コード例 #1
0
ファイル: h2_mplx.c プロジェクト: AzerTyQsdF/osx
apr_status_t h2_mplx_process(h2_mplx *m, int stream_id,
                             const h2_request *req, int eos, 
                             h2_stream_pri_cmp *cmp, void *ctx)
{
    apr_status_t status;
    
    AP_DEBUG_ASSERT(m);
    if (m->aborted) {
        return APR_ECONNABORTED;
    }
    status = apr_thread_mutex_lock(m->lock);
    if (APR_SUCCESS == status) {
        h2_io *io = open_io(m, stream_id);
        io->request = req;
        io->request_body = !eos;

        if (eos) {
            status = h2_io_in_close(io);
        }
        
        h2_tq_add(m->q, io->id, cmp, ctx);

        ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, m->c,
                      "h2_mplx(%ld-%d): process", m->c->id, stream_id);
        H2_MPLX_IO_IN(APLOG_TRACE2, m, io, "h2_mplx_process");
        apr_thread_mutex_unlock(m->lock);
    }
    
    if (status == APR_SUCCESS) {
        workers_register(m);
    }
    return status;
}
コード例 #2
0
ファイル: h2_mplx.c プロジェクト: Sp1l/mod_h2
apr_status_t h2_mplx_process(h2_mplx *m, int stream_id, const h2_request *req, 
                             h2_stream_pri_cmp *cmp, void *ctx)
{
    apr_status_t status;
    int was_empty = 0;
    int acquired;
    
    AP_DEBUG_ASSERT(m);
    if ((status = enter_mutex(m, &acquired)) == APR_SUCCESS) {
        if (m->aborted) {
            status = APR_ECONNABORTED;
        }
        else {
            h2_io *io = open_io(m, stream_id);
            io->request = req;
            
            if (!io->request->body) {
                status = h2_io_in_close(io);
            }
            
            was_empty = h2_tq_empty(m->q);
            h2_tq_add(m->q, io->id, cmp, ctx);
            
            ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, m->c,
                          "h2_mplx(%ld-%d): process", m->c->id, stream_id);
            H2_MPLX_IO_IN(APLOG_TRACE2, m, io, "h2_mplx_process");
        }
        leave_mutex(m, acquired);
    }
    if (status == APR_SUCCESS && was_empty) {
        workers_register(m);
    }
    return status;
}
コード例 #3
0
ファイル: snd_fft.c プロジェクト: alexex93/collected_sources
int main(int argc, char **argv)
{
	struct holder holder = {};

	if (argc < 2)
		errx(1, "bad arguments");

	open_io(&holder, argv[1]);

	holder.samples_count = holder.ininfo.samplerate / 100;

	/* do we have enough data? no = clamp the graph */
	if (holder.width > holder.samples_count / 2)
		holder.width = holder.samples_count / 2;

	prepare_fftw(&holder);

	decode(&holder);

	destroy_fftw(&holder);

	close_io(&holder);

	return 0;
}
コード例 #4
0
ファイル: loadfs.c プロジェクト: tycho/openbios
int file_open(const char *filename)
{
	load_fd=open_io(filename);
	if(load_fd >= 0)
            seek_io(load_fd, 0);
	return load_fd>-1;
}
コード例 #5
0
ファイル: boot.c プロジェクト: 3a9LL/panda
void
*load_elf(char *spec)
{
#if 0
	int fd;
	void *entry=NULL;
	int i, lszz_offs, elf_offs;
	char buf[128]; // , *addr;
	Elf_ehdr ehdr;
	Elf_phdr *phdr;
	size_t s;

	if( (fd=open_io(spec)) == -1 )
		return NULL;

	if( (elf_offs=find_elf(fd)) < 0 ) {
		printk("----> %s is not an ELF image\n", buf );
		return NULL;
	}

	if( !(phdr=elf_readhdrs(fd, 0, &ehdr)) ) {
		printk("elf32_readhdrs failed\n");
		return NULL;
	}

	(unsigned long long *)entry = ehdr.e_entry;

	lszz_offs = elf_offs;
	for( i=0; i<ehdr.e_phnum; i++ ) {
		s = MIN( phdr[i].p_filesz, phdr[i].p_memsz );
		seek_io( fd, elf_offs + phdr[i].p_offset );
		/* printk("filesz: %08lX memsz: %08lX p_offset: %08lX p_vaddr %08lX\n",
		   phdr[i].p_filesz, phdr[i].p_memsz, phdr[i].p_offset,
		   phdr[i].p_vaddr ); */
		if( phdr[i].p_vaddr != phdr[i].p_paddr )
			printk("WARNING: ELF segment virtual addr != physical addr\n");
		lszz_offs = MAX( lszz_offs, elf_offs + phdr[i].p_offset + phdr[i].p_filesz );
		if( !s )
			continue;

		 printk("ELF ROM-section loaded at %08lX (size %08lX)\n",
				 (unsigned long)phdr[i].p_vaddr, (unsigned long)phdr[i].p_memsz);
	}
	free( phdr );
	return entry;
#else
	return NULL;
#endif
}
コード例 #6
0
int linux_load(struct sys_info *info, const char *file, const char *cmdline)
{
    struct linux_header hdr;
    struct linux_params *params;
    uint32_t kern_addr, kern_size;
    char *initrd_file = NULL;

    fd = open_io(file);
    if (fd == -1) {
	return -1;
    }

    kern_addr = load_linux_header(&hdr);
    if (kern_addr == 0)
	return LOADER_NOT_SUPPORT;

    params = phys_to_virt(LINUX_PARAM_LOC);
    init_linux_params(params, &hdr);
    set_memory_size(params, info);
    initrd_file = parse_command_line(cmdline, phys_to_virt(COMMAND_LINE_LOC));
    set_command_line_loc(params, &hdr);

    kern_size = load_linux_kernel(&hdr, kern_addr);
    if (kern_size == 0) {
	if (initrd_file)
	    free(initrd_file);
	return -1;
    }

    if (initrd_file) {
	if (load_initrd(&hdr, info, kern_addr+kern_size, params, initrd_file)
		!= 0) {
	    free(initrd_file);
	    return -1;
	}
	free(initrd_file);
    }

    hardware_setup();

    start_linux(kern_addr, params);
    return 0;
}
コード例 #7
0
ファイル: main.c プロジェクト: 3a9LL/panda
static void
briq_startup( void )
{
	const char *paths[] = { "hd:0,\\zImage.chrp", NULL };
	const char *args[] = { "root=/dev/hda2 console=ttyS0,115200", NULL };
	unsigned long entry;
	int i, fd;

	for( i=0; paths[i]; i++ ) {
		if( (fd=open_io(paths[i])) == -1 )
			continue;
		(void) load_elf_rom( &entry, fd );
		close_io( fd );
		encode_bootpath( paths[i], args[i] );

		update_nvram();
		transfer_control_to_elf( entry );
		/* won't come here */
	}
	printk("*** Boot failure! No secondary bootloader specified ***\n");
}
コード例 #8
0
static int load_initrd(struct linux_header *hdr, struct sys_info *info,
	uint32_t kern_end, struct linux_params *params, const char *initrd_file)
{
    uint32_t max;
    uint32_t start, end, size;
    uint64_t forced;

    fd = open_io(initrd_file);
    if (fd == -1) {
	printf("Can't open initrd: %s\n", initrd_file);
	return -1;
    }

#if 0
    if (using_devsize) {
	printf("Attempt to load up to end of device as initrd; "
		"specify the image size\n");
	return -1;
    }
#endif

    size = file_size();


    /* Find out the kernel's restriction on how high the initrd can be
     * placed */
    if (hdr->protocol_version >= 0x203)
	max = hdr->initrd_addr_max;
    else
	max = 0x38000000; /* Hardcoded value for older kernels */

    /* FILO itself is at the top of RAM. (relocated)
     * So, try putting initrd just below us. */
    end = virt_to_phys(_start);
    if (end > max)
	end = max;

    /* If "mem=" option is given, we have to put the initrd within
     * the specified range. */
    if (forced_memsize) {
	forced = forced_memsize;
	if (forced > max)
	    forced = max;
	/* If the "mem=" is lower, it's easy */
	if (forced <= end)
	    end = forced;
	else {
	    /* Otherwise, see if we can put it above us */
	    if (virt_to_phys(_end) + size <= forced)
		end = forced; /* Ok */
	}
    }

    start = end - size;
    start &= ~0xfff; /* page align */
    end = start + size;

    debug("start=%#x end=%#x\n", start, end);

    if (start < kern_end) {
	printf("Initrd is too big to fit in memory\n");
	return -1;
    }

    printf("Loading initrd... ");
    if (read_io(fd, phys_to_virt(start), size) != size) {
	printf("Can't read initrd\n");
	return -1;
    }
    printf("ok\n");

    params->initrd_start = start;
    params->initrd_size = size;

    close_io(fd);

    return 0;
}
コード例 #9
0
ファイル: loadfs.c プロジェクト: tycho/openbios
int file_open(const char *filename)
{
	load_fd=open_io(filename);
	/* if(load_fd!=-1)  */ seek_io(load_fd, 0);
	return load_fd>-1;
}