// THINK - THIS IS A DESTRUCTOR
static PyObject*
pyndf_annul(NDF *self)
{
int status = SAI__OK;
errBegin(&status);
ndfAnnul(&self->_ndfid, &status);
if (raiseNDFException(&status)) return NULL;
Py_RETURN_NONE;
};
static void
NDF_dealloc(NDF* self)
{
int status = SAI__OK;
errBegin(&status);
if (self->_ndfid != NDF__NOID) ndfAnnul( &self->_ndfid, &status);
if (status != SAI__OK) errAnnul(&status);
errEnd(&status);
PyObject_Del( self );
}
void smurf_calcdark( int *status ) {
smfArray *bbms = NULL; /* Bad bolometer masks */
smfArray *darks = NULL; /* set of processed darks */
Grp *dgrp = NULL; /* Group of darks */
size_t i; /* Loop index */
int indf; /* NDF identifier for input file */
Grp *igrp = NULL; /* Input group of files */
Grp *ogrp = NULL; /* Output group of files */
size_t outsize; /* Total number of NDF names in the output group */
size_t size; /* Number of files in input group */
/* Main routine */
ndfBegin();
/* Get input file(s) */
kpg1Rgndf( "IN", 0, 1, "", &igrp, &size, status );
/* Filter out non-darks and reduce the darks themselves */
smf_find_science( igrp, NULL, 0, &dgrp, NULL, 1, 0, SMF__DOUBLE, &darks, NULL,
NULL, NULL, status );
/* no longer need the input group */
grpDelet( &igrp, status );
/* Get output file(s) */
size = grpGrpsz( dgrp, status );
kpg1Wgndf( "OUT", dgrp, size, size, "More output files required...",
&ogrp, &outsize, status );
/* Get group of bolometer masks and read them into a smfArray */
smf_request_mask( "BBM", &bbms, status );
for (i=1; i<=size && *status == SAI__OK; i++ ) {
smfData * dark = (darks->sdata)[i-1]; /* This dark */
/* Open input file and create output file. Do not propagate
since we do not want to get a large file the wrong size */
ndgNdfas( dgrp, i, "READ", &indf, status );
smf_apply_mask( dark, bbms, SMF__BBM_DATA, 0, status );
smf_write_smfData( dark, NULL, NULL, ogrp, i, indf, MSG__VERB, status );
ndfAnnul( &indf, status);
}
/* Tidy up after ourselves: release the resources used by the grp routines */
grpDelet( &dgrp, status);
grpDelet( &ogrp, status);
smf_close_related( &darks, status );
smf_close_related( &bbms, status );
ndfEnd( status );
}
void smurf_rawrewrtsc2wcs( int * status ) {
size_t i;
Grp *igrp = NULL; /* Input group */
size_t size; /* Number of files in input group */
if (*status != SAI__OK) return;
ndfBegin();
/* Read the input file group */
kpg1Rgndf( "NDF", 0, 1, "", &igrp, &size, status );
for (i=1; i<=size && ( *status == SAI__OK ); i++) {
int indf = NDF__NOID;
smfData *data = NULL;
AstFrameSet * fixedwcs = NULL;
int isok = 1;
/* First open in READ mode as a sanity check */
smf_open_file( igrp, i, "READ", 0, &data, status );
if (*status != SAI__OK) break;
if (data->hdr->instrument != INST__SCUBA2) {
isok = 0;
msgOut( "", "This command only works on SCUBA-2 data files", status );
}
/* Get a fixed WCS frameset */
if (isok) {
smf_create_tswcs( data->hdr, &fixedwcs, status );
}
/* close up and skip if this is not a good file */
smf_close_file( &data, status );
if (!isok) continue;
/* Now we try to update the file using NDF */
ndgNdfas( igrp, i, "UPDATE", &indf, status );
ndfPtwcs( fixedwcs, indf, status );
ndfAnnul( &indf, status );
}
/* Cleanup */
grpDelet( &igrp, status);
ndfEnd( status );
}
void smf_calc_mapcoord( ThrWorkForce *wf, AstKeyMap *config, smfData *data,
AstFrameSet *outfset, int moving, int *lbnd_out,
int *ubnd_out, fts2Port fts_port, int flags,
int *status ) {
/* Local Variables */
AstSkyFrame *abskyfrm = NULL;/* Output SkyFrame (always absolute) */
AstMapping *bolo2map=NULL; /* Combined mapping bolo->map coordinates */
int bndndf=NDF__NOID; /* NDF identifier for map bounds */
void *data_pntr[1]; /* Array of pointers to mapped arrays in ndf */
int *data_index; /* Mapped DATA_ARRAY part of NDF */
int docalc=1; /* If set calculate the LUT */
int doextension=0; /* Try to write LUT to MAPCOORD extension */
smfFile *file=NULL; /* smfFile pointer */
AstObject *fstemp = NULL; /* AstObject version of outfset */
int ii; /* loop counter */
int indf_lat = NDF__NOID; /* Identifier for NDF to receive lat values */
int indf_lon = NDF__NOID; /* Identifier for NDF to receive lon values */
smfCalcMapcoordData *job_data=NULL; /* Array of job */
int lbnd[1]; /* Pixel bounds for 1d pointing array */
int lbnd_old[2]; /* Pixel bounds for existing LUT */
int lbnd_temp[1]; /* Bounds for bounds NDF component */
int lutndf=NDF__NOID; /* NDF identifier for coordinates */
AstMapping *map2sky_old=NULL;/* Existing mapping map->celestial coord. */
HDSLoc *mapcoordloc=NULL; /* HDS locator to the MAPCOORD extension */
int nw; /* Number of worker threads */
AstFrameSet *oldfset=NULL; /* Pointer to existing WCS info */
AstSkyFrame *oskyfrm = NULL; /* SkyFrame from the output WCS Frameset */
smfCalcMapcoordData *pdata=NULL; /* Pointer to job data */
double *lat_ptr = NULL; /* Pointer to array to receive lat values */
double *lon_ptr = NULL; /* Pointer to array to receive lon values */
int ubnd[1]; /* Pixel bounds for 1d pointing array */
int ubnd_old[2]; /* Pixel bounds for existing LUT */
int ubnd_temp[1]; /* Bounds for bounds NDF component */
int *lut = NULL; /* The lookup table */
dim_t nbolo=0; /* Number of bolometers */
dim_t ntslice=0; /* Number of time slices */
int nmap; /* Number of mapped elements */
AstMapping *sky2map=NULL; /* Mapping celestial->map coordinates */
size_t step; /* step size for dividing up work */
AstCmpMap *testcmpmap=NULL; /* Combined forward/inverse mapping */
AstMapping *testsimpmap=NULL;/* Simplified testcmpmap */
double *theta = NULL; /* Scan direction at each time slice */
int tstep; /* Time slices between full Mapping calculations */
int exportlonlat; /* Dump longitude and latitude values? */
/* Main routine */
if (*status != SAI__OK) return;
/* How many threads do we get to play with */
nw = wf ? wf->nworker : 1;
/* Initialize bounds to avoid compiler warnings */
lbnd_old[0] = 0;
lbnd_old[1] = 0;
ubnd_old[0] = 0;
ubnd_old[1] = 0;
/* Check for pre-existing LUT and de-allocate it. This will only waste
time if the MAPCOORD extension is found to be valid and it has
to be re-loaded from disk. */
smf_close_mapcoord( data, status );
/* Assert ICD data order */
smf_dataOrder( data, 1, status );
/* Get the data dimensions */
smf_get_dims( data, NULL, NULL, &nbolo, &ntslice, NULL, NULL, NULL, status );
/* If SMF__NOCREATE_FILE is not set, and file associated with an NDF,
map a new MAPCOORD extension (or verify an existing one) */
if( !(flags & SMF__NOCREATE_FILE) && data->file ) {
doextension = 1;
} else {
doextension = 0;
docalc = 1;
}
/* Create / check for existing MAPCOORD extension */
if( doextension ) {
file = data->file;
/* Check type of file before proceeding */
if( file->isSc2store ) {
*status = SAI__ERROR;
errRep(FUNC_NAME,
"File was opened by sc2store library (raw data?)",
status);
}
if( !file->isTstream ) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "File does not contain time stream data",status);
}
/* Get HDS locator to the MAPCOORD extension */
mapcoordloc = smf_get_xloc( data, "MAPCOORD", "MAP_PROJECTION", "UPDATE",
0, 0, status );
/* Obtain NDF identifier/placeholder for LUT in MAPCOORD extension*/
lbnd[0] = 0;
ubnd[0] = nbolo*ntslice-1;
lutndf = smf_get_ndfid( mapcoordloc, "LUT", "UPDATE", "UNKNOWN",
"_INTEGER", 1, lbnd, ubnd, status );
if( *status == SAI__OK ) {
/* store the NDF identifier */
file->mapcoordid = lutndf;
/* Create sky to output grid mapping using the base coordinates to
get the coordinates of the tangent point if it hasn't been done
yet. */
sky2map = astGetMapping( outfset, AST__CURRENT, AST__BASE );
}
/* Before mapping the LUT, first check for existing WCS information
and LBND/UBND for the output map. If they are already correct don't
bother re-calculating the LUT! */
if( *status == SAI__OK ) {
/* Try reading in the WCS information */
kpg1Wread( mapcoordloc, "WCS", &fstemp, status );
oldfset = (AstFrameSet*)fstemp;
if( *status == SAI__OK ) {
/* Check that the old and new mappings are the same by
checking that combining one with the inverse of the other
reduces to a UnitMap. */
map2sky_old = astGetMapping( oldfset, AST__BASE, AST__CURRENT );
testcmpmap = astCmpMap( map2sky_old, sky2map, 1, " " );
testsimpmap = astSimplify( testcmpmap );
if( astIsAUnitMap( testsimpmap ) ) {
/* The mappings are the same, now just check the pixel
bounds in the output map */
lbnd_temp[0] = 1;
ubnd_temp[0] = 2;
bndndf = smf_get_ndfid( mapcoordloc, "LBND", "READ", "UNKNOWN",
"_INTEGER", 1, lbnd_temp, ubnd_temp,
status );
if( *status == SAI__OK ) {
ndfMap( bndndf, "DATA", "_INTEGER", "READ", data_pntr, &nmap,
status );
data_index = data_pntr[0];
if( *status == SAI__OK ) {
lbnd_old[0] = data_index[0];
lbnd_old[1] = data_index[1];
}
ndfAnnul( &bndndf, status );
}
bndndf = smf_get_ndfid( mapcoordloc, "UBND", "READ", "UNKNOWN",
"_INTEGER", 1, lbnd_temp, ubnd_temp,
status );
if( *status == SAI__OK ) {
ndfMap( bndndf, "DATA", "_INTEGER", "READ", data_pntr, &nmap,
status );
data_index = data_pntr[0];
if( *status == SAI__OK ) {
ubnd_old[0] = data_index[0];
ubnd_old[1] = data_index[1];
}
ndfAnnul( &bndndf, status );
}
if( *status == SAI__OK ) {
/* If we get this far finally do the bounds check! */
if( (lbnd_old[0] == lbnd_out[0]) &&
(lbnd_old[1] == lbnd_out[1]) &&
(ubnd_old[0] == ubnd_out[0]) &&
(ubnd_old[1] == ubnd_out[1]) ) {
docalc = 0; /* We don't have to re-calculate the LUT */
msgOutif(MSG__VERB," ",FUNC_NAME ": Existing LUT OK",
status);
}
}
}
/* Bad status / AST errors at this point due to problems with
MAPCOORD. Annul and continue calculating new MAPCOORD extension. */
astClearStatus;
errAnnul(status);
} else {
/* Bad status due to non-existence of MAPCOORD. Annul and continue */
errAnnul(status);
}
}
}
/* If we need to calculate the LUT do it here */
if( docalc && (*status == SAI__OK) ) {
msgOutif(MSG__VERB," ", FUNC_NAME ": Calculate new LUT",
status);
/* Get the increment in time slices between full Mapping calculations.
The Mapping for intermediate time slices will be approximated. */
dim_t dimval;
smf_get_nsamp( config, "TSTEP", data, &dimval, status );
tstep = dimval;
/* Get space for the LUT */
if( doextension ) {
/* Map the LUT array */
ndfMap( lutndf, "DATA", "_INTEGER", "WRITE", data_pntr, &nmap,
status );
data_index = data_pntr[0];
if( *status == SAI__OK ) {
lut = data_index;
} else {
errRep( FUNC_NAME, "Unable to map LUT in MAPCOORD extension",
status);
}
} else {
/* alloc the LUT and THETA arrays */
lut = astMalloc( (nbolo*ntslice)*sizeof(*(data->lut)) );
theta = astMalloc( ntslice*sizeof(*(data->theta)) );
}
/* Retrieve the sky2map mapping from the output frameset (actually
map2sky) */
oskyfrm = astGetFrame( outfset, AST__CURRENT );
sky2map = astGetMapping( outfset, AST__BASE, AST__CURRENT );
/* If the longitude and latitude is being dumped, create new NDFs to
hold them, and map them. */
if( config ) {
astMapGet0I( config, "EXPORTLONLAT", &exportlonlat );
if( exportlonlat ) {
lon_ptr = smf1_calc_mapcoord1( data, nbolo, ntslice, oskyfrm,
&indf_lon, 1, status );
lat_ptr = smf1_calc_mapcoord1( data, nbolo, ntslice, oskyfrm,
&indf_lat, 2, status );
}
}
/* Invert the mapping to get Output SKY to output map coordinates */
astInvert( sky2map );
/* Create a SkyFrame in absolute coordinates */
abskyfrm = astCopy( oskyfrm );
astClear( abskyfrm, "SkyRefIs" );
astClear( abskyfrm, "SkyRef(1)" );
astClear( abskyfrm, "SkyRef(2)" );
if( *status == SAI__OK ) {
/* --- Begin parellelized portion ------------------------------------ */
/* Start a new job context. Each call to thrWait within this
context will wait until all jobs created within the context have
completed. Jobs created in higher contexts are ignored by thrWait. */
thrBeginJobContext( wf, status );
/* Allocate job data for threads */
job_data = astCalloc( nw, sizeof(*job_data) );
if( *status == SAI__OK ) {
/* Set up job data, and start calculating pointing for blocks of
time slices in different threads */
if( nw > (int) ntslice ) {
step = 1;
} else {
step = ntslice/nw;
}
for( ii=0; (*status==SAI__OK)&&(ii<nw); ii++ ) {
pdata = job_data + ii;
/* Blocks of time slices */
pdata->t1 = ii*step;
pdata->t2 = (ii+1)*step-1;
/* Ensure that the last thread picks up any left-over tslices */
if( (ii==(nw-1)) && (pdata->t1<(ntslice-1)) ) {
pdata->t2=ntslice-1;
}
pdata->ijob = -1;
pdata->lut = lut;
pdata->theta = theta;
pdata->lbnd_out = lbnd_out;
pdata->moving = moving;
pdata->ubnd_out = ubnd_out;
pdata->tstep = tstep;
pdata->lat_ptr = lat_ptr;
pdata->lon_ptr = lon_ptr;
pdata->fts_port = fts_port;
/* Make deep copies of AST objects and unlock them so that each
thread can then lock them for their own exclusive use */
pdata->abskyfrm = astCopy( abskyfrm );
astUnlock( pdata->abskyfrm, 1 );
pdata->sky2map = astCopy( sky2map );
astUnlock( pdata->sky2map, 1 );
/* Similarly, make a copy of the smfData, including only the header
information which each thread will need in order to make calls to
smf_rebin_totmap */
pdata->data = smf_deepcopy_smfData( data, 0, SMF__NOCREATE_FILE |
SMF__NOCREATE_DA |
SMF__NOCREATE_FTS |
SMF__NOCREATE_DATA |
SMF__NOCREATE_VARIANCE |
SMF__NOCREATE_QUALITY, 0, 0,
status );
smf_lock_data( pdata->data, 0, status );
}
for( ii=0; ii<nw; ii++ ) {
/* Submit the job */
pdata = job_data + ii;
pdata->ijob = thrAddJob( wf, THR__REPORT_JOB, pdata,
smfCalcMapcoordPar, 0, NULL, status );
}
/* Wait until all of the jobs submitted within the current job
context have completed */
thrWait( wf, status );
}
/* End the current job context. */
thrEndJobContext( wf, status );
/* --- End parellelized portion -------------------------------------- */
/* Set the lut pointer in data to the buffer */
data->lut = lut;
data->theta = theta;
/* Write the WCS for the projection to the extension */
if( doextension ) {
kpg1Wwrt( (AstObject*)outfset, "WCS", mapcoordloc, status );
/* Write the pixel bounds for the map to the extension */
lbnd_temp[0] = 1; /* Don't get confused! Bounds for NDF that will */
ubnd_temp[0] = 2; /* contain the bounds for the output 2d map! */
bndndf = smf_get_ndfid( mapcoordloc, "LBND", "UPDATE", "UNKNOWN",
"_INTEGER", 1, lbnd_temp, ubnd_temp, status );
ndfMap( bndndf, "DATA", "_INTEGER", "WRITE", data_pntr, &nmap,
status );
data_index = data_pntr[0];
if( *status == SAI__OK ) {
data_index[0] = lbnd_out[0];
data_index[1] = lbnd_out[1];
} else {
errRep( FUNC_NAME, "Unable to map LBND in MAPCOORD extension",
status);
}
ndfAnnul( &bndndf, status );
bndndf = smf_get_ndfid( mapcoordloc, "UBND", "UPDATE", "UNKNOWN",
"_INTEGER", 1, lbnd_temp, ubnd_temp, status );
ndfMap( bndndf, "DATA", "_INTEGER", "WRITE", data_pntr, &nmap,
status );
data_index = data_pntr[0];
if( *status == SAI__OK ) {
data_index[0] = ubnd_out[0];
data_index[1] = ubnd_out[1];
} else {
errRep( FUNC_NAME, "Unable to map UBND in MAPCOORD extension",
status);
}
ndfAnnul( &bndndf, status );
}
}
}
/* Clean Up */
if( testsimpmap ) testsimpmap = astAnnul( testsimpmap );
if( testcmpmap ) testcmpmap = astAnnul( testcmpmap );
if( map2sky_old ) map2sky_old = astAnnul( map2sky_old );
if( oldfset ) oldfset = astAnnul( oldfset );
if (sky2map) sky2map = astAnnul( sky2map );
if (bolo2map) bolo2map = astAnnul( bolo2map );
if( abskyfrm ) abskyfrm = astAnnul( abskyfrm );
if( oskyfrm ) oskyfrm = astAnnul( oskyfrm );
if( mapcoordloc ) datAnnul( &mapcoordloc, status );
if( indf_lat != NDF__NOID ) ndfAnnul( &indf_lat, status );
if( indf_lon != NDF__NOID ) ndfAnnul( &indf_lon, status );
/* If we get this far, docalc=0, and status is OK, there must be
a good LUT in there already. Map it so that it is accessible to
the caller; "UPDATE" so that the caller can modify it if desired. */
if( (*status == SAI__OK) && (docalc == 0) ) {
smf_open_mapcoord( data, "UPDATE", status );
}
/* Clean up job data */
if( job_data ) {
for( ii=0; (*status==SAI__OK)&&(ii<nw); ii++ ) {
pdata = job_data + ii;
if( pdata->data ) {
smf_lock_data( pdata->data, 1, status );
smf_close_file( &(pdata->data), status );
}
astLock( pdata->abskyfrm, 0 );
pdata->abskyfrm = astAnnul( pdata->abskyfrm );
astLock( pdata->sky2map, 0 );
pdata->sky2map = astAnnul( pdata->sky2map );
}
job_data = astFree( job_data );
}
}
void smurf_jsatilelist( int *status ) {
/* Local Variables */
AstFitsChan *fc = NULL;
AstFrameSet *fs = NULL;
AstObject *obj;
AstRegion *region;
Grp *igrp = NULL;
Grp *sgrp = NULL;
double vertex_data[ 2*MAXVERT ];
int *tiles = NULL;
int i;
int indf;
int lbnd[2];
int ntile;
int nvert_dec;
int nvert_ra;
int ubnd[2];
size_t size;
size_t ssize;
smfJSATiling tiling;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Start a new AST context. */
astBegin;
/* Attempt to to get an AST Region. */
kpg1Gtobj( "IN", "Region",
(void (*)( void )) F77_EXTERNAL_NAME(ast_isaregion),
&obj, status );
region = (AstRegion *) obj;
/* If successful, attempt to access the IN parameter as an NDF. If this
works, we may be able to determine the instrument by looking at its
FITS extension. */
if( *status == SAI__OK && region ) {
ndfExist( "IN", "Read", &indf, status );
/* If we got an NDF, get a FitsChan holding the contents of its FITS
extension. Annul the error if the NDF has no FITS extension. */
if( indf != NDF__NOID ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
ndfAnnul( &indf, status );
}
/* Select a JSA instrument and get the parameters defining the layout of
tiles for the selected instrument. */
smf_jsainstrument( "INSTRUMENT", fc, SMF__INST_NONE, &tiling,
status );
/* Get the list of identifiers for tiles that overlap the region. */
tiles = smf_jsatiles_region( region, &tiling, &ntile, status );
/* If a null value was supplied for IN, attempt to get the positions of
vertices on the sky to define the region. */
} else if( *status == PAR__NULL ) {
errAnnul( status );
parGet1d( "VERTEX_RA", MAXVERT, vertex_data, &nvert_ra, status );
parGet1d( "VERTEX_DEC", MAXVERT, vertex_data + MAXVERT, &nvert_dec,
status );
if( nvert_ra != nvert_dec && *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "Differing numbers of RA (%d) and Dec (%d) vertex values "
"supplied.", status, nvert_ra, nvert_dec );
}
/* Convert from degrees to radians. */
for( i = 0; i < nvert_ra; i++ ) {
vertex_data[ i ] *= AST__DD2R;
vertex_data[ MAXVERT + i ] *= AST__DD2R;
}
/* Select a JSA instrument and get the parameters defining the layout of
tiles for the selected instrument. */
smf_jsainstrument( "INSTRUMENT", NULL, SMF__INST_NONE, &tiling,
status );
/* Create a frame in which to define the region - we arbitrarily use tile 1. */
smf_jsatile( 1, &tiling, 0, NULL, &fs, NULL, lbnd, ubnd, status );
/* Create the region. */
region = (AstRegion *) astPolygon( fs, nvert_ra, MAXVERT, vertex_data, NULL, " " );
/* If the region is unbounded, it is probably because the vertices were
given in the wrong order. Invert the Polyfon to correct this. */
if( !astGetI( region, "bounded" ) ) astNegate( region );
/* Get the list of identifiers for tiles that overlap the region. */
tiles = smf_jsatiles_region( region, &tiling, &ntile, status );
}
/* If the IN parameter could not be accessed as a Region, annull any error
and get a group of input data files. */
if( !region || *status == SAI__ERROR ) {
if( *status != SAI__OK ) errAnnul( status );
kpg1Rgndf( "IN", 0, 1, "", &igrp, &size, status );
/* Get a group containing just the files holding science data. */
smf_find_science( NULL, igrp, &sgrp, 0, NULL, NULL, 1, 1, SMF__NULL, NULL,
NULL, NULL, NULL, status );
/* Check we have at least once science file. */
ssize = grpGrpsz( sgrp, status );
if( ssize == 0 ) {
msgOutif( MSG__NORM, " ", "None of the supplied input frames were SCIENCE.",
status );
/* Get the list of identifiers for tiles that receive any data. */
} else {
tiles = smf_jsatiles_data( sgrp, ssize, &tiling, &ntile, status );
}
/* Delete the groups. */
if( igrp ) grpDelet( &igrp, status);
if( sgrp ) grpDelet( &sgrp, status);
}
/* Sort the list of overlapping tiles into ascending order. */
if( *status == SAI__OK ) {
qsort( tiles, ntile, sizeof( *tiles ), jsatilelist_icomp );
/* Display the list of overlapping tiles. */
msgBlank( status );
msgOutf( "", " %s tiles touched by supplied data:", status,
tiling.name );
msgBlank( status );
for( i = 0; i < ntile; i++ ) {
msgSeti( "I", tiles[ i ] );
msgOut( "", " ^I", status );
}
msgBlank( status );
/* Write out the list of overlapping tiles to the output parameter. */
parPut1i( "TILES", ntile, tiles, status );
}
/* Free resources. */
tiles = astFree( tiles );
/* End the AST context. */
astEnd;
/* Issue a status indication.*/
msgBlank( status );
if( *status == SAI__OK ) {
msgOutif( MSG__VERB, "", "JSATILELIST succeeded.", status);
} else {
msgOutif( MSG__VERB, "", "JSATILELIST failed.", status);
}
}
/* Main entry */
void smf_jsadicer( int indf, const char *base, int trim, smf_inst_t instrument,
smf_jsaproj_t proj, size_t *ntile, Grp *grp, int *status ){
/* Local Variables: */
AstBox *box;
AstFitsChan *fc;
AstFrame *specfrm = NULL;
AstFrame *tile_frm = NULL;
AstFrameSet *iwcs;
AstFrameSet *tfs = NULL;
AstFrameSet *tile_wcs;
AstMapping *ndf_map = NULL;
AstMapping *p2pmap = NULL;
AstMapping *specmap = NULL;
AstMapping *tile_map = NULL;
AstRegion *region;
Grp *grpt = NULL;
char *path;
char dtype[ NDF__SZFTP + 1 ];
char jsatile_comment[45];
char type[ NDF__SZTYP + 1 ];
const char *dom = NULL;
const char *keyword;
const char *latsys = NULL;
const char *lonsys = NULL;
double *pd;
double dlbnd[3];
double dubnd[3];
double gcen[3];
double lbnd_in[3];
double lbnd_out[3];
double ubnd_in[3];
double ubnd_out[3];
float *pf;
int *created_tiles = NULL;
int *tiles;
int axlat;
int axlon;
int axspec;
int bbox[ 6 ];
int i;
int ifrm;
int igrid;
int indfo;
int indfs;
int indfx;
int inperm[3];
int ipixel;
int ishpx;
int isxph;
int itile;
int ix;
int iy;
int iz;
int junk;
int latax = -1;
int lbnd[3];
int lbnd_tile[ 3 ];
int lbndx[ NDF__MXDIM ];
int lonax = -1;
int nbase;
int ndim;
int ndimx;
int nfrm;
int nsig;
int ntiles;
int olbnd[ 3 ];
int oubnd[ 3 ];
int outperm[ 3 ];
int place;
int qual;
int tile_index;
int tile_lbnd[2];
int tile_ubnd[2];
int ubnd[3];
int ubnd_tile[ 3 ];
int ubndx[ NDF__MXDIM ];
int var;
size_t iext;
size_t size;
smfJSATiling tiling;
unsigned char *ipq = NULL;
void *ipd = NULL;
void *ipv = NULL;
/* Initialise */
*ntile = 0;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context. */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Note the used length of the supplied base string. If it ends with
".sdf", reduce it by 4. */
nbase = astChrLen( base );
if( !strcmp( base + nbase - 4, ".sdf" ) ) nbase -= 4;
/* Allocate a buffer large enough to hold the full path for an output NDF. */
path = astMalloc( nbase + 25 );
/* Get the WCS from the NDF. */
kpg1Gtwcs( indf, &iwcs, status );
/* Note if the NDF projection is HPX or XPH. */
ishpx = astChrMatch( astGetC( iwcs, "Projection" ), "HEALPix" );
isxph = astChrMatch( astGetC( iwcs, "Projection" ), "polar HEALPix" );
/* Report an error if the NDFs projection is neither of these. */
if( !ishpx && !isxph && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( "", "The input NDF (^N) does not appear to be gridded "
"on the JSA all-sky pixel grid.", status );
}
/* Get the bounds of the NDF in pixel indices and the the corresponding
double precision GRID bounds (reduce the size of the grid by a small
amount to avoid problems with tiles that are on the edge of the valid sky
regions - astMapRegion can report an error for such tiles). Also store
the GRID coords of the centre. Also count the number of significant
pixel axes. */
ndfBound( indf, 3, lbnd, ubnd, &ndim, status );
nsig = 0;
for( i = 0; i < ndim; i++ ) {
dlbnd[ i ] = 0.5 + 0.1;
dubnd[ i ] = ubnd[ i ] - lbnd[ i ] + 1.5 - 0.1;
gcen[ i ] = 0.5*( dlbnd[ i ] + dubnd[ i ] );
if( ubnd[ i ] > lbnd[ i ] ) nsig++;
}
/* Find the one-based indices of the RA, Dec and spectral axes in the
current Frame of the NDF. */
axlon = 0;
if( astGetI( iwcs, "IsLonAxis(1)" ) ) {
axlon = 1;
lonsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLonAxis(2)" ) ) {
axlon = 2;
lonsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLonAxis(3)" ) ) {
axlon = 3;
lonsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the longitude axis in the "
"input NDF.", status );
}
axlat = 0;
if( astGetI( iwcs, "IsLatAxis(1)" ) ) {
axlat = 1;
latsys = astGetC( iwcs, "System(1)" );
} else if( astGetI( iwcs, "IsLatAxis(2)" ) ) {
axlat = 2;
latsys = astGetC( iwcs, "System(2)" );
} else if( ndim == 3 && astGetI( iwcs, "IsLatAxis(3)" ) ) {
axlat = 3;
latsys = astGetC( iwcs, "System(3)" );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: Cannot find the latitude axis in the "
"input NDF.", status );
}
axspec = 6 - axlon - axlat;
/* Report an error if the spatial axes are not ICRS RA and Dec. */
if( ( lonsys && strcmp( lonsys, "ICRS" ) ) ||
( latsys && strcmp( latsys, "ICRS" ) ) ) {
if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: The spatial axes in '^N' are not "
"ICRS RA and Dec.", status );
}
}
/* Create a Box describing the region covered by the NDF pixel grid in
GRID coords. */
box = astBox( astGetFrame( iwcs, AST__BASE ), 1, dlbnd, dubnd,
AST__NULL, " " );
/* Map this Box into the current WCS Frame of the NDF. */
region = astMapRegion( box, iwcs, iwcs );
/* If no instrument was specified, we will determine the instrument from
the contexts of the FITS extension. Copy the NDF FITS extension to a
FitsChan. Annul the error if the NDF no FITS extension. */
if( instrument == SMF__INST_NONE && *status == SAI__OK ) {
kpgGtfts( indf, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = NULL;
}
} else {
fc = NULL;
}
/* Get the parameters of the required tiling scheme. */
smf_jsainstrument( NULL, fc, instrument, &tiling, status );
/* Get a list of the JSA tiles touched by the supplied NDF. */
tiles = smf_jsatiles_region( region, &tiling, &ntiles, status );
if( ntiles == 0 && *status == SAI__OK ) {
*status = SAI__ERROR;
errRep( "", "smf_jsadicer: No JSA tiles found touching supplied NDF "
"(programming error).", status );
}
/* Does the input NDF have a Variance component? */
ndfState( indf, "Variance", &var, status );
/* Does the input NDF have a Quality component? */
ndfState( indf, "Quality", &qual, status );
/* Decide on the data type to use: _REAL or _DOUBLE. */
ndfMtype( "_REAL,_DOUBLE", indf, indf, "Data", type, sizeof(type), dtype,
sizeof(dtype), status );
/* Tell the user what is happening. */
msgBlank( status );
msgOutf( "", "Dicing %s into JSA tiles:", status,
( nsig == 2 ) ? "map" : "cube" );
/* Loop round all tiles that overlap the supplied NDF. */
for( itile = 0; itile < ntiles && *status == SAI__OK; itile++ ) {
tile_index = tiles[ itile ];
/* Get the spatial pixel bounds of the current tile within the requested
JSA all-sky projection. Also get the (2D) WCS FrameSet for the tile. */
smf_jsatile( tile_index, &tiling, 0, proj, NULL, &tile_wcs, NULL,
tile_lbnd, tile_ubnd, status );
/* Extract the tile pixel->WCS mapping and WCS Frame. We know the indices
of the required Frames because they are hard-wired in smf_jsatile. */
tile_map = astGetMapping( tile_wcs, 3, 2 );
tile_frm = astGetFrame( tile_wcs, 2 );
/* Find the indices of the grid and pixel frames in the input NDF. */
ipixel = -1;
igrid = astGetI( iwcs, "Base" );
nfrm = astGetI( iwcs, "NFrame" );
for( ifrm = 0; ifrm < nfrm; ifrm++ ) {
dom = astGetC( astGetFrame( iwcs, ifrm + 1 ), "Domain" );
if( astChrMatch( dom, "PIXEL" ) ) ipixel = ifrm + 1;
}
/* If required, extract the pixel->spectral mapping and spectral frame in
the input NDF, and add it in parallel with the above tile mapping. */
if( ndim == 3 ) {
astSetI( iwcs, "Base", ipixel );
tfs = atlFrameSetSplit( iwcs, "DSBSPECTRUM SPECTRUM", NULL,
NULL, status );
astSetI( iwcs, "Base", igrid );
if( tfs ) {
specmap = astGetMapping( tfs, AST__BASE, AST__CURRENT );
specfrm = astGetFrame( tfs, AST__CURRENT );
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", indf );
errRep( "", "smf_jsadicer: Cannot find the spectral axis "
"in '^N'.", status );
}
tile_map = (AstMapping *) astCmpMap( tile_map, specmap, 0, " " );
tile_frm = (AstFrame *) astCmpFrame( tile_frm, specfrm, " " );
}
/* Ensure the Epoch is inherited form the input NDF. */
astSetD( tile_frm, "Epoch", astGetD( iwcs, "Epoch" ) );
/* Currently tile axis 1 is RA, axis 2 is Dec and axis 3 (if present) is
spectral. Append a PermMap that re-orders these tile WCS axes to match
those of the NDF. */
outperm[ axlon - 1 ] = 1;
outperm[ axlat - 1 ] = 2;
outperm[ axspec - 1 ] = 3;
inperm[ 0 ] = axlon;
inperm[ 1 ] = axlat;
inperm[ 2 ] = axspec;
tile_map = (AstMapping *) astCmpMap( tile_map, astPermMap( ndim, inperm,
ndim, outperm,
NULL, " " ),
1, " " );
tile_map = astSimplify( tile_map );
/* Also re-order the WCS axes in the tile frame. */
astPermAxes( tile_frm, outperm );
/* We want the zero-based indicies of the input pixel axes corresponding
to ra, dec and spectral. So find the indicies of the pixel axes in the
supplied NDF that are most closely aligned with each WCS axis. */
atlPairAxes( iwcs, NULL, gcen, NULL, inperm, status );
if( inperm[ 0 ] == axlon ) {
lonax = 0;
} else if( inperm[ 1 ] == axlon ) {
lonax = 1;
} else {
lonax = 2;
}
if( inperm[ 0 ] == axlat ) {
latax = 0;
} else if( inperm[ 1 ] == axlat ) {
latax = 1;
} else {
latax = 2;
}
/* To get the mapping from pixel coords in the input NDF to pixel coords
in the output NDF, we invert the above mapping so that it goes from WCS
to pixel, and append it to the end of the NDF pixel->WCS mapping. */
ndf_map = astGetMapping( iwcs, ipixel, AST__CURRENT );
astInvert( tile_map );
p2pmap = (AstMapping *) astCmpMap( ndf_map, tile_map, 1, " " );
p2pmap = astSimplify( p2pmap );
astInvert( tile_map );
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the output NDF.", status, tile_index,
tile_lbnd[ 0 ], tile_ubnd[ 0 ], tile_lbnd[ 1 ],
tile_ubnd[ 1 ] );
/* Next job is to find the pixel bounds of the output NDF to create
which will hold data for the current tile. First map the pixel bounds
of the whole tile from output to input. */
lbnd_in[ 0 ] = tile_lbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = tile_lbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = lbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = tile_ubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = tile_ubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = ubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 0, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
lbnd_tile[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
lbnd_tile[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
lbnd_tile[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
ubnd_tile[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
ubnd_tile[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
ubnd_tile[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Show the bounds of the tile within the input NDF. */
msgOutiff( MSG__DEBUG, "", " tile %d has bounds (%d:%d,%d:%d) "
"within the input NDF.", status, tile_index,
lbnd_tile[ 0 ], ubnd_tile[ 0 ], lbnd_tile[ 1 ],
ubnd_tile[ 1 ] );
/* If required, trim the bounds to the extent of the input NDF. */
if( trim ) {
if( lbnd_tile[ 0 ] < lbnd[ 0 ] ) lbnd_tile[ 0 ] = lbnd[ 0 ];
if( lbnd_tile[ 1 ] < lbnd[ 1 ] ) lbnd_tile[ 1 ] = lbnd[ 1 ];
if( lbnd_tile[ 2 ] < lbnd[ 2 ] ) lbnd_tile[ 2 ] = lbnd[ 2 ];
if( ubnd_tile[ 0 ] > ubnd[ 0 ] ) ubnd_tile[ 0 ] = ubnd[ 0 ];
if( ubnd_tile[ 1 ] > ubnd[ 1 ] ) ubnd_tile[ 1 ] = ubnd[ 1 ];
if( ubnd_tile[ 2 ] > ubnd[ 2 ] ) ubnd_tile[ 2 ] = ubnd[ 2 ];
}
/* Check there is some overlap. */
if( lbnd_tile[ 0 ] <= ubnd_tile[ 0 ] &&
lbnd_tile[ 1 ] <= ubnd_tile[ 1 ] &&
lbnd_tile[ 2 ] <= ubnd_tile[ 2 ] ){
/* Now need to check if this section of the input NDF contains any good
values. We also find the bounding box of the good values (within the
input pixel coordinate system). So first obtain and map the required
section of the input NDF. */
ndfSect( indf, ndim, lbnd_tile, ubnd_tile, &indfs, status );
ndfMap( indfs, "Data", type, "Read", &ipd, &junk, status );
if( var ) ndfMap( indfs, "Variance", type, "Read", &ipv, &junk, status );
if( qual ) ndfMap( indfs, "Quality", "_UBYTE", "Read", (void **) &ipq,
&junk, status );
/* Initialise the pixel bounds (within the input NDF) of the box holding
good data values for the current tile. */
bbox[ 0 ] = INT_MAX;
bbox[ 1 ] = INT_MAX;
bbox[ 2 ] = INT_MAX;
bbox[ 3 ] = -INT_MAX;
bbox[ 4 ] = -INT_MAX;
bbox[ 5 ] = -INT_MAX;
/* Loop round all pixels in the section. */
if( *status == SAI__OK ) {
if( !strcmp( type, "_REAL" ) ) {
pf = (float *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pf++) != VAL__BADR ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
} else {
pd = (double *) ipd;
for( iz = lbnd_tile[ 2 ]; iz <= ubnd_tile[ 2 ]; iz++ ) {
for( iy = lbnd_tile[ 1 ]; iy <= ubnd_tile[ 1 ]; iy++ ) {
for( ix = lbnd_tile[ 0 ]; ix <= ubnd_tile[ 0 ]; ix++ ) {
if( *(pd++) != VAL__BADD ) {
if( ix < bbox[ 0 ] ) bbox[ 0 ] = ix;
if( iy < bbox[ 1 ] ) bbox[ 1 ] = iy;
if( iz < bbox[ 2 ] ) bbox[ 2 ] = iz;
if( ix > bbox[ 3 ] ) bbox[ 3 ] = ix;
if( iy > bbox[ 4 ] ) bbox[ 4 ] = iy;
if( iz > bbox[ 5 ] ) bbox[ 5 ] = iz;
}
}
}
}
}
/* Skip empty tiles. */
if( bbox[ 0 ] != INT_MAX ) {
msgOutf( "", " tile %d", status, tile_index );
/* If required, trim the bounds to the edges of the bounding box. */
if( trim >= 2 ) {
olbnd[ 0 ] = bbox[ 0 ];
olbnd[ 1 ] = bbox[ 1 ];
olbnd[ 2 ] = bbox[ 2 ];
oubnd[ 0 ] = bbox[ 3 ];
oubnd[ 1 ] = bbox[ 4 ];
oubnd[ 2 ] = bbox[ 5 ];
} else {
olbnd[ 0 ] = lbnd_tile[ 0 ];
olbnd[ 1 ] = lbnd_tile[ 1 ];
olbnd[ 2 ] = lbnd_tile[ 2 ];
oubnd[ 0 ] = ubnd_tile[ 0 ];
oubnd[ 1 ] = ubnd_tile[ 1 ];
oubnd[ 2 ] = ubnd_tile[ 2 ];
}
/* Modify these pixel bounds so that they refer to the output NDF. */
lbnd_in[ 0 ] = olbnd[ 0 ] - 0.5;
lbnd_in[ 1 ] = olbnd[ 1 ] - 0.5;
lbnd_in[ 2 ] = olbnd[ 2 ] - 0.5;
ubnd_in[ 0 ] = oubnd[ 0 ] - 0.5;
ubnd_in[ 1 ] = oubnd[ 1 ] - 0.5;
ubnd_in[ 2 ] = oubnd[ 2 ] - 0.5;
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 1, lbnd_out + 0,
ubnd_out + 0, NULL, NULL );
astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 2, lbnd_out + 1,
ubnd_out + 1, NULL, NULL );
if( ndim == 3 ) astMapBox( p2pmap, lbnd_in, ubnd_in, 1, 3,
lbnd_out + 2, ubnd_out + 2, NULL,
NULL );
olbnd[ 0 ] = floor( lbnd_out[ 0 ] ) + 1;
olbnd[ 1 ] = floor( lbnd_out[ 1 ] ) + 1;
olbnd[ 2 ] = floor( lbnd_out[ 2 ] ) + 1;
oubnd[ 0 ] = floor( ubnd_out[ 0 ] ) + 1;
oubnd[ 1 ] = floor( ubnd_out[ 1 ] ) + 1;
oubnd[ 2 ] = floor( ubnd_out[ 2 ] ) + 1;
/* Get the full path to the output NDF for the current tile, and create an
NDF placeholder for it. */
sprintf( path, "%.*s_%d", nbase, base, tile_index );
ndfPlace( NULL, path, &place, status );
/* Create a new output NDF by copying the meta-data from the input NDF
section. */
ndfScopy( indfs, "Units", &place, &indfo, status );
/* Set the pixel bounds of the output NDF to the values found above and copy
the input data for the current tile into it. */
smf1_jsadicer( indfo, olbnd, oubnd, tile_map, tile_frm, p2pmap,
ipd, ipv, ipq, status );
/* Add the name of this output NDF to the group holding the names of the
output NDFs that have actually been created. */
if( grp ) grpPut1( grp, path, 0, status );
/* Add a TILENUM header to the output FITS extension. */
kpgGtfts( indfo, &fc, status );
if( *status == KPG__NOFTS ) {
errAnnul( status );
fc = astFitsChan( NULL, NULL, " " );
/* If the last card is "END", remove it. */
} else {
astSetI( fc, "Card", astGetI( fc, "NCARD" ) );
keyword = astGetC( fc, "CardName" );
if( keyword && !strcmp( keyword, "END" ) ) astDelFits( fc );
}
one_snprintf(jsatile_comment, 45, "JSA all-sky tile index (Nside=%i)",
status, tiling.ntpf);
atlPtfti( fc, "TILENUM", tile_index, jsatile_comment, status );
kpgPtfts( indfo, fc, status );
fc = astAnnul( fc );
/* Now store an STC-S polygon that describes the shortest boundary
enclosing the good data in the output NDF, and store it as an NDF extension. */
kpgPutOutline( indfo, 0.5, 1, status );
/* We now reshape any extension NDFs contained within the output NDF to
have the same spatial bounds as the main NDF (but only for extension
NDFs that originally have the same spatial bounds as the supplied NDF).
Get a group containing paths to all extension NDFs in the output NDF. */
ndgMoreg( indfo, &grpt, &size, status );
/* Loop round each output extension NDF. */
for( iext = 1; iext <= size && *status == SAI__OK; iext++ ) {
ndgNdfas( grpt, iext, "Update", &indfx, status );
/* Get its bounds. */
ndfBound( indfx, NDF__MXDIM, lbndx, ubndx, &ndimx, status );
/* See if this extension NDF has the same bounds on the spatial axes as
the supplied NDF. */
if( ndimx > 1 && lbndx[ lonax ] == lbnd[ lonax ] &&
lbndx[ latax ] == lbnd[ latax ] &&
ubndx[ lonax ] == ubnd[ lonax ] &&
ubndx[ latax ] == ubnd[ latax ] ) {
/* If so, change the bounds of the output extension NDF so that they are
the same as the main NDF on the spatial axes, and map the original
contents of the NDF onto the new pixel grid. */
smf1_jsadicer( indfx, olbnd, oubnd, tile_map, tile_frm, p2pmap,
NULL, NULL, NULL, status );
}
/* Annul the extension NDF identifier. */
ndfAnnul( &indfx, status );
}
/* Free resources associated with the current tile. */
grpDelet( &grpt, status );
ndfAnnul( &indfo, status );
/* Issue warnings about empty tiles. */
} else {
msgOutiff( MSG__VERB, "", " tile %d is empty and so will not be "
"created", status, tile_index );
}
}
/* Free the section of the input NDF. */
ndfAnnul( &indfs, status );
/* Append the index of this tile in the list of tiles to be created. */
created_tiles = astGrow( created_tiles, ++(*ntile),
sizeof( *created_tiles ) );
if( *status == SAI__OK ) created_tiles[ *ntile - 1 ] = tile_index;
} else {
msgOutiff( MSG__DEBUG, "", " Tile %d does not overlap the input "
"NDF after trimming.", status, tile_index );
}
}
msgBlank( status );
/* Write the indicies of the created tiles out to a parameter. */
if( *ntile ) parPut1i( "JSATILELIST", *ntile, created_tiles, status );
/* Free resources. */
created_tiles = astFree( created_tiles );
tiles = astFree( tiles );
path = astFree( path );
/* End the NDF context. */
ndfEnd( status );
/* End the AST context. */
astEnd;
}
void smf_subip( ThrWorkForce *wf, smfArray *res, smfArray *lut, int *lbnd_out,
int *ubnd_out, AstKeyMap *keymap, AstFrameSet *outfs, int *status ) {
/* Local Variables: */
HDSLoc *loc = NULL;
HDSLoc *sloc = NULL;
SmfSubIPData *job_data = NULL;
SmfSubIPData *pdata;
char ipref[200];
char subname[10];
const char *ipdata;
const char *qu;
dim_t bolostep;
dim_t nbolo;
dim_t ntslice;
double *angcdata;
double *c0data;
double *imapdata;
double *ipang;
double *p0data;
double *p1data;
int angcndf;
int c0ndf;
int imapndf;
int iw;
int nmap;
int nw;
int p0ndf;
int p1ndf;
size_t bstride;
size_t idx;
size_t tstride;
smfData *data;
smf_qual_t *qua_data;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Check if we have pol2 data, and see if it is Q or U. */
qu = NULL;
for( idx = 0; idx < res->ndat; idx++ ) {
data = res->sdata[idx];
if( !strcmp( data->hdr->dlabel, "Q" ) ){
if( !qu ) {
qu = "Q";
} else if( strcmp( qu, "Q" ) ) {
*status = SAI__ERROR;
break;
}
} else if( !strcmp( data->hdr->dlabel, "U" ) ) {
if( !qu ) {
qu = "U";
} else if( strcmp( qu, "U" ) ) {
*status = SAI__ERROR;
break;
}
} else if( qu ) {
*status = SAI__ERROR;
qu = NULL;
break;
}
}
/* Report an error if there is a mix of pol2 and non-pol2, or a mix of Q
and U. */
if( *status != SAI__OK ) {
if( qu ) {
errRep( "", "smf_subip: Input data contains mix of Q and U "
"data", status );
} else {
errRep( "", "smf_subip: Input data contains mix of POL2 and "
"non-POL2 data", status );
}
/* If we have pol2 data, get the path to the total intensity image that
is to be used to define the level of IP correction required. If no
value is supplied, annul the error and set "qu" NULL to indicate we should
leave immediately. */
} else if( qu && *status == SAI__OK ) {
parGet0c( "IPREF", ipref, sizeof(ipref), status );
if( *status == PAR__NULL ) {
errAnnul( status );
qu = NULL;
}
}
/* If we are applying IP correction... */
if( qu && *status == SAI__OK ) {
msgOutf( "", "smf_subip: applying instrumental polarisation %s "
"correction based on total intensity map `%s'", status,
qu, ipref );
/* Get an identifier for the IPREF NDF. */
ndfFind( NULL, ipref, &imapndf, status );
/* Resample the NDFs data values onto the output map grid. */
imapdata = smf_alignndf( imapndf, outfs, lbnd_out, ubnd_out,
status );
/* Annul the NDF identifier. */
ndfAnnul( &imapndf, status );
/* Create structures used to pass information to the worker threads. */
nw = wf ? wf->nworker : 1;
job_data = astMalloc( nw*sizeof( *job_data ) );
/* Get the path to the container file holding the IP model parameters. */
ipdata = "$STARLINK_DIR/share/smurf/ipdata.sdf";
astMapGet0C( keymap, "IPDATA", &ipdata );
/* Open the container file. */
hdsOpen( ipdata, "READ", &loc, status );
/* Do the IP correction for each subarray (s8a, s8b, etc) in turn. */
for( idx = 0; idx < res->ndat && *status == SAI__OK; idx++ ) {
data = res->sdata[idx];
/* Get an array holding the angle (rad.s) from north to focal plane Y,
measured positive in the sense of rotation from focal plane Y to focal
plane X, for every bolometer sample in the smfData. The values are bolo
ordered so that "bstride" is 1 and "tstsride" is nbolo. */
ipang = smf1_calcang( data, status );
/* Get the number of bolometers and time slices for the current subarray,
together with the strides between adjacent bolometers and adjacent
time slices. */
smf_get_dims( data, NULL, NULL, &nbolo, &ntslice, NULL, &bstride,
&tstride, status );
/* Get a locator for the structure holding the IP parameters for the
current subarray */
smf_find_subarray( data->hdr, subname, sizeof( subname ), NULL,
status );
datFind( loc, subname, &sloc, status );
/* Begin an NDF context. */
ndfBegin();
/* Get identifiers for the NDFs holding the individual parameters. Each
NDF holds a parameter value for each bolometer. */
ndfFind( sloc, "P0", &p0ndf, status );
ndfFind( sloc, "P1", &p1ndf, status );
ndfFind( sloc, "C0", &c0ndf, status );
ndfFind( sloc, "ANGC", &angcndf, status );
/* Map them. Check each one has the expected number of elements. */
ndfMap( p0ndf, "DATA", "_DOUBLE", "READ", (void **) &p0data,
&nmap, status );
if( nmap != (int) nbolo && *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", p0ndf );
errRep( "", "smf_subip: Bad dimensions for ^N - should be 32x40.", status );
}
ndfMap( p1ndf, "DATA", "_DOUBLE", "READ", (void **) &p1data,
&nmap, status );
if( nmap != (int) nbolo && *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", p1ndf );
errRep( "", "smf_subip: Bad dimensions for ^N - should be 32x40.", status );
}
ndfMap( c0ndf, "DATA", "_DOUBLE", "READ", (void **) &c0data,
&nmap, status );
if( nmap != (int) nbolo && *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", c0ndf );
errRep( "", "smf_subip: Bad dimensions for ^N - should be 32x40.", status );
}
ndfMap( angcndf, "DATA", "_DOUBLE", "READ", (void **) &angcdata,
&nmap, status );
if( nmap != (int) nbolo && *status == SAI__OK ) {
*status = SAI__ERROR;
ndfMsg( "N", angcndf );
errRep( "", "smf_subip: Bad dimensions for ^N - should be 32x40.", status );
}
/* Get a pointer to the quality array for the residuals. */
qua_data = smf_select_qualpntr( data, NULL, status );
/* See how many bolometers to process in each thread. */
bolostep = nbolo/nw;
if( bolostep == 0 ) bolostep = 1;
/* Create jobs to apply the IP correction to a range of bolometers. */
for( iw = 0; iw < nw; iw++ ) {
pdata = job_data + iw;
/* Set the range of bolometers (b1 to b2) to be processed by the current
job. */
pdata->b1 = iw*bolostep;
if( iw < nw - 1 ) {
pdata->b2 = pdata->b1 + bolostep - 1;
} else {
pdata->b2 = nbolo - 1 ;
}
/* Store the other info needed by the worker thread. */
pdata->ntslice = ntslice;
pdata->nbolo = nbolo;
pdata->res_data = res->sdata[idx]->pntr[0];
pdata->lut_data = lut->sdata[idx]->pntr[0];
pdata->qua_data = qua_data;
pdata->ipang = ipang;
pdata->bstride = bstride;
pdata->tstride = tstride;
pdata->imapdata = imapdata;
pdata->qu = qu;
pdata->p0data = p0data;
pdata->p1data = p1data;
pdata->c0data = c0data;
pdata->angcdata = angcdata;
pdata->allstate = data->hdr->allState;
/* Submit the job for execution by the next available thread. */
thrAddJob( wf, 0, pdata, smf1_subip, 0, NULL, status );
}
/* Wait for all jobs to complete. */
thrWait( wf, status );
/* End the NDF context, thus unmapping and freeing all NDF identifiers
created since the context was started. */
ndfEnd( status );
/* Free locator for subarray IP parameters. */
datAnnul( &sloc, status );
ipang = astFree( ipang );
}
/* Free resources. */
datAnnul( &loc, status );
imapdata = astFree( imapdata );
job_data = astFree( job_data );
}
}
int *smf_find_bad_dets( Grp *igrp, int size, int *nbaddet, int *status ){
/* Local Variables */
float *p = NULL;
int *result;
int dims[ 3 ];
int el;
int i;
int ifile;
int indf;
int j;
int k;
int ndim;
int outlen;
/* Initialise returned values. */
*nbaddet = 0;
result = NULL;
outlen = 0;
/* Check inherited status */
if( *status != SAI__OK ) return result;
/* Loop round all the input NDFs. */
for( ifile = 1; ifile <= size && *status == SAI__OK; ifile++ ) {
/* Get an NDF identifier for the input NDF. */
ndgNdfas( igrp, ifile, "READ", &indf, status );
/* Get the dimensions of the NDF. */
ndfDim( indf, 3, dims, &ndim, status );
/* If the returned array is shorter than the number of detectors in this
NDF, extend the returned array and initialise the new elements to
zero. */
if( outlen < dims[ 1 ] ) {
result = astGrow( result, dims[ 1 ], sizeof( int ) );
if( astOK ) {
for( i = outlen; i < dims[ 1 ]; i++ ) result[ i ] = 0;
outlen = dims[ 1 ];
}
}
/* Map the data array of the NDF. */
ndfMap( indf, "Data", "_REAL", "READ", (void *) &p, &el, status );
/* Loop round all elements of the NDF. */
for( k = 0; k < dims[ 2 ]; k++ ) {
for( j = 0; j < dims[ 1 ]; j++ ) {
for( i = 0; i < dims[ 0 ]; i++ ) {
/* If this data value is good, indicate that the detector has some good
values, and break out of the "i" loop to move on to the next spectrum. */
if( *p != VAL__BADR ) {
result[ j ] = 1;
p += dims[ 0 ] - i;
break;
} else {
p++;
}
}
}
}
/* Annul the input NDF identifier. */
ndfAnnul( &indf, status );
}
/* Count the number of bad detectors. */
for( i = 0; i < outlen; i++ ) {
if( result[ i ] == 0 ) (*nbaddet)++;
}
/* Return the result. */
return result;
}
void smf_flat_write( smf_flatmeth flatmeth, const char * flatname,
double refres, const smfData * bolval,
const smfData * powref, const smfData * bolref,
const smfData * polyfit, const Grp * prvgrp, int * status ) {
size_t colsize; /* number of columns */
double *dbuf = NULL; /* input double buffer for mean data */
double *dvar = NULL; /* input double buffer for variance of data */
char fitsrec[SC2STORE__MAXFITS*SZFITSCARD+1]; /* Store for FITS records */
int *ibuf = NULL; /* int buffer for mean data */
int indf = NDF__NOID; /* NDF identifier for output file */
size_t ncards; /* number of fits cards */
size_t numbols; /* number of bolometers */
double *outvar = NULL; /* buffer for variance of data */
int place = NDF__NOPL; /* Dummy placeholder for NDF */
size_t rowsize; /* number of rows */
JCMTState *state = NULL; /* State for this flatfield */
sc2ast_subarray_t subnum; /* subarray number */
AstFrameSet *result, *spacefset;
AstLutMap *heatmap;
AstFrame *heatfrm;
int *dksquid; /* pointer to dummy dark SQUID data */
size_t j; /* loop counter */
int jig_vert[1][2]; /* dummy jiggle vertices */
double jig_path[1][2]; /* dummy jiggle path */
size_t nframes = 0; /* Number of frames in bolval */
int npath = 0; /* size of jiggle path */
int nvert = 0; /* number of jiggle vertices */
char *xmlfile = NULL; /* dummy xmlfile name */
if (*status != SAI__OK) return;
if (!bolval->da) {
*status = SAI__ERROR;
errRep( "", "No flatfield solution provided for writing",
status );
return;
}
if (!bolval->da->heatval) {
*status = SAI__ERROR;
errRep( "", "Must provide heater values in DA struct to smf_flat_write"
" (possible programming error)", status );
return;
}
/* note that colsize is the number of rows and rowsize is the number of
columns */
colsize = (bolval->dims)[SC2STORE__ROW_INDEX];
rowsize = (bolval->dims)[SC2STORE__COL_INDEX];
numbols = colsize * rowsize;
nframes = (bolval->dims)[2];
/* Make sure we have a FLAT header that reflects this file
as the flatfield solution */
smf_fits_updateS( bolval->hdr, "FLAT", flatname, "Name of flat-field file",
status );
/* Create a FITS header for DA */
smf_fits_export2DA( bolval->hdr->fitshdr, &ncards, fitsrec, status );
/* Copy the data as integers so it can be written to data file. To
prevent overflow in the variance we store that as doubles */
ibuf = astMalloc( (numbols * nframes)*sizeof(*ibuf) );
outvar = astMalloc( (numbols * nframes)*sizeof(*outvar) );
dbuf = (bolval->pntr)[0];
dvar = (bolval->pntr)[1];
if (*status == SAI__OK) {
for (j = 0; j < (nframes * numbols); j++) {
/* These started off as integers so the mean value must fit in
an integer */
if ( dbuf[j] == VAL__BADD) {
ibuf[j] = VAL__BADI;
} else {
ibuf[j] = (int)dbuf[j];
}
/* Same data type so no need to convert bad values */
if (dvar) {
outvar[j] = dvar[j];
} else {
outvar[j] = VAL__BADD;
}
}
}
/* get subarray number */
smf_find_subarray( bolval->hdr, NULL, 0, &subnum, status );
/* Create dummy components for output file */
dksquid = astCalloc ( rowsize* nframes, sizeof(*dksquid) );
jig_vert[0][0] = 0;
jig_vert[0][1] = 0;
jig_path[0][0] = 0.0;
jig_path[0][1] = 0.0;
sc2store_setcompflag ( SC2STORE__NONE, status );
sc2store_wrtstream ( flatname, subnum, ncards,
fitsrec, colsize, rowsize, nframes,
(bolref->dims)[2], refres, 0, smf_flat_methstring( flatmeth, status ),
bolval->hdr->allState, NULL,
ibuf, dksquid, (bolref->pntr)[0], (powref->pntr)[0],
"FLATCAL", NULL, NULL, jig_vert,
nvert, jig_path, npath, xmlfile, status );
sc2store_free ( status );
/* To copy in the variance and modify fix up the WCS we need to reopen
the file */
ndfOpen( NULL, flatname, "UPDATE", "OLD", &indf, &place, status );
/* make sure that history is not written twice */
ndfHsmod( "SKIP", indf, status );
if (outvar) {
void *pntr[3];
int el;
ndfStype( "_DOUBLE", indf, "VARIANCE", status );
ndfMap( indf, "VARIANCE", "_DOUBLE", "WRITE", pntr, &el, status );
if (*status == SAI__OK) {
memcpy( pntr[0], outvar, sizeof(*outvar)*el );
}
}
/* For the WCS a time frame is less relevant than heater settings */
astBegin;
/* Create frame for focal plane coordinates */
sc2ast_createwcs( subnum, NULL, NULL, NULL, NO_FTS, &spacefset, status );
/* Copy it to make sure we do not mess with the cache */
result = astCopy( spacefset );
/* and switch to BOLO frame which is best for bolometer analysis */
{
int frnum = AST__NOFRAME;
kpg1Asffr( result, "BOLO", &frnum, status );
if (frnum != AST__NOFRAME) astSetI( result, "CURRENT", frnum );
}
/* Create a simple frame for heater settings */
heatfrm = astFrame( 1, "Domain=HEATER,Label(1)=Heater Setting" );
heatmap = astLutMap( nframes, bolval->da->heatval, 1.0, 1.0, " " );
/* Append the heater axis to the spatial frameset */
atlAddWcsAxis( result, (AstMapping *)heatmap, (AstFrame *) heatfrm,
NULL, NULL, status );
/* write it to the NDF */
ndfPtwcs( result, indf, status );
/* Write provenance information */
if (prvgrp) {
size_t size = grpGrpsz( prvgrp, status );
char prvname[ 2 * PAR__SZNAM + 1];
smf_get_taskname( NULL, prvname, status );
for (j=1; j<=size; j++) {
smf_accumulate_prov( NULL, prvgrp, j, indf, prvname, NULL, status );
}
}
/* Write the polynomial expansion into an extension */
if (polyfit) {
char fitfile[GRP__SZNAM+1];
int fndf = NDF__NOID;
place = NDF__NOPL;
one_strlcpy( fitfile, flatname, sizeof(fitfile), status );
one_strlcat( fitfile, ".MORE.SMURF.FLATFIT", sizeof(fitfile), status );
/* create the file */
smf_write_smfData( polyfit, NULL, fitfile, NULL, 0, NDF__NOID,
MSG__VERB, 0, status );
/* Same WCS as the main file */
ndfOpen( NULL, fitfile, "UPDATE", "OLD", &fndf, &place, status );
ndfPtwcs( result, fndf, status );
ndfAnnul( &fndf, status );
}
astEnd;
ndfAnnul( &indf, status);
if (ibuf) ibuf = astFree( ibuf );
if (outvar) outvar = astFree( outvar );
if (dksquid) dksquid = astFree( dksquid );
if (state) state = astFree( state );
}
void smurf_jsatileinfo( int *status ) {
/* Local Variables */
AstCmpRegion *overlap;
AstFitsChan *fc;
AstFrameSet *fs;
AstObject *obj;
AstRegion *region;
AstRegion *target;
HDSLoc *cloc = NULL;
HDSLoc *xloc = NULL;
char *jcmt_tiles;
char *tilendf = NULL;
char text[ 200 ];
double dec[ 8 ];
double dist;
double dlbnd[ 2 ];
double dubnd[ 2 ];
double gx[ 8 ];
double gy[ 8 ];
double maxdist;
double norm_radec[2];
double point1[ 2 ];
double point2[ 2 ];
double ra[ 8 ];
double ra0;
double dec0;
int *ipntr;
int axes[ 2 ];
int create;
int dirlen;
int el;
int exists;
int flag;
int i;
int indf1;
int indf2;
int indf3;
int itile;
int iv;
int jtile;
int lbnd[ 2 ];
int local_origin;
int nc;
int place;
int tlbnd[ 2 ];
int tubnd[ 2 ];
int ubnd[ 2 ];
smf_jsaproj_t proj;
int xt;
int yt;
smfJSATiling skytiling;
void *pntr;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Start a new AST context. */
astBegin;
/* Get the instrument to use abnd get the parameters describing the
layout of its JSA tiles. */
smf_jsainstrument( "INSTRUMENT", NULL, SMF__INST_NONE, &skytiling,
status );
/* Return the maximum tile index. */
parPut0i( "MAXTILE", skytiling.ntiles - 1, status );
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Decide what sort of projection to use. */
parChoic( "PROJ", "HPX", "HPX,HPX12,XPHN,XPHS", 1, text, sizeof(text),
status );
proj = smf_jsaproj_fromstr( text, 1, status );
/* If required, create an all-sky NDF in which each pixel covers the area
of a single tile, and holds the integer tile index. The NDF has an
initial size of 1x1 pixels, but is expanded later to the required size. */
lbnd[ 0 ] = ubnd[ 0 ] = lbnd[ 1 ] = ubnd[ 1 ] = 1;
ndfCreat( "ALLSKY", "_INTEGER", 2, lbnd, ubnd, &indf3, status );
/* If a null (!) value was supplied for parameter ALLSKY, annull the
error and pass on. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, create a FrameSet describing the whole sky in which each
pixel corresponds to a single tile. */
} else {
smf_jsatile( -1, &skytiling, 0, proj, NULL, &fs, NULL, lbnd, ubnd,
status );
/* Change the bounds of the output NDF. */
ndfSbnd( 2, lbnd, ubnd, indf3, status );
/* Store the FrameSet in the NDF. */
ndfPtwcs( fs, indf3, status );
/* Map the data array. */
ndfMap( indf3, "Data", "_INTEGER", "WRITE/BAD", (void **) &ipntr, &el,
status );
/* Create all-sky map using XPH projection. */
if( *status == SAI__OK ) {
/* Loop round every tile index. */
for( jtile = 0; jtile < skytiling.ntiles; jtile++ ) {
/* Get the zero-based (x,y) indices of the tile within an HPX projection.
This flips the bottom left half-facet up to the top right. */
smf_jsatilei2xy( jtile, &skytiling, &xt, &yt, NULL, status );
/* Convert these HPX indices to the corresponding indices within the
required projection. Note, the lower left facet is split by the above
call to smf_jsatilei2xy tile (i.e. (xt,yt) indices are *not* in the
"raw" mode). For instance, (0,0) is not a valid tile. */
smf_jsatilexyconv( &skytiling, proj, xt, yt, 0, &xt, &yt, status );
/* Get the vector index of the corresponding element of the all-sky NDF. */
if( proj == SMF__JSA_HPX || proj == SMF__JSA_HPX12 ) {
iv = xt + 5*skytiling.ntpf*yt;
} else {
iv = xt + 4*skytiling.ntpf*yt;
}
/* Report an error if this element has already been assigned a tile
index. Otherwise, store the tile index. */
if( ipntr[ iv ] == VAL__BADI ) {
ipntr[ iv ] = jtile;
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "%s projection assigns multiple tiles to "
"pixel (%d,%d).", status, text, xt, yt );
break;
}
}
}
/* Store NDF title. */
sprintf( text, "JSA tile indices for %s data", skytiling.name );
ndfCput( text, indf3, "TITLE", status );
/* Store the instrument as a component in the SMURF extension. */
ndfXnew( indf3, "SMURF", "INSTRUMENT", 0, 0, &xloc, status );
ndfXpt0c( skytiling.name, indf3, "SMURF", "INSTRUMENT", status );
datAnnul( &xloc, status );
/* Close the NDF. */
ndfAnnul( &indf3, status );
}
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Get the zero-based index of the required tile. If a null value is
supplied, annull the error and skip to the end. */
parGdr0i( "ITILE", 0, 0, skytiling.ntiles - 1, 0, &itile, status );
if( *status == PAR__NULL ) {
errAnnul( status );
goto L999;
}
/* See if the pixel origin is to be at the centre of the tile. */
parGet0l( "LOCAL", &local_origin, status );
/* Display the tile number. */
msgBlank( status );
msgSeti( "ITILE", itile );
msgSeti( "MAXTILE", skytiling.ntiles - 1);
msgOut( " ", " Tile ^ITILE (from 0 to ^MAXTILE):", status );
/* Get the FITS header, FrameSet and Region defining the tile, and the tile
bounds in pixel indices. */
smf_jsatile( itile, &skytiling, local_origin, proj, &fc, &fs, ®ion,
lbnd, ubnd, status );
/* Write the FITS headers out to a file, annulling the error if the
header is not required. */
if( *status == SAI__OK ) {
atlDumpFits( "HEADER", fc, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* If required, write the Region out to a text file. */
if( *status == SAI__OK ) {
atlCreat( "REGION", (AstObject *) region, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Store the lower and upper pixel bounds of the tile. */
parPut1i( "LBND", 2, lbnd, status );
parPut1i( "UBND", 2, ubnd, status );
/* Display pixel bounds on the screen. */
msgSeti( "XL", lbnd[ 0 ] );
msgSeti( "XU", ubnd[ 0 ] );
msgSeti( "YL", lbnd[ 1 ] );
msgSeti( "YU", ubnd[ 1 ] );
msgOut( " ", " Pixel bounds: (^XL:^XU,^YL:^YU)", status );
/* Get the RA,Dec at the tile centre. */
if( astTest( fs, "SkyRef" ) ) {
ra0 = astGetD( fs, "SkyRef(1)" );
dec0 = astGetD( fs, "SkyRef(2)" );
/* Format the central RA and Dec. and display. Call astNorm on the
coordinates provided that the frame set has the correct number of
axes (which it should as it comes from smf_jsatile). */
norm_radec[0] = ra0;
norm_radec[1] = dec0;
if (astGetI(fs, "Naxes") == 2) astNorm(fs, norm_radec);
msgSetc( "RACEN", astFormat( fs, 1, norm_radec[ 0 ] ));
msgSetc( "DECCEN", astFormat( fs, 2, norm_radec[ 1 ] ));
msgOut( " ", " Centre (ICRS): RA=^RACEN DEC=^DECCEN", status );
/* Transform a collection of points on the edge of the region (corners and
side mid-points) from GRID coords to RA,Dec. */
point1[ 0 ] = 0.5;
point1[ 1 ] = 0.5;
point2[ 0 ] = ubnd[ 0 ] - lbnd[ 0 ] + 1;
point2[ 1 ] = ubnd[ 1 ] - lbnd[ 1 ] + 1;
gx[ 0 ] = point1[ 0 ]; /* Bottom left */
gy[ 0 ] = point1[ 1 ];
gx[ 1 ] = point1[ 0 ]; /* Centre left */
gy[ 1 ] = gy[ 0 ];
gx[ 2 ] = point1[ 0 ]; /* Top left */
gy[ 2 ] = point2[ 1 ];
gx[ 3 ] = gx[ 0 ]; /* Top centre */
gy[ 3 ] = point2[ 1 ];
gx[ 4 ] = point2[ 0 ]; /* Top right */
gy[ 4 ] = point2[ 1 ];
gx[ 5 ] = point2[ 0 ]; /* Centre right */
gy[ 5 ] = gy[ 0 ];
gx[ 6 ] = point2[ 0 ]; /* Bottom right */
gy[ 6 ] = point1[ 1 ];
gx[ 7 ] = gx[ 0 ]; /* Bottom centre */
gy[ 7 ] = point1[ 1 ];
astTran2( fs, 8, gx, gy, 1, ra, dec );
/* Find the arc-distance from the centre to the furthest point from the
centre. */
point1[ 0 ] = ra0;
point1[ 1 ] = dec0;
maxdist = -1.0;
for( i = 1; i < 8; i++ ) {
if( ra[ i ] != AST__BAD && dec[ i ] != AST__BAD ) {
point2[ 0 ] = ra[ i ];
point2[ 1 ] = dec[ i ];
dist = astDistance( fs, point1, point2 );
if( dist > maxdist ) maxdist = dist;
}
}
/* Convert from radius to diameter. */
maxdist *= 2.0;
/* Format this size as a dec value (i.e. arc-distance) and display it. */
if( maxdist > 0.0 ) {
msgSetc( "SIZE", astFormat( fs, 2, maxdist ) );
msgOut( " ", " Size: ^SIZE", status );
} else {
maxdist = AST__BAD;
msgOut( " ", " Size: <unknown>", status );
}
/* If a discontinuity passes through the tile, the centre and size may be
unknown. */
} else {
ra0 = AST__BAD;
dec0 = AST__BAD;
maxdist = AST__BAD;
msgOut( " ", " Centre (ICRS): RA=<unknown> DEC=<unknown>", status );
msgOut( " ", " Size: <unknown>", status );
}
/* Write the tile centre ra and dec in radians to the output parameters. */
parPut0d( "RACEN", norm_radec[ 0 ], status );
parPut0d( "DECCEN", norm_radec[ 1 ], status );
/* Write the size to the output parameter as radians. */
parPut0d( "SIZE", maxdist, status );
/* Get the translation of the environment variable JSA_TILE_DIR. */
jcmt_tiles = getenv( "JSA_TILE_DIR" );
/* Initialise the path to the tile's NDF to hold the root directory.
Use the current working directory if JSA_TILE_DIR is undefined. */
if( jcmt_tiles ) {
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
} else {
nc = 512;
jcmt_tiles = astMalloc( nc );
while( !getcwd( jcmt_tiles, nc ) ) {
nc *= 2;
jcmt_tiles = astRealloc( jcmt_tiles, nc );
}
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
jcmt_tiles = astFree( jcmt_tiles );
}
/* Complete the path to the tile's NDF. */
tilendf = astAppendString( tilendf, &nc, "/" );
tilendf = astAppendString( tilendf, &nc, skytiling.subdir );
dirlen = nc;
sprintf( text, "/tile_%d.sdf", itile );
tilendf = astAppendString( tilendf, &nc, text );
/* Write it to the output parameter. */
parPut0c( "TILENDF", tilendf, status );
/* See if the NDF exists, and store the flag in the output parameter. */
exists = access( tilendf, F_OK ) ? 0 : 1;
parPut0l( "EXISTS", exists, status );
/* If the NDF does not exist, create it if required. */
parGet0l( "CREATE", &create, status );
if( !exists && create && *status == SAI__OK ) {
/* Write the NDF info to the screen. */
msgSetc( "NDF", tilendf );
msgOutif( MSG__NORM, " ", " NDF: ^NDF (created)", status );
/* Temporarily terminate the NDF path at the end of the subdirectory. */
tilendf[ dirlen ] = 0;
/* Create the required directory (does nothing if the directory
already exists). It is given read/write/search permissions for owner
and group, and read/search permissions for others. */
(void) mkdir( tilendf, S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH );
/* Replace the character temporarily overwritten above. */
tilendf[ dirlen ] = '/';
/* Now create the tile's NDF. */
ndfPlace( NULL, tilendf, &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf1, status );
/* Fill its data array with zeros. */
ndfMap( indf1, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
/* Store the WCS FrameSet. */
ndfPtwcs( fs, indf1, status );
/* If the instrument jsatiles.have variance, fill the variance array with zeros. */
if( skytiling.var ) {
ndfMap( indf1, "Variance", skytiling.type, "WRITE/ZERO", &pntr,
&el, status );
}
/* Create a SMURF extension. */
ndfXnew( indf1, SMURF__EXTNAME, SMURF__EXTTYPE, 0, NULL, &xloc, status );
/* Store the tile number and instrument name in the extension. */
datNew0I( xloc, "TILE", status );
datFind( xloc, "TILE", &cloc, status );
datPut0I( cloc, itile, status );
datAnnul( &cloc, status );
datNew0C( xloc, "INSTRUMENT", strlen( skytiling.name ), status );
datFind( xloc, "INSTRUMENT", &cloc, status );
datPut0C( cloc, skytiling.name, status );
datAnnul( &cloc, status );
/* Create a weights NDF within the SMURF extension, and fill its data
array with zeros. */
ndfPlace( xloc, "WEIGHTS", &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf2, status );
ndfMap( indf2, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
ndfPtwcs( fs, indf2, status );
ndfAnnul( &indf2, status );
/* Annul the extension locator and the main NDF identifier. */
datAnnul( &xloc, status );
ndfAnnul( &indf1, status );
/* Write the NDF info to the screen. */
} else {
msgSetc( "NDF", tilendf );
msgSetc( "E", exists ? "exists" : "does not exist" );
msgOut( " ", " NDF: ^NDF (^E)", status );
}
/* Initialise TBND and TLBND to indicate no overlap. */
tlbnd[ 0 ] = 1;
tlbnd[ 1 ] = 1;
tubnd[ 0 ] = 0;
tubnd[ 1 ] = 0;
/* Attempt to to get an AST Region (assumed to be in some 2D sky coordinate
system) using parameter "TARGET". */
if( *status == SAI__OK ) {
kpg1Gtobj( "TARGET", "Region",
(void (*)( void )) F77_EXTERNAL_NAME(ast_isaregion),
&obj, status );
/* Annul the error if none was obtained. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, use the supplied object. */
} else {
target = (AstRegion *) obj;
/* If the target Region is 3-dimensional, remove the third axis, which
is assumed to be a spectral axis. */
if( astGetI( target, "Naxes" ) == 3 ) {
axes[ 0 ] = 1;
axes[ 1 ] = 2;
target = astPickAxes( target, 2, axes, NULL );
}
/* See if there is any overlap between the target and the tile. */
overlap = NULL;
flag = astOverlap( region, target );
if( flag == 0 ) {
msgOut( "", " Cannot convert between the coordinate system of the "
"supplied target and the tile.", status );
} else if( flag == 1 || flag == 6 ) {
msgOut( "", " There is no overlap between the target and the tile.",
status );
} else if( flag == 2 ) {
msgOut( "", " The tile is contained within the target.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( flag == 3 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 4 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 5 ) {
msgOut( "", " The target and tile are identical.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( *status == SAI__OK ) {
*status = SAI__OK;
errRepf( "", "Unexpected value %d returned by astOverlap "
"(programming error).", status, flag );
}
/* If a region containing the intersection of the tile and target was
created above, map it into the grid coordinate system of the tile. */
if( overlap ) {
overlap = astMapRegion( overlap, astGetMapping( fs, AST__CURRENT,
AST__BASE ),
astGetFrame( fs, AST__BASE ) );
/* Get its GRID bounds. */
astGetRegionBounds( overlap, dlbnd, dubnd );
/* Convert to integer. */
tlbnd[ 0 ] = ceil( dlbnd[ 0 ] - 0.5 );
tlbnd[ 1 ] = ceil( dlbnd[ 1 ] - 0.5 );
tubnd[ 0 ] = ceil( dubnd[ 0 ] - 0.5 );
tubnd[ 1 ] = ceil( dubnd[ 1 ] - 0.5 );
/* Convert to PIXEL indices within the tile. */
tlbnd[ 0 ] += lbnd[ 0 ] - 1;
tlbnd[ 1 ] += lbnd[ 1 ] - 1;
tubnd[ 0 ] += lbnd[ 0 ] - 1;
tubnd[ 1 ] += lbnd[ 1 ] - 1;
msgOutf( "", " The target overlaps section (%d:%d,%d:%d).",
status, tlbnd[ 0 ], tubnd[ 0 ], tlbnd[ 1 ], tubnd[ 1 ] );
}
}
}
/* Store the pixel index bounds of the tiles overlap with the target. */
parPut1i( "TLBND", 2, tlbnd, status );
parPut1i( "TUBND", 2, tubnd, status );
/* Arrive here if an error occurs. */
L999:;
/* Free resources. */
tilendf = astFree( tilendf );
/* End the AST context. */
astEnd;
/* Issue a status indication.*/
msgBlank( status );
if( *status == SAI__OK ) {
msgOutif( MSG__VERB, "", "JSATILEINFO succeeded.", status);
} else {
msgOutif( MSG__VERB, "", "JSATILEINFO failed.", status);
}
}
void smf_close_file( smfData ** data, int * status ) {
void *buf=NULL; /* Buffer pointer */
size_t buflen=0; /* Size of buffer */
smfDA * da; /* pointer to smfDA in smfData */
smfFts* fts; /* pointer to smfFts in smfData */
size_t datalen=0; /* Size of data buffer in bytes */
smfDream *dream = NULL; /* Pointer to smfDream in smfData */
smfFile * file; /* pointer to smfFile in smfData */
int freedata = 0; /* should the data arrays be freed? */
smfHead * hdr; /* pointer to smfHead in smfData */
size_t headlen=0; /* Size of header (mmap'd files) in bytes */
size_t i; /* loop counter */
smfDIMMHead *temphead=NULL; /* Pointer to DIMM header */
/* we need to be able to clean up even if input status is bad -
this requires some defensive programming. */
if ( *data == NULL ) {
if ( *status == SAI__OK ) {
/* Status is good so we have a problem */
*status = SAI__ERROR;
errRep( ERRFUNC, "Attempt to close file when smfData pointer is NULL (possible programming error)",
status );
}
/* null pointer so just return since there is nothing to free */
return;
}
/* Process reference count */
/* Only proceed if the decremented reference count is 0 */
(*data)->refcount--;
if ((*data)->refcount > 0 ) return;
/* Get the header and file, since we need them for checking */
hdr = (*data)->hdr;
/* Before annulling close NDF try closing SCU2RED.MAPCOORD */
smf_close_mapcoord( *data, status );
/* Display any warnings generated by AST and stored in the FitsChan. */
file = (*data)->file;
if( hdr && hdr->fitshdr ) {
fts1Astwn( hdr->fitshdr,
file ? file->ndfid : NDF__NOID,
status );
}
/* now file information */
if (file != NULL) {
if ( file->isSc2store ) {
/* Nothing to free here except for data */
freedata = 1;
} else if ( file->ndfid != NDF__NOID ) {
/* Handle quality as a special case */
if ( (*data)->qual) {
(*data)->qual = smf_qual_unmap( file->ndfid, (*data)->qfamily,
(*data)->qual, status );
}
/* Annul the NDF (which will unmap things) */
ndfAnnul( &(file->ndfid), status );
} else if( file->fd ) {
/* Array was mmap'd to a file, and must now be sync'd and unmapped,
and the file descriptor closed */
/* Get the size of the header and data section */
smf_calc_mmapsize( sizeof(*temphead), *data, &headlen, &datalen,
&buflen, status );
/* The header is in the same mapped array as the data array,
but headlen bytes earlier. Point temphead to this location and
update relevant header values before closing */
buf = ((char*)((*data)->pntr[0]) - headlen);
temphead = (smfDIMMHead *) buf;
temphead->data.isTordered = (*data)->isTordered;
temphead->data.dtype = (*data)->dtype;
temphead->data.ndims = (*data)->ndims;
memcpy( temphead->data.dims, (*data)->dims, sizeof( temphead->data.dims));
if( msync( buf, buflen, MS_ASYNC ) == -1 ) {
*status = SAI__ERROR;
errRep( ERRFUNC, "Unable to synch model container file", status );
} else if( munmap( buf, buflen ) == -1 ) {
*status = SAI__ERROR;
errRep( ERRFUNC, "Unable to unmap model container file", status );
} else if( close( file->fd ) == -1 ) {
*status = SAI__ERROR;
errRep( ERRFUNC, "Unable to close model container file", status );
} else {
file->fd = 0;
}
} else {
/* No file so free the data */
freedata = 1;
}
(*data)->file = astFree( (*data)->file );
} else {
/* no file - data is ours to free */
freedata = 1;
}
/* Tidy up the header */
if (hdr != NULL) {
if (hdr->wcs != NULL) hdr->wcs = astAnnul( hdr->wcs );
if (hdr->tswcs != NULL) hdr->tswcs = astAnnul( hdr->tswcs );
if (hdr->fitshdr != NULL) hdr->fitshdr = astAnnul( hdr->fitshdr );
if( hdr->cache1 ) hdr->cache1 = sc2ast_createwcs2( SC2AST__NULLSUB, NULL, 0.0, NULL, NULL, NULL,
hdr->cache1, status );
if( hdr->cache2 ) hdr->cache2 = smf_create_lutwcs( 1, NULL, NULL, 0, NULL, 0.0, NULL,
NULL, NULL, hdr->cache2, status );
if( hdr->cache3 ) hdr->cache3 = smf_detpos_wcs( NULL, -1, 0.0, NULL, NULL, hdr->cache3,
status );
if (!hdr->isCloned) {
/* We are responsible for this memory - although what happens
when we are cloned and the original is freed first? Need
to think carefully about memory management. */
if (hdr->allState != NULL) {
hdr->allState = astFree( hdr->allState );
}
if (hdr->fplanex) hdr->fplanex = astFree( hdr->fplanex );
if (hdr->fplaney) hdr->fplaney = astFree( hdr->fplaney );
if (hdr->detpos) hdr->detpos = astFree( hdr->detpos );
if (hdr->tsys) hdr->tsys = astFree( hdr->tsys );
if (hdr->detname) hdr->detname = astFree( hdr->detname );
if (hdr->ocsconfig) hdr->ocsconfig = astFree( hdr->ocsconfig );
}
hdr = astFree( hdr );
}
/* Now the smfDA itself */
if ( (*data)->da != NULL ) {
da = (*data)->da;
da->flatcal = astFree( da->flatcal );
da->flatpar = astFree( da->flatpar );
if( da->dksquid) smf_close_file( &da->dksquid, status );
da->heatval = astFree( da->heatval );
da = astFree( da );
}
/* Free smfFts */
if((*data)->fts != NULL) {
fts = (*data)->fts;
if(fts->zpd) { smf_close_file(&fts->zpd, status); }
if(fts->fpm) { smf_close_file(&fts->fpm, status); }
if(fts->sigma) { smf_close_file(&fts->sigma, status); }
fts = astFree(fts);
}
/* Free smfDream */
if ( (*data)->dream != NULL ) {
dream = (*data)->dream;
if ( dream->gridwts != NULL)
dream->gridwts = astFree( dream->gridwts );
if ( dream->invmatx != NULL)
dream->invmatx = astFree( dream->invmatx );
dream= astFree( dream );
}
/* Free up other pointers in the smfData: */
if ( (*data)->poly ) {
(*data)->poly = astFree( (*data)->poly );
}
if ( (*data)->lut ) {
(*data)->lut = astFree( (*data)->lut );
}
if( (*data)->theta ) {
(*data)->theta = astFree( (*data)->theta );
}
/* Free the data arrays if they are non-null (they should have been
freed if they were mapped to a file but not if they were stored
in a separate action as temp storage */
if (freedata) {
for (i = 0; i < 2; i++ ) {
if ( ((*data)->pntr)[i] != NULL )
((*data)->pntr)[i] = astFree( ((*data)->pntr)[i] );
}
if ( (*data)->qual ) {
(*data)->qual = astFree( (*data)->qual );
}
}
/* finally free smfData */
*data = astFree( *data );
}
void smf_getrefwcs( const char *param, Grp *igrp, AstFrameSet **specwcs,
AstFrameSet **spacewcs, int *isjsa, int *status ){
/* Local Variables */
AstFrame *frm = NULL;
AstFrameSet *refwcs = NULL; /* The WCS FrameSet from the reference NDF */
AstRegion *circle;
char text[ 255 ]; /* Parameter value */
int *tiles;
int i;
int jsatiles;
int lbnd[2]; /* Lower pixel index bounds of mid tile */
int ntile;
int perm[ 2 ];
int refndf; /* NDF identifier for the refence NDF */
int ubnd[2]; /* Upper pixel index bounds of mid tile */
size_t code;
smfData *data = NULL; /* Structure describing 1st input file */
smfJSATiling skytiling;
smf_inst_t inst = SMF__INST_NONE;
smf_jsaproj_t proj; /* Specific JSA projection to use */
smf_subinst_t subinst;
/* Initialise the returned values. */
*specwcs = NULL;
*spacewcs = NULL;
*isjsa = 0;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context. */
astBegin;
/* If the JSAILES parameter is TRUE, then we use the JSA all-sky pixel
grid regardless of the setting of REF. */
parGet0l( "JSATILES", &jsatiles, status );
if( jsatiles ) {
strcpy( text, "JSA" );
*isjsa = 1;
/* Otherwise, first get the parameter value as a string. Use subpar to avoid problem
caused by interpretion of the text within the parameter system. */
} else {
subParFindpar( param, &code, status );
subParGetname( code, text, sizeof(text), status );
}
/* If no value was supplied, annul the error and do nothing more. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* If it is "JSA", or one of the JSA projection codes, we return WCS that
describes one of the the JSA all-sky pixel grids. */
} else if( *status == SAI__OK ) {
proj = smf_jsaproj_fromstr( text, 0, status );
if( astChrMatch( text, "JSA" ) || proj != SMF__JSA_NULL ) {
*isjsa = 1;
/* Report an error if the instrument cannot be determined. */
if( !igrp ) {
*status = SAI__ERROR;
errRep( "", "smf_getrefwcs: Cannot use the JSA all-sky pixel "
"grid since no input group has been supplied (possibly "
"programming error).", status );
} else {
/* Open the first input file. */
smf_open_file( NULL, igrp, 1, "READ", SMF__NOCREATE_DATA, &data,
status );
if( *status == SAI__OK ) {
/* Get the instrument. */
if( data->hdr->instrument == INST__SCUBA2 ) {
subinst = smf_calc_subinst( data->hdr, status );
if( subinst == SMF__SUBINST_850 ) {
inst = SMF__INST_SCUBA_2_850;
} else {
inst = SMF__INST_SCUBA_2_450;
}
} else if( data->hdr->instrument == INST__ACSIS ) {
inst = SMF__INST_ACSIS;
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
if( data->file ) {
smf_smfFile_msg( data->file, "FILE", 1, "one or more of "
"the input data files" );
} else {
msgSetc( "FILE", "one or more of the input data files" );
}
errRep( "", "No tiles are yet defined for the instrument that "
"created ^FILE.", status );
}
/* Get the parameters that define the layout of sky tiles for the
instrument. */
smf_jsatiling( inst, &skytiling, status );
/* For "JSA" - choose the best projection. */
if( astChrMatch( text, "JSA" ) ) {
/* Use the FITS headers in the first raw data file to create an AST Circle
describing the approximate area of the observation within the tracking
system. */
circle = smf_mapregion_approx( igrp, status );
/* Convert the circle to ICRS (as used by the JSA all-sky grid). */
astSetC( circle, "System", "ICRS" );
/* Get a list of the tiles that touch this circle. */
tiles = smf_jsatiles_region( circle, &skytiling,
&ntile, status );
/* Choose the best projection (i.e. the projection that puts the circle
furthest away from any singularities). */
proj = smf_jsaproj( ntile, tiles, &skytiling, status);
/* Free resources. */
tiles = astFree( tiles );
circle = astAnnul( circle );
/* If a good projection was specified, use it. Otherwise report an error. */
} else if( proj == SMF__JSA_NULL && *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "Bad value '%s' supplied for parameter %s.",
status, text, param );
}
/* Report the projection type. */
msgOutf( " ", "The %s will be created on the JSA %s "
"pixel grid.", status,
(data->hdr->instrument==INST__ACSIS)?"cube":"map",
smf_jsaproj_tostr( proj ) );
/* All tiles within the same JSA projection use the same WCS, so we get
the WCS FrameSet for an arbitrary central tile, and use it for the
full map. The exception is that tiles within the HPX facet that is
split between bottom-left and top-right, use a different WCS (they
have different reference points). But our choice of projection should
mean that the map never falls in that facet. The base Frame will be
GRID coords within the tile, and the current Frame will be ICRS
(RA,Dec). */
smf_jsatile( ((skytiling.ntpf * skytiling.ntpf - 1) * 2) / 3,
&skytiling, 0, proj, NULL, spacewcs, NULL, lbnd,
ubnd, status );
/* Change the base Frame to be PIXEL. */
for( i = 1; i <= astGetI( *spacewcs, "NFrame" ); i++ ) {
frm = astGetFrame( *spacewcs, i );
if( astChrMatch( astGetC( frm, "Domain" ), "PIXEL" ) ) {
astSetI( *spacewcs, "Base", i );
}
frm = astAnnul( frm );
}
}
/* Close the current input data file. */
smf_close_file( NULL, &data, status);
}
/* Otherwise get the parameter value as an NDF. */
} else {
ndfAssoc( param, "READ", &refndf, status );
/* Get the WCS FrameSet from the reference NDF. */
ndfGtwcs( refndf, &refwcs, status );
/* Attempt to extract a new FrameSet from this WCS FrameSet, in which the
current Frame is a SkyFrame, and the base Frame is a 2D PIXEL Frame.
Since the NDF library sets the GRID Frame to be the Base Frame, we need
to make the PIXEL Frame the base Frame first. The NDF library ensures
that the pixel Frame is Frame 2. */
astSetI( refwcs, "Base", 2 );
*spacewcs = atlFrameSetSplit( refwcs, "SKY", NULL, NULL, status );
if( !(*spacewcs) ) {
if( *status == SAI__OK ) {
ndfMsg( "N", refndf );
*status = SAI__ERROR;
errRep( "", "The supplied reference NDF (^N) either has no "
"celestial WCS axes, or the celestial axes cannot "
"be separated from the non-celestial axes.", status );
}
/* The rest of makemap assumes that the sky frame axes are in the default
order (lon,lat). If this is not the case, permute them. */
} else if( astGetI( *spacewcs, "IsLatAxis(1)" ) ) {
perm[ 0 ] = 2;
perm[ 1 ] = 1;
astPermAxes( *spacewcs, perm );
}
/* Now look for the spectral WCS (described by a DSBSpecFrame). */
smf_getspectralwcs( refwcs, 1, specwcs, status );
/* We no longer need the NDF so annul it. */
ndfAnnul( &refndf, status );
}
}
/* If no error has occurred, export any returned FrameSet pointers from
the current AST context so that it will not be annulled when the AST
context is ended. Otherwise, ensure a null pointer is returned. */
if( *status == SAI__OK ) {
if( *spacewcs ) astExport( *spacewcs );
if( *specwcs ) astExport( *specwcs );
} else {
if( *spacewcs ) *spacewcs = astAnnul( *spacewcs );
if( *specwcs ) *specwcs = astAnnul( *specwcs );
}
/* End the AST context. This will annul all AST objects created within the
context (except for those that have been exported from the context). */
astEnd;
}
void smf_store_image( smfData *data, HDSLoc *scu2redloc, int cycle, int ndim,
int dims[], int nsampcycle, int vxmin, int vymin,
double *image, double *zero, int *status) {
smfHead *hdr = NULL; /* Pointer to header struct */
HDSLoc *bz_imloc = NULL; /* HDS locator */
int bzindf; /* NDF identifier for bolometer zero points */
double *bzptr = NULL; /* Pointer to mapped space for zero points */
int el; /* Number of elements mapped */
int frame; /* Mean timeslice index for image */
AstFitsChan *imfits=NULL; /* FITS header for each reconstructed image */
char imname[DAT__SZNAM]; /* Name of structure for image */
double *imptr = NULL; /* Pointer to mapped space for image */
int j; /* Loop counter */
int lbnd[2]; /* Lower dimension bounds */
int ntot; /* Total number of elements */
int place; /* NDF placeholder */
char prvname[2*PAR__SZNAM +1]; /* Provenance creator */
int seqend; /* End index */
int seqstart; /* Starting index */
int slice; /* Index of current time slice */
int strnum; /* Structure element number */
sc2ast_subarray_t subnum; /* Subarray index number */
int ubnd[2]; /* Upper dimension bounds */
int uindf; /* NDF identifier */
AstFrameSet *wcs = NULL; /* WCS info */
if ( *status != SAI__OK ) return;
seqstart = cycle * nsampcycle;
seqend = seqstart + nsampcycle - 1;
slice = (int)( (seqstart + seqend ) /2);
smf_tslice_ast( data, slice, 1, status);
astBegin;
/* Old beginning */
/* Get structure for nth constructed image */
strnum = cycle + 1;
sprintf ( imname, "I%d", strnum );
ntot = 1;
for ( j=0; j<ndim; j++ ) {
lbnd[j] = 1;
ubnd[j] = lbnd[j] + dims[j] - 1;
ntot *= dims[j];
}
ndfPlace ( scu2redloc, imname, &place, status );
ndfNew ( "_DOUBLE", ndim, lbnd, ubnd, &place, &uindf, status );
ndfHcre ( uindf, status );
/* Map the data array */
ndfMap ( uindf, "DATA", "_DOUBLE", "WRITE", (void *)&imptr, &el,
status );
/* Copy image array */
if ( *status == SAI__OK ) {
memcpy( imptr, image, ntot*sizeof(*imptr));
}
/* Derive WCS */
hdr = data->hdr;
smf_find_subarray(hdr, NULL, 0, &subnum, status );
sc2ast_createwcs( subnum, hdr->state, hdr->instap, hdr->telpos, &wcs, status );
/* Shift the coord frame is either vxmin or vymin is non-zero */
if ( vxmin != 0 || vymin != 0 ) {
sc2ast_moveframe ( -(double)vxmin, -(double)vymin, wcs, status );
}
/* This should probably be a user-option but ICRS is probably a safe
assumption */
sc2ast_set_output_system( hdr->state->tcs_tr_sys, wcs, status );
/* Sort out provenance. */
smf_get_taskname( NULL, prvname, status );
smf_updateprov( uindf, data, NDF__NOID, prvname, NULL, status );
/* Store world coordinate transformations */
ndfPtwcs ( wcs, uindf, status );
/* Store the bolometer zero points as an NDF in the extension */
if (zero) {
ndfXnew ( uindf, "BOLZERO", "SCUBA2_ZER_ARR", 0, 0, &bz_imloc,
status );
ndfPlace ( bz_imloc, "ZERO", &place, status );
/* Create the array for bolometer zeros */
lbnd[0] = SC2STORE__BOL_LBND;
ubnd[0] = lbnd[0] + dims[0] - 1;
lbnd[1] = SC2STORE__BOL_LBND;
ubnd[1] = lbnd[1] + dims[1] - 1;
ndfNew ( "_DOUBLE", 2, lbnd, ubnd, &place, &bzindf, status );
ndfHcre ( bzindf, status );
/* Map the data array */
ndfMap ( bzindf, "DATA", "_DOUBLE", "WRITE", (void *)&bzptr, &el,
status );
/* Copy image array */
if ( *status == SAI__OK ) {
memcpy( bzptr, zero, dims[0]*dims[1]*sizeof(*zero));
}
/* Unmap the data array */
ndfUnmap ( bzindf, "DATA", status );
ndfAnnul ( &bzindf, status );
/* Free the locators for the frame */
datAnnul ( &bz_imloc, status );
}
/* Store the FITS headers */
frame = (int)( (seqstart + seqend ) /2);
/* Quick and dirty method - just copy the full FITS header */
imfits = astCopy( hdr->fitshdr );
astSetFitsI( imfits, "SUBSCAN", strnum,
"Subscan number of reconstructed image", 0);
kpgPtfts( uindf, imfits, status );
/* Unmap the data array */
ndfUnmap ( uindf, "DATA", status );
ndfAnnul ( &uindf, status );
astEnd;
}
void smf_calc_iqu( ThrWorkForce *wf, smfData *data, int block_start,
int block_end, int ipolcrd, int qplace, int uplace,
int iplace, NdgProvenance *oprov, AstFitsChan *fc,
int pasign, double paoff, double angrot, int submean,
int *status ){
/* Local Variables: */
AstFrameSet *wcs; /* WCS FrameSet for output NDFs */
AstWinMap *wm; /* Mapping to reverse the X GRID axis */
const JCMTState *state; /* JCMTState info for current time slice */
dim_t nbolo; /* No. of bolometers */
dim_t ncol; /* No. of columns of bolometers */
dim_t nrow; /* No. of rows of bolometers */
dim_t ntslice; /* Number of time-slices in data */
double *ipi; /* Pointer to output I array */
double *ipq; /* Pointer to output Q array */
double *ipu; /* Pointer to output U array */
double ina[ 2 ]; /* Bolometer coords at bottom left */
double inb[ 2 ]; /* Bolometer coords at top right */
double outa[ 2 ]; /* NDF GRID coords at bottom left */
double outb[ 2 ]; /* NDF GRID coords at top right */
int bstep; /* Bolometer step between threads */
int el; /* Number of mapped array elements */
int indfi; /* Identifier for NDF holding I values */
int indfq; /* Identifier for NDF holding Q values */
int indfu; /* Identifier for NDF holding Q values */
int itime; /* Time slice index */
int iworker; /* Index of a worker thread */
int lbnd[ 2 ]; /* Lower pixel bounds of output NDF */
int ntime; /* Time slices to check */
int nworker; /* No. of worker threads */
int old; /* Data has old-style POL_ANG values? */
int ubnd[ 2 ]; /* Upper pixel bounds of output NDF */
size_t bstride; /* Stride between adjacent bolometer values */
size_t tstride; /* Stride between adjacent time slice values */
smfCalcIQUJobData *job_data = NULL; /* Pointer to all job data */
smfCalcIQUJobData *pdata = NULL;/* Pointer to next job data */
smfHead *hdr; /* Pointer to data header this time slice */
double *mean;
int tstep; /* Time slice step between threads */
/* Check the inherited status. */
if( *status != SAI__OK ) return;
/* Convenience pointers. */
hdr = data->hdr;
/* Obtain number of time slices - will also check for 3d-ness. Also get
the dimensions of the bolometer array and the strides between adjacent
bolometer values. */
smf_get_dims( data, &nrow, &ncol, &nbolo, &ntslice, NULL, &bstride,
&tstride, status );
/* Report an error if the block of time slices extends of either end. */
if( block_start < 0 || block_end >= (int) ntslice ) {
if( *status == SAI__OK ) {
*status = SAI__ERROR;
msgSeti( "S", block_start );
msgSeti( "E", block_end );
msgSeti( "N", ntslice );
errRep( " ", "smf_calc_iqu: invalid block of time slices - ^S to "
"^E (^N time slices are available).", status );
}
}
/* Create the output NDFs. Each one is a 2D array with dimensions
equal to the bolometer array. */
lbnd[ 0 ] = 1;
lbnd[ 1 ] = 1;
ubnd[ 0 ] = ncol;
ubnd[ 1 ] = nrow;
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &qplace, &indfq, status );
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &uplace, &indfu, status );
if( iplace != NDF__NOPL ) {
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &iplace, &indfi, status );
} else {
indfi = NDF__NOID;
}
/* Store any supplied provenance in all NDFs. */
if( oprov ) {
ndgWriteProv( oprov, indfq, 1, status );
ndgWriteProv( oprov, indfu, 1, status );
if( indfi != NDF__NOID ) ndgWriteProv( oprov, indfi, 1, status );
}
/* Store any supplied FITS headers in all NDFs.*/
if( fc && astGetI( fc, "NCard" ) > 0 ) {
kpgPtfts( indfq, fc, status );
kpgPtfts( indfu, fc, status );
if( indfi != NDF__NOID ) kpgPtfts( indfi, fc, status );
}
/* Store the WCS frameSet in all NDFs. First get the FrameSet for the
central time slice in the block, and set its current Frame to the
tracking frame. */
smf_tslice_ast( data, ( block_start + block_end )/2, 1, status);
astSetC( hdr->wcs, "System",
sc2ast_convert_system( (data->hdr->allState)[0].tcs_tr_sys,
status ) );
/* Take a copy and then reverse the X axis of the GRID Frame by remaping the
base Frame using a WinMap. This produces a pixel grid such as you would
see by looking up at the sky from underneath the array, rather than looking
down at the ground from above the array. */
wcs = astCopy( hdr->wcs );
ina[ 0 ] = 1.0;
inb[ 0 ] = ncol;
ina[ 1 ] = 1.0;
inb[ 1 ] = nrow;
outa[ 0 ] = ncol;
outb[ 0 ] = 1.0;
outa[ 1 ] = 1.0;
outb[ 1 ] = nrow;
wm = astWinMap( 2, ina, inb, outa, outb, " " );
astRemapFrame( wcs, AST__BASE, wm );
wm = astAnnul( wm );
/* Store the FrameSet in the output NDFs, then annull the copy. */
ndfPtwcs( wcs, indfq, status );
ndfPtwcs( wcs, indfu, status );
if( indfi != NDF__NOID ) ndfPtwcs( wcs, indfi, status );
wcs = astAnnul( wcs );
/* Map the Data array in each NDF. */
ndfMap( indfq, "Data", "_DOUBLE", "WRITE", (void **) &ipq, &el, status );
ndfMap( indfu, "Data", "_DOUBLE", "WRITE", (void **) &ipu, &el, status );
if( indfi != NDF__NOID ) {
ndfMap( indfi, "Data", "_DOUBLE", "WRITE", (void **) &ipi, &el, status );
} else {
ipi = NULL;
}
/* If required, allocate memory to hold the mean bolometer value at each
time slice. */
mean = submean ? astMalloc( ntslice*sizeof( *mean ) ) : NULL;
/* Create structures used to pass information to the worker threads. */
nworker = wf ? wf->nworker : 1;
job_data = astMalloc( nworker*sizeof( *job_data ) );
/* Check the above pointers can be used safely. */
if( *status == SAI__OK ) {
/* Go through the first thousand POL_ANG values to see if they are in
units of radians (new data) or arbitrary encoder units (old data).
They are assumed to be in radians if no POL_ANG value is larger than
20. */
old = 0;
state = hdr->allState;
ntime = ( ntslice > 1000 ) ? 1000 : ntslice;
for( itime = 0; itime < ntime; itime++,state++ ) {
if( state->pol_ang > 20 ) {
old = 1;
msgOutif( MSG__VERB, ""," POL2 data contains POL_ANG values "
"in encoder units - converting to radians.", status );
break;
}
}
/* If required, find the mean bolometer value at each time slice. */
if( submean ) {
/* Determine which time-slices are to be processed by which threads. */
tstep = ntslice/nworker;
if( tstep < 1 ) tstep = 1;
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->block_start = iworker*tstep;
if( iworker < nworker - 1 ) {
pdata->block_end = pdata->block_start + tstep - 1;
} else {
pdata->block_end = ntslice - 1;
}
}
/* Store all the other info needed by the worker threads, and submit the
jobs to calculate the Q and U values in each bolo, and then wait for
them to complete. */
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->bstride = bstride;
pdata->dat = data->pntr[0];
pdata->nbolo = nbolo;
pdata->qua = smf_select_qualpntr( data, NULL, status );;
pdata->tstride = tstride;
pdata->mean = mean;
pdata->action = 1;
/* Pass the job to the workforce for execution. */
thrAddJob( wf, THR__REPORT_JOB, pdata, smf1_calc_iqu_job, 0, NULL,
status );
}
/* Wait for the workforce to complete all jobs. */
thrWait( wf, status );
}
/* Determine which bolometers are to be processed by which threads. */
bstep = nbolo/nworker;
if( bstep < 1 ) bstep = 1;
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->b1 = iworker*bstep;
pdata->b2 = pdata->b1 + bstep - 1;
}
/* Ensure that the last thread picks up any left-over bolometers */
pdata->b2 = nbolo - 1;
/* Store all the other info needed by the worker threads, and submit the
jobs to calculate the Q and U values in each bolo, and then wait for
them to complete. */
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->bstride = bstride;
pdata->dat = data->pntr[0];;
pdata->nbolo = nbolo;
pdata->qua = smf_select_qualpntr( data, NULL, status );;
pdata->tstride = tstride;
pdata->allstates = hdr->allState;
pdata->ipq = ipq;
pdata->ipu = ipu;
pdata->ipi = ipi;
pdata->ipolcrd = ipolcrd;
pdata->block_start = block_start;
pdata->block_end = block_end;
pdata->old = old;
pdata->ncol = ncol;
pdata->pasign = pasign ? +1: -1;
pdata->paoff = paoff;
pdata->angrot = angrot;
pdata->action = 0;
pdata->mean = mean;
/* Pass the job to the workforce for execution. */
thrAddJob( wf, THR__REPORT_JOB, pdata, smf1_calc_iqu_job, 0, NULL,
status );
}
/* Wait for the workforce to complete all jobs. */
thrWait( wf, status );
}
/* Add POLANAL Frames to the WCS FrameSet in each output NDF. This Frame
is used by POLPACK to determine the reference direction of the Stokes
vectors (focal plane Y in this case, i.e. zero-based axis 1 ). */
smf_polext( indfq, 0, 0.0, "FPLANE", 1, status );
smf_polext( indfu, 0, 0.0, "FPLANE", 1, status );
if( ipi ) smf_polext( indfi, 0, 0.0, "FPLANE", 1, status );
/* Free the two output NDFs. */
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
if( ipi ) ndfAnnul( &indfi, status );
/* Free other resources. */
job_data = astFree( job_data );
mean = astFree( mean );
}
void smf_calc_iqu( ThrWorkForce *wf, smfData *data, int block_start,
int block_end, int ipolcrd, int qplace, int uplace,
int iplace, NdgProvenance *oprov, AstFitsChan *fc,
int pasign, double paoff, double angrot, int submean,
int harmonic, int *status ){
/* Local Variables: */
AstCmpMap *cm1;
AstCmpMap *cm2;
AstFrameSet *wcs; /* WCS FrameSet for output NDFs */
AstMapping *fpmap1;
AstMapping *fpmap2;
AstMapping *oskymap;
AstMapping *totmap;
AstSkyFrame *oskyfrm;
AstWinMap *wm; /* Mapping to reverse the X GRID axis */
const JCMTState *state; /* JCMTState info for current time slice */
const char *usesys; /* Used system string */
dim_t itime; /* Time slice index */
dim_t nbolo; /* No. of bolometers */
dim_t ncol; /* No. of columns of bolometers */
dim_t nrow; /* No. of rows of bolometers */
dim_t ntime; /* Time slices to check */
dim_t ntslice; /* Number of time-slices in data */
double *ipi; /* Pointer to output I array */
double *ipiv; /* Pointer to output I variance array */
double *ipq; /* Pointer to output Q array */
double *ipqv; /* Pointer to output Q variance array */
double *ipu; /* Pointer to output U array */
double *ipuv; /* Pointer to output U variance array */
double *mean;
double ang_data[2];
double fox[2];
double foy[2];
double fpr0;
double fprinc;
double fx[2];
double fy[2];
double ina[ 2 ]; /* Bolometer coords at bottom left */
double inb[ 2 ]; /* Bolometer coords at top right */
double outa[ 2 ]; /* NDF GRID coords at bottom left */
double outb[ 2 ]; /* NDF GRID coords at top right */
int bstep; /* Bolometer step between threads */
int el; /* Number of mapped array elements */
int gotvar; /* Were any output variances created? */
int indfi; /* Identifier for NDF holding I values */
int indfq; /* Identifier for NDF holding Q values */
int indfu; /* Identifier for NDF holding Q values */
int iworker; /* Index of a worker thread */
int lbnd[ 2 ]; /* Lower pixel bounds of output NDF */
int moving;
int nworker; /* No. of worker threads */
int old; /* Data has old-style POL_ANG values? */
int tstep; /* Time slice step between threads */
int ubnd[ 2 ]; /* Upper pixel bounds of output NDF */
size_t bstride; /* Stride between adjacent bolometer values */
size_t tstride; /* Stride between adjacent time slice values */
smfCalcIQUJobData *job_data = NULL; /* Pointer to all job data */
smfCalcIQUJobData *pdata = NULL;/* Pointer to next job data */
smfHead *hdr; /* Pointer to data header this time slice */
/* Check the inherited status. */
if( *status != SAI__OK ) return;
/* Convenience pointers. */
hdr = data->hdr;
/* Obtain number of time slices - will also check for 3d-ness. Also get
the dimensions of the bolometer array and the strides between adjacent
bolometer values. */
smf_get_dims( data, &nrow, &ncol, &nbolo, &ntslice, NULL, &bstride,
&tstride, status );
/* Report an error if the block of time slices extends of either end. */
if( block_start < 0 || block_end >= (int) ntslice ) {
if( *status == SAI__OK ) {
*status = SAI__ERROR;
msgSeti( "S", block_start );
msgSeti( "E", block_end );
msgSeti( "N", ntslice );
errRep( " ", "smf_calc_iqu: invalid block of time slices - ^S to "
"^E (^N time slices are available).", status );
}
}
/* Create the output NDFs. Each one is a 2D array with dimensions
equal to the bolometer array. */
lbnd[ 0 ] = 1;
lbnd[ 1 ] = 1;
ubnd[ 0 ] = ncol;
ubnd[ 1 ] = nrow;
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &qplace, &indfq, status );
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &uplace, &indfu, status );
if( iplace != NDF__NOPL ) {
ndfNew( "_DOUBLE", 2, lbnd, ubnd, &iplace, &indfi, status );
} else {
indfi = NDF__NOID;
}
/* Store any supplied provenance in all NDFs. */
if( oprov ) {
ndgWriteProv( oprov, indfq, 1, status );
ndgWriteProv( oprov, indfu, 1, status );
if( indfi != NDF__NOID ) ndgWriteProv( oprov, indfi, 1, status );
}
/* Store any supplied FITS headers in all NDFs.*/
if( fc && astGetI( fc, "NCard" ) > 0 ) {
kpgPtfts( indfq, fc, status );
kpgPtfts( indfu, fc, status );
if( indfi != NDF__NOID ) kpgPtfts( indfi, fc, status );
}
/* Store the WCS frameSet in all NDFs. First get the FrameSet for the
central time slice in the block, and set its current Frame to the
tracking frame. */
smf_tslice_ast( data, ( block_start + block_end )/2, 1, NO_FTS, status);
usesys = sc2ast_convert_system( (data->hdr->allState)[0].tcs_tr_sys,
status );
astSetC( hdr->wcs, "System", usesys );
/* Get the Mapping from focal plane coords to bolometer grid coords. This
is the same for all time slices. sc2ast ensures that frame 3 is FPLANE. */
fpmap1 = astGetMapping( hdr->wcs, 3, AST__BASE );
/* Take a copy and then reverse the X axis of the GRID Frame by remaping the
base Frame using a WinMap. This produces a pixel grid such as you would
see by looking up at the sky from underneath the array, rather than looking
down at the ground from above the array. */
wcs = astCopy( hdr->wcs );
ina[ 0 ] = 1.0;
inb[ 0 ] = ncol;
ina[ 1 ] = 1.0;
inb[ 1 ] = nrow;
outa[ 0 ] = ncol;
outb[ 0 ] = 1.0;
outa[ 1 ] = 1.0;
outb[ 1 ] = nrow;
wm = astWinMap( 2, ina, inb, outa, outb, " " );
astRemapFrame( wcs, AST__BASE, wm );
wm = astAnnul( wm );
/* Get the Mapping from output grid coords to focal plane coords. */
fpmap2 = astGetMapping( wcs, AST__BASE, 3 );
/* If the target is moving (assumed to be the case if the tracking
system is AZEL or GAPPT), make the FrameSet current Frame represent
offsets from the reference position (i.e. the moving target), and
indicate that the offset coord system should be used for alignment. */
if( !strcmp( usesys, "AZEL" ) || !strcmp( usesys, "GAPPT" ) ){
astSet( wcs, "SkyRefIs=Origin,AlignOffset=1" );
moving = 1;
} else {
moving = 0;
}
/* Store the FrameSet in the output NDFs. */
ndfPtwcs( wcs, indfq, status );
ndfPtwcs( wcs, indfu, status );
if( indfi != NDF__NOID ) ndfPtwcs( wcs, indfi, status );
/* Map the Data array in each NDF. */
ndfMap( indfq, "Data", "_DOUBLE", "WRITE", (void **) &ipq, &el, status );
ndfMap( indfu, "Data", "_DOUBLE", "WRITE", (void **) &ipu, &el, status );
if( indfi != NDF__NOID ) {
ndfMap( indfi, "Data", "_DOUBLE", "WRITE", (void **) &ipi, &el, status );
} else {
ipi = NULL;
}
/* Map the Variance array in each NDF. */
ndfMap( indfq, "Variance", "_DOUBLE", "WRITE", (void **) &ipqv, &el, status );
ndfMap( indfu, "Variance", "_DOUBLE", "WRITE", (void **) &ipuv, &el, status );
if( indfi != NDF__NOID ) {
ndfMap( indfi, "Variance", "_DOUBLE", "WRITE", (void **) &ipiv, &el, status );
} else {
ipiv = NULL;
}
/* If required, allocate memory to hold the mean bolometer value at each
time slice. */
mean = submean ? astMalloc( ntslice*sizeof( *mean ) ) : NULL;
/* Create structures used to pass information to the worker threads. */
nworker = wf ? wf->nworker : 1;
job_data = astMalloc( nworker*sizeof( *job_data ) );
/* Check the above pointers can be used safely. */
if( *status == SAI__OK ) {
/* Go through the first thousand POL_ANG values to see if they are in
units of radians (new data) or arbitrary encoder units (old data).
They are assumed to be in radians if no POL_ANG value is larger than
20. */
old = 0;
state = hdr->allState;
ntime = ( ntslice > 1000 ) ? 1000 : ntslice;
for( itime = 0; itime < ntime; itime++,state++ ) {
if( state->pol_ang > 20 ) {
old = 1;
msgOutif( MSG__VERB, ""," POL2 data contains POL_ANG values "
"in encoder units - converting to radians.", status );
break;
}
}
/* If required, find the mean bolometer value at each time slice. */
if( submean ) {
/* Determine which time-slices are to be processed by which threads. */
tstep = ntslice/nworker;
if( tstep < 1 ) tstep = 1;
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->block_start = iworker*tstep;
if( iworker < nworker - 1 ) {
pdata->block_end = pdata->block_start + tstep - 1;
} else {
pdata->block_end = ntslice - 1;
}
}
/* Store all the other info needed by the worker threads, and submit the
jobs to calculate the Q and U values in each bolo, and then wait for
them to complete. */
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->bstride = bstride;
pdata->dat = data->pntr[0];
pdata->nbolo = nbolo;
pdata->qua = smf_select_qualpntr( data, NULL, status );;
pdata->tstride = tstride;
pdata->mean = mean;
pdata->action = 1;
/* Pass the job to the workforce for execution. */
thrAddJob( wf, THR__REPORT_JOB, pdata, smf1_calc_iqu_job, 0, NULL,
status );
}
/* Wait for the workforce to complete all jobs. */
thrWait( wf, status );
}
/* Get the Frame representing absolute sky coords in the output NDF,
and the Mapping from sky to grid in the output NDF. */
oskyfrm = astCopy( astGetFrame( wcs, AST__CURRENT ) );
astSet( oskyfrm, "SkyRefIs=Ignored" );
oskymap = astGetMapping( wcs, AST__CURRENT, AST__BASE );
wcs = astAnnul( wcs );
/* Find the first and last time slices, calculate the angle between the
focal pane Y axis at the time slice, and the focal plane Y axis in
the output NDF. For intervening time-slices, the angle is found by
linear interpolation between the extreme time slices. */
for( el = 0; el < 2; el++ ) {
/* Get the mapping from GRID coords in the input time slice to GRID
coords in the output. */
totmap = smf_rebin_totmap( data, el?ntslice-1:0, oskyfrm, oskymap,
moving, NO_FTS, status );
/* Modify it to be the Mapping from focal plane coords in the input time
slice to focal plane coords in the output. */
cm1 = astCmpMap( fpmap1, totmap, 1, " " );
cm2 = astCmpMap( cm1, fpmap2, 1, " " );
/* Use this Mapping to convert two points on the focal plane Y axis from
the input to the output. */
fx[0] = 0.0;
fy[0] = 0.0;
fx[1] = 0.0;
fy[1] = 4.0;
astTran2( cm2, 2, fx, fy, 1, fox, foy );
/* The angle from the focal plane Y axis in the output to the focal plane
Y axis in the input time slice, measured positive in sense of rotation
from Fy to Fx. */
ang_data[ el ] = atan2( fox[1]-fox[0], foy[1]-foy[0] );
/* Free resources for this time slice. */
totmap = astAnnul( totmap );
cm1 = astAnnul( cm1 );
cm2 = astAnnul( cm2 );
}
/* Annul objects. */
oskymap = astAnnul( oskymap );
oskyfrm = astAnnul( oskyfrm );
fpmap1 = astAnnul( fpmap1 );
fpmap2 = astAnnul( fpmap2 );
/* Get the constants of the linear relationship between focal plane
rotation and time slice index "fpr = fpr0 + itime*fprinc". */
fpr0 = ang_data[ 0 ];
fprinc = ( ang_data[ 1 ] - fpr0 )/( ntslice - 1 );
/* Determine which bolometers are to be processed by which threads. */
bstep = nbolo/nworker;
if( bstep < 1 ) bstep = 1;
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->b1 = iworker*bstep;
pdata->b2 = pdata->b1 + bstep - 1;
}
/* Ensure that the last thread picks up any left-over bolometers */
pdata->b2 = nbolo - 1;
/* Store all the other info needed by the worker threads, and submit the
jobs to calculate the Q and U values in each bolo, and then wait for
them to complete. */
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
pdata->bstride = bstride;
pdata->dat = data->pntr[0];;
pdata->nbolo = nbolo;
pdata->qua = smf_select_qualpntr( data, NULL, status );;
pdata->tstride = tstride;
pdata->allstates = hdr->allState;
pdata->ipq = ipq;
pdata->ipu = ipu;
pdata->ipi = ipi;
pdata->ipqv = ipqv;
pdata->ipuv = ipuv;
pdata->ipiv = ipiv;
pdata->ipolcrd = ipolcrd;
pdata->block_start = block_start;
pdata->block_end = block_end;
pdata->old = old;
pdata->ncol = ncol;
pdata->pasign = pasign ? +1: -1;
pdata->paoff = paoff;
pdata->angrot = angrot;
pdata->fpr0 = fpr0;
pdata->fprinc = fprinc;
pdata->angfac = harmonic/4.0;
pdata->action = 0;
pdata->mean = mean;
/* Pass the job to the workforce for execution. */
thrAddJob( wf, THR__REPORT_JOB, pdata, smf1_calc_iqu_job, 0, NULL,
status );
}
/* Wait for the workforce to complete all jobs. */
thrWait( wf, status );
/* See if any thread produced non-bad variance values. */
gotvar = 0;
for( iworker = 0; iworker < nworker; iworker++ ) {
pdata = job_data + iworker;
if( pdata->gotvar ) gotvar = 1;
}
/* If no variances were created, erase the Variance component and tell
the user. */
ndfUnmap( indfq, "*", status );
ndfUnmap( indfu, "*", status );
if( ipi ) ndfUnmap( indfi, "*", status );
if( !gotvar ) {
ndfReset( indfq, "Variance", status );
ndfReset( indfu, "Variance", status );
if( ipi ) ndfReset( indfi, "Variance", status );
msgOut( "", "Warning: Insufficient input data to produce variances",
status );
}
}
/* Add POLANAL Frames to the WCS FrameSet in each output NDF. This Frame
is used by POLPACK to determine the reference direction of the Stokes
vectors (focal plane Y in this case, i.e. zero-based axis 1 ). */
smf_polext( indfq, 0, 0.0, "FPLANE", 1, status );
smf_polext( indfu, 0, 0.0, "FPLANE", 1, status );
if( ipi ) smf_polext( indfi, 0, 0.0, "FPLANE", 1, status );
/* Free the two output NDFs. */
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
if( ipi ) ndfAnnul( &indfi, status );
/* Free other resources. */
job_data = astFree( job_data );
mean = astFree( mean );
}
void smurf_unmakemap( int *status ) {
/* Local Variables */
AstFrameSet *wcsin = NULL; /* WCS Frameset for input cube */
AstMapping *skymap; /* GRID->SkyFrame Mapping from input WCS */
AstSkyFrame *abskyfrm; /* Input SkyFrame (always absolute) */
AstSkyFrame *skyfrm = NULL;/* SkyFrame from the input WCS Frameset */
Grp *igrp1 = NULL; /* Group of input sky files */
Grp *igrp2 = NULL; /* Group of input template files */
Grp *igrpq = NULL; /* Group of input Q sky files */
Grp *igrpu = NULL; /* Group of input U sky files */
Grp *ogrp = NULL; /* Group containing output file */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
char pabuf[ 10 ]; /* Text buffer for parameter value */
dim_t iel; /* Index of next element */
dim_t ndata; /* Number of elements in array */
dim_t ntslice; /* Number of time slices in array */
double *ang_data = NULL; /* Pointer to the FP orientation angles */
double *in_data = NULL; /* Pointer to the input I sky map */
double *inq_data = NULL; /* Pointer to the input Q sky map */
double *inu_data = NULL; /* Pointer to the input U sky map */
double *outq_data = NULL; /* Pointer to the Q time series data */
double *outu_data = NULL; /* Pointer to the U time series data */
double *pd; /* Pointer to next element */
double *pq = NULL; /* Pointer to next Q time series value */
double *pu = NULL; /* Pointer to next U time series value */
double angrot; /* Angle from focal plane X axis to fixed analyser */
double paoff; /* WPLATE value corresponding to POL_ANG=0.0 */
double params[ 4 ]; /* astResample parameters */
double sigma; /* Standard deviation of noise to add to output */
int alignsys; /* Align data in the map's system? */
int flag; /* Was the group expression flagged? */
int harmonic; /* The requested harmonic */
int ifile; /* Input file index */
int indf; /* Input sky map NDF identifier */
int indfin; /* Input template cube NDF identifier */
int indfout; /* Output cube NDF identifier */
int indfq; /* Input Q map NDF identifier */
int indfu; /* Input U map NDF identifier */
int interp = 0; /* Pixel interpolation method */
int moving; /* Is the telescope base position changing? */
int nel; /* Number of elements in array */
int nelqu; /* Number of elements in Q or U array */
int ngood; /* No. of good values in putput cube */
int nparam = 0; /* No. of parameters required for interpolation scheme */
int pasign; /* Indicates sense of POL_ANG value */
int sdim[ 2 ]; /* Array of significant pixel axes */
int slbnd[ 2 ]; /* Array of lower bounds of input map */
int subnd[ 2 ]; /* Array of upper bounds of input map */
size_t nskymap; /* Number of supplied sky cubes */
size_t outsize; /* Number of files in output group */
size_t size; /* Number of files in input group */
smfData *odata = NULL; /* Pointer to output data struct */
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Get an identifier for the input NDF. We use NDG (via kpg1Rgndf)
instead of calling ndfAssoc directly since NDF/HDS has problems with
file names containing spaces, which NDG does not have. */
kpg1Rgndf( "IN", 1, 1, "", &igrp1, &nskymap, status );
ndgNdfas( igrp1, 1, "READ", &indf, status );
/* Map the data array in the input sky map. */
ndfMap( indf, "DATA", "_DOUBLE", "READ", (void **) &in_data, &nel,
status );
/* Get the WCS FrameSet from the sky map, together with its pixel index
bounds. */
kpg1Asget( indf, 2, 0, 1, 1, sdim, slbnd, subnd, &wcsin, status );
/* Check the current Frame is a SKY frame. */
skyfrm = astGetFrame( wcsin, AST__CURRENT );
if( !astIsASkyFrame( skyfrm ) && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( " ", " Current Frame in ^N is not a SKY Frame.", status );
}
/* Get a copy of the current frame that represents absolute coords rather
than offsets. We assume the target is moving if the map represents
offsets. */
moving = ( *status == SAI__OK &&
!strcmp( astGetC( skyfrm, "SkyRefIs" ), "Origin" ) ) ? 1 : 0;
abskyfrm = astCopy( skyfrm );
astClear( abskyfrm, "SkyRefIs" );
/* If the ALIGNSYS parameter is TRUE then we align the raw data with the
map in the current system of the map, rather than the default ICRS. */
parGet0l( "ALIGNSYS", &alignsys, status );
if( alignsys ) astSetC( abskyfrm, "AlignSystem", astGetC( abskyfrm,
"System" ) );
/* Get the Mapping from the Sky Frame to grid axis in the iput map. */
skymap = astGetMapping( wcsin, AST__CURRENT, AST__BASE );
/* Get the pixel interpolation scheme to use. */
parChoic( "INTERP", "NEAREST", "NEAREST,LINEAR,SINC,"
"SINCSINC,SINCCOS,SINCGAUSS,SOMB,SOMBCOS",
1, pabuf, 10, status );
if( !strcmp( pabuf, "NEAREST" ) ) {
interp = AST__NEAREST;
nparam = 0;
} else if( !strcmp( pabuf, "LINEAR" ) ) {
interp = AST__LINEAR;
nparam = 0;
} else if( !strcmp( pabuf, "SINC" ) ) {
interp = AST__SINC;
nparam = 1;
} else if( !strcmp( pabuf, "SINCSINC" ) ) {
interp = AST__SINCSINC;
nparam = 2;
} else if( !strcmp( pabuf, "SINCCOS" ) ) {
interp = AST__SINCCOS;
nparam = 2;
} else if( !strcmp( pabuf, "SINCGAUSS" ) ) {
interp = AST__SINCGAUSS;
nparam = 2;
} else if( !strcmp( pabuf, "SOMB" ) ) {
interp = AST__SOMB;
nparam = 1;
} else if( !strcmp( pabuf, "SOMBCOS" ) ) {
interp = AST__SOMBCOS;
nparam = 2;
} else if( *status == SAI__OK ) {
nparam = 0;
*status = SAI__ERROR;
msgSetc( "V", pabuf );
errRep( "", "Support not available for INTERP = ^V (programming "
"error)", status );
}
/* Get an additional parameter vector if required. */
if( nparam > 0 ) parExacd( "PARAMS", nparam, params, status );
/* Get a group of reference time series files to use as templates for
the output time series files.*/
ndgAssoc( "REF", 1, &igrp2, &size, &flag, status );
/* Get output file(s) */
kpg1Wgndf( "OUT", igrp2, size, size, "More output files required...",
&ogrp, &outsize, status );
/* Get he noise level to add to the output data. */
parGet0d( "SIGMA", &sigma, status );
/* Get any Q and U input maps. */
if( *status == SAI__OK ) {
kpg1Rgndf( "QIN", 1, 1, "", &igrpq, &nskymap, status );
ndgNdfas( igrpq, 1, "READ", &indfq, status );
ndfMap( indfq, "DATA", "_DOUBLE", "READ", (void **) &inq_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "Q", indfq );
*status = SAI__ERROR;
errRep( "", "Q image '^Q' is not the same size as the I image.",
status );
}
kpg1Rgndf( "UIN", 1, 1, "", &igrpu, &nskymap, status );
ndgNdfas( igrpu, 1, "READ", &indfu, status );
ndfMap( indfu, "DATA", "_DOUBLE", "READ", (void **) &inu_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "U", indfu );
*status = SAI__ERROR;
errRep( "", "U image '^U' is not the same size as the I image.",
status );
}
if( *status == PAR__NULL ) {
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
inq_data = NULL;
inu_data = NULL;
errAnnul( status );
} else {
parGet0d( "ANGROT", &angrot, status );
parGet0d( "PAOFF", &paoff, status );
parGet0l( "PASIGN", &pasign, status );
}
}
/* Loop round all the template time series files. */
for( ifile = 1; ifile <= (int) size && *status == SAI__OK; ifile++ ) {
/* Start a new NDF context. */
ndfBegin();
/* Create the output NDF by propagating everything from the input, except
for quality and variance. */
ndgNdfas( igrp2, ifile, "READ", &indfin, status );
ndfMsg( "FILE", indfin );
msgSeti( "THISFILE", ifile );
msgSeti( "NUMFILES", size );
msgOutif( MSG__NORM, " ", "Simulating ^THISFILE/^NUMFILES ^FILE",
status );
ndgNdfpr( indfin, "DATA,HISTORY,LABEL,TITLE,WCS,UNITS,EXTENSION(*)",
ogrp, ifile, &indfout, status );
ndfAnnul( &indfin, status );
ndfAnnul( &indfout, status );
/* We now re-open the output NDF and then modify its data values. */
smf_open_file( wf, ogrp, ifile, "UPDATE", 0, &odata, status );
/* Issue a suitable message and abort if anything went wrong. */
if( *status != SAI__OK ) {
errRep( FUNC_NAME, "Could not open input template file.", status );
break;
} else {
if( odata->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( odata->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
}
}
/* Check the reference time series contains double precision values. */
smf_dtype_check_fatal( odata, NULL, SMF__DOUBLE, status );
/* Get the total number of data elements, and the number of time slices. */
smf_get_dims( odata, NULL, NULL, NULL, &ntslice, &ndata, NULL,
NULL, status );
/* Fill the output with bad values. */
if( *status == SAI__OK ) {
pd = odata->pntr[ 0 ];
for( iel = 0; iel < ndata; iel++ ) *(pd++) = VAL__BADD;
}
/* Resample the sky map data into the output time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, in_data, odata->pntr[ 0 ],
NULL, &ngood, status );
/* Issue a wrning if there is no good data in the output cube. */
if( ngood == 0 ) msgOutif( MSG__NORM, " ", " Output contains no "
"good data values.", status );
/* If Q and U maps have been given, allocate room to hold resampled Q and
U values, and fill them with bad values. */
if( inq_data && inu_data ) {
pq = outq_data = astMalloc( ndata*sizeof( *outq_data ) );
pu = outu_data = astMalloc( ndata*sizeof( *outu_data ) );
if( *status == SAI__OK ) {
for( iel = 0; iel < ndata; iel++ ) {
*(pu++) = VAL__BADD;
*(pq++) = VAL__BADD;
}
}
/* Determine the harmonic to use. */
parGet0i( "HARMONIC", &harmonic, status );
/* Allocate room for an array to hold the anti-clockwise angle from the
focal plane Y axis to the Y pixel axis in the reference map, at each
time slice. */
ang_data = astMalloc( ntslice*sizeof( *ang_data ) );
/* Resample them both into 3D time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inq_data, outq_data,
ang_data, &ngood, status );
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inu_data, outu_data,
NULL, &ngood, status );
/* Combine these time series with the main output time series so that the
main output is analysed intensity. */
smf_uncalc_iqu( wf, odata, odata->pntr[ 0 ], outq_data, outu_data,
ang_data, pasign, AST__DD2R*paoff, AST__DD2R*angrot,
harmonic, status );
/* Release work space. */
outq_data = astFree( outq_data );
outu_data = astFree( outu_data );
ang_data = astFree( ang_data );
}
/* Close the output time series file. */
smf_close_file( wf, &odata, status );
/* End the NDF context. */
ndfEnd( status );
}
/* Close any input data file that is still open due to an early exit from
the above loop. */
if( odata != NULL ) {
smf_close_file( wf, &odata, status );
odata = NULL;
}
/* Free remaining resources. */
if( igrp1 != NULL) grpDelet( &igrp1, status);
if( igrp2 != NULL) grpDelet( &igrp2, status);
if( igrpq != NULL) grpDelet( &igrpq, status);
if( igrpu != NULL) grpDelet( &igrpu, status);
if( ogrp != NULL) grpDelet( &ogrp, status);
/* End the NDF context. */
ndfEnd( status );
/* End the tile's AST context. */
astEnd;
/* Issue a status indication.*/
if( *status == SAI__OK ) {
msgOutif(MSG__VERB," ",TASK_NAME " succeeded, time series written.", status);
} else {
msgOutif(MSG__VERB," ",TASK_NAME " failed.", status);
}
}
void smf_export_noi( smfData *noi, const char *name, int boxsize, int *status ){
/* Local Variables */
HDSLoc *xloc = NULL;
dim_t ntslice;
dim_t nrows;
dim_t ncols;
dim_t nbolo;
double *ip;
double *dataptr;
double *dp;
double *pd;
int el;
int ibolo;
int indf;
int itime;
int lbnd[ 3 ];
int nz;
int place;
int ubnd[ 3 ];
size_t bstride;
size_t tstride;
int iz;
/* Check inherited status. */
if( *status != SAI__OK ) return;
/* Report an error if the number of time slices that share a single NOI
value is not known. */
if( boxsize == 0 ) {
*status = SAI__ERROR;
errRep( "", "smf_export_noi: noise boxsize is not yet known "
"(programming error).", status );
return;
}
/* Get the dimensions of the NOI model. */
smf_get_dims( noi, &nrows, &ncols, &nbolo, &ntslice, NULL, &bstride,
&tstride, status );
/* Determine the number of boxes to use. This is the length of 3rd axis.
of the new NDF. */
if( ntslice == 1 ) {
nz = 1;
} else {
nz = ntslice / boxsize;
}
if( nz <= 0 && *status == SAI__OK ){
*status = SAI__ERROR;
errRepf("", "smf_export_noi: boxsize (%d) and ntslice (%d) are "
"inconsistent (programming error).", status, boxsize,
(int) ntslice );
}
/* Get a pointer to the NOI data values. */
dataptr = noi->pntr[ 0 ];
/* Create the NDF. Use the axis ordering needed by smf_model_create. This
avoid re-ordering the values every time it is read in. */
ndfPlace( NULL, name, &place, status );
lbnd[ 0 ] = 1;
lbnd[ 1 ] = 1;
lbnd[ 2 ] = 1;
ubnd[ 0 ] = nz;
ubnd[ 1 ] = ncols;
ubnd[ 2 ] = nrows;
ndfNew( "_DOUBLE", 3, lbnd, ubnd, &place, &indf, status );
/* Map the Data array of the NDF and copy the NOI values into it. */
ndfMap( indf, "DATA", "_DOUBLE", "WRITE", (void **) &ip, &el, status );
if( *status == SAI__OK ) {
/* Initialise the time slice at the middle of the current box in the model. */
itime = ( nz == 1 ) ? 0 : boxsize/2;
/* We step sequentially through teh NDF pixels. Initialise a pointer to
the first pixel value. */
pd = ip;
/* Loop round each bolometer. */
for( ibolo = 0; ibolo < (int) nbolo; ibolo++ ) {
/* Get a pointer to the noise value for the current bolometer at the
centre of the first box. */
dp = dataptr + ibolo*bstride + itime*tstride;
/* Now loop round each box of time slices. */
for( iz = 0; iz < nz; iz++ ) {
/* The NOI model is filled with 1.0 values by smf_model_create, and can also
be set to zero to indicate missing values. Therefore convert both these
values into VAL__BADD. */
*(pd++) = (*dp == 0.0 || *dp == 1.0) ? VAL__BADD : *dp;
/* Move the input pointer on to the next box. */
dp += boxsize*tstride;
}
}
/* Store the box size as an extension item in the NDF. */
ndfXnew( indf, SMURF__EXTNAME, SMURF__EXTTYPE, 0, NULL, &xloc, status );
ndfXpt0i( boxsize, indf, SMURF__EXTNAME, "NOI_BOXSIZE", status );
datAnnul( &xloc, status );
}
/* Annul the NDF identifier. */
ndfAnnul( &indf, status );
}
void smurf_sc2fft( int *status ) {
int avpspec=0; /* Flag for doing average power spectrum */
double avpspecthresh=0; /* Threshold noise for detectors in avpspec */
Grp * basegrp = NULL; /* Basis group for output filenames */
smfArray *bbms = NULL; /* Bad bolometer masks */
smfArray *concat=NULL; /* Pointer to a smfArray */
size_t contchunk; /* Continuous chunk counter */
smfArray *darks = NULL; /* dark frames */
int ensureflat; /* Flag for flatfielding data */
Grp *fgrp = NULL; /* Filtered group, no darks */
smfArray *flatramps = NULL;/* Flatfield ramps */
AstKeyMap *heateffmap = NULL; /* Heater efficiency data */
size_t gcount=0; /* Grp index counter */
size_t i; /* Loop counter */
smfGroup *igroup=NULL; /* smfGroup corresponding to igrp */
Grp *igrp = NULL; /* Input group of files */
int inverse=0; /* If set perform inverse transform */
int isfft=0; /* Are data fft or real space? */
dim_t maxconcat=0; /* Longest continuous chunk length in samples */
size_t ncontchunks=0; /* Number continuous chunks outside iter loop */
smfData *odata=NULL; /* Pointer to output smfData to be exported */
Grp *ogrp = NULL; /* Output group of files */
size_t outsize; /* Total number of NDF names in the output group */
int polar=0; /* Flag for FFT in polar coordinates */
int power=0; /* Flag for squaring amplitude coeffs */
size_t size; /* Number of files in input group */
smfData *tempdata=NULL; /* Temporary smfData pointer */
int weightavpspec=0; /* Flag for 1/noise^2 weighting */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
int zerobad; /* Zero VAL__BADD before taking FFT? */
/* Main routine */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Get input file(s) */
kpg1Rgndf( "IN", 0, 1, "", &igrp, &size, status );
/* Filter out darks */
smf_find_science( igrp, &fgrp, 1, NULL, NULL, 1, 1, SMF__NULL, &darks,
&flatramps, &heateffmap, NULL, status );
/* input group is now the filtered group so we can use that and
free the old input group */
size = grpGrpsz( fgrp, status );
grpDelet( &igrp, status);
igrp = fgrp;
fgrp = NULL;
/* We now need to combine files from the same subarray and same sequence
to form a continuous time series */
smf_grp_related( igrp, size, 1, 0, 0, NULL, NULL, &maxconcat, NULL, &igroup,
&basegrp, NULL, status );
/* Get output file(s) */
size = grpGrpsz( basegrp, status );
if( size > 0 ) {
kpg1Wgndf( "OUT", basegrp, size, size, "More output files required...",
&ogrp, &outsize, status );
} else {
msgOutif(MSG__NORM, " ", TASK_NAME ": All supplied input frames were DARK,"
" nothing to do", status );
}
/* Get group of bolometer masks and read them into a smfArray */
smf_request_mask( "BBM", &bbms, status );
/* Obtain the number of continuous chunks and subarrays */
if( *status == SAI__OK ) {
ncontchunks = igroup->chunk[igroup->ngroups-1]+1;
}
msgOutiff( MSG__NORM, "", "Found %zu continuous chunk%s", status, ncontchunks,
(ncontchunks > 1 ? "s" : "") );
/* Are we flatfielding? */
parGet0l( "FLAT", &ensureflat, status );
/* Are we doing an inverse transform? */
parGet0l( "INVERSE", &inverse, status );
/* Are we using polar coordinates instead of cartesian for the FFT? */
parGet0l( "POLAR", &polar, status );
/* Are we going to assume amplitudes are squared? */
parGet0l( "POWER", &power, status );
/* Are we going to zero bad values first? */
parGet0l( "ZEROBAD", &zerobad, status );
/* Are we calculating the average power spectrum? */
parGet0l( "AVPSPEC", &avpspec, status );
if( avpspec ) {
power = 1;
parGet0d( "AVPSPECTHRESH", &avpspecthresh, status );
parGet0l( "WEIGHTAVPSPEC", &weightavpspec, status );
}
/* If power is true, we must be in polar form */
if( power && !polar) {
msgOutif( MSG__NORM, " ", TASK_NAME
": power spectrum requested so setting POLAR=TRUE", status );
polar = 1;
}
gcount = 1;
for( contchunk=0;(*status==SAI__OK)&&contchunk<ncontchunks; contchunk++ ) {
size_t idx;
/* Concatenate this continuous chunk but forcing a raw data read.
We will need quality. */
smf_concat_smfGroup( wf, NULL, igroup, darks, NULL, flatramps, heateffmap,
contchunk, ensureflat, 1, NULL, 0, NULL, NULL, 0, 0, 0,
&concat, NULL, status );
/* Now loop over each subarray */
/* Export concatenated data for each subarray to NDF file */
for( idx=0; (*status==SAI__OK)&&idx<concat->ndat; idx++ ) {
if( concat->sdata[idx] ) {
smfData * idata = concat->sdata[idx];
int provid = NDF__NOID;
dim_t nbolo; /* Number of detectors */
dim_t ndata; /* Number of data points */
/* Apply a mask to the quality array and data array */
smf_apply_mask( idata, bbms, SMF__BBM_QUAL|SMF__BBM_DATA, 0, status );
smf_get_dims( idata, NULL, NULL, &nbolo, NULL, &ndata, NULL, NULL,
status );
/* Check for double precision data */
if( idata->dtype != SMF__DOUBLE ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": data are not double precision.", status );
}
/* Are we zeroing VAL__BADD? */
if( (*status==SAI__OK) && zerobad ) {
double *data= (double *) idata->pntr[0];
for( i=0; i<ndata; i++ ) {
if( data[i] == VAL__BADD ) {
data[i] = 0;
}
}
}
/* Check whether we need to transform the data at all */
isfft = smf_isfft(idata,NULL,NULL,NULL,NULL,NULL,status);
if( isfft && avpspec && (*status == SAI__OK) ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME
": to calculate average power spectrum input data cannot "
"be FFT", status );
}
if( (*status == SAI__OK) && (isfft == inverse) ) {
if( avpspec ) {
/* If calculating average power spectrum do the transforms with
smf_bolonoise so that we can also measure the noise of
each detector */
double *whitenoise=NULL;
smf_qual_t *bolomask=NULL;
double mean, sig, freqlo;
size_t ngood, newgood;
whitenoise = astCalloc( nbolo, sizeof(*whitenoise) );
bolomask = astCalloc( nbolo, sizeof(*bolomask) );
freqlo = 1. / (idata->hdr->steptime * idata->hdr->nframes);
smf_bolonoise( wf, idata, 1, freqlo, SMF__F_WHITELO,
SMF__F_WHITEHI, 1, 0, whitenoise, NULL, &odata,
status );
/* Initialize quality */
for( i=0; i<nbolo; i++ ) {
if( whitenoise[i] == VAL__BADD ) {
bolomask[i] = SMF__Q_BADB;
} else {
/* smf_bolonoise returns a variance, so take sqrt */
whitenoise[i] = sqrt(whitenoise[i]);
}
}
ngood=-1;
newgood=0;
/* Iteratively cut n-sigma noisy outlier detectors */
while( ngood != newgood ) {
ngood = newgood;
smf_stats1D( whitenoise, 1, nbolo, bolomask, 1, SMF__Q_BADB,
&mean, &sig, NULL, NULL, status );
msgOutiff( MSG__DEBUG, "", TASK_NAME
": mean=%lf sig=%lf ngood=%li\n", status,
mean, sig, ngood);
newgood=0;
for( i=0; i<nbolo; i++ ) {
if( whitenoise[i] != VAL__BADD ){
if( (whitenoise[i] - mean) > avpspecthresh *sig ) {
whitenoise[i] = VAL__BADD;
bolomask[i] = SMF__Q_BADB;
} else {
newgood++;
}
}
}
}
msgOutf( "", TASK_NAME
": Calculating average power spectrum of best %li "
" bolometers.", status, newgood);
/* If using 1/noise^2 weights, calculate 1/whitenoise^2 in-place
to avoid allocating another array */
if( weightavpspec ) {
msgOutif( MSG__VERB, "", TASK_NAME ": using 1/noise^2 weights",
status );
for( i=0; i<nbolo; i++ ) {
if( whitenoise[i] && (whitenoise[i] != VAL__BADD) ) {
whitenoise[i] = 1/(whitenoise[i]*whitenoise[i]);
}
}
}
/* Calculate the average power spectrum of good detectors */
tempdata = smf_fft_avpspec( odata, bolomask, 1, SMF__Q_BADB,
weightavpspec ? whitenoise : NULL,
status );
smf_close_file( &odata, status );
whitenoise = astFree( whitenoise );
bolomask = astFree( bolomask );
odata = tempdata;
tempdata = NULL;
/* Store the number of good bolometers */
parPut0i( "NGOOD", newgood, status );
} else {
/* Otherwise do forward/inverse transforms here as needed */
/* If inverse transform convert to cartesian representation first */
if( inverse && polar ) {
smf_fft_cart2pol( wf, idata, 1, power, status );
}
/* Tranform the data */
odata = smf_fft_data( wf, idata, NULL, inverse, 0, status );
smf_convert_bad( wf, odata, status );
if( inverse ) {
/* If output is time-domain, ensure that it is ICD bolo-ordered */
smf_dataOrder( odata, 1, status );
} else if( polar ) {
/* Store FFT of data in polar form */
smf_fft_cart2pol( wf, odata, 0, power, status );
}
}
/* open a reference input file for provenance propagation */
ndgNdfas( basegrp, gcount, "READ", &provid, status );
/* Export the data to a new file */
smf_write_smfData( odata, NULL, NULL, ogrp, gcount, provid,
MSG__VERB, 0, status );
/* Free resources */
ndfAnnul( &provid, status );
smf_close_file( &odata, status );
} else {
msgOutif( MSG__NORM, " ",
"Data are already transformed. No output will be produced",
status );
}
}
/* Update index into group */
gcount++;
}
/* Close the smfArray */
smf_close_related( &concat, status );
}
/* Write out the list of output NDF names, annulling the error if a null
parameter value is supplied. */
if( *status == SAI__OK ) {
grpList( "OUTFILES", 0, 0, NULL, ogrp, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Tidy up after ourselves: release the resources used by the grp routines */
grpDelet( &igrp, status);
grpDelet( &ogrp, status);
if (basegrp) grpDelet( &basegrp, status );
if( igroup ) smf_close_smfGroup( &igroup, status );
if( flatramps ) smf_close_related( &flatramps, status );
if (heateffmap) heateffmap = smf_free_effmap( heateffmap, status );
if (bbms) smf_close_related( &bbms, status );
ndfEnd( status );
/* Ensure that FFTW doesn't have any used memory kicking around */
fftw_cleanup();
}
void smurf_unmakemap( int *status ) {
/* Local Variables */
AstFrameSet *wcsin = NULL; /* WCS Frameset for input cube */
AstMapping *skymap; /* GRID->SkyFrame Mapping from input WCS */
AstSkyFrame *abskyfrm; /* Input SkyFrame (always absolute) */
AstSkyFrame *skyfrm = NULL;/* SkyFrame from the input WCS Frameset */
Grp *igrp1 = NULL; /* Group of input sky files */
Grp *igrp2 = NULL; /* Group of input template files */
Grp *igrpc = NULL; /* Group of input COM files */
Grp *igrpg = NULL; /* Group of input GAI files */
Grp *igrpq = NULL; /* Group of input Q sky files */
Grp *igrpu = NULL; /* Group of input U sky files */
Grp *ogrp = NULL; /* Group containing output file */
HDSLoc *cloc = NULL; /* HDS locator for component ipdata structure */
HDSLoc *iploc = NULL; /* HDS locator for top level ipdata structure */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
char ipdata[ 200 ]; /* Text buffer for IPDATA value */
char pabuf[ 10 ]; /* Text buffer for parameter value */
char subarray[ 5 ]; /* Name of SCUBA-2 subarray (s8a,s8b,etc) */
dim_t iel; /* Index of next element */
dim_t ndata; /* Number of elements in array */
dim_t ntslice; /* Number of time slices in array */
double *ang_data = NULL; /* Pointer to the FP orientation angles */
double *angc_data = NULL; /* Pointer to the instrumental ANGC data */
double *c0_data = NULL; /* Pointer to the instrumental C0 data */
double *gai_data = NULL; /* Pointer to the input GAI map */
double *in_data = NULL; /* Pointer to the input I sky map */
double *inc_data = NULL; /* Pointer to the input COM data */
double *inq_data = NULL; /* Pointer to the input Q sky map */
double *inu_data = NULL; /* Pointer to the input U sky map */
double *outq_data = NULL; /* Pointer to the Q time series data */
double *outu_data = NULL; /* Pointer to the U time series data */
double *p0_data = NULL; /* Pointer to the instrumental P0 data */
double *p1_data = NULL; /* Pointer to the instrumental P1 data */
double *pd; /* Pointer to next element */
double *pq = NULL; /* Pointer to next Q time series value */
double *pu = NULL; /* Pointer to next U time series value */
double *qinst_data = NULL; /* Pointer to the instrumental Q data */
double *uinst_data = NULL; /* Pointer to the instrumental U data */
double amp16; /* Amplitude of 16 Hz signal */
double amp2; /* Amplitude of 2 Hz signal */
double amp4; /* Amplitude of 4 Hz signal */
double angrot; /* Angle from focal plane X axis to fixed analyser */
double paoff; /* WPLATE value corresponding to POL_ANG=0.0 */
double params[ 4 ]; /* astResample parameters */
double phase16; /* Phase of 16 Hz signal */
double phase2; /* Phase of 2 Hz signal */
double phase4; /* Phase of 4 Hz signal */
double sigma; /* Standard deviation of noise to add to output */
int alignsys; /* Align data in the map's system? */
int cdims[ 3 ]; /* Common-mode NDF dimensions */
int dims[ NDF__MXDIM ]; /* NDF dimensions */
int flag; /* Was the group expression flagged? */
int gdims[ 3 ]; /* GAI model NDF dimensions */
int harmonic; /* The requested harmonic */
int ifile; /* Input file index */
int indf; /* Input sky map NDF identifier */
int indfangc; /* IP ANGC values NDF identifier */
int indfc0; /* IP C0 values NDF identifier */
int indfc; /* Input COM NDF identifier */
int indfcs; /* NDF identifier for matching section of COM */
int indfg; /* Input GAI NDF identifier */
int indfin; /* Input template cube NDF identifier */
int indfiq; /* Input instrumental Q NDF */
int indfiu; /* Input instrumental U NDF */
int indfout; /* Output cube NDF identifier */
int indfp0; /* IP P0 values NDF identifier */
int indfp1; /* IP P1 values NDF identifier */
int indfq; /* Input Q map NDF identifier */
int indfu; /* Input U map NDF identifier */
int interp = 0; /* Pixel interpolation method */
int lbndc[ 3 ]; /* Array of lower bounds of COM NDF */
int moving; /* Is the telescope base position changing? */
int ndim; /* Number of pixel axes in NDF */
int ndimc; /* Number of pixel axes in common-mode NDF */
int ndimg; /* Number of pixel axes in GAI NDF */
int nel; /* Number of elements in array */
int nelc; /* Number of elements in COM array */
int nelg; /* Number of elements in GAI array */
int nelqu; /* Number of elements in Q or U array */
int ngood; /* No. of good values in putput cube */
int nparam = 0; /* No. of parameters required for interpolation scheme */
int pasign; /* Indicates sense of POL_ANG value */
int sdim[ 2 ]; /* Array of significant pixel axes */
int slbnd[ 2 ]; /* Array of lower bounds of input map */
int subnd[ 2 ]; /* Array of upper bounds of input map */
int ubndc[ 3 ]; /* Array of upper bounds of COM NDF */
size_t ncom; /* Number of com files */
size_t ngai; /* Number of gai files */
size_t nskymap; /* Number of supplied sky cubes */
size_t outsize; /* Number of files in output group */
size_t size; /* Number of files in input group */
smfData *odata = NULL; /* Pointer to output data struct */
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Get an identifier for the input NDF. We use NDG (via kpg1Rgndf)
instead of calling ndfAssoc directly since NDF/HDS has problems with
file names containing spaces, which NDG does not have. */
kpg1Rgndf( "IN", 1, 1, "", &igrp1, &nskymap, status );
ndgNdfas( igrp1, 1, "READ", &indf, status );
/* Map the data array in the input sky map. */
ndfMap( indf, "DATA", "_DOUBLE", "READ", (void **) &in_data, &nel,
status );
/* Get the WCS FrameSet from the sky map, together with its pixel index
bounds. */
kpg1Asget( indf, 2, 0, 1, 1, sdim, slbnd, subnd, &wcsin, status );
/* Check the current Frame is a SKY frame. */
skyfrm = astGetFrame( wcsin, AST__CURRENT );
if( !astIsASkyFrame( skyfrm ) && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( " ", " Current Frame in ^N is not a SKY Frame.", status );
}
/* Get a copy of the current frame that represents absolute coords rather
than offsets. We assume the target is moving if the map represents
offsets. */
moving = ( *status == SAI__OK &&
!strcmp( astGetC( skyfrm, "SkyRefIs" ), "Origin" ) ) ? 1 : 0;
abskyfrm = astCopy( skyfrm );
astClear( abskyfrm, "SkyRefIs" );
/* If the ALIGNSYS parameter is TRUE then we align the raw data with the
map in the current system of the map, rather than the default ICRS. */
parGet0l( "ALIGNSYS", &alignsys, status );
if( alignsys ) astSetC( abskyfrm, "AlignSystem", astGetC( abskyfrm,
"System" ) );
/* Get the Mapping from the Sky Frame to grid axis in the iput map. */
skymap = astGetMapping( wcsin, AST__CURRENT, AST__BASE );
/* Get the pixel interpolation scheme to use. */
parChoic( "INTERP", "NEAREST", "NEAREST,LINEAR,SINC,"
"SINCSINC,SINCCOS,SINCGAUSS,SOMB,SOMBCOS",
1, pabuf, 10, status );
if( !strcmp( pabuf, "NEAREST" ) ) {
interp = AST__NEAREST;
nparam = 0;
} else if( !strcmp( pabuf, "LINEAR" ) ) {
interp = AST__LINEAR;
nparam = 0;
} else if( !strcmp( pabuf, "SINC" ) ) {
interp = AST__SINC;
nparam = 1;
} else if( !strcmp( pabuf, "SINCSINC" ) ) {
interp = AST__SINCSINC;
nparam = 2;
} else if( !strcmp( pabuf, "SINCCOS" ) ) {
interp = AST__SINCCOS;
nparam = 2;
} else if( !strcmp( pabuf, "SINCGAUSS" ) ) {
interp = AST__SINCGAUSS;
nparam = 2;
} else if( !strcmp( pabuf, "SOMB" ) ) {
interp = AST__SOMB;
nparam = 1;
} else if( !strcmp( pabuf, "SOMBCOS" ) ) {
interp = AST__SOMBCOS;
nparam = 2;
} else if( *status == SAI__OK ) {
nparam = 0;
*status = SAI__ERROR;
msgSetc( "V", pabuf );
errRep( "", "Support not available for INTERP = ^V (programming "
"error)", status );
}
/* Get an additional parameter vector if required. */
if( nparam > 0 ) parExacd( "PARAMS", nparam, params, status );
/* Get a group of reference time series files to use as templates for
the output time series files.*/
ndgAssoc( "REF", 1, &igrp2, &size, &flag, status );
/* Get output file(s) */
kpg1Wgndf( "OUT", igrp2, size, size, "More output files required...",
&ogrp, &outsize, status );
/* Get he noise level to add to the output data. */
parGet0d( "SIGMA", &sigma, status );
/* Get any Q and U input maps. */
if( *status == SAI__OK ) {
kpg1Rgndf( "QIN", 1, 1, "", &igrpq, &nskymap, status );
ndgNdfas( igrpq, 1, "READ", &indfq, status );
ndfMap( indfq, "DATA", "_DOUBLE", "READ", (void **) &inq_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "Q", indfq );
*status = SAI__ERROR;
errRep( "", "Q image '^Q' is not the same size as the I image.",
status );
}
kpg1Rgndf( "UIN", 1, 1, "", &igrpu, &nskymap, status );
ndgNdfas( igrpu, 1, "READ", &indfu, status );
ndfMap( indfu, "DATA", "_DOUBLE", "READ", (void **) &inu_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "U", indfu );
*status = SAI__ERROR;
errRep( "", "U image '^U' is not the same size as the I image.",
status );
}
if( *status == PAR__NULL ) {
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
inq_data = NULL;
inu_data = NULL;
errAnnul( status );
} else {
parGet0d( "ANGROT", &angrot, status );
parGet0d( "PAOFF", &paoff, status );
parGet0l( "PASIGN", &pasign, status );
}
}
/* Get any common-mode files. */
if( *status == SAI__OK ) {
kpg1Rgndf( "COM", size, size, "", &igrpc, &ncom, status );
if( *status == PAR__NULL ) {
errAnnul( status );
ncom = 0;
}
}
/* Get any GAI files. */
if( *status == SAI__OK ) {
kpg1Rgndf( "GAI", size, size, "", &igrpg, &ngai, status );
if( *status == PAR__NULL ) {
errAnnul( status );
ngai = 0;
}
}
/* Get any instrumental polarisation files. */
if( *status == SAI__OK ) {
/* First see if the user wants to use the "INSTQ/INSTU" scheme for
specifying instrumental polarisation. */
ndfAssoc( "INSTQ", "Read", &indfiq, status );
ndfAssoc( "INSTU", "Read", &indfiu, status );
if( *status == PAR__NULL ) {
ndfAnnul( &indfiq, status );
ndfAnnul( &indfiu, status );
errAnnul( status );
} else {
msgOut( " ", "Using user-defined IP model", status );
ndfDim( indfiq, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfiq );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfiq, "DATA", "_DOUBLE", "READ", (void **) &qinst_data,
&nel, status );
}
ndfDim( indfiu, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfiu );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfiu, "DATA", "_DOUBLE", "READ", (void **) &uinst_data,
&nel, status );
}
}
/* If not, see if the user wants to use the Johnstone/Kennedy instrumental
polarisation model. The IPDATA parameter gives the path to an HDS
container file contining NDFs holding the required IP data for all
subarrays. */
if( !qinst_data ) {
parGet0c( "IPDATA", ipdata, sizeof(ipdata), status );
if( *status == PAR__NULL ) {
errAnnul( status );
} else {
msgOutf( " ", "Using Johnstone/Kennedy IP model in %s",
status, ipdata );
hdsOpen( ipdata, "READ", &iploc, status );
}
}
}
/* Loop round all the template time series files. */
for( ifile = 1; ifile <= (int) size && *status == SAI__OK; ifile++ ) {
/* Start a new NDF context. */
ndfBegin();
/* Create the output NDF by propagating everything from the input, except
for quality and variance. */
ndgNdfas( igrp2, ifile, "READ", &indfin, status );
ndfMsg( "FILE", indfin );
msgSeti( "THISFILE", ifile );
msgSeti( "NUMFILES", size );
msgOutif( MSG__NORM, " ", "Simulating ^THISFILE/^NUMFILES ^FILE",
status );
ndgNdfpr( indfin, "DATA,HISTORY,LABEL,TITLE,WCS,UNITS,EXTENSION(*)",
ogrp, ifile, &indfout, status );
ndfAnnul( &indfin, status );
ndfAnnul( &indfout, status );
/* We now re-open the output NDF and then modify its data values. */
smf_open_file( wf, ogrp, ifile, "UPDATE", 0, &odata, status );
/* Issue a suitable message and abort if anything went wrong. */
if( *status != SAI__OK ) {
errRep( FUNC_NAME, "Could not open input template file.", status );
break;
} else {
if( odata->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( odata->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
}
}
/* Check the reference time series contains double precision values. */
smf_dtype_check_fatal( odata, NULL, SMF__DOUBLE, status );
/* Get the total number of data elements, and the number of time slices. */
smf_get_dims( odata, NULL, NULL, NULL, &ntslice, &ndata, NULL,
NULL, status );
/* Get the subarray name */
smf_fits_getS( odata->hdr, "SUBARRAY", subarray, sizeof(subarray),
status );
/* If we are using the Johnstone/Kennedy IP model, open and map the
relevant parameter NDFs within the IPDATA container file. */
if( iploc ) {
datFind( iploc, subarray, &cloc, status );
ndfFind( cloc, "C0", &indfc0, status );
ndfDim( indfc0, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfc0 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfc0, "DATA", "_DOUBLE", "READ", (void **) &c0_data,
&nel, status );
}
ndfFind( cloc, "P0", &indfp0, status );
ndfDim( indfp0, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfp0 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfp0, "DATA", "_DOUBLE", "READ", (void **) &p0_data,
&nel, status );
}
ndfFind( cloc, "P1", &indfp1, status );
ndfDim( indfp1, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfp1 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfp1, "DATA", "_DOUBLE", "READ", (void **) &p1_data,
&nel, status );
}
ndfFind( cloc, "ANGC", &indfangc, status );
ndfDim( indfangc, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfangc );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfangc, "DATA", "_DOUBLE", "READ", (void **) &angc_data,
&nel, status );
}
}
/* Open any COM file. */
if( ncom ) {
ndgNdfas( igrpc, ifile, "READ", &indfc, status );
ndfDim( indfc, 3, cdims, &ndimc, status );
/* Check its dimensions. */
if( *status == SAI__OK ) {
if( ndimc == 1 ) {
if( cdims[ 0 ] < (int) ntslice ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
ndfMsg( "R", indfin );
msgSeti( "N", cdims[ 0 ] );
msgSeti( "M", ntslice );
errRep( " ", "Supplied COM file (^C) has ^N time-slices, but "
"the reference NDF (^R) has ^M time-slices.", status );
} else {
ndfBound( indfc, 3, lbndc, ubndc, &ndimc, status );
ubndc[ 0 ] = lbndc[ 0 ] + ntslice - 1;
ndfSect( indfc, 1, lbndc, ubndc, &indfcs, status );
}
} else if( ndimc == 3 ) {
if( cdims[ 0 ] != 1 || cdims[ 1 ] != 1 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
errRep( " ", "Supplied 3D COM file (^C) has bad "
"dimensions for axis 1 and/or 2 (should "
"both be 1 pixel long).", status );
} else if( cdims[ 2 ] < (int) ntslice ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
ndfMsg( "R", indfin );
msgSeti( "N", cdims[ 2 ] );
msgSeti( "M", ntslice );
errRep( " ", "Supplied COM file (^C) has ^N time-slices, but "
"the reference NDF (^R) has ^M time-slices.", status );
} else {
ndfBound( indfc, 3, lbndc, ubndc, &ndimc, status );
ubndc[ 2 ] = lbndc[ 2 ] + ntslice - 1;
ndfSect( indfc, 3, lbndc, ubndc, &indfcs, status );
}
} else {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
msgSeti( "N", ndimc );
errRep( " ", "Supplied COM file (^C) has ^N dimensions - "
"must be 3.", status );
}
}
ndfMap( indfcs, "DATA", "_DOUBLE", "READ", (void **) &inc_data,
&nelc, status );
} else {
indfcs = NDF__NOID;
inc_data = NULL;
}
/* Open any GAI files. */
if( ngai ) {
ndgNdfas( igrpg, ifile, "READ", &indfg, status );
ndfDim( indfg, 3, gdims, &ndimg, status );
/* Check its dimensions, and map it if OK. */
if( *status == SAI__OK ) {
if( ndimg != 2 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfg );
msgSeti( "N", ndimg );
errRep( " ", "Supplied GAI file (^C) has ^N dimensions - "
"must be 2.", status );
} else if( gdims[ 0 ] != 32 || gdims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfg );
errRep( " ", "Supplied GAI file (^C) has has bad "
"dimensions - should be 32x40.", status );
}
}
ndfMap( indfg, "DATA", "_DOUBLE", "READ", (void **) &gai_data,
&nelg, status );
} else {
indfg = NDF__NOID;
gai_data = NULL;
}
/* Fill the output with bad values. */
if( *status == SAI__OK ) {
pd = odata->pntr[ 0 ];
for( iel = 0; iel < ndata; iel++ ) *(pd++) = VAL__BADD;
}
/* Resample the sky map data into the output time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, in_data, odata->pntr[ 0 ],
NULL, &ngood, status );
/* Add on any COM data. */
smf_addcom( wf, odata, inc_data, status );
/* Issue a wrning if there is no good data in the output cube. */
if( ngood == 0 ) msgOutif( MSG__NORM, " ", " Output contains no "
"good data values.", status );
/* If Q and U maps have been given, allocate room to hold resampled Q and
U values, and fill them with bad values. */
if( inq_data && inu_data ) {
pq = outq_data = astMalloc( ndata*sizeof( *outq_data ) );
pu = outu_data = astMalloc( ndata*sizeof( *outu_data ) );
if( *status == SAI__OK ) {
for( iel = 0; iel < ndata; iel++ ) {
*(pu++) = VAL__BADD;
*(pq++) = VAL__BADD;
}
}
/* Determine the harmonic to use. */
parGet0i( "HARMONIC", &harmonic, status );
/* If producing the normal 8 Hz harmonic, get the amplitude and phase of a
other signals to add onto the 8 Hz signal. */
if( harmonic == 4 ) {
parGet0d( "AMP2", &2, status );
parGet0d( "PHASE2", &phase2, status );
parGet0d( "AMP4", &4, status );
parGet0d( "PHASE4", &phase4, status );
parGet0d( "AMP16", &16, status );
parGet0d( "PHASE16", &phase16, status );
} else {
amp2 = 0.0;
phase2 = 0.0;
amp4 = 0.0;
phase4 = 0.0;
amp16 = 0.0;
phase16 = 0.0;
}
/* Allocate room for an array to hold the angle from the Y pixel axis
in the sky map to the focal plane Y axis, in radians, at each time
slice. Positive rotation is in the same sense as rotation from
focal plane X to focal plane Y. */
ang_data = astMalloc( ntslice*sizeof( *ang_data ) );
/* Resample them both into 3D time series. These Q/U values arw with
respect to the sky image Y axis. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inq_data, outq_data,
ang_data, &ngood, status );
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inu_data, outu_data,
NULL, &ngood, status );
/* Combine these time series with the main output time series so that the
main output is analysed intensity. */
smf_uncalc_iqu( wf, odata, odata->pntr[ 0 ], outq_data, outu_data,
ang_data, pasign, AST__DD2R*paoff, AST__DD2R*angrot,
amp2, AST__DD2R*phase2, amp4, AST__DD2R*phase4,
amp16, AST__DD2R*phase16, qinst_data, uinst_data,
c0_data, p0_data, p1_data, angc_data, harmonic,
status );
/* Release work space. */
outq_data = astFree( outq_data );
outu_data = astFree( outu_data );
ang_data = astFree( ang_data );
}
/* Factor in any GAI data. */
smf_addgai( wf, odata, gai_data, status );
/* Close the output time series file. */
smf_close_file( wf, &odata, status );
/* Close the IP data container for the current subarray, if it is open. */
if( cloc ) datAnnul( &cloc, status );
/* End the NDF context. */
ndfEnd( status );
}
/* Close any input data file that is still open due to an early exit from
the above loop. */
if( odata != NULL ) {
smf_close_file( wf, &odata, status );
odata = NULL;
}
/* Free remaining resources. */
if( igrp1 != NULL) grpDelet( &igrp1, status);
if( igrp2 != NULL) grpDelet( &igrp2, status);
if( igrpq != NULL) grpDelet( &igrpq, status);
if( igrpu != NULL) grpDelet( &igrpu, status);
if( igrpc != NULL) grpDelet( &igrpc, status);
if( igrpg != NULL) grpDelet( &igrpg, status);
if( ogrp != NULL) grpDelet( &ogrp, status);
if( iploc ) datAnnul( &iploc, status );
/* End the NDF context. */
ndfEnd( status );
/* End the tile's AST context. */
astEnd;
/* Issue a status indication.*/
if( *status == SAI__OK ) {
msgOutif(MSG__VERB," ",TASK_NAME " succeeded, time series written.", status);
} else {
msgOutif(MSG__VERB," ",TASK_NAME " failed.", status);
}
}
