void otf_removeCell_task(void) {
open_addr_t neighbor;
bool foundNeighbor;
// get preferred parent
foundNeighbor = neighbors_getPreferredParentEui64(&neighbor);
if (foundNeighbor==FALSE) {
return;
}
// call sixtop
sixtop_removeCell(
&neighbor
);
}
/**
\brief Retrieve the next hop's address from routing table.
\param[in] destination128b Final IPv6 destination address.
\param[out] addressToWrite64b Location to write the EUI64 of next hop to.
*/
void forwarding_getNextHop(OpenMote* self, open_addr_t* destination128b, open_addr_t* addressToWrite64b) {
uint8_t i;
open_addr_t temp_prefix64btoWrite;
if ( packetfunctions_isBroadcastMulticast(self, destination128b)) {
// IP destination is broadcast, send to 0xffffffffffffffff
addressToWrite64b->type = ADDR_64B;
for (i=0;i<8;i++) {
addressToWrite64b->addr_64b[i] = 0xff;
}
} else if ( neighbors_isStableNeighbor(self, destination128b)) {
// IP destination is 1-hop neighbor, send directly
packetfunctions_ip128bToMac64b(self, destination128b,&temp_prefix64btoWrite,addressToWrite64b);
} else {
// destination is remote, send to preferred parent
neighbors_getPreferredParentEui64(self, addressToWrite64b);
}
}
/**
\brief Prepare and a send a RPL DAO.
*/
void sendDAO() {
OpenQueueEntry_t* msg; // pointer to DAO messages
uint8_t nbrIdx; // running neighbor index
uint8_t numTransitParents,numTargetParents; // the number of parents indicated in transit option
open_addr_t address;
open_addr_t* prefix;
if (ieee154e_isSynch()==FALSE) {
// I'm not sync'ed
// delete packets genereted by this module (DIO and DAO) from openqueue
openqueue_removeAllCreatedBy(COMPONENT_ICMPv6RPL);
// I'm not busy sending a DIO/DAO
icmpv6rpl_vars.busySending = FALSE;
// stop here
return;
}
// dont' send a DAO if you're in bridge mode
if (idmanager_getIsBridge()==TRUE) {
return;
}
// dont' send a DAO if you did not acquire a DAGrank
if (neighbors_getMyDAGrank()==DEFAULTDAGRANK) {
return;
}
// dont' send a DAO if you're still busy sending the previous one
if (icmpv6rpl_vars.busySending==TRUE) {
return;
}
// if you get here, you start construct DAO
// reserve a free packet buffer for DAO
msg = openqueue_getFreePacketBuffer(COMPONENT_ICMPv6RPL);
if (msg==NULL) {
openserial_printError(COMPONENT_ICMPv6RPL,ERR_NO_FREE_PACKET_BUFFER,
(errorparameter_t)0,
(errorparameter_t)0);
return;
}
// take ownership
msg->creator = COMPONENT_ICMPv6RPL;
msg->owner = COMPONENT_ICMPv6RPL;
// set transport information
msg->l4_protocol = IANA_ICMPv6;
msg->l4_sourcePortORicmpv6Type = IANA_ICMPv6_RPL;
// set DAO destination
msg->l3_destinationAdd.type=ADDR_128B;
memcpy(msg->l3_destinationAdd.addr_128b,icmpv6rpl_vars.dio.DODAGID,sizeof(icmpv6rpl_vars.dio.DODAGID));
//===== fill in packet
//NOTE: limit to preferrred parent only the number of DAO transit addresses to send
//=== transit option -- from RFC 6550, page 55 - 1 transit information header per parent is required.
//getting only preferred parent as transit
numTransitParents=0;
neighbors_getPreferredParentEui64(&address);
packetfunctions_writeAddress(msg,&address,OW_BIG_ENDIAN);
prefix=idmanager_getMyID(ADDR_PREFIX);
packetfunctions_writeAddress(msg,prefix,OW_BIG_ENDIAN);
// update transit info fields
// from rfc6550 p.55 -- Variable, depending on whether or not the DODAG ParentAddress subfield is present.
// poipoi xv: it is not very clear if this includes all fields in the header. or as target info 2 bytes are removed.
// using the same pattern as in target information.
icmpv6rpl_vars.dao_transit.optionLength = LENGTH_ADDR128b + sizeof(icmpv6rpl_dao_transit_ht)-2;
icmpv6rpl_vars.dao_transit.PathControl=0; //todo. this is to set the preference of this parent.
icmpv6rpl_vars.dao_transit.type=OPTION_TRANSIT_INFORMATION_TYPE;
// write transit info in packet
packetfunctions_reserveHeaderSize(msg,sizeof(icmpv6rpl_dao_transit_ht));
memcpy(
((icmpv6rpl_dao_transit_ht*)(msg->payload)),
&(icmpv6rpl_vars.dao_transit),
sizeof(icmpv6rpl_dao_transit_ht)
);
numTransitParents++;
//target information is required. RFC 6550 page 55.
/*
One or more Transit Information options MUST be preceded by one or
more RPL Target options.
*/
numTargetParents = 0;
for (nbrIdx=0;nbrIdx<MAXNUMNEIGHBORS;nbrIdx++) {
if ((neighbors_isNeighborWithHigherDAGrank(nbrIdx))==TRUE) {
// this neighbor is of higher DAGrank as I am. so it is my child
// write it's address in DAO RFC6550 page 80 check point 1.
neighbors_getNeighbor(&address,ADDR_64B,nbrIdx);
packetfunctions_writeAddress(msg,&address,OW_BIG_ENDIAN);
prefix=idmanager_getMyID(ADDR_PREFIX);
packetfunctions_writeAddress(msg,prefix,OW_BIG_ENDIAN);
// update target info fields
// from rfc6550 p.55 -- Variable, length of the option in octets excluding the Type and Length fields.
// poipoi xv: assuming that type and length fields refer to the 2 first bytes of the header
icmpv6rpl_vars.dao_target.optionLength = LENGTH_ADDR128b +sizeof(icmpv6rpl_dao_target_ht) - 2; //no header type and length
icmpv6rpl_vars.dao_target.type = OPTION_TARGET_INFORMATION_TYPE;
icmpv6rpl_vars.dao_target.flags = 0; //must be 0
icmpv6rpl_vars.dao_target.prefixLength = 128; //128 leading bits -- full address.
// write transit info in packet
packetfunctions_reserveHeaderSize(msg,sizeof(icmpv6rpl_dao_target_ht));
memcpy(
((icmpv6rpl_dao_target_ht*)(msg->payload)),
&(icmpv6rpl_vars.dao_target),
sizeof(icmpv6rpl_dao_target_ht)
);
// remember I found it
numTargetParents++;
}
//limit to MAX_TARGET_PARENTS the number of DAO target addresses to send
//section 8.2.1 pag 67 RFC6550 -- using a subset
// poipoi TODO base selection on ETX rather than first X.
if (numTargetParents>=MAX_TARGET_PARENTS) break;
}
// stop here if no parents found
if (numTransitParents==0) {
openqueue_freePacketBuffer(msg);
return;
}
icmpv6rpl_vars.dao_transit.PathSequence++; //increment path sequence.
// if you get here, you will send a DAO
//=== DAO header
packetfunctions_reserveHeaderSize(msg,sizeof(icmpv6rpl_dao_ht));
memcpy(
((icmpv6rpl_dao_ht*)(msg->payload)),
&(icmpv6rpl_vars.dao),
sizeof(icmpv6rpl_dao_ht)
);
//=== ICMPv6 header
packetfunctions_reserveHeaderSize(msg,sizeof(ICMPv6_ht));
((ICMPv6_ht*)(msg->payload))->type = msg->l4_sourcePortORicmpv6Type;
((ICMPv6_ht*)(msg->payload))->code = IANA_ICMPv6_RPL_DAO;
packetfunctions_calculateChecksum(msg,(uint8_t*)&(((ICMPv6_ht*)(msg->payload))->checksum)); //call last
//===== send
if (icmpv6_send(msg)==E_SUCCESS) {
icmpv6rpl_vars.busySending = TRUE;
} else {
openqueue_freePacketBuffer(msg);
}
}
