/*
* Install interface into kernel networking data structures.
*/
void
ne_xsurf_attach(device_t parent, device_t self, void *aux)
{
struct ne_xsurf_softc *zsc = device_private(self);
struct ne2000_softc *nsc = &zsc->sc_ne2000;
struct dp8390_softc *dsc = &nsc->sc_dp8390;
struct xsurfbus_attach_args *xap = aux;
bus_space_tag_t nict = &zsc->sc_bst;
bus_space_handle_t nich;
bus_space_tag_t asict = nict;
bus_space_handle_t asich;
dsc->sc_dev = self;
dsc->sc_mediachange = rtl80x9_mediachange;
dsc->sc_mediastatus = rtl80x9_mediastatus;
dsc->init_card = rtl80x9_init_card;
dsc->sc_media_init = rtl80x9_media_init;
zsc->sc_bst.base = xap->xaa_base;
zsc->sc_bst.absm = &amiga_bus_stride_2;
aprint_normal("\n");
/* Map i/o space. */
if (bus_space_map(nict, NE_XSURF_NICBASE,
NE_XSURF_NPORTS, 0, &nich)) {
aprint_error_dev(self, "can't map nic i/o space\n");
return;
}
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE_XSURF_ASICSIZE, &asich)) {
aprint_error_dev(self, "can't map asic i/o space\n");
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, NULL);
zsc->sc_isr.isr_intr = dp8390_intr;
zsc->sc_isr.isr_arg = dsc;
zsc->sc_isr.isr_ipl = 2;
add_isr(&zsc->sc_isr);
}
void
ne_obio_attach(device_t parent, device_t self, void *aux )
{
struct ne_obio_softc *sc = device_private(self);
struct obio_attach_args *oba = aux;
bus_space_tag_t iot = oba->oba_iot;
bus_space_handle_t nioh, aioh;
uint8_t my_ea[ETHER_ADDR_LEN];
int i;
aprint_normal("\n");
sc->nsc.sc_dp8390.sc_dev = self;
/* Map i/o space. */
if (bus_space_map(iot, oba->oba_addr, NE2000_NPORTS, 0, &nioh))
return;
if (bus_space_subregion(iot, nioh, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &aioh))
goto out2;
sc->nsc.sc_dp8390.sc_regt = iot;
sc->nsc.sc_dp8390.sc_regh = nioh;
sc->nsc.sc_asict = iot;
sc->nsc.sc_asich = aioh;
/*
* XXX:
* AX88796's reset register doesn't seem to work, and
* ne2000_detect() fails. We hardcord NIC type here.
*/
sc->nsc.sc_type = NE2000_TYPE_NE2000; /* XXX _AX88796 ? */
sc->nsc.sc_dp8390.sc_flags = DP8390_NO_REMOTE_DMA_COMPLETE;
/* DP8390_NO_MULTI_BUFFERING; XXX */
/* G4250EBX doesn't have EEPROM hooked to AX88796. Read MAC
* address set by Redboot and don't let ne2000_atthch() try to
* read MAC from hardware. (current ne2000 driver doesn't
* support AX88796's EEPROM interface)
*/
bus_space_write_1( iot, nioh, ED_P0_CR, ED_CR_RD2|ED_CR_PAGE_1 );
for( i=0; i < ETHER_ADDR_LEN; ++i )
my_ea[i] = bus_space_read_1( iot, nioh, ED_P1_PAR0+i );
bus_space_write_1( iot, nioh, ED_P0_CR, ED_CR_RD2|ED_CR_PAGE_0 );
/* disable all interrupts */
bus_space_write_1(iot, nioh, ED_P0_IMR, 0);
#ifdef DEBUG_GPIO
bus_space_write_4( pxa2x0_softc->saip.sc_iot,
pxa2x0_softc->saip.sc_gpioh,
GPIO_GPDR0, (0x01<<DEBUG_GPIO) | (0x01<<DEBUG_GPIO2) |
bus_space_read_4(pxa2x0_softc->saip.sc_iot, pxa2x0_softc->saip.sc_gpioh,
GPIO_GPDR0));
#endif
/* delay intr_establish until this IF is enabled
to avoid spurious interrupts. */
sc->nsc.sc_dp8390.sc_enabled = 0;
sc->nsc.sc_dp8390.sc_enable = ne_obio_enable;
sc->intr_no = oba->oba_intr;
if( ne2000_attach( &sc->nsc, my_ea ) )
goto out;
#ifndef ED_DCR_RDCR
#define ED_DCR_RDCR 0
#endif
bus_space_write_1(iot, nioh, ED_P0_DCR, ED_DCR_RDCR|ED_DCR_WTS);
return;
out:
bus_space_unmap( iot, aioh, NE2000_ASIC_NPORTS );
out2:
bus_space_unmap( iot, nioh, NE2000_NPORTS );
return;
}
static void
ne_mainbus_attach(device_t parent, device_t self, void *aux)
{
struct ne_mainbus_softc *msc = device_private(self);
struct ne2000_softc *nsc = &msc->sc_ne2000;
struct dp8390_softc *dsc = &nsc->sc_dp8390;
bus_space_tag_t nict = &t_sh7706lan_bus_io;
bus_space_handle_t nich;
bus_space_tag_t asict = nict;
bus_space_handle_t asich;
const char *typestr;
int netype;
dsc->sc_dev = self;
aprint_naive("\n");
aprint_normal("\n");
/* Map i/o space. */
if (bus_space_map(nict, 0x10000300, NE2000_NPORTS, 0, &nich)){
aprint_error_dev(self, "can't map i/o space\n");
return;
}
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &asich)) {
aprint_error_dev(self, "can't subregion i/o space\n");
bus_space_unmap(nict, nich, NE2000_NPORTS);
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/*
* Detect it again, so we can print some information about the
* interface.
*/
netype = ne2000_detect(nict, nich, asict, asich);
switch (netype) {
case NE2000_TYPE_NE1000:
typestr = "NE1000";
break;
case NE2000_TYPE_NE2000:
typestr = "NE2000";
break;
case NE2000_TYPE_RTL8019:
typestr = "NE2000 (RTL8019)";
break;
default:
aprint_error_dev(self, "where did the card go?!\n");
bus_space_unmap(nict, nich, NE2000_NPORTS);
return;
}
aprint_normal_dev(self, "%s Ethernet\n", typestr);
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/* force 8bit */
nsc->sc_quirk |= NE2000_QUIRK_8BIT;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, NULL);
/* Establish the interrupt handler. */
msc->sc_ih = intc_intr_establish(SH7709_INTEVT2_IRQ2, IST_LEVEL,
IPL_NET, dp8390_intr, dsc);
if (msc->sc_ih == NULL)
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
}
static void
ne_isapnp_attach(struct device *parent, struct device *self, void *aux)
{
struct ne_isapnp_softc * const isc = (struct ne_isapnp_softc *)self;
struct ne2000_softc * const nsc = &isc->sc_ne2000;
struct dp8390_softc * const dsc = &nsc->sc_dp8390;
struct isa_attach_args * const ipa = aux;
bus_space_tag_t nict;
bus_space_handle_t nich;
bus_space_tag_t asict;
bus_space_handle_t asich;
const char *typestr;
int netype;
nict = ipa->ia_iot;
nich = ipa->ipa_io[0].h;
asict = nict;
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &asich)) {
printf("%s: can't subregion i/o space\n", dsc->sc_dev.dv_xname);
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/*
* Detect it again, so we can print some information about the
* interface.
*/
netype = ne2000_detect(nsc);
switch (netype) {
case NE2000_TYPE_NE1000:
typestr = "NE1000";
break;
case NE2000_TYPE_NE2000:
typestr = "NE2000";
/*
* Check for a RealTek 8019.
*/
bus_space_write_1(nict, nich, ED_P0_CR,
ED_CR_PAGE_0 | ED_CR_STP);
if (bus_space_read_1(nict, nich, NERTL_RTL0_8019ID0) ==
RTL0_8019ID0 &&
bus_space_read_1(nict, nich, NERTL_RTL0_8019ID1) ==
RTL0_8019ID1) {
typestr = "NE2000 (RTL8019)";
dsc->sc_mediachange = rtl80x9_mediachange;
dsc->sc_mediastatus = rtl80x9_mediastatus;
dsc->init_card = rtl80x9_init_card;
dsc->sc_media_init = rtl80x9_media_init;
}
break;
default:
printf(": where did the card go?!\n");
return;
}
printf(": %s", typestr);
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, NULL);
/* Establish the interrupt handler. */
isc->sc_ih = isa_intr_establish(ipa->ia_ic, ipa->ipa_irq[0].num,
IST_EDGE, IPL_NET, dp8390_intr, dsc,
dsc->sc_dev.dv_xname);
if (isc->sc_ih == NULL)
printf(": couldn't establish interrupt handler\n");
}
void
ne_mca_attach(device_t parent, device_t self, void *aux)
{
struct ne_mca_softc *psc = device_private(self);
struct ne2000_softc *nsc = &psc->sc_ne2000;
struct dp8390_softc *dsc = &nsc->sc_dp8390;
struct mca_attach_args *ma = aux;
bus_space_tag_t nict;
bus_space_handle_t nich;
bus_space_tag_t asict;
bus_space_handle_t asich;
int pos2, iobase, irq;
const struct ne_mca_products *np;
dsc->sc_dev = self;
pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
/*
* POS register 2: (adf pos0)
*
* 7 6 5 4 3 2 1 0
* \_/ | \___/ \__ enable: 0=adapter disabled, 1=adapter enabled
* | | \____ I/O, Mem: 001=0x1000-0x102f 010=0x2020-0x204f
* | | 011=0x8020-0x804f 100=0xa0a0-0xa0cf
* | | 101=0xb0b0-0xb0df 110=0xc0c0-0xc0ef
* \ \ 111=0xc3d0-0xc3ff
* \ \________ Boot Rom: 1=disabled 0=enabled
* \__________ Interrupt level: 00=3 01=4 10=5 11=9
*/
np = ne_mca_lookup(ma->ma_id);
iobase = ne_mca_iobase[(pos2 & 0x0e) >> 1];
irq = ne_mca_irq[(pos2 & 0x60) >> 5];
aprint_normal(" slot %d irq %d: %s\n", ma->ma_slot + 1, irq,
np->ne_name);
nict = ma->ma_iot;
/* Map the device. */
if (bus_space_map(nict, iobase, NE2_NPORTS, 0, &nich)) {
aprint_error_dev(self, "can't map i/o space\n");
return;
}
asict = nict;
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &asich)) {
aprint_error_dev(self, "can't subregion i/o space\n");
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/* This interface is always enabled. */
dsc->sc_enabled = 1;
dsc->sc_mediachange = NULL;
dsc->sc_mediastatus = NULL;
dsc->sc_media_init = NULL;
dsc->init_card = NULL;
/*
* This is necessary for NE/2. Hopefully the other clones also work
* this way.
*/
nsc->sc_type = NE2000_TYPE_AX88190;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
if (ne2000_attach(nsc, NULL))
return;
/* establish interrupt handler */
psc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_NET, dp8390_intr,
dsc);
if (psc->sc_ih == NULL) {
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
return;
}
}
void
ne_neptune_attach(device_t parent, device_t self, void *aux)
{
struct ne_neptune_softc *nsc = device_private(self);
struct dp8390_softc *dsc = &nsc->sc_dp8390;
struct neptune_attach_args *na = aux;
bus_space_tag_t nict = na->na_bst;
bus_space_handle_t nich;
bus_space_tag_t asict = nict;
bus_space_handle_t asich;
const char *typestr;
int netype;
dsc->sc_dev = self;
aprint_normal("\n");
/* Map i/o space. */
if (bus_space_map(nict, na->na_addr, NE2000_NPORTS*2, 0, &nich)) {
aprint_error_dev(self, "can't map i/o space\n");
return;
}
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS*2, &asich)) {
aprint_error_dev(self, "can't subregion i/o space\n");
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/*
* Detect it again, so we can print some information about the
* interface.
*/
netype = ne2000_detect(nict, nich, asict, asich);
switch (netype) {
case NE2000_TYPE_NE1000:
typestr = "NE1000";
break;
case NE2000_TYPE_NE2000:
typestr = "NE2000";
break;
case NE2000_TYPE_RTL8019:
typestr = "NE2000 (RTL8019)";
break;
default:
aprint_error_dev(self, "where did the card go?!\n");
return;
}
aprint_normal_dev(self, "%s Ethernet\n", typestr);
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, NULL);
/* Establish the interrupt handler. */
if (neptune_intr_establish(na->na_intr, "ne", dp8390_intr, dsc))
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
}
static void
ne_intio_attach(device_t parent, device_t self, void *aux)
{
struct ne_intio_softc *sc = device_private(self);
struct dp8390_softc *dsc = &sc->sc_dp8390;
struct intio_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_bst;
bus_space_handle_t ioh;
bus_space_tag_t asict;
bus_space_handle_t asich;
const char *typestr;
int netype;
dsc->sc_dev = self;
aprint_normal(": Nereid Ethernet\n");
/* Map I/O space */
if (bus_space_map(iot, ia->ia_addr, NE2000_NPORTS*2,
BUS_SPACE_MAP_SHIFTED_EVEN, &ioh)){
aprint_error_dev(self, "can't map I/O space\n");
return;
}
asict = iot;
if (bus_space_subregion(iot, ioh, NE2000_ASIC_OFFSET*2,
NE2000_ASIC_NPORTS*2, &asich)) {
aprint_error_dev(self, "can't subregion I/O space\n");
return;
}
dsc->sc_regt = iot;
dsc->sc_regh = ioh;
sc->sc_asict = asict;
sc->sc_asich = asich;
/*
* detect it again, so we can print some information about
* the interface.
* XXX: Should I check NE1000 or NE2000 for Nereid?
*/
netype = ne2000_detect(iot, ioh, asict, asich);
switch (netype) {
case NE2000_TYPE_NE1000:
typestr = "NE1000";
break;
case NE2000_TYPE_NE2000:
typestr = "NE2000";
break;
case NE2000_TYPE_RTL8019:
typestr = "NE2000 (RTL8019)";
break;
default:
aprint_error_dev(self, "where did the card go?!\n");
return;
}
aprint_normal_dev(self, "%s Ethernet\n", typestr);
/* This interface is always enabled */
dsc->sc_enabled = 1;
/*
* Do generic NE2000 attach.
* This will read the mac address from the EEPROM.
*/
ne2000_attach(sc, NULL);
/* Establish the interrupt handler */
if (intio_intr_establish(ia->ia_intr, "ne", dp8390_intr, dsc))
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
}
void
ne_mainbus_attach(device_t parent, device_t self, void *aux)
{
struct ne2000_softc *sc = device_private(self);
struct dp8390_softc *dsc = &sc->sc_dp8390;
struct mainbus_attach_args *ma = aux;
bus_space_tag_t nict, asict;
bus_space_handle_t nich, asich;
int netype;
const char *typestr;
void *ih;
dsc->sc_dev = self;
aprint_normal("\n");
/* Map i/o space. */
nict = SH3_BUS_SPACE_PCMCIA_IO;
if (bus_space_map(nict, ma->ma_addr1, NE2000_NPORTS, 0, &nich)) {
aprint_error_dev(self, "can't map i/o space\n");
return;
}
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &asich)) {
aprint_error_dev(self, "can't subregion i/o space\n");
return;
}
asict = nict;
dsc->sc_regt = nict;
dsc->sc_regh = nich;
sc->sc_asict = asict;
sc->sc_asich = asich;
/*
* Detect it again, so we can print some information about the
* interface.
*/
netype = ne2000_detect(nict, nich, asict, asich);
switch (netype) {
case NE2000_TYPE_RTL8019:
typestr = "NE2000 (RTL8019)";
break;
case NE2000_TYPE_NE1000:
case NE2000_TYPE_NE2000:
default:
aprint_error_dev(self, "where did the card go?!\n");
return;
}
aprint_normal_dev(self, "%s Ethernet\n", typestr);
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(sc, NULL);
/* Establish the interrupt handler. */
ih = mmeye_intr_establish(ma->ma_irq1, IST_LEVEL, IPL_NET,
dp8390_intr, dsc);
if (ih == NULL)
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
}
static void
ne_pci_attach(device_t parent, device_t self, void *aux)
{
struct ne_pci_softc *psc = device_private(self);
struct ne2000_softc *nsc = &psc->sc_ne2000;
struct dp8390_softc *dsc = &nsc->sc_dp8390;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
bus_space_tag_t nict;
bus_space_handle_t nich;
bus_space_tag_t asict;
bus_space_handle_t asich;
const char *intrstr;
const struct ne_pci_product *npp;
pci_intr_handle_t ih;
pcireg_t csr;
char intrbuf[PCI_INTRSTR_LEN];
npp = ne_pci_lookup(pa);
if (npp == NULL) {
printf("\n");
panic("ne_pci_attach: impossible");
}
dsc->sc_dev = self;
printf(": %s Ethernet\n", npp->npp_name);
#ifdef IPKDB_NE_PCI
if (ne_pci_isipkdb(pc, pa->pa_tag)) {
nict = ipkdb_softc.sc_ne2000.sc_dp8390.sc_regt;
nich = ipkdb_softc.sc_ne2000.sc_dp8390.sc_regh;
ne_kip->port = nsc;
} else
#endif
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
&nict, &nich, NULL, NULL)) {
aprint_error_dev(dsc->sc_dev, "can't map i/o space\n");
return;
}
asict = nict;
if (bus_space_subregion(nict, nich, NE2000_ASIC_OFFSET,
NE2000_ASIC_NPORTS, &asich)) {
aprint_error_dev(dsc->sc_dev, "can't subregion i/o space\n");
return;
}
dsc->sc_regt = nict;
dsc->sc_regh = nich;
nsc->sc_asict = asict;
nsc->sc_asich = asich;
/* Enable the card. */
csr = pci_conf_read(pc, pa->pa_tag,
PCI_COMMAND_STATUS_REG);
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MASTER_ENABLE);
/* This interface is always enabled. */
dsc->sc_enabled = 1;
dsc->sc_mediachange = npp->npp_mediachange;
dsc->sc_mediastatus = npp->npp_mediastatus;
dsc->sc_media_init = npp->npp_media_init;
dsc->init_card = npp->npp_init_card;
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, NULL);
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(dsc->sc_dev, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf));
psc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, dp8390_intr, dsc);
if (psc->sc_ih == NULL) {
aprint_error_dev(dsc->sc_dev, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
aprint_normal_dev(dsc->sc_dev, "interrupting at %s\n", intrstr);
}
/*
* Install interface into kernel networking data structures.
*/
static void
ne_pbus_attach(device_t parent, device_t self, void *aux)
{
struct podule_attach_args *pa = (void *)aux;
struct ne_pbus_softc *npsc = device_private(self);
struct ne2000_softc *nsc = &npsc->sc_ne2000;
struct dp8390_softc *dsc = &nsc->sc_dp8390;
struct ne_clone *ne = NULL;
uint8_t buffer[6];
uint8_t *myea;
int loop;
dsc->sc_dev = self;
/* Check a few things about the attach args */
if (pa->pa_podule_number == -1)
panic("Podule has disappeared !");
npsc->sc_podule_number = pa->pa_podule_number;
npsc->sc_podule = pa->pa_podule;
podules[npsc->sc_podule_number].attached = 1; /* XXX */
/* Scan the list of known interfaces for a match */
for (loop = 0; loop < sizeof(ne_clones) / sizeof(struct ne_clone);
++loop) {
if (pa->pa_product == ne_clones[loop].product) {
ne = &ne_clones[loop];
break;
}
}
#ifdef DIAGNOSTIC
/* This should never fail as we must have matched at probe time */
if (ne == NULL)
panic("Podule has vanished");
#endif
/* Update the nic and asic base addresses appropriately */
switch (ne->nicspace) {
case NE_SPACE_EASI:
ne->nicbase += npsc->sc_podule->easi_base;
break;
case NE_SPACE_MOD:
ne->nicbase += npsc->sc_podule->mod_base;
break;
case NE_SPACE_FAST:
default:
ne->nicbase += npsc->sc_podule->fast_base;
break;
}
switch (ne->asicspace) {
case NE_SPACE_EASI:
ne->asicbase += npsc->sc_podule->easi_base;
break;
case NE_SPACE_MOD:
ne->asicbase += npsc->sc_podule->mod_base;
break;
case NE_SPACE_FAST:
default:
ne->asicbase += npsc->sc_podule->fast_base;
break;
}
switch (ne->extraspace) {
case NE_SPACE_EASI:
ne->extrabase += npsc->sc_podule->easi_base;
break;
case NE_SPACE_MOD:
ne->extrabase += npsc->sc_podule->mod_base;
break;
case NE_SPACE_FAST:
default:
ne->extrabase += npsc->sc_podule->fast_base;
break;
}
/* Report the interface name */
aprint_normal(": %s ethernet\n", ne->name);
/*
* Ok we need our own bus tag as the register spacing
* may not the default.
*
* For the podulebus, the bus tag cookie is the shift
* to apply to registers
* So duplicate the bus space tag and change the
* cookie.
*/
npsc->sc_tag = *pa->pa_iot;
npsc->sc_tag.bs_cookie = (void *) ne->cookie;
dsc->sc_regt = &npsc->sc_tag;
nsc->sc_asict = dsc->sc_regt;
/* Map all the I/O space for the NIC */
if (bus_space_map(dsc->sc_regt, ne->nicbase, ne->nicsize,
0, &dsc->sc_regh)) {
aprint_error_dev(self, "cannot map i/o space\n");
return;
}
/* Map the I/O space for the ASIC */
if (bus_space_map(nsc->sc_asict, ne->asicbase, ne->asicsize,
0, &nsc->sc_asich)) {
aprint_error_dev(self, "cannot map i/o space\n");
return;
}
/* Map any extra register space required by the card */
if (ne->extrasize > 0) {
if (bus_space_map(&npsc->sc_tag, ne->extrabase, ne->extrasize,
0, &npsc->sc_extrah)) {
aprint_error_dev(self, "cannot map extra space\n");
return;
}
}
/* This interface is always enabled. */
dsc->sc_enabled = 1;
/*
* Now get the ethernet address in an interface specific manner if
* specified
*/
if (ne->getea)
myea = ne->getea(npsc, buffer);
else
myea = NULL;
/* Does the interface need a preattach call ? */
if (ne->preattach)
ne->preattach(npsc);
/* if the interface has media support initialise it */
if (ne->init_media) {
dsc->sc_mediachange = ne->mediachange;
dsc->sc_mediastatus = ne->mediastatus;
dsc->init_card = ne->init_card;
dsc->sc_media_init = ne->init_media;
#if 0
int *media = NULL, nmedia = 0, defmedia = 0;
ne->init_media(dsc, &media, &nmedia, &defmedia);
#endif
}
/*
* Do generic NE2000 attach. This will read the station address
* from the EEPROM.
*/
ne2000_attach(nsc, myea);
aprint_normal_dev(self, "");
switch (nsc->sc_type) {
case NE2000_TYPE_NE1000:
aprint_normal("NE1000");
break;
case NE2000_TYPE_NE2000:
aprint_normal("NE2000");
break;
case NE2000_TYPE_AX88190:
aprint_normal("AX88190");
break;
case NE2000_TYPE_DL10019:
aprint_normal("DL10019");
break;
case NE2000_TYPE_DL10022:
aprint_normal("DL10022");
break;
default:
printf("??");
};
aprint_normal(" chipset, %d Kb memory\n", dsc->mem_start/1024);
/* Does the interface need a postattach call ? */
if (ne->postattach)
ne->postattach(npsc);
/* Install an interrupt handler */
evcnt_attach_dynamic(&npsc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
device_xname(self), "intr");
npsc->sc_ih = podulebus_irq_establish(pa->pa_ih, IPL_NET, dp8390_intr,
dsc, &npsc->sc_intrcnt);
if (npsc->sc_ih == NULL)
panic("%s: Cannot install interrupt handler",
device_xname(self));
/* this feels wrong to do this here */
npsc->sc_ih->ih_maskaddr = npsc->sc_podule->irq_addr;
npsc->sc_ih->ih_maskbits = npsc->sc_podule->irq_mask;
}
