static void __init omap3_evm_init(void)
{
struct omap_board_mux *obm;
omap3_evm_get_revision();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
omap3_mux_init(obm, OMAP_PACKAGE_CBB);
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
omap3evm_twldata.vaux2 = &omap3evm_vaux2;
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
/* Select EHCI port on main board */
omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
OMAP_PIN_INPUT_PULLUP);
gpio_request_array(omap3_evm_ehci_gpios,
ARRAY_SIZE(omap3_evm_ehci_gpios));
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
usbhs_bdata.reset_gpio_port[1] = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
musb_board_data.extvbus = 1;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
usbhs_bdata.reset_gpio_port[1] = 135;
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions));
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
omap3_evm_wl12xx_init();
omap_twl4030_audio_init("omap3evm");
}
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
if (cpu_is_omap3630())
omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
else
omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
/* Select EHCI port on main board */
omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
OMAP_PIN_INPUT_PULLUP);
gpio_request_array(omap3_evm_ehci_gpios,
ARRAY_SIZE(omap3_evm_ehci_gpios));
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
usbhs_bdata.reset_gpio_port[1] = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
musb_board_data.extvbus = 1;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
usbhs_bdata.reset_gpio_port[1] = 135;
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
#ifdef CONFIG_WL12XX_PLATFORM_DATA
/* WL12xx WLAN Init */
if (wl12xx_set_platform_data(&omap3evm_wlan_data))
pr_err("error setting wl12xx data\n");
platform_device_register(&omap3evm_wlan_regulator);
#endif
}
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
omap3evm_twldata.vaux2 = &omap3evm_vaux2;
else
omap3evm_twldata.vusb = &omap3_evm_vusb;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
ehci_pdata.reset_gpio_port[1] = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
musb_board_data.extvbus = 1;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
omap3_evm_display_init();
}
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
#ifdef CONFIG_NOP_USB_XCEIV
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
#endif
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
ehci_pdata.reset_gpio_port[1] = 21;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
/* MDC also need VUSB1V5 regulator */
ehci_pdata.aux[1] = 1;
}
usb_musb_init();
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
}
static void __init omap3_evm_init(void)
{
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
#ifdef CONFIG_NOP_USB_XCEIV
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
#endif
usb_musb_init();
ads7846_dev_init();
}
