. This can be negative at times (to do with
//projections) and that just confuses the rest of the code in this
//function, so force to a positive number.
double myMapUnitsPerPixelDouble = qAbs( thepMapRenderer->mapUnitsPerPixel() );
//
// Exit if the canvas width is 0 or layercount is 0 or QGIS will freeze
int myLayerCount = thepMapRenderer->layerSet().count();
if ( !myLayerCount || !myMapUnitsPerPixelDouble ) return;
//Calculate size of scale bar for preferred number of map units
double myScaleBarWidth = myPreferredSize;
myActualSize = myScaleBarWidth * myMapUnitsPerPixelDouble;
// Work out the exponent for the number - e.g, 1234 will give 3,
// and .001234 will give -3
double myPowerOf10 = floor( log10( myActualSize ) );
// snap to integer < 10 times power of 10
if ( mySnappingFlag )
{
double scaler = pow( 10.0, myPowerOf10 );
myActualSize = round( myActualSize / scaler ) * scaler;
myScaleBarWidth = myActualSize / myMapUnitsPerPixelDouble;
}
//Get type of map units and set scale bar unit label text
QGis::UnitType myMapUnits = thepMapRenderer->mapUnits();
QString myScaleBarUnitLabel;
switch ( myMapUnits )
{
case QGis::Meters:
if ( myActualSize > 1000.0 )
{
myScaleBarUnitLabel = tr( " km" );
myActualSize = myActualSize / 1000;
}
else if ( myActualSize < 0.01 )
{
myScaleBarUnitLabel = tr( " mm" );
myActualSize = myActualSize * 1000;
}
else if ( myActualSize < 0.1 )
{
myScaleBarUnitLabel = tr( " cm" );
myActualSize = myActualSize * 100;
}
else
myScaleBarUnitLabel = tr( " m" );
break;
case QGis::Feet:
if ( myActualSize > 5280.0 ) //5280 feet to the mile
{
myScaleBarUnitLabel = tr( " miles" );
myActualSize = myActualSize / 5280;
}
else if ( myActualSize == 5280.0 ) //5280 feet to the mile
{
myScaleBarUnitLabel = tr( " mile" );
myActualSize = myActualSize / 5280;
}
else if ( myActualSize < 1 )
{
myScaleBarUnitLabel = tr( " inches" );
myActualSize = myActualSize * 12;
}
else if ( myActualSize == 1.0 )
{
myScaleBarUnitLabel = tr( " foot" );
}
else
{
myScaleBarUnitLabel = tr( " feet" );
}
break;
case QGis::Degrees:
if ( myActualSize == 1.0 )
myScaleBarUnitLabel = tr( " degree" );
else
myScaleBarUnitLabel = tr( " degrees" );
break;
case QGis::UnknownUnit:
myScaleBarUnitLabel = tr( " unknown" );
default:
QgsDebugMsg( "Error: not picked up map units - actual value = "
+ QString::number( myMapUnits ) );
};
//Set font and calculate width of unit label
int myFontSize = 10; //we use this later for buffering
QFont myFont( "helvetica", myFontSize );
thepPainter->setFont( myFont );
QFontMetrics myFontMetrics( myFont );
double myFontWidth = myFontMetrics.width( myScaleBarUnitLabel );
double myFontHeight = myFontMetrics.height();
//Set the maximum label
QString myScaleBarMaxLabel = QString::number( myActualSize );
//Calculate total width of scale bar and label
//we divide by 2 because the max scale label
//will be centered over the endpoint of the scale bar
double myTotalScaleBarWidth = myScaleBarWidth + ( myFontWidth / 2 );
//determine the origin of scale bar (bottom right)
//for x origin set things up so the scalebar is centered
int myOriginX = ( theMaximumWidth - myTotalScaleBarWidth ) / 2;
int myOriginY = myYMargin;
//Set pen to draw with
QPen myForegroundPen( mColor, 2 );
QPen myBackgroundPen( Qt::white, 3 );
//Cast myScaleBarWidth to int for drawing
int myScaleBarWidthInt = ( int ) myScaleBarWidth;
//now draw the bar itself in user selected color
thepPainter->setPen( myForegroundPen );
//make a glossygradient for the background
QGradientStops myStops;
myStops << QGradientStop( 0.0, QColor( "#616161" ) );
myStops << QGradientStop( 0.5, QColor( "#505050" ) );
myStops << QGradientStop( 0.6, QColor( "#434343" ) );
myStops << QGradientStop( 1.0, QColor( "#656565" ) );
//draw again with the brush in the revers direction to complete teh glossiness
QLinearGradient myReverseGlossyBrush(
QPointF( myOriginX, myOriginY + myFontHeight*3 ),
QPointF( myOriginX, myOriginY ) );
thepPainter->setBrush( myReverseGlossyBrush );
thepPainter->drawRect(
myOriginX,
myOriginY,
myOriginX + myScaleBarWidthInt,
myOriginY + myFontHeight
);
//
//Do drawing of scale bar text
//
//Draw the minimum label buffer
thepPainter->setPen( myBackColor );
myFontWidth = myFontMetrics.width( "0" );
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
thepPainter->drawText( int( i + ( myOriginX - ( myFontWidth / 2 ) ) ),
int( j + ( myOriginY - ( myFontHeight / 4 ) ) ) - myTextOffsetY,
"0" );
}
}
//Draw minimum label
thepPainter->setPen( myForeColor );
thepPainter->drawText(
int( myOriginX - ( myFontWidth / 2 ) ),
int( myOriginY - ( myFontHeight / 4 ) ) - myTextOffsetY,
"0"
);
//
//Draw maximum label
//
thepPainter->setPen( myBackColor );
myFontWidth = myFontMetrics.width( myScaleBarMaxLabel );
myFontHeight = myFontMetrics.height();
//first the buffer
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
thepPainter->drawText( int( i + ( myOriginX + myScaleBarWidthInt - ( myFontWidth / 2 ) ) ),
int( j + ( myOriginY - ( myFontHeight / 4 ) ) ) - myTextOffsetY,
myScaleBarMaxLabel );
}
}
//then the text itself
thepPainter->setPen( myForeColor );
thepPainter->drawText(
int( myOriginX + myScaleBarWidthInt - ( myFontWidth / 2 ) ),
int( myOriginY - ( myFontHeight / 4 ) ) - myTextOffsetY,
myScaleBarMaxLabel
);
//
//Draw unit label
//
thepPainter->setPen( myBackColor );
myFontWidth = myFontMetrics.width( myScaleBarUnitLabel );
//first the buffer
for ( int i = 0 - myBufferSize; i <= myBufferSize; i++ )
{
for ( int j = 0 - myBufferSize; j <= myBufferSize; j++ )
{
thepPainter->drawText( i + ( myOriginX + myScaleBarWidthInt + myTextOffsetX ),
j + myOriginY + myFontHeight + ( myFontHeight*2.5 ) + myTextOffsetY,
myScaleBarUnitLabel );
}
}
//then the text itself
thepPainter->setPen( myForeColor );
thepPainter->drawText(
myOriginX + myScaleBarWidthInt + myTextOffsetX,
myOriginY + myFontHeight + ( myFontHeight*2.5 ) + myTextOffsetY,
myScaleBarUnitLabel
);
}
