C++ (Cpp) ntb_setup_legacy_interruptの例

コード例 #1

ファイル: ntb_hw.c プロジェクト: coderandy/freebsd

static int
ntb_setup_interrupts(struct ntb_softc *ntb)
{
	uint32_t desired_vectors, num_vectors;
	uint64_t mask;
	int rc;

	ntb->allocated_interrupts = 0;

	/*
	 * On SOC, disable all interrupts.  On XEON, disable all but Link
	 * Interrupt.  The rest will be unmasked as callbacks are registered.
	 */
	mask = 0;
	if (ntb->type == NTB_XEON)
		mask = (1 << XEON_LINK_DB);
	db_iowrite(ntb, ntb->reg_ofs.ldb_mask, ~mask);

	num_vectors = desired_vectors = MIN(pci_msix_count(ntb->device),
	    ntb->limits.max_db_bits);
	if (desired_vectors >= 1) {
		rc = pci_alloc_msix(ntb->device, &num_vectors);

		if (ntb_force_remap_mode != 0 && rc == 0 &&
		    num_vectors == desired_vectors)
			num_vectors--;

		if (rc == 0 && num_vectors < desired_vectors) {
			rc = ntb_remap_msix(ntb->device, desired_vectors,
			    num_vectors);
			if (rc == 0)
				num_vectors = desired_vectors;
			else
				pci_release_msi(ntb->device);
		}
		if (rc != 0)
			num_vectors = 1;
	} else
		num_vectors = 1;

	ntb_create_callbacks(ntb, num_vectors);

	if (ntb->type == NTB_XEON)
		rc = ntb_setup_xeon_msix(ntb, num_vectors);
	else
		rc = ntb_setup_soc_msix(ntb, num_vectors);
	if (rc != 0)
		device_printf(ntb->device,
		    "Error allocating MSI-X interrupts: %d\n", rc);

	if (ntb->type == NTB_XEON && rc == ENOSPC)
		rc = ntb_setup_legacy_interrupt(ntb);

	return (rc);
}

コード例 #2

ファイル: ntb_hw.c プロジェクト: Ricky54326/freebsd

static int
ntb_setup_interrupts(struct ntb_softc *ntb)
{
	uint32_t desired_vectors, num_vectors;
	uint64_t mask;
	int rc;

	ntb->allocated_interrupts = 0;

	/*
	 * On SOC, disable all interrupts.  On XEON, disable all but Link
	 * Interrupt.  The rest will be unmasked as callbacks are registered.
	 */
	mask = 0;
	if (ntb->type == NTB_XEON)
		mask = (1 << XEON_LINK_DB);
	db_iowrite(ntb, ntb->reg_ofs.ldb_mask, ~mask);

	num_vectors = desired_vectors = MIN(pci_msix_count(ntb->device),
	    ntb->limits.max_db_bits);
	if (desired_vectors >= 1) {
		rc = pci_alloc_msix(ntb->device, &num_vectors);

		if (ntb_force_remap_mode != 0 && rc == 0 &&
		    num_vectors == desired_vectors)
			num_vectors--;

		if (rc == 0 && num_vectors < desired_vectors) {
			rc = ntb_remap_msix(ntb->device, desired_vectors,
			    num_vectors);
			if (rc == 0)
				num_vectors = desired_vectors;
			else
				pci_release_msi(ntb->device);
		}
		if (rc != 0)
			num_vectors = 1;
	} else
		num_vectors = 1;

	/*
	 * If allocating MSI-X interrupts succeeds, limit callbacks to the
	 * number of MSI-X slots available.
	 */
	ntb_create_callbacks(ntb, num_vectors);

	if (ntb->type == NTB_XEON)
		rc = ntb_setup_xeon_msix(ntb, num_vectors);
	else
		rc = ntb_setup_soc_msix(ntb, num_vectors);
	if (rc != 0) {
		device_printf(ntb->device,
		    "Error allocating MSI-X interrupts: %d\n", rc);

		/*
		 * If allocating MSI-X interrupts failed and we're forced to
		 * use legacy INTx anyway, the only limit on individual
		 * callbacks is the number of doorbell bits.
		 *
		 * CEM: This seems odd to me but matches the behavior of the
		 * Linux driver ca. September 2013
		 */
		ntb_free_callbacks(ntb);
		ntb_create_callbacks(ntb, ntb->limits.max_db_bits);
	}

	if (ntb->type == NTB_XEON && rc == ENOSPC)
		rc = ntb_setup_legacy_interrupt(ntb);

	return (rc);
}