static int suspend(bool do_deepsleep)
{
bool pins_force = pins_suspend_force_mux && pins_suspend_force;
int ret = 0;
u32 pending_irq;
if (suspend_sleep_is_blocked()) {
pr_info("suspend/resume: interrupted by modem.\n");
return -EBUSY;
}
if (has_wake_lock(WAKE_LOCK_SUSPEND)) {
pr_info("suspend/resume: aborted. wakelock has been taken.\n");
return -EBUSY;
}
nmk_gpio_clocks_enable();
ux500_suspend_dbg_add_wake_on_uart();
nmk_gpio_wakeups_suspend();
/* configure the prcm for a sleep wakeup */
prcmu_enable_wakeups(suspend_wakeups);
ux500_suspend_dbg_test_set_wakeup();
context_vape_save();
if (pins_force) {
/*
* Save GPIO settings before applying power save
* settings
*/
context_gpio_save();
/* Apply GPIO power save mux settings */
context_gpio_mux_safe_switch(true);
pins_suspend_force_mux();
context_gpio_mux_safe_switch(false);
/* Apply GPIO power save settings */
pins_suspend_force();
}
ux500_pm_gic_decouple();
/* Copy GIC interrupt settings to PRCMU interrupt settings */
ux500_pm_prcmu_copy_gic_settings();
if (ux500_pm_gic_pending_interrupt()) {
pr_info("suspend/resume: pending interrupt gic\n");
/* Recouple GIC with the interrupt bus */
ux500_pm_gic_recouple();
ret = -EBUSY;
goto exit;
}
if (ux500_pm_prcmu_pending_interrupt(&pending_irq)) {
pr_info("suspend/resume: pending interrupt prcmu: %u\n",
pending_irq);
/* Recouple GIC with the interrupt bus */
ux500_pm_gic_recouple();
ret = -EBUSY;
goto exit;
}
ux500_pm_prcmu_set_ioforce(true);
if (do_deepsleep) {
context_varm_save_common();
context_varm_save_core();
context_gic_dist_disable_unneeded_irqs();
context_save_cpu_registers();
/*
* Due to we have only 100us between requesting a powerstate
* and wfi, we clean the cache before as well to assure the
* final cache clean before wfi has as little as possible to
* do.
*/
context_clean_l1_cache_all();
(void) prcmu_set_power_state(PRCMU_AP_DEEP_SLEEP,
false, false);
context_save_to_sram_and_wfi(true);
context_restore_cpu_registers();
context_varm_restore_core();
context_varm_restore_common();
} else {
context_clean_l1_cache_all();
(void) prcmu_set_power_state(PRCMU_AP_SLEEP,
false, false);
dsb();
__asm__ __volatile__("wfi\n\t" : : : "memory");
}
context_vape_restore();
/* If GPIO woke us up then save the pins that caused the wake up */
ux500_pm_gpio_save_wake_up_status();
ux500_suspend_dbg_sleep_status(do_deepsleep);
/* APE was turned off, restore IO ring */
ux500_pm_prcmu_set_ioforce(false);
exit:
if (pins_force) {
/* Restore gpio settings */
context_gpio_mux_safe_switch(true);
context_gpio_restore_mux();
context_gpio_mux_safe_switch(false);
context_gpio_restore();
}
/* Configure the prcmu with the wake-ups that cpuidle needs */
prcmu_enable_wakeups(running_wakeups);
nmk_gpio_wakeups_resume();
ux500_suspend_dbg_remove_wake_on_uart();
nmk_gpio_clocks_disable();
return ret;
}
static int suspend(bool do_deepsleep)
{
bool pins_force = pins_suspend_force_mux && pins_suspend_force;
int ret = 0;
if (sleep_is_blocked()) {
pr_info("suspend/resume: interrupted by modem(%d) or event(%d)\n",
atomic_read(&block_sleep_modem),
atomic_read(&block_sleep_event));
return -EBUSY;
}
if (has_wake_lock(WAKE_LOCK_SUSPEND)) {
pr_info("suspend/resume: wakelock has been locked!\n");
return -EBUSY;
}
nmk_gpio_clocks_enable();
ux500_suspend_dbg_add_wake_on_uart();
nmk_gpio_wakeups_suspend();
/* configure the prcm for a sleep wakeup */
prcmu_enable_wakeups(PRCMU_WAKEUP(ABB) | PRCMU_WAKEUP(RTC));
ux500_rtcrtt_next_seconds(alarm_sec);
context_vape_save();
if (pins_force) {
/*
* Save GPIO settings before applying power save
* settings
*/
context_gpio_save();
/* Apply GPIO power save mux settings */
context_gpio_mux_safe_switch(true);
pins_suspend_force_mux();
context_gpio_mux_safe_switch(false);
/* Apply GPIO power save settings */
pins_suspend_force();
}
ux500_pm_gic_decouple();
if (ux500_pm_gic_pending_interrupt()) {
pr_info("suspend/resume: pending interrupt\n");
/* Recouple GIC with the interrupt bus */
ux500_pm_gic_recouple();
ret = -EBUSY;
goto exit;
}
ux500_pm_prcmu_set_ioforce(true);
if (do_deepsleep) {
context_varm_save_common();
context_varm_save_core();
context_gic_dist_disable_unneeded_irqs();
context_save_cpu_registers();
/*
* Due to we have only 100us between requesting a powerstate
* and wfi, we clean the cache before as well to assure the
* final cache clean before wfi has as little as possible to
* do.
*/
context_clean_l1_cache_all();
(void) prcmu_set_power_state(PRCMU_AP_DEEP_SLEEP,
false, false);
context_save_to_sram_and_wfi(true);
context_restore_cpu_registers();
context_varm_restore_core();
context_varm_restore_common();
} else {
context_clean_l1_cache_all();
(void) prcmu_set_power_state(APEXECUTE_TO_APSLEEP,
false, false);
dsb();
__asm__ __volatile__("wfi\n\t" : : : "memory");
}
context_vape_restore();
/* If GPIO woke us up then save the pins that caused the wake up */
ux500_pm_gpio_save_wake_up_status();
ux500_suspend_dbg_sleep_status(do_deepsleep);
/* APE was turned off, restore IO ring */
ux500_pm_prcmu_set_ioforce(false);
exit:
if (pins_force) {
/* Restore gpio settings */
context_gpio_mux_safe_switch(true);
context_gpio_restore_mux();
context_gpio_mux_safe_switch(false);
context_gpio_restore();
}
ux500_rtcrtt_off();
/* This is what cpuidle wants */
prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
PRCMU_WAKEUP(ABB));
nmk_gpio_wakeups_resume();
ux500_suspend_dbg_remove_wake_on_uart();
nmk_gpio_clocks_disable();
return ret;
}