static int SD_matchEndpointHost_3(const char *endpoint, const char *host) {
const char *hostp = mystrcasestr(endpoint, host);
if (NULL == hostp) return 0; /* host not found */
int index = hostp - endpoint;
if (index < 3) return 0; /* cannot match '://' */
if (strlen(endpoint) < index + strlen(host) + 1) return 0;
return (hostp[-3] == ':') && (hostp[-2] == '/') && (hostp[-1] == '/')
&& (hostp[strlen(host)] == ':');
}
/*
* Open device and perform command
*/
int
main(int argc, char **argv)
{
struct k8048 k;
char *execdup, *execname;
/* Initialise to NULL/0 */
memset(&k, 0, sizeof(k));
/* Get exec name */
execdup = (char *)strdup(argv[0]);
if (execdup == NULL) {
printf("%s: fatal error: strdup failed\n", __func__);
io_exit(&k, EX_OSERR); /* Panic */
}
execname = basename(execdup);
if (execname == NULL) {
printf("%s: fatal error: basename failed\n", __func__);
io_exit(&k, EX_OSERR); /* Panic */
}
/* Get configuration */
getconf(&k);
/* Command: k8048 */
if (strcmp(execname, "k8048") == 0) {
resetuid(&k);
usage_k8048(&k);
}
#ifdef TTY
/* Command: kload */
if (strcmp(execname, "kload") == 0) {
resetuid(&k);
if (argc < 3)
usage_kload(&k, "Missing arg");
if (argc > 5)
usage_kload(&k, "Too many args");
int prog_mode = tolower((int)argv[1][0]);
if (prog_mode != 'p' && prog_mode != 'v')
usage_kload(&k, "Invalid mode");
if (argv[2][0] == '/' && strstr(argv[2], "/dev/tty") != argv[2])
usage_kload(&k, "Invalid tty");
char file[STRLEN];
strcpy(file, "-");
if (argc >= 4)
strncpy(file, argv[3], STRMAX);
int target = 'n';
if (argc == 5) {
target = tolower((int)argv[4][0]);
if (target != 'a')
usage_kload(&k, "Invalid target");
}
io_signal_on(k); // !SIGPIPE
stk500v2_load(&k, prog_mode, argv[2], file, target);
io_exit(&k, EX_OK);
}
#endif
/* Open device */
if (io_open(&k) < 0) {
#ifdef KTEST
if (strcmp(execname, "ktest") == 0)
usage_ktest(&k, io_error(&k));
#endif
usage(&k, execname, io_error(&k));
}
/* Raise priority */
setpriority(PRIO_PROCESS, 0, -20);
/* Reset user */
resetuid(&k);
#ifdef KCTRL
/* Command: kctrl */
if (strcmp(execname, "kctrl") == 0) {
if (argc < 2)
usage_kctrl(&k, "Missing arg");
if (argc > 2)
usage_kctrl(&k, "Too many args");
if (strcasecmp(argv[1], "RUN") == 0) {
io_close(&k, HIGH);
printf("RUN\n");
} else if (strcasecmp(argv[1], "STOP") == 0) {
io_close(&k, LOW);
printf("STOP\n");
} else if (strcasecmp(argv[1], "RESTORE") == 0) {
io_set_vpp(&k, LOW);
io_usleep(&k, 10);
io_close(&k, HIGH);
printf("RESTORE\n");
}
io_exit(&k, EX_OK);
}
#endif
#ifdef KTEST
/* Command: ktest */
if (strcmp(execname, "ktest") == 0) {
if (argc < 3)
usage_ktest(&k, "Missing args");
if (argc > 3)
usage_ktest(&k, "Too many args");
int32_t testarg = strtol(argv[2], NULL, 0);
if (testarg < 0)
usage_ktest(&k, "Invalid arg");
if (strcasecmp(argv[1], "VPP") == 0)
io_test0(&k, 0, testarg);
else if (strcasecmp(argv[1], "PGC") == 0)
io_test0(&k, 1, testarg);
else if (strcasecmp(argv[1], "PGD") == 0)
io_test0(&k, 2, testarg);
else if (strcasecmp(argv[1], "PGM") == 0)
io_test0(&k, 3, testarg);
else if (argv[1][0] >= '0' && argv[1][0] <= '9') {
int32_t test = strtol(argv[1], NULL, 0);
switch (test) {
#ifdef RPI
case 0: gpio_test(&k, testarg);break;
#endif
case 1: io_test1(&k, testarg); break;
case 2: io_test2(&k, testarg); break;
case 3: io_test3(&k, testarg); break;
case 4: io_test4(&k, testarg); break;
#if defined(KTEST) && defined(KIO)
case 5: io_test5(&k, testarg); break;
#endif
default:usage_ktest(&k, "Invalid arg");break;
}
} else {
usage_ktest(&k, "Invalid arg");
}
io_exit(&k, EX_OK);
}
#endif
/* Determine arch: k12 | k14 | k16 | k24 | k32 */
if (pic_arch(&k, execname) == 0)
usage_k8048(&k);
if (argc < 2)
usage(&k, execname, "Missing arg(s)");
/* Device selection */
int argv1 = tolower((int)argv[1][0]);
if (argv1 == 's') { /* Select device */
if (argc < 3) {
pic_selector(&k);
io_exit(&k, EX_OK);
}
if (mystrcasestr(argv[2], "dspic") == argv[2]) {
strncpy(k.devicename, argv[2], STRLEN);
} else if (mystrcasestr(argv[2], "pic") == argv[2]) {
strncpy(k.devicename, argv[2], STRLEN);
} else {
int32_t temp = strtol(argv[2], NULL, 0);
if (temp < 10 || temp > 33) {
usage(&k, execname, "Invalid arg [select]");
}
if (temp == 30 || temp == 33) {
strcpy(k.devicename, "dspic");
strncpy(&k.devicename[5], argv[2], STRLEN - 5);
} else {
strcpy(k.devicename, "pic");
strncpy(&k.devicename[3], argv[2], STRLEN - 3);
}
}
argc -= 2;
argv += 2;
if (argc < 2)
usage(&k, execname, "Missing arg(s)");
} else if (k.pic->arch == ARCH12BIT) {
usage(&k, execname, "Missing select");
}
/* Key entry */
argv1 = tolower((int)argv[1][0]);
if (argv1 == 'l') { /* LVP 32-bit key entry */
if (k.pic->arch == ARCH12BIT) {
usage(&k, execname, "Invalid arg [lvp]");
}
/* ARCH14BIT || ARCH16BIT || ARCH24BIT || ARCH32BIT */
k.key = LVPKEY;
argc -= 1;
argv += 1;
if (argc < 2)
usage(&k, execname, "Missing arg(s)");
}
else if (argv1 == 'h') { /* HVP 32-bit key entry */
if (k.pic->arch == ARCH12BIT || k.pic->arch == ARCH14BIT || k.pic->arch == ARCH32BIT) {
usage(&k, execname, "Invalid arg [hvp]");
}
/* ARCH16BIT || ARCH24BIT */
k.key = HVPKEY;
argc -= 1;
argv += 1;
if (argc < 2)
usage(&k, execname, "Missing arg(s)");
}
else if (k.pic->arch == ARCH32BIT) { /* LVP 32-bit key entry */
/* ARCH32BIT */
k.key = LVPKEY;
}
else { /* No key entry */
/* ARCH12BIT || ARCH14BIT || ARCH16BIT || ARCH24BIT */
k.key = NOKEY;
}
/* Command */
argv1 = tolower((int)argv[1][0]);
int argv11 = tolower((int)argv[1][1]);
switch (argv1) {
case 'b': if (argv11 == 'o') { /* BOOT */
uint32_t addr = UINT32_MAX, words = UINT32_MAX;
if (argc > 4)
usage(&k, execname, "Too many args [boot]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(&k, execname, "Invalid arg [boot]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpboot(&k, addr, words);
} else { /* BLANK */
if (argc > 2)
usage(&k, execname, "Too many args [blank]");
if (areyousure("Blank device"))
pic_blank(&k);
}
break;
case 'c': if (argc > 3)
usage(&k, execname, "Too many args [config]");
if (argc == 2)
pic_dumpconfig(&k);
else
pic_writebandgap(&k, strtoul(argv[2], NULL, 0));
break;
case 'd': if (argv11 == 'a') { /* DATA */
if (argc > 2)
usage(&k, execname, "Too many args [data]");
pic_dumpdata(&k);
} else if (argv11 == 'e') { /* DEBUG */
printf("Hello world!\n");
} else { /* DUMP */
if (argc > 2)
usage(&k, execname, "Too many args [dump]");
pic_dumpdevice(&k);
}
break;
case 'e': if (argv11 == 'r') { /* ERASE FLASH | ID | ROW[NROWS] */
uint32_t row = 0, nrows = 1;
char prompt[STRLEN] = {0}, *endptr = NULL;
if (argc < 3)
usage(&k, execname, "Missing arg [erase]");
if (argc > 4)
usage(&k, execname, "Too many args [erase]");
int argv2 = tolower((int)argv[2][0]);
switch (argv2) {
case 'i': /* IDLOCATION */
case 'u': /* USERID/CONFIG */
row = PIC_ERASE_ID;
strncpy(prompt, "Erase id", STRLEN);
break;
case 'c': /* CONFIG */
row = PIC_ERASE_CONFIG;
strncpy(prompt, "Erase config", STRLEN);
break;
case 'e': /* EEPROM */
row = PIC_ERASE_EEPROM;
strncpy(prompt, "Erase EEPROM", STRLEN);
break;
case 'f': /* FLASH */
nrows = UINT32_MAX;
strncpy(prompt, "Erase program flash", STRLEN);
break;
default: /* FLASH ROW */
row = strtoul(argv[2], &endptr, 0);
if (endptr == argv[2])
usage(&k, execname, "Invalid arg [erase]");
if (argc == 4) {
nrows = strtoul(argv[3], NULL, 0);
if (nrows == 0)
usage(&k, execname, "Invalid arg [erase]");
}
snprintf(prompt, STRLEN, "Erase %u row(s) at row %u",
nrows, row);
break;
}
if (areyousure(prompt))
pic_erase(&k, row, nrows);
} else if (argv11 == 'x') { /* EXECUTIVE */
uint32_t addr = UINT32_MAX, words = UINT32_MAX;
if (argc > 4)
usage(&k, execname, "Too many args [executive]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(&k, execname, "Invalid arg [executive]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpexec(&k, addr, words);
} else { /* EEPROM */
if (argc > 2)
usage(&k, execname, "Too many args [eeprom]");
pic_dumpdata(&k);
}
break;
case 'f': {
uint32_t words = UINT32_MAX, addr = UINT32_MAX;
if (argc > 4)
usage(&k, execname, "Too many args [program flash]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(&k, execname, "Invalid arg [program flash]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpprogram(&k, addr, words);
}
break;
case 'i': if (argc > 2)
usage(&k, execname, "Too many args [id]");
pic_dumpdeviceid(&k);
break;
case 'o': if (argc > 3)
usage(&k, execname, "Too many args [osccal]");
if (argc == 2)
pic_dumposccal(&k);
else
pic_writeosccal(&k, strtoul(argv[2], NULL, 0));
break;
case 'p': {
int blank = 1;
if (argc > 4)
usage(&k, execname, "Too many args [program]");
if (argc == 4) switch (argv[3][0]) {
case 'n':
case 'N':
case '0': blank = 0;
break;
case 'y':
case 'Y':
case '1': blank = 1;
break;
default:usage(&k, execname, "Invalid arg [program]");
break;
}
if (argc < 3)
pic_program(&k, "-", 1);
else
pic_program(&k, argv[2], blank);
}
break;
case 'v': if (argv11 == 'i') { /* VIEW */
if (argc > 3)
usage(&k, execname, "Too many args [view]");
if (argc < 3)
pic_view(&k, "-");
else
pic_view(&k, argv[2]);
} else { /* VERIFY */
if (argc > 3)
usage(&k, execname, "Too many args [verify]");
if (argc < 3)
pic_verify(&k, "-");
else
pic_verify(&k, argv[2]);
}
break;
#ifdef TTY
case '/': if (strstr(argv[1], "/dev/tty") != argv[1]) {
usage(&k, execname, "Invalid device [TTY]");
}
if (strstr(argv[1], k.device) != NULL) {
usage(&k, execname, "Device in use [TTY]");
}
stk500v2_listen(&k, argv[1], 0);
break;
case '8': stk500v2_listen(&k, "0.0.0.0", 8048);
break;
#endif
default: usage(&k, execname, "Unknown operation");
break;
}
free(execdup);
io_exit(&k, EX_OK);
}
/*
* Configuration
*/
void
getconf(void)
{
FILE *f1;
char line[STRLEN];
/* Configure defaults */
io_config();
/* Determine dot file name */
getdotfile();
/* Load dot file when available */
if (p.dotfile[0] && (f1 = fopen(p.dotfile, "rb")) != NULL) {
while (fgets(line, STRLEN, f1) != NULL) {
/* Remove CRLF */
rmcrlf(line, STRLEN);
if (mystrcasestr(line, "DEVICE=") == line) {
strncpy(p.device, &line[7], STRLEN);
}
#ifdef TTY
else if (mystrcasestr(line, "BAUDRATE=") == line) {
p.baudrate = strtoul(&line[9], NULL, 0);
}
#endif
else if (mystrcasestr(line, "SLEEP=") == line) {
p.sleep_low = strtoul(&line[6], NULL, 0);
p.sleep_high = p.sleep_low;
}
else if (mystrcasestr(line, "SLEEP_LOW=") == line) {
p.sleep_low = strtoul(&line[10], NULL, 0);
}
else if (mystrcasestr(line, "SLEEP_HIGH=") == line) {
p.sleep_high = strtoul(&line[11], NULL, 0);
}
else if (mystrcasestr(line, "BITRULES=") == line) {
p.bitrules = strtoul(&line[9], NULL, 0);
}
else if (mystrcasestr(line, "BUSY=") == line) {
p.busy = strtoul(&line[5], NULL, 0);
}
#if defined(RPI) || defined(BITBANG) || defined(FTDI) || defined(BPI)
else if (mystrcasestr(line, "VPP=") == line) {
p.vpp = strtoul(&line[4], NULL, 0);
}
else if (mystrcasestr(line, "PGM=") == line) {
p.pgm = strtoul(&line[4], NULL, 0);
}
else if (mystrcasestr(line, "PGC=") == line) {
p.pgc = strtoul(&line[4], NULL, 0);
}
else if (mystrcasestr(line, "PGD=") == line) {
p.pgdi = strtoul(&line[4], NULL, 0);
p.pgdo = p.pgdi;
}
else if (mystrcasestr(line, "PGDO=") == line) {
p.pgdo = strtoul(&line[5], NULL, 0);
}
else if (mystrcasestr(line, "PGDI=") == line) {
p.pgdi = strtoul(&line[5], NULL, 0);
}
#endif /* RPI || BITBANG || FTDI || BPI */
#if defined(FTDI)
else if (mystrcasestr(line, "USB_SERIAL=") == line) {
strncpy(p.usb_serial, &line[11], STRLEN);
}
#endif /* FTDI*/
#ifdef MCP23017
else if (mystrcasestr(line, "MCP=") == line) {
p.mcp = strtoul(&line[4], NULL, 0);
}
#endif /* MCP23017 */
else if (mystrcasestr(line, "FWSLEEP=") == line) {
p.fwsleep = strtoul(&line[8], NULL, 0);
}
else if (mystrcasestr(line, "DEBUG=") == line) {
p.debug = strtoul(&line[6], NULL, 0);
}
else if (mystrcasestr(line, "ETC=") == line) {
strncpy(p.etc, &line[4], STRLEN);
}
}
fclose(f1);
} else { /* We are using the defaults */
snprintf(p.dotfile, STRLEN, "Using defaults (override in %s)", DOTFILENAME);
}
}
static int SD_matchEndpointHost_4(const char *endpoint, const char *host) {
return mystrcasestr(endpoint, host) != NULL;
}
/*
* Open device and perform command
*/
int
main(int argc, char **argv)
{
char *execdup, *execname;
int rc = EX_OK;
/* Get exec name */
execdup = (char *)strdup(argv[0]);
if (execdup == NULL) {
printf("%s: fatal error: strdup failed\n", __func__);
io_exit(EX_OSERR); /* Panic */
}
execname = basename(execdup);
if (execname == NULL) {
printf("%s: fatal error: basename failed\n", __func__);
io_exit(EX_OSERR); /* Panic */
}
/* Get configuration */
getconf();
/* Open device */
if (io_open() < 0) {
usage(execname, io_error());
}
/* Raise priority */
setpriority(PRIO_PROCESS, 0, -20);
/* Reset uid */
if (getuid() != geteuid()) {
if (setuid(getuid()) < 0) {
printf("%s: fatal error: setuid failed\n", __func__);
io_exit(EX_OSERR); /* Panic */
}
}
/* Determine arch: 12 | 14 | 16 | 24 | 32 */
if (pic_arch(execname) == 0)
usage_pickle();
/* Perform operation */
if (argc < 2)
usage(execname, "Missing arg(s)");
/* Device selection */
int argv1 = tolower((int)argv[1][0]);
if (argv1 == 's') { /* Select device */
if (argc < 3) {
pic_selector();
io_exit(EX_OK);
}
if (mystrcasestr(argv[2], "dspic") == argv[2]) {
strncpy(p.devicename, argv[2], STRLEN);
} else if (mystrcasestr(argv[2], "pic") == argv[2]) {
strncpy(p.devicename, argv[2], STRLEN);
} else {
int32_t temp = strtol(argv[2], NULL, 0);
if (temp < 10 || temp > 33) {
usage(execname, "Invalid arg [select]");
}
if (temp == 30 || temp == 33) {
strcpy(p.devicename, "dspic");
strncpy(&p.devicename[5], argv[2], STRLEN - 5);
} else {
strcpy(p.devicename, "pic");
strncpy(&p.devicename[3], argv[2], STRLEN - 3);
}
}
argc -= 2;
argv += 2;
if (argc < 2)
usage(execname, "Missing arg(s)");
} else if (p.pic->arch == ARCH12BIT) {
usage(execname, "Missing select");
}
/* Key entry */
argv1 = tolower((int)argv[1][0]);
if (argv1 == 'l') { /* LVP 32-bit key entry */
if (p.pic->arch == ARCH12BIT) {
usage(execname, "Invalid arg [lvp]");
}
/* ARCH14BIT || ARCH16BIT || ARCH24BIT || ARCH32BIT */
p.key = LVPKEY;
argc -= 1;
argv += 1;
if (argc < 2)
usage(execname, "Missing arg(s)");
}
else if (argv1 == 'h') { /* HVP 32-bit key entry */
if (p.pic->arch == ARCH12BIT || p.pic->arch == ARCH14BIT || p.pic->arch == ARCH32BIT) {
usage(execname, "Invalid arg [hvp]");
}
/* ARCH16BIT || ARCH24BIT */
p.key = HVPKEY;
argc -= 1;
argv += 1;
if (argc < 2)
usage(execname, "Missing arg(s)");
}
else if (p.pic->arch == ARCH32BIT) { /* LVP 32-bit key entry */
/* ARCH32BIT */
p.key = LVPKEY;
}
else { /* No key entry */
/* ARCH12BIT || ARCH14BIT || ARCH16BIT || ARCH24BIT */
p.key = NOKEY;
}
/* Command */
argv1 = tolower((int)argv[1][0]);
int argv11 = tolower((int)argv[1][1]);
switch (argv1) {
case 'b': if (argv11 == 'o') { /* BOOT */
uint32_t addr = UINT32_MAX, words = UINT32_MAX;
if (argc > 4)
usage(execname, "Too many args [boot]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(execname, "Invalid arg [boot]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpboot(addr, words);
} else { /* BLANK */
int config = 1;
if (argc > 3)
usage(execname, "Too many args [blank]");
if (argc == 3) switch (argv[2][0]) {
case 'n':
case 'N':
case '0': config = 0;
break;
case 'y':
case 'Y':
case '1': config = 1;
break;
default:usage(execname, "invalid arg [blank]");
break;
}
if (areyousure("Blank device")) {
pic_blank(config);
}
}
break;
case 'c': if (argc > 3)
usage(execname, "Too many args [config]");
if (argc == 2)
pic_dumpconfig();
else
pic_writebandgap(strtoul(argv[2], NULL, 0));
break;
case 'd': if (argv11 == 'a') { /* DATA */
if (argc > 2)
usage(execname, "Too many args [data]");
pic_dumpdata();
} else if (argv11 == 'e') { /* DEBUG */
pic_debug();
} else { /* DUMP */
if (argc > 2)
usage(execname, "Too many args [dump]");
pic_dumpdevice();
}
break;
case 'e': if (argv11 == 'r') { /* ERASE FLASH | ID | ROW[NROWS] */
uint32_t row = 0, nrows = 1;
char prompt[STRLEN] = {0}, *endptr = NULL;
if (argc < 3)
usage(execname, "Missing arg [erase]");
if (argc > 4)
usage(execname, "Too many args [erase]");
int argv2 = tolower((int)argv[2][0]);
switch (argv2) {
case 'i': /* IDLOCATION */
case 'u': /* USERID/CONFIG */
row = PIC_ERASE_ID;
strncpy(prompt, "Erase id", STRLEN);
break;
case 'c': /* CONFIG */
row = PIC_ERASE_CONFIG;
strncpy(prompt, "Erase config", STRLEN);
break;
case 'e': /* EEPROM */
row = PIC_ERASE_EEPROM;
strncpy(prompt, "Erase EEPROM", STRLEN);
break;
case 'f': /* FLASH */
nrows = UINT32_MAX;
strncpy(prompt, "Erase program flash", STRLEN);
break;
default: /* FLASH ROW */
row = strtoul(argv[2], &endptr, 0);
if (endptr == argv[2])
usage(execname, "Invalid arg [erase]");
if (argc == 4) {
nrows = strtoul(argv[3], NULL, 0);
if (nrows == 0)
usage(execname, "Invalid arg [erase]");
}
snprintf(prompt, STRLEN, "Erase %u row(s) at row %u",
nrows, row);
break;
}
if (areyousure(prompt))
pic_erase(row, nrows);
} else if (argv11 == 'x') { /* EXECUTIVE */
uint32_t addr = UINT32_MAX, words = UINT32_MAX;
if (argc > 4)
usage(execname, "Too many args [executive]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(execname, "Invalid arg [executive]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpexec(addr, words);
} else { /* EEPROM */
if (argc > 2)
usage(execname, "Too many args [eeprom]");
pic_dumpdata();
}
break;
case 'f': {
uint32_t words = UINT32_MAX, addr = UINT32_MAX;
if (argc > 4)
usage(execname, "Too many args [program flash]");
if (argc >= 3) {
words = strtoul(argv[2], NULL, 0);
if (words == 0)
usage(execname, "Invalid arg [program flash]");
}
if (argc == 4) {
addr = strtoul(argv[3], NULL, 0);
}
pic_dumpprogram(addr, words);
}
break;
case 'i': if (argc > 2)
usage(execname, "Too many args [id]");
pic_dumpdeviceid();
break;
case 'o': if (argc > 3)
usage(execname, "Too many args [osccal]");
if (argc == 2)
pic_dumposccal();
else
pic_writeosccal(strtoul(argv[2], NULL, 0));
break;
case 'p': {
int blank = 1;
if (argc > 4)
usage(execname, "Too many args [program]");
if (argc == 4) switch (argv[3][0]) {
case 'n':
case 'N':
case '0': blank = 0;
break;
case 'y':
case 'Y':
case '1': blank = 1;
break;
default:usage(execname, "invalid arg [program]");
break;
}
if (argc < 3)
pic_program("-", 1);
else
pic_program(argv[2], blank);
}
break;
case 'v': if (argv11 == 'i') { /* VIEW */
int raw = 0;
if (argc > 4)
usage(execname, "Too many args [view]");
if (argc == 4) switch (argv[3][0]) {
case 'r':
case 'R': raw = 1;
break;
default:usage(execname, "invalid arg [view]");
break;
}
if (argc < 3)
pic_view("-", 0);
else
pic_view(argv[2], raw);
} else { /* VERIFY */
if (argc > 3)
usage(execname, "Too many args [verify]");
if (argc < 3)
rc = 0 - pic_verify("-");
else
rc = 0 - pic_verify(argv[2]);
}
break;
#ifdef TTY
case '/': if (strstr(argv[1], "/dev/tty") != argv[1]) {
usage(execname, "Invalid device [TTY]");
}
if (strstr(argv[1], p.device) != NULL) {
usage(execname, "Device in use [TTY]");
}
stk500v2_listen(argv[1], 0);
break;
case '8': stk500v2_listen("0.0.0.0", 8048);
break;
#endif
default: usage(execname, "Unknown operation");
break;
}
free(execdup);
io_exit(rc);
}