C++ (Cpp) omap4_panda_i2c_initの例

コード例 #1

ファイル: board-omap4panda.c プロジェクト: AceKatz/networking_research

static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int ret;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
	if (ret)
		pr_err("error setting wl12xx data: %d\n", ret);

	omap4_panda_init_rev();
	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
}

コード例 #2

ファイル: board-omap4panda.c プロジェクト: 0rt/mpokang_kernel

static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	omap_emif_setup_device_details(&emif_devices, &emif_devices);

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
		pr_err("error setting wl12xx data\n");

	omap4_panda_i2c_init();
	omap4_audio_conf();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
/*
 * 	This is temporaray. With WLAN regsitering, we see that UART2 is not
 * 	idling on panda and CORE RET is not happening. So removing this FTM.
 * 	Later will be enabled.
 *
 *	platform_device_register(&omap_vwlan_device);
 */
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);

	omap_dmm_init();
	omap4_panda_display_init();
}

コード例 #3

ファイル: board-omap4panda.c プロジェクト: alessandroste/testBSP

static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int ret;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;

	omap_emif_set_device_details(1, &lpddr2_elpida_2G_S4_x2_info,
			lpddr2_elpida_2G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap_emif_set_device_details(2, &lpddr2_elpida_2G_S4_x2_info,
			lpddr2_elpida_2G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	if (cpu_is_omap446x())
		gpio_leds[0].gpio = 110;

	omap4_mux_init(board_mux, NULL, package);

	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);

	omap_register_mac_device_fixup_paths(panda_fixup_mac_device_paths,
				     ARRAY_SIZE(panda_fixup_mac_device_paths));

	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
	if (ret)
		pr_err("error setting wl12xx data: %d\n", ret);

	omap4_panda_init_rev();
	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
#ifdef CONFIG_MACH_OMAP4_PANDA_CAMERA_SUPPORT
	panda_camera_init(&panda_camera_board_info);
#endif
	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		ret = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
				OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (ret)
			pr_err("TPS62361 initialization failed: %d\n", ret);
	}
	omap_enable_smartreflex_on_init();
}

コード例 #4

ファイル: board-omap4panda.c プロジェクト: 15-712/linux-2.6

static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, package);

	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
}

コード例 #5

ファイル: board-omap4panda.c プロジェクト: 007kumarraja/rockchip-rk3188-mk908

static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
		pr_err("error setting wl12xx data\n");

	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
}