void nrf_802154_hp_timer_start(void)
{
#if !RAAL_SOFTDEVICE && !RAAL_SIMULATOR
nrf_timer_mode_set(TIMER, NRF_TIMER_MODE_TIMER);
nrf_timer_bit_width_set(TIMER, NRF_TIMER_BIT_WIDTH_32);
nrf_timer_frequency_set(TIMER, NRF_TIMER_FREQ_1MHz);
nrf_timer_task_trigger(TIMER, NRF_TIMER_TASK_START);
#endif // !RAAL_SOFTDEVICE && !RAAL_SIMULATOR
}
void jshInit() {
jshInitDevices();
nrf_utils_lfclk_config_and_start();
BITFIELD_CLEAR(jshPinSoftPWM);
JshUSARTInfo inf;
jshUSARTInitInfo(&inf);
inf.pinRX = DEFAULT_CONSOLE_RX_PIN;
inf.pinTX = DEFAULT_CONSOLE_TX_PIN;
inf.baudRate = DEFAULT_CONSOLE_BAUDRATE;
jshUSARTSetup(EV_SERIAL1, &inf); // Initialize UART for communication with Espruino/terminal.
init = 1;
// Enable and sort out the timer
nrf_timer_mode_set(NRF_TIMER1,NRF_TIMER_MODE_TIMER);
nrf_timer_bit_width_set(NRF_TIMER1, NRF_TIMER_BIT_WIDTH_32);
nrf_timer_frequency_set(NRF_TIMER1, NRF_TIMER_FREQ_1MHz); // hmm = only a few options here
// Irq setup
NVIC_SetPriority(TIMER1_IRQn, 3); // low - don't mess with BLE :)
NVIC_ClearPendingIRQ(TIMER1_IRQn);
NVIC_EnableIRQ(TIMER1_IRQn);
nrf_timer_int_enable(NRF_TIMER1, NRF_TIMER_INT_COMPARE0_MASK );
// Pin change
nrf_drv_gpiote_init();
jswrap_nrf_bluetooth_init();
}
ret_code_t nrf_drv_timer_init(nrf_drv_timer_t const * const p_instance,
nrf_drv_timer_config_t const * p_config,
nrf_timer_event_handler_t timer_event_handler)
{
timer_control_block_t * p_cb = &m_cb[p_instance->instance_id];
#ifdef SOFTDEVICE_PRESENT
ASSERT(p_instance->p_reg != NRF_TIMER0);
ASSERT(p_config);
#endif
if (p_cb->state != NRF_DRV_STATE_UNINITIALIZED)
{
return NRF_ERROR_INVALID_STATE;
}
if (timer_event_handler == NULL)
{
return NRF_ERROR_INVALID_PARAM;
}
/* Warning 685: Relational operator '<=' always evaluates to 'true'"
* Warning in NRF_TIMER_IS_BIT_WIDTH_VALID macro. Macro validate timers resolution.
* Not necessary in nRF52 based systems. Obligatory in nRF51 based systems.
*/
/*lint -save -e685 */
ASSERT(NRF_TIMER_IS_BIT_WIDTH_VALID(p_instance->p_reg, p_config->bit_width));
//lint -restore
p_cb->handler = timer_event_handler;
p_cb->context = p_config->p_context;
uint8_t i;
for (i = 0; i < p_instance->cc_channel_count; ++i)
{
nrf_timer_event_clear(p_instance->p_reg,
nrf_timer_compare_event_get(i));
}
nrf_drv_common_irq_enable(nrf_drv_get_IRQn(p_instance->p_reg),
p_config->interrupt_priority);
nrf_timer_mode_set(p_instance->p_reg, p_config->mode);
nrf_timer_bit_width_set(p_instance->p_reg, p_config->bit_width);
nrf_timer_frequency_set(p_instance->p_reg, p_config->frequency);
p_cb->state = NRF_DRV_STATE_INITIALIZED;
return NRF_SUCCESS;
}
ret_code_t nrf_drv_timer_init(nrf_drv_timer_t const * const p_instance,
nrf_drv_timer_config_t const * p_config,
nrf_timer_event_handler_t timer_event_handler)
{
timer_control_block_t * p_cb = &m_cb[p_instance->instance_id];
#ifdef SOFTDEVICE_PRESENT
ASSERT(p_instance->p_reg != NRF_TIMER0);
#endif
ASSERT(NRF_TIMER_IS_BIT_WIDTH_VALID(p_instance->p_reg, p_config->bit_width));
if (p_cb->state != NRF_DRV_STATE_UNINITIALIZED)
{
return NRF_ERROR_INVALID_STATE;
}
if (timer_event_handler == NULL)
{
return NRF_ERROR_INVALID_PARAM;
}
if (p_config == NULL)
{
p_config = &m_default_config[p_instance->instance_id];
}
p_cb->handler = timer_event_handler;
p_cb->context = p_config->p_context;
uint8_t i;
for (i = 0; i < p_instance->cc_channel_count; ++i)
{
nrf_timer_event_clear(p_instance->p_reg,
nrf_timer_compare_event_get(i));
}
nrf_drv_common_irq_enable(nrf_drv_get_IRQn(p_instance->p_reg),
p_config->interrupt_priority);
nrf_timer_mode_set(p_instance->p_reg, p_config->mode);
nrf_timer_bit_width_set(p_instance->p_reg, p_config->bit_width);
nrf_timer_frequency_set(p_instance->p_reg, p_config->frequency);
p_cb->state = NRF_DRV_STATE_INITIALIZED;
return NRF_SUCCESS;
}
ret_code_t nrf_drv_timer_init(nrf_drv_timer_t const * const p_instance,
nrf_drv_timer_config_t const * p_config,
nrf_timer_event_handler_t timer_event_handler)
{
ASSERT((p_instance->instance_id) < TIMER_INSTANCE_NUMBER);
ASSERT(TIMER_IS_BIT_WIDTH_VALID(p_instance->instance_id, p_config->bit_width));
if (m_cb[p_instance->instance_id].state != NRF_DRV_STATE_UNINITIALIZED)
{
return NRF_ERROR_INVALID_STATE; // timer already initialized
}
if (p_config == NULL)
{
p_config = &m_default_config[p_instance->instance_id];
}
#ifdef SOFTDEVICE_PRESENT
if (p_instance->p_reg == NRF_TIMER0)
{
return NRF_ERROR_INVALID_PARAM;
}
#endif
nrf_drv_common_irq_enable(p_instance->irq, p_config->interrupt_priority);
if (timer_event_handler != NULL)
{
m_timer_event_handlers[p_instance->instance_id] = timer_event_handler;
}
else
{
return NRF_ERROR_INVALID_PARAM;
}
nrf_timer_mode_set(p_instance->p_reg, p_config->mode);
nrf_timer_bit_width_set(p_instance->p_reg, p_config->bit_width);
nrf_timer_frequency_set(p_instance->p_reg, p_config->frequency);
m_cb[p_instance->instance_id].state = NRF_DRV_STATE_INITIALIZED;
return NRF_SUCCESS;
}
void us_ticker_init(void)
{
if (us_ticker_initialized) {
nrf_timer_event_clear(NRF_TIMER1, NRF_TIMER_EVENT_COMPARE0);
nrf_timer_int_disable(NRF_TIMER1, nrf_timer_compare_int_get(NRF_TIMER_CC_CHANNEL0));
return;
}
nrf_timer_task_trigger(NRF_TIMER1, NRF_TIMER_TASK_STOP);
nrf_timer_int_disable(NRF_TIMER1, nrf_timer_compare_int_get(NRF_TIMER_CC_CHANNEL0));
/* Configure timer as follows:
* - timer mode,
* - timer width 16 bits for NRF51 and 32 bits for NRF52,
* - timer freq 1 MHz.
*/
nrf_timer_mode_set(NRF_TIMER1, NRF_TIMER_MODE_TIMER);
nrf_timer_frequency_set(NRF_TIMER1, NRF_TIMER_FREQ_1MHz);
#ifdef NRF52
nrf_timer_bit_width_set(NRF_TIMER1, NRF_TIMER_BIT_WIDTH_32);
#else
nrf_timer_bit_width_set(NRF_TIMER1, NRF_TIMER_BIT_WIDTH_16);
#endif
nrf_timer_cc_write(NRF_TIMER1, NRF_TIMER_CC_CHANNEL0, 0);
nrf_timer_event_clear(NRF_TIMER1, NRF_TIMER_EVENT_COMPARE0);
NVIC_SetVector(TIMER1_IRQn, (uint32_t)us_ticker_irq_handler);
nrf_drv_common_irq_enable(TIMER1_IRQn, APP_IRQ_PRIORITY_HIGH);
nrf_timer_task_trigger(NRF_TIMER1, NRF_TIMER_TASK_START);
/* Bug fix. First value can't be trusted. */
nrf_timer_task_trigger(NRF_TIMER1, NRF_TIMER_TASK_CAPTURE1);
us_ticker_initialized = true;
}
void jshInit() {
jshInitDevices();
nrf_utils_lfclk_config_and_start();
JshUSARTInfo inf; // Just for show, not actually used...
jshUSARTSetup(EV_SERIAL1, &inf); // Initialize UART for communication with Espruino/terminal.
init = 1;
// Enable and sort out the timer
nrf_timer_mode_set(NRF_TIMER1,NRF_TIMER_MODE_TIMER);
nrf_timer_bit_width_set(NRF_TIMER1, NRF_TIMER_BIT_WIDTH_32);
nrf_timer_frequency_set(NRF_TIMER1, NRF_TIMER_FREQ_1MHz); // hmm = only a few options here
// Irq setup
NVIC_SetPriority(TIMER1_IRQn, 15); // low - don't mess with BLE :)
NVIC_ClearPendingIRQ(TIMER1_IRQn);
NVIC_EnableIRQ(TIMER1_IRQn);
nrf_timer_int_enable(NRF_TIMER1, NRF_TIMER_INT_COMPARE0_MASK );
jswrap_nrf_bluetooth_init();
}
ret_code_t nrf_drv_timer_init(nrf_drv_timer_t const * const p_instance,
nrf_drv_timer_config_t const * p_config,
nrf_timer_event_handler_t timer_event_handler)
{
timer_control_block_t * p_cb = &m_cb[p_instance->instance_id];
ASSERT(((p_instance->p_reg == NRF_TIMER0) && TIMER0_ENABLED) || (p_instance->p_reg != NRF_TIMER0));
ASSERT(((p_instance->p_reg == NRF_TIMER1) && TIMER1_ENABLED) || (p_instance->p_reg != NRF_TIMER1));
ASSERT(((p_instance->p_reg == NRF_TIMER2) && TIMER2_ENABLED) || (p_instance->p_reg != NRF_TIMER2));
#if TIMER_COUNT == 5
ASSERT(((p_instance->p_reg == NRF_TIMER3) && TIMER3_ENABLED) || (p_instance->p_reg != NRF_TIMER3));
ASSERT(((p_instance->p_reg == NRF_TIMER4) && TIMER4_ENABLED) || (p_instance->p_reg != NRF_TIMER4));
#endif //TIMER_COUNT
#ifdef SOFTDEVICE_PRESENT
ASSERT(p_instance->p_reg != NRF_TIMER0);
ASSERT(p_config);
#endif
ret_code_t err_code;
if (p_cb->state != NRF_DRV_STATE_UNINITIALIZED)
{
err_code = NRF_ERROR_INVALID_STATE;
NRF_LOG_WARNING("Function: %s, error code: %s.\r\n", (uint32_t)__func__, (uint32_t)ERR_TO_STR(err_code));
return err_code;
}
if (timer_event_handler == NULL)
{
err_code = NRF_ERROR_INVALID_PARAM;
NRF_LOG_WARNING("Function: %s, error code: %s.\r\n", (uint32_t)__func__, (uint32_t)ERR_TO_STR(err_code));
return err_code;
}
/* Warning 685: Relational operator '<=' always evaluates to 'true'"
* Warning in NRF_TIMER_IS_BIT_WIDTH_VALID macro. Macro validate timers resolution.
* Not necessary in nRF52 based systems. Obligatory in nRF51 based systems.
*/
/*lint -save -e685 */
ASSERT(NRF_TIMER_IS_BIT_WIDTH_VALID(p_instance->p_reg, p_config->bit_width));
//lint -restore
p_cb->handler = timer_event_handler;
p_cb->context = p_config->p_context;
uint8_t i;
for (i = 0; i < p_instance->cc_channel_count; ++i)
{
nrf_timer_event_clear(p_instance->p_reg,
nrf_timer_compare_event_get(i));
}
nrf_drv_common_irq_enable(nrf_drv_get_IRQn(p_instance->p_reg),
p_config->interrupt_priority);
nrf_timer_mode_set(p_instance->p_reg, p_config->mode);
nrf_timer_bit_width_set(p_instance->p_reg, p_config->bit_width);
nrf_timer_frequency_set(p_instance->p_reg, p_config->frequency);
p_cb->state = NRF_DRV_STATE_INITIALIZED;
err_code = NRF_SUCCESS;
NRF_LOG_INFO("Function: %s, error code: %s.\r\n", (uint32_t)__func__, (uint32_t)ERR_TO_STR(err_code));
return err_code;
}
