static void __mbox_rx_interrupt(struct omap_mbox *mbox)
{
struct omap_mbox_queue *mq = mbox->rxq;
mbox_msg_t msg;
int len;
while (!mbox_fifo_empty(mbox)) {
if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
omap_mbox_disable_irq(mbox, IRQ_RX);
mq->full = true;
goto nomem;
}
msg = mbox_fifo_read(mbox);
len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
WARN_ON(len != sizeof(msg));
if (mbox->ops->type == OMAP_MBOX_TYPE1)
break;
}
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
schedule_work(&mbox->rxq->work);
}
static void __mbox_rx_interrupt(struct omap_mbox *mbox)
{
struct omap_mbox_queue *mq = mbox->rxq;
mbox_msg_t msg;
int len;
while (!mbox_fifo_empty(mbox)) {
if (unlikely(__kfifo_len(mq->fifo) >=
FIFO_SIZE - sizeof(msg))) {
omap_mbox_disable_irq(mbox, IRQ_RX);
rq_full = true;
goto nomem;
}
msg = mbox_fifo_read(mbox);
len = __kfifo_put(mq->fifo, (unsigned char *)&msg, sizeof(msg));
if (unlikely(len != sizeof(msg)))
pr_err("%s: __kfifo_put anomaly detected\n", __func__);
if (mbox->ops->type == OMAP_MBOX_TYPE1)
break;
}
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
queue_work(mboxd, &mbox->rxq->work);
}
static int am33xx_pm_begin(suspend_state_t state)
{
int ret = 0;
int state_id = 0;
disable_hlt();
switch (state) {
case PM_SUSPEND_STANDBY:
state_id = 0xb;
break;
case PM_SUSPEND_MEM:
state_id = 0x3;
break;
}
/*
* Populate the resume address as part of IPC data
* The offset to be added comes from sleep33xx.S
* Add 4 bytes to ensure that resume happens from
* the word *after* the word which holds the resume offset
*/
am33xx_lp_ipc.resume_addr = (DS_RESUME_BASE + am33xx_resume_offset + 4);
am33xx_lp_ipc.sleep_mode = state_id;
am33xx_lp_ipc.ipc_data1 = DS_IPC_DEFAULT;
am33xx_lp_ipc.ipc_data2 = DS_IPC_DEFAULT;
am33xx_ipc_cmd(&am33xx_lp_ipc);
m3_state = M3_STATE_MSG_FOR_LP;
omap_mbox_enable_irq(m3_mbox, IRQ_RX);
ret = omap_mbox_msg_send(m3_mbox, 0xABCDABCD);
if (ret) {
pr_err("A8<->CM3 MSG for LP failed\n");
am33xx_m3_state_machine_reset();
ret = -1;
}
if (!wait_for_completion_timeout(&a8_m3_sync, msecs_to_jiffies(5000))) {
pr_err("A8<->CM3 sync failure\n");
am33xx_m3_state_machine_reset();
ret = -1;
} else {
pr_debug("Message sent for entering %s\n",
(DS_MODE == DS0_ID ? "DS0" : "DS1"));
omap_mbox_disable_irq(m3_mbox, IRQ_RX);
}
suspend_state = state;
return ret;
}
static void omap_mbox_fini(struct omap_mbox *mbox)
{
mutex_lock(&mbox_configured_lock);
if (!--mbox->use_count) {
omap_mbox_disable_irq(mbox, IRQ_RX);
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
flush_work(&mbox->rxq->work);
mbox_queue_free(mbox->txq);
mbox_queue_free(mbox->rxq);
}
if (likely(mbox->ops->shutdown)) {
if (!--mbox_configured)
mbox->ops->shutdown(mbox);
}
mutex_unlock(&mbox_configured_lock);
}
static int am33xx_pm_begin(suspend_state_t state)
{
int ret = 0;
disable_hlt();
am33xx_lp_ipc.resume_addr = DS_RESUME_ADDR;
am33xx_lp_ipc.sleep_mode = DS_MODE;
am33xx_lp_ipc.ipc_data1 = DS_IPC_DEFAULT;
am33xx_lp_ipc.ipc_data2 = DS_IPC_DEFAULT;
am33xx_ipc_cmd(&am33xx_lp_ipc);
m3_state = M3_STATE_MSG_FOR_LP;
omap_mbox_enable_irq(m3_mbox, IRQ_RX);
ret = omap_mbox_msg_send(m3_mbox, 0xABCDABCD);
if (ret) {
pr_err("A8<->CM3 MSG for LP failed\n");
am33xx_m3_state_machine_reset();
ret = -1;
}
if (!wait_for_completion_timeout(&a8_m3_sync, msecs_to_jiffies(5000))) {
pr_err("A8<->CM3 sync failure\n");
am33xx_m3_state_machine_reset();
ret = -1;
} else {
pr_debug("Message sent for entering %s\n",
(DS_MODE == DS0_ID ? "DS0" : "DS1"));
omap_mbox_disable_irq(m3_mbox, IRQ_RX);
}
suspend_state = state;
return ret;
}
/*
* ======== bridge_chnl_add_io_req ========
* Enqueue an I/O request for data transfer on a channel to the DSP.
* The direction (mode) is specified in the channel object. Note the DSP
* address is specified for channels opened in direct I/O mode.
*/
int bridge_chnl_add_io_req(struct chnl_object *chnl_obj, void *pHostBuf,
u32 byte_size, u32 buf_size,
OPTIONAL u32 dw_dsp_addr, u32 dw_arg)
{
int status = 0;
struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
struct chnl_irp *chnl_packet_obj = NULL;
struct wmd_dev_context *dev_ctxt;
struct dev_object *dev_obj;
u8 dw_state;
bool is_eos;
struct chnl_mgr *chnl_mgr_obj;
u8 *host_sys_buf = NULL;
bool sched_dpc = false;
u16 mb_val = 0;
is_eos = (byte_size == 0);
/* Validate args: */
if (pHostBuf == NULL) {
status = -EFAULT;
} else if (!pchnl) {
status = -EFAULT;
} else if (is_eos && CHNL_IS_INPUT(pchnl->chnl_mode)) {
status = -EPERM;
} else {
/* Check the channel state: only queue chirp if channel state
* allows */
dw_state = pchnl->dw_state;
if (dw_state != CHNL_STATEREADY) {
if (dw_state & CHNL_STATECANCEL)
status = -ECANCELED;
else if ((dw_state & CHNL_STATEEOS)
&& CHNL_IS_OUTPUT(pchnl->chnl_mode))
status = -EPIPE;
else
/* No other possible states left: */
DBC_ASSERT(0);
}
}
if (DSP_FAILED(status))
goto func_end;
chnl_mgr_obj = pchnl->chnl_mgr_obj;
dev_obj = dev_get_first();
dev_get_wmd_context(dev_obj, &dev_ctxt);
if (!dev_ctxt || !chnl_mgr_obj)
status = -EFAULT;
if (DSP_FAILED(status))
goto func_end;
if (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1 && pHostBuf) {
if (!(pHostBuf < (void *)USERMODE_ADDR)) {
host_sys_buf = pHostBuf;
goto func_cont;
}
/* if addr in user mode, then copy to kernel space */
host_sys_buf = kmalloc(buf_size, GFP_KERNEL);
if (host_sys_buf == NULL) {
status = -ENOMEM;
goto func_end;
}
if (CHNL_IS_OUTPUT(pchnl->chnl_mode)) {
status = copy_from_user(host_sys_buf, pHostBuf,
buf_size);
if (status) {
kfree(host_sys_buf);
host_sys_buf = NULL;
status = -EFAULT;
goto func_end;
}
}
}
func_cont:
/* Mailbox IRQ is disabled to avoid race condition with DMA/ZCPY
* channels. DPCCS is held to avoid race conditions with PCPY channels.
* If DPC is scheduled in process context (iosm_schedule) and any
* non-mailbox interrupt occurs, that DPC will run and break CS. Hence
* we disable ALL DPCs. We will try to disable ONLY IO DPC later. */
spin_lock_bh(&chnl_mgr_obj->chnl_mgr_lock);
omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
if (pchnl->chnl_type == CHNL_PCPY) {
/* This is a processor-copy channel. */
if (DSP_SUCCEEDED(status) && CHNL_IS_OUTPUT(pchnl->chnl_mode)) {
/* Check buffer size on output channels for fit. */
if (byte_size >
io_buf_size(pchnl->chnl_mgr_obj->hio_mgr))
status = -EINVAL;
}
}
if (DSP_SUCCEEDED(status)) {
/* Get a free chirp: */
chnl_packet_obj =
(struct chnl_irp *)lst_get_head(pchnl->free_packets_list);
if (chnl_packet_obj == NULL)
status = -EIO;
}
if (DSP_SUCCEEDED(status)) {
/* Enqueue the chirp on the chnl's IORequest queue: */
chnl_packet_obj->host_user_buf = chnl_packet_obj->host_sys_buf =
pHostBuf;
if (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1)
chnl_packet_obj->host_sys_buf = host_sys_buf;
/*
* Note: for dma chans dw_dsp_addr contains dsp address
* of SM buffer.
*/
DBC_ASSERT(chnl_mgr_obj->word_size != 0);
/* DSP address */
chnl_packet_obj->dsp_tx_addr =
dw_dsp_addr / chnl_mgr_obj->word_size;
chnl_packet_obj->byte_size = byte_size;
chnl_packet_obj->buf_size = buf_size;
/* Only valid for output channel */
chnl_packet_obj->dw_arg = dw_arg;
chnl_packet_obj->status = (is_eos ? CHNL_IOCSTATEOS :
CHNL_IOCSTATCOMPLETE);
lst_put_tail(pchnl->pio_requests,
(struct list_head *)chnl_packet_obj);
pchnl->cio_reqs++;
DBC_ASSERT(pchnl->cio_reqs <= pchnl->chnl_packets);
/* If end of stream, update the channel state to prevent
* more IOR's: */
if (is_eos)
pchnl->dw_state |= CHNL_STATEEOS;
/* Legacy DSM Processor-Copy */
DBC_ASSERT(pchnl->chnl_type == CHNL_PCPY);
/* Request IO from the DSP */
io_request_chnl(chnl_mgr_obj->hio_mgr, pchnl,
(CHNL_IS_INPUT(pchnl->chnl_mode) ? IO_INPUT :
IO_OUTPUT), &mb_val);
sched_dpc = true;
}
omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
spin_unlock_bh(&chnl_mgr_obj->chnl_mgr_lock);
if (mb_val != 0)
io_intr_dsp2(chnl_mgr_obj->hio_mgr, mb_val);
/* Schedule a DPC, to do the actual data transfer: */
if (sched_dpc)
iosm_schedule(chnl_mgr_obj->hio_mgr);
func_end:
return status;
}
/*
* ======== bridge_chnl_get_ioc ========
* Optionally wait for I/O completion on a channel. Dequeue an I/O
* completion record, which contains information about the completed
* I/O request.
* Note: Ensures Channel Invariant (see notes above).
*/
int bridge_chnl_get_ioc(struct chnl_object *chnl_obj, u32 dwTimeOut,
OUT struct chnl_ioc *pIOC)
{
int status = 0;
struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
struct chnl_irp *chnl_packet_obj;
int stat_sync;
bool dequeue_ioc = true;
struct chnl_ioc ioc = { NULL, 0, 0, 0, 0 };
u8 *host_sys_buf = NULL;
struct wmd_dev_context *dev_ctxt;
struct dev_object *dev_obj;
/* Check args: */
if (pIOC == NULL) {
status = -EFAULT;
} else if (!pchnl) {
status = -EFAULT;
} else if (dwTimeOut == CHNL_IOCNOWAIT) {
if (LST_IS_EMPTY(pchnl->pio_completions))
status = -EREMOTEIO;
}
dev_obj = dev_get_first();
dev_get_wmd_context(dev_obj, &dev_ctxt);
if (!dev_ctxt)
status = -EFAULT;
if (DSP_FAILED(status))
goto func_end;
ioc.status = CHNL_IOCSTATCOMPLETE;
if (dwTimeOut !=
CHNL_IOCNOWAIT && LST_IS_EMPTY(pchnl->pio_completions)) {
if (dwTimeOut == CHNL_IOCINFINITE)
dwTimeOut = SYNC_INFINITE;
stat_sync = sync_wait_on_event(pchnl->sync_event, dwTimeOut);
if (stat_sync == -ETIME) {
/* No response from DSP */
ioc.status |= CHNL_IOCSTATTIMEOUT;
dequeue_ioc = false;
} else if (stat_sync == -EPERM) {
/* This can occur when the user mode thread is
* aborted (^C), or when _VWIN32_WaitSingleObject()
* fails due to unkown causes. */
/* Even though Wait failed, there may be something in
* the Q: */
if (LST_IS_EMPTY(pchnl->pio_completions)) {
ioc.status |= CHNL_IOCSTATCANCEL;
dequeue_ioc = false;
}
}
}
/* See comment in AddIOReq */
spin_lock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
if (dequeue_ioc) {
/* Dequeue IOC and set pIOC; */
DBC_ASSERT(!LST_IS_EMPTY(pchnl->pio_completions));
chnl_packet_obj =
(struct chnl_irp *)lst_get_head(pchnl->pio_completions);
/* Update pIOC from channel state and chirp: */
if (chnl_packet_obj) {
pchnl->cio_cs--;
/* If this is a zero-copy channel, then set IOC's pbuf
* to the DSP's address. This DSP address will get
* translated to user's virtual addr later. */
{
host_sys_buf = chnl_packet_obj->host_sys_buf;
ioc.pbuf = chnl_packet_obj->host_user_buf;
}
ioc.byte_size = chnl_packet_obj->byte_size;
ioc.buf_size = chnl_packet_obj->buf_size;
ioc.dw_arg = chnl_packet_obj->dw_arg;
ioc.status |= chnl_packet_obj->status;
/* Place the used chirp on the free list: */
lst_put_tail(pchnl->free_packets_list,
(struct list_head *)chnl_packet_obj);
} else {
ioc.pbuf = NULL;
ioc.byte_size = 0;
}
} else {
ioc.pbuf = NULL;
ioc.byte_size = 0;
ioc.dw_arg = 0;
ioc.buf_size = 0;
}
/* Ensure invariant: If any IOC's are queued for this channel... */
if (!LST_IS_EMPTY(pchnl->pio_completions)) {
/* Since DSPStream_Reclaim() does not take a timeout
* parameter, we pass the stream's timeout value to
* bridge_chnl_get_ioc. We cannot determine whether or not
* we have waited in User mode. Since the stream's timeout
* value may be non-zero, we still have to set the event.
* Therefore, this optimization is taken out.
*
* if (dwTimeOut == CHNL_IOCNOWAIT) {
* ... ensure event is set..
* sync_set_event(pchnl->sync_event);
* } */
sync_set_event(pchnl->sync_event);
} else {
/* else, if list is empty, ensure event is reset. */
sync_reset_event(pchnl->sync_event);
}
omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
spin_unlock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
if (dequeue_ioc
&& (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1)) {
if (!(ioc.pbuf < (void *)USERMODE_ADDR))
goto func_cont;
/* If the addr is in user mode, then copy it */
if (!host_sys_buf || !ioc.pbuf) {
status = -EFAULT;
goto func_cont;
}
if (!CHNL_IS_INPUT(pchnl->chnl_mode))
goto func_cont1;
/*host_user_buf */
status = copy_to_user(ioc.pbuf, host_sys_buf, ioc.byte_size);
if (status) {
if (current->flags & PF_EXITING)
status = 0;
}
if (status)
status = -EFAULT;
func_cont1:
kfree(host_sys_buf);
}
func_cont:
/* Update User's IOC block: */
*pIOC = ioc;
func_end:
return status;
}
/*
* Mailbox interrupt handler
*/
static void __mbox_tx_interrupt(struct omap_mbox *mbox)
{
omap_mbox_disable_irq(mbox, IRQ_TX);
ack_mbox_irq(mbox, IRQ_TX);
tasklet_schedule(&mbox->txq->tasklet);
}
/*
* ======== WMD_CHNL_AddIOReq ========
* Enqueue an I/O request for data transfer on a channel to the DSP.
* The direction (mode) is specified in the channel object. Note the DSP
* address is specified for channels opened in direct I/O mode.
*/
DSP_STATUS WMD_CHNL_AddIOReq(struct CHNL_OBJECT *hChnl, void *pHostBuf,
u32 cBytes, u32 cBufSize,
OPTIONAL u32 dwDspAddr, u32 dwArg)
{
DSP_STATUS status = DSP_SOK;
struct CHNL_OBJECT *pChnl = (struct CHNL_OBJECT *)hChnl;
struct CHNL_IRP *pChirp = NULL;
struct WMD_DEV_CONTEXT *dev_ctxt;
struct DEV_OBJECT *dev_obj;
u32 dwState;
bool fIsEOS;
struct CHNL_MGR *pChnlMgr = pChnl->pChnlMgr;
u8 *pHostSysBuf = NULL;
bool fSchedDPC = false;
u16 wMbVal = 0;
fIsEOS = (cBytes == 0);
/* Validate args: */
if (pHostBuf == NULL) {
status = DSP_EPOINTER;
} else if (!MEM_IsValidHandle(pChnl, CHNL_SIGNATURE)) {
status = DSP_EHANDLE;
} else if (fIsEOS && CHNL_IsInput(pChnl->uMode)) {
status = CHNL_E_NOEOS;
} else {
/* Check the channel state: only queue chirp if channel state
* allows */
dwState = pChnl->dwState;
if (dwState != CHNL_STATEREADY) {
if (dwState & CHNL_STATECANCEL)
status = CHNL_E_CANCELLED;
else if ((dwState & CHNL_STATEEOS)
&& CHNL_IsOutput(pChnl->uMode))
status = CHNL_E_EOS;
else
/* No other possible states left: */
DBC_Assert(0);
}
}
dev_obj = DEV_GetFirst();
DEV_GetWMDContext(dev_obj, &dev_ctxt);
if (!dev_ctxt)
status = DSP_EHANDLE;
if (DSP_FAILED(status))
goto func_end;
if (pChnl->uChnlType == CHNL_PCPY && pChnl->uId > 1 && pHostBuf) {
if (!(pHostBuf < (void *)USERMODE_ADDR)) {
pHostSysBuf = pHostBuf;
goto func_cont;
}
/* if addr in user mode, then copy to kernel space */
pHostSysBuf = MEM_Alloc(cBufSize, MEM_NONPAGED);
if (pHostSysBuf == NULL) {
status = DSP_EMEMORY;
goto func_end;
}
if (CHNL_IsOutput(pChnl->uMode)) {
status = copy_from_user(pHostSysBuf, pHostBuf,
cBufSize);
if (status) {
kfree(pHostSysBuf);
pHostSysBuf = NULL;
status = DSP_EPOINTER;
goto func_end;
}
}
}
func_cont:
/* Mailbox IRQ is disabled to avoid race condition with DMA/ZCPY
* channels. DPCCS is held to avoid race conditions with PCPY channels.
* If DPC is scheduled in process context (IO_Schedule) and any
* non-mailbox interrupt occurs, that DPC will run and break CS. Hence
* we disable ALL DPCs. We will try to disable ONLY IO DPC later. */
SYNC_EnterCS(pChnlMgr->hCSObj);
omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
if (pChnl->uChnlType == CHNL_PCPY) {
/* This is a processor-copy channel. */
if (DSP_SUCCEEDED(status) && CHNL_IsOutput(pChnl->uMode)) {
/* Check buffer size on output channels for fit. */
if (cBytes > IO_BufSize(pChnl->pChnlMgr->hIOMgr))
status = CHNL_E_BUFSIZE;
}
}
if (DSP_SUCCEEDED(status)) {
/* Get a free chirp: */
pChirp = (struct CHNL_IRP *)LST_GetHead(pChnl->pFreeList);
if (pChirp == NULL)
status = CHNL_E_NOIORPS;
}
if (DSP_SUCCEEDED(status)) {
/* Enqueue the chirp on the chnl's IORequest queue: */
pChirp->pHostUserBuf = pChirp->pHostSysBuf = pHostBuf;
if (pChnl->uChnlType == CHNL_PCPY && pChnl->uId > 1)
pChirp->pHostSysBuf = pHostSysBuf;
/*
* Note: for dma chans dwDspAddr contains dsp address
* of SM buffer.
*/
DBC_Assert(pChnlMgr->uWordSize != 0);
/* DSP address */
pChirp->uDspAddr = dwDspAddr / pChnlMgr->uWordSize;
pChirp->cBytes = cBytes;
pChirp->cBufSize = cBufSize;
/* Only valid for output channel */
pChirp->dwArg = dwArg;
pChirp->status = (fIsEOS ? CHNL_IOCSTATEOS :
CHNL_IOCSTATCOMPLETE);
LST_PutTail(pChnl->pIORequests, (struct list_head *)pChirp);
pChnl->cIOReqs++;
DBC_Assert(pChnl->cIOReqs <= pChnl->cChirps);
/* If end of stream, update the channel state to prevent
* more IOR's: */
if (fIsEOS)
pChnl->dwState |= CHNL_STATEEOS;
/* Legacy DSM Processor-Copy */
DBC_Assert(pChnl->uChnlType == CHNL_PCPY);
/* Request IO from the DSP */
IO_RequestChnl(pChnlMgr->hIOMgr, pChnl,
(CHNL_IsInput(pChnl->uMode) ? IO_INPUT : IO_OUTPUT),
&wMbVal);
fSchedDPC = true;
}
omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
SYNC_LeaveCS(pChnlMgr->hCSObj);
if (wMbVal != 0)
IO_IntrDSP2(pChnlMgr->hIOMgr, wMbVal);
/* Schedule a DPC, to do the actual data transfer: */
if (fSchedDPC)
IO_Schedule(pChnlMgr->hIOMgr);
func_end:
return status;
}
/*
* ======== WMD_CHNL_GetIOC ========
* Optionally wait for I/O completion on a channel. Dequeue an I/O
* completion record, which contains information about the completed
* I/O request.
* Note: Ensures Channel Invariant (see notes above).
*/
DSP_STATUS WMD_CHNL_GetIOC(struct CHNL_OBJECT *hChnl, u32 dwTimeOut,
OUT struct CHNL_IOC *pIOC)
{
DSP_STATUS status = DSP_SOK;
struct CHNL_OBJECT *pChnl = (struct CHNL_OBJECT *)hChnl;
struct CHNL_IRP *pChirp;
DSP_STATUS statSync;
bool fDequeueIOC = true;
struct CHNL_IOC ioc = { NULL, 0, 0, 0, 0 };
u8 *pHostSysBuf = NULL;
struct WMD_DEV_CONTEXT *dev_ctxt;
struct DEV_OBJECT *dev_obj;
/* Check args: */
if (pIOC == NULL) {
status = DSP_EPOINTER;
} else if (!MEM_IsValidHandle(pChnl, CHNL_SIGNATURE)) {
status = DSP_EHANDLE;
} else if (dwTimeOut == CHNL_IOCNOWAIT) {
if (LST_IsEmpty(pChnl->pIOCompletions))
status = CHNL_E_NOIOC;
}
dev_obj = DEV_GetFirst();
DEV_GetWMDContext(dev_obj, &dev_ctxt);
if (!dev_ctxt)
status = DSP_EHANDLE;
if (DSP_FAILED(status))
goto func_end;
ioc.status = CHNL_IOCSTATCOMPLETE;
if (dwTimeOut != CHNL_IOCNOWAIT && LST_IsEmpty(pChnl->pIOCompletions)) {
if (dwTimeOut == CHNL_IOCINFINITE)
dwTimeOut = SYNC_INFINITE;
statSync = SYNC_WaitOnEvent(pChnl->hSyncEvent, dwTimeOut);
if (statSync == DSP_ETIMEOUT) {
/* No response from DSP */
ioc.status |= CHNL_IOCSTATTIMEOUT;
fDequeueIOC = false;
} else if (statSync == DSP_EFAIL) {
/* This can occur when the user mode thread is
* aborted (^C), or when _VWIN32_WaitSingleObject()
* fails due to unkown causes. */
/* Even though Wait failed, there may be something in
* the Q: */
if (LST_IsEmpty(pChnl->pIOCompletions)) {
ioc.status |= CHNL_IOCSTATCANCEL;
fDequeueIOC = false;
}
}
}
/* See comment in AddIOReq */
SYNC_EnterCS(pChnl->pChnlMgr->hCSObj);
omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
if (fDequeueIOC) {
/* Dequeue IOC and set pIOC; */
DBC_Assert(!LST_IsEmpty(pChnl->pIOCompletions));
pChirp = (struct CHNL_IRP *)LST_GetHead(pChnl->pIOCompletions);
/* Update pIOC from channel state and chirp: */
if (pChirp) {
pChnl->cIOCs--;
/* If this is a zero-copy channel, then set IOC's pBuf
* to the DSP's address. This DSP address will get
* translated to user's virtual addr later. */
{
pHostSysBuf = pChirp->pHostSysBuf;
ioc.pBuf = pChirp->pHostUserBuf;
}
ioc.cBytes = pChirp->cBytes;
ioc.cBufSize = pChirp->cBufSize;
ioc.dwArg = pChirp->dwArg;
ioc.status |= pChirp->status;
/* Place the used chirp on the free list: */
LST_PutTail(pChnl->pFreeList,
(struct list_head *)pChirp);
} else {
ioc.pBuf = NULL;
ioc.cBytes = 0;
}
} else {
ioc.pBuf = NULL;
ioc.cBytes = 0;
ioc.dwArg = 0;
ioc.cBufSize = 0;
}
/* Ensure invariant: If any IOC's are queued for this channel... */
if (!LST_IsEmpty(pChnl->pIOCompletions)) {
/* Since DSPStream_Reclaim() does not take a timeout
* parameter, we pass the stream's timeout value to
* WMD_CHNL_GetIOC. We cannot determine whether or not
* we have waited in User mode. Since the stream's timeout
* value may be non-zero, we still have to set the event.
* Therefore, this optimization is taken out.
*
* if (dwTimeOut == CHNL_IOCNOWAIT) {
* ... ensure event is set..
* SYNC_SetEvent(pChnl->hSyncEvent);
* } */
SYNC_SetEvent(pChnl->hSyncEvent);
} else {
/* else, if list is empty, ensure event is reset. */
SYNC_ResetEvent(pChnl->hSyncEvent);
}
omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
SYNC_LeaveCS(pChnl->pChnlMgr->hCSObj);
if (fDequeueIOC && (pChnl->uChnlType == CHNL_PCPY && pChnl->uId > 1)) {
if (!(ioc.pBuf < (void *) USERMODE_ADDR))
goto func_cont;
/* If the addr is in user mode, then copy it */
if (!pHostSysBuf || !ioc.pBuf) {
status = DSP_EPOINTER;
goto func_cont;
}
if (!CHNL_IsInput(pChnl->uMode))
goto func_cont1;
/*pHostUserBuf */
status = copy_to_user(ioc.pBuf, pHostSysBuf, ioc.cBytes);
if (status) {
if (current->flags & PF_EXITING)
status = 0;
}
if (status)
status = DSP_EPOINTER;
func_cont1:
kfree(pHostSysBuf);
}
func_cont:
/* Update User's IOC block: */
*pIOC = ioc;
func_end:
return status;
}
/*
* ======== bridge_brd_stop ========
* purpose:
* Puts DSP in self loop.
*
* Preconditions :
* a) None
*/
static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
{
int status = 0;
struct bridge_dev_context *dev_context = dev_ctxt;
u32 dsp_pwr_state;
int i;
struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
struct omap_dsp_platform_data *pdata =
omap_dspbridge_dev->dev.platform_data;
if (dev_context->dw_brd_state == BRD_STOPPED)
return status;
/* as per TRM, it is advised to first drive the IVA2 to 'Standby' mode,
* before turning off the clocks.. This is to ensure that there are no
* pending L3 or other transactons from IVA2 */
dsp_pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
OMAP_POWERSTATEST_MASK;
if (dsp_pwr_state != PWRDM_POWER_OFF) {
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
sm_interrupt_dsp(dev_context, MBX_PM_DSPIDLE);
mdelay(10);
/* IVA2 is not in OFF state */
/* Set PM_PWSTCTRL_IVA2 to OFF */
(*pdata->dsp_prm_rmw_bits)(OMAP_POWERSTATEST_MASK,
PWRDM_POWER_OFF, OMAP3430_IVA2_MOD, OMAP2_PM_PWSTCTRL);
/* Set the SW supervised state transition for Sleep */
(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_FORCE_SLEEP,
OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
}
udelay(10);
/* Release the Ext Base virtual Address as the next DSP Program
* may have a different load address */
if (dev_context->dw_dsp_ext_base_addr)
dev_context->dw_dsp_ext_base_addr = 0;
dev_context->dw_brd_state = BRD_STOPPED; /* update board state */
dsp_wdt_enable(false);
/* Reset DSP */
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Disable the mailbox interrupts */
if (dev_context->mbox) {
omap_mbox_disable_irq(dev_context->mbox, IRQ_RX);
omap_mbox_put(dev_context->mbox);
dev_context->mbox = NULL;
}
if (dev_context->dsp_mmu) {
pr_err("Proc stop mmu if statement\n");
for (i = 0; i < BRDIOCTL_NUMOFMMUTLB; i++) {
if (!tlb[i].ul_gpp_pa)
continue;
iommu_kunmap(dev_context->dsp_mmu, tlb[i].ul_gpp_va);
}
i = 0;
while (l4_peripheral_table[i].phys_addr) {
iommu_kunmap(dev_context->dsp_mmu,
l4_peripheral_table[i].dsp_virt_addr);
i++;
}
iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg0_da);
iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg1_da);
dsp_mmu_exit(dev_context->dsp_mmu);
dev_context->dsp_mmu = NULL;
}
/* Reset IVA IOMMU*/
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
dsp_clock_disable_all(dev_context->dsp_per_clks);
dsp_clk_disable(DSP_CLK_IVA2);
return status;
}
