コード例 #1
0
ファイル: ether.c プロジェクト: npe9/harvey
static int
kernelproxy(Ether *e)
{
	int ctlfd, n;
	char eaddr[13];

	ctlfd = open("#l0/ether0/clone", ORDWR);
	if(ctlfd < 0){
		deprint(2, "%s: etherusb bind #l0: %r\n", argv0);
		return -1;
	}
	close(e->epin->dfd);
	close(e->epout->dfd);
	seprintaddr(eaddr, eaddr+sizeof(eaddr), e->addr);
	n = fprint(ctlfd, "bind %s #u/usb/ep%d.%d/data #u/usb/ep%d.%d/data %s %d %d",
		e->name, e->dev->id, e->epin->id, e->dev->id, e->epout->id,
		eaddr, e->bufsize, e->epout->maxpkt);
	if(n < 0){
		deprint(2, "%s: etherusb bind #l0: %r\n", argv0);
		opendevdata(e->epin, OREAD);
		opendevdata(e->epout, OWRITE);
		close(ctlfd);
		return -1;
	}
	close(ctlfd);
	return 0;
}
コード例 #2
0
ファイル: ether.c プロジェクト: npe9/harvey
static int
openeps(Ether *e, int epin, int epout)
{
	e->epin = openep(e->dev, epin);
	if(e->epin == nil){
		fprint(2, "ether: in: openep %d: %r\n", epin);
		return -1;
	}
	if(epout == epin){
		incref(e->epin);
		e->epout = e->epin;
	}else
		e->epout = openep(e->dev, epout);
	if(e->epout == nil){
		fprint(2, "ether: out: openep %d: %r\n", epout);
		closedev(e->epin);
		return -1;
	}
	if(e->epin == e->epout)
		opendevdata(e->epin, ORDWR);
	else{
		opendevdata(e->epin, OREAD);
		opendevdata(e->epout, OWRITE);
	}
	if(e->epin->dfd < 0 || e->epout->dfd < 0){
		fprint(2, "ether: open i/o ep data: %r\n");
		closedev(e->epin);
		closedev(e->epout);
		return -1;
	}
	dprint(2, "ether: ep in %s maxpkt %d; ep out %s maxpkt %d\n",
		e->epin->dir, e->epin->maxpkt, e->epout->dir, e->epout->maxpkt);

	/* time outs are not activated for I/O endpoints */

	if(usbdebug > 2 || etherdebug > 2){
		devctl(e->epin, "debug 1");
		devctl(e->epout, "debug 1");
		devctl(e->dev, "debug 1");
	}

	return 0;
}
コード例 #3
0
ファイル: usbd.c プロジェクト: elbing/harvey
static void
portreset(Hub *h, int p)
{
	int sts;
	Dev *d, *nd;
	Port *pp;

	d = h->dev;
	pp = &h->port[p];
	nd = pp->dev;
	dprint(2, "%s: %s: port %d: resetting\n", argv0, d->dir, p);
	if(hubfeature(h, p, Fportreset, 1) < 0){
		dprint(2, "%s: %s: port %d: reset: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	sleep(Resetdelay);
	sts = portstatus(h, p);
	if(sts < 0)
		goto Fail;
	if((sts & PSenable) == 0){
		dprint(2, "%s: %s: port %d: not enabled?\n", argv0, d->dir, p);
		hubfeature(h, p, Fportenable, 1);
		sts = portstatus(h, p);
		if((sts & PSenable) == 0)
			goto Fail;
	}
	nd = pp->dev;
	opendevdata(nd, ORDWR);
	if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetaddress, nd->id, 0, nil, 0) < 0){
		dprint(2, "%s: %s: port %d: setaddress: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	if(devctl(nd, "address") < 0){
		dprint(2, "%s: %s: port %d: set address: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetconf, 1, 0, nil, 0) < 0){
		dprint(2, "%s: %s: port %d: setconf: %r\n", argv0, d->dir, p);
		unstall(nd, nd, Eout);
		if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetconf, 1, 0, nil, 0) < 0)
			goto Fail;
	}
	if(nd->dfd >= 0)
		close(nd->dfd);
	return;
Fail:
	pp->state = Pdisabled;
	pp->sts = 0;
	if(pp->hub != nil)
		pp->hub = nil;	/* hub closed by enumhub */
	hubfeature(h, p, Fportenable, 0);
	if(nd != nil)
		devctl(nd, "detach");
	closedev(nd);
}
コード例 #4
0
ファイル: dev.c プロジェクト: vrthra/9front-tmp
int
configdev(Dev *d)
{
	int i;

	if(d->dfd < 0)
		opendevdata(d, ORDWR);
	if(d->dfd < 0)
		return -1;
	if(loaddevdesc(d) < 0)
		return -1;
	for(i = 0; i < d->usb->nconf; i++)
		if(loaddevconf(d, i) < 0)
			return -1;
	return 0;
}
コード例 #5
0
void 
threadmain(int argc, char **argv)
{
	Dev *yd;
	char *devdir = nil;
	Ep *ep;
	int csps[] = {YurexCSP, 0};
	int i;

	if(finddevs(matchdevcsp, csps, &devdir, 1) < 1){
		fprint(2, "No yurex device\n");
		threadexitsall("yurex not found");
	}
	yd = opendev(devdir);
	if(yd == nil)
		sysfatal("opendev: %r");
	if(configdev(yd)<0)
		sysfatal("configdev: %r");

	for(i = 0; i < nelem(yd->usb->ep); i++){
		if((ep = yd->usb->ep[i]) == nil)
			break;
		if(ep->type == Eintr && ep->dir == Ein)
			if(ep->iface->csp == YurexCSP){
				yc.ep = openep(yd, ep->id);
				if(yc.ep == nil)
					sysfatal("YUREX: %s: openep %d: %r\n", yd->dir, ep->id);
				if(opendevdata(yc.ep, OREAD) < 0){
					fprint(2, "YUERX: %s: opendevdata: %r\n",  yc.ep->dir);
					closedev(yc.ep);
					yc.ep = nil;
					break;
				}

				fs.tree = alloctree(nil, nil, DMDIR|0777, destroyfile);
				createfile(fs.tree->root, "bbu", nil, 0444, nil);
				createfile(fs.tree->root, "mbbups", nil, 0444, nil);
				threadpostmountsrv(&fs, "yurex", nil, MREPL|MCREATE);
				proccreate(yurexwork, nil, Stack);
			}
	}

	threadexits(nil);
}
コード例 #6
0
ファイル: usbd.c プロジェクト: elbing/harvey
/*
 * BUG: does not consider max. power avail.
 */
static Dev*
portattach(Hub *h, int p, int sts)
{
	Dev *d;
	Port *pp;
	Dev *nd;
	char fname[80];
	char buf[40];
	char *sp;
	int mp;
	int nr;

	d = h->dev;
	pp = &h->port[p];
	nd = nil;
	pp->state = Pattached;
	dprint(2, "%s: %s: port %d attach sts %#x\n", argv0, d->dir, p, sts);
	sleep(Connectdelay);
	if(hubfeature(h, p, Fportenable, 1) < 0)
		dprint(2, "%s: %s: port %d: enable: %r\n", argv0, d->dir, p);
	sleep(Enabledelay);
	if(hubfeature(h, p, Fportreset, 1) < 0){
		dprint(2, "%s: %s: port %d: reset: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	sleep(Resetdelay);
	sts = portstatus(h, p);
	if(sts < 0)
		goto Fail;
	if((sts & PSenable) == 0){
		dprint(2, "%s: %s: port %d: not enabled?\n", argv0, d->dir, p);
		hubfeature(h, p, Fportenable, 1);
		sts = portstatus(h, p);
		if((sts & PSenable) == 0)
			goto Fail;
	}
	sp = "full";
	if(sts & PSslow)
		sp = "low";
	if(sts & PShigh)
		sp = "high";
	dprint(2, "%s: %s: port %d: attached status %#x\n", argv0, d->dir, p, sts);

	if(devctl(d, "newdev %s %d", sp, p) < 0){
		fprint(2, "%s: %s: port %d: newdev: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	seek(d->cfd, 0, 0);
	nr = read(d->cfd, buf, sizeof(buf)-1);
	if(nr == 0){
		fprint(2, "%s: %s: port %d: newdev: eof\n", argv0, d->dir, p);
		goto Fail;
	}
	if(nr < 0){
		fprint(2, "%s: %s: port %d: newdev: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	buf[nr] = 0;
	snprint(fname, sizeof(fname), "/dev/usb/%s", buf);
	nd = opendev(fname);
	if(nd == nil){
		fprint(2, "%s: %s: port %d: opendev: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	if(usbdebug > 2)
		devctl(nd, "debug 1");
	if(opendevdata(nd, ORDWR) < 0){
		fprint(2, "%s: %s: opendevdata: %r\n", argv0, nd->dir);
		goto Fail;
	}
	if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetaddress, nd->id, 0, nil, 0) < 0){
		dprint(2, "%s: %s: port %d: setaddress: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	if(devctl(nd, "address") < 0){
		dprint(2, "%s: %s: port %d: set address: %r\n", argv0, d->dir, p);
		goto Fail;
	}

	mp=getmaxpkt(nd, strcmp(sp, "low") == 0);
	if(mp < 0){
		dprint(2, "%s: %s: port %d: getmaxpkt: %r\n", argv0, d->dir, p);
		goto Fail;
	}else{
		dprint(2, "%s; %s: port %d: maxpkt %d\n", argv0, d->dir, p, mp);
		devctl(nd, "maxpkt %d", mp);
	}
	if((sts & PSslow) != 0 && strcmp(sp, "full") == 0)
		dprint(2, "%s: %s: port %d: %s is full speed when port is low\n",
			argv0, d->dir, p, nd->dir);
	if(configdev(nd) < 0){
		dprint(2, "%s: %s: port %d: configdev: %r\n", argv0, d->dir, p);
		goto Fail;
	}
	/*
	 * We always set conf #1. BUG.
	 */
	if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetconf, 1, 0, nil, 0) < 0){
		dprint(2, "%s: %s: port %d: setconf: %r\n", argv0, d->dir, p);
		unstall(nd, nd, Eout);
		if(usbcmd(nd, Rh2d|Rstd|Rdev, Rsetconf, 1, 0, nil, 0) < 0)
			goto Fail;
	}
	dprint(2, "%s: %U\n", argv0, nd);
	pp->state = Pconfiged;
	dprint(2, "%s: %s: port %d: configed: %s\n",
			argv0, d->dir, p, nd->dir);
	return pp->dev = nd;
Fail:
	pp->state = Pdisabled;
	pp->sts = 0;
	if(pp->hub != nil)
		pp->hub = nil;	/* hub closed by enumhub */
	hubfeature(h, p, Fportenable, 0);
	if(nd != nil)
		devctl(nd, "detach");
	closedev(nd);
	return nil;
}
コード例 #7
0
ファイル: usbd.c プロジェクト: elbing/harvey
Hub*
newhub(char *fn, Dev *d)
{
	Hub *h;
	int i;
	Usbdev *ud;

	h = emallocz(sizeof(Hub), 1);
	h->isroot = (d == nil);
	if(h->isroot){
		h->dev = opendev(fn);
		if(h->dev == nil){
			fprint(2, "%s: opendev: %s: %r\n", argv0, fn);
			goto Fail;
		}
		if(opendevdata(h->dev, ORDWR) < 0){
			fprint(2, "%s: opendevdata: %s: %r\n", argv0, fn);
			goto Fail;
		}
		configroothub(h);	/* never fails */
	}else{
		h->dev = d;
		if(confighub(h) < 0){
			fprint(2, "%s: %s: config: %r\n", argv0, fn);
			goto Fail;
		}
	}
	if(h->dev == nil){
		fprint(2, "%s: opendev: %s: %r\n", argv0, fn);
		goto Fail;
	}
	devctl(h->dev, "hub");
	ud = h->dev->usb;
	if(h->isroot)
		devctl(h->dev, "info roothub csp %#08ux ports %d",
			0x000009, h->nport);
	else{
		devctl(h->dev, "info hub csp %#08ulx ports %d %q %q",
			ud->csp, h->nport, ud->vendor, ud->product);
		for(i = 1; i <= h->nport; i++)
			if(hubfeature(h, i, Fportpower, 1) < 0)
				fprint(2, "%s: %s: power: %r\n", argv0, fn);
		sleep(h->pwrms);
		for(i = 1; i <= h->nport; i++)
			if(h->leds != 0)
				hubfeature(h, i, Fportindicator, 1);
	}
	h->next = hubs;
	hubs = h;
	nhubs++;
	dprint(2, "%s: hub %#p allocated:", argv0, h);
	dprint(2, " ports %d pwrms %d max curr %d pwrm %d cmp %d leds %d\n",
		h->nport, h->pwrms, h->maxcurrent,
		h->pwrmode, h->compound, h->leds);
	incref(&h->dev->Ref);
	return h;
Fail:
	if(d != nil)
		devctl(d, "detach");
	free(h->port);
	free(h);
	dprint(2, "%s: hub %#p failed to start\n", argv0, h);
	return nil;
}
コード例 #8
0
ファイル: audio.c プロジェクト: CoryXie/nix-os
void
threadmain(int argc, char **argv)
{
	char *devdir;
	int i;
	long value[8], volume[8];
	Audiocontrol *c;
	char *p;
	extern int attachok;
	Ep *ep;
	int csps[] = { Audiocsp, 0};

	devdir = nil;
	volume[0] = Undef;
	for(i = 0; i<8; i++)
		value[i] = 0;
	fmtinstall('A', Aconv);
	fmtinstall('U', Ufmt);
	quotefmtinstall();

	ARGBEGIN{
	case 'N':
		p = EARGF(usage());	/* ignore dev nb */
		break;
	case 'd':
		usbdebug++;
		verbose++;
		break;
	case 'm':
		mntpt = EARGF(usage());
		break;
	case 'p':
		attachok++;
		break;
	case 's':
		srvpost = EARGF(usage());
		break;
	case 'v':
		volume[0] = strtol(EARGF(usage()), &p, 0);
		for(i = 1; i < 8; i++)
			volume[i] = volume[0];
		break;
	case 'V':
		verbose++;
		break;
	default:
		usage();
	}ARGEND
	switch(argc){
	case 0:
		break;
	case 1:
		devdir = argv[0];
		break;
	default:
		usage();
	}
	if(devdir == nil)
		if(finddevs(matchdevcsp, csps, &devdir, 1) < 1){
			fprint(2, "No usb audio\n");
			threadexitsall("usbaudio not found");
		}
	ad = opendev(devdir);
	if(ad == nil)
		sysfatal("opendev: %r");
	if(configdev(ad) < 0)
		sysfatal("configdev: %r");
	
	for(i = 0; i < nelem(ad->usb->ddesc); i++)
		if(ad->usb->ddesc[i] != nil)
		switch(ad->usb->ddesc[i]->data.bDescriptorType){
		case AUDIO_INTERFACE:
			audio_interface(ad, ad->usb->ddesc[i]);
			break;
		case AUDIO_ENDPOINT:
			audio_endpoint(ad, ad->usb->ddesc[i]);
			break;
		}

	controlchan = chancreate(sizeof(char*), 8);

	for(i = 0; i < nelem(ad->usb->ep); i++)
		if((ep = ad->usb->ep[i]) != nil){
			if(ep->iface->csp == CSP(Claudio, 2, 0) && ep->dir == Eout)
				endpt[0] = ep->id;
			if(ep->iface->csp == CSP(Claudio, 2, 0) && ep->dir == Ein)
				endpt[1] = ep->id;
			if(buttonendpt<0 && Class(ep->iface->csp) == Clhid)
				buttonendpt = ep->id;
		}
	if(endpt[0] != -1){
		if(verbose)
			fprint(2, "usb/audio: playback on ep %d\n", endpt[0]);
		interface[0] = ad->usb->ep[endpt[0]]->iface->id;
	}
	if(endpt[1] != -1){
		if(verbose)
			fprint(2, "usb/audio: record on ep %d\n", endpt[0]);
		interface[1] = ad->usb->ep[endpt[1]]->iface->id;
	}
	if(verbose && buttonendpt >= 0)
		fprint(2, "usb/audio: buttons on ep %d\n", buttonendpt);

	if(endpt[Play] >= 0){
		if(verbose)
			fprint(2, "Setting default play parameters: %d Hz, %d channels at %d bits\n",
				defaultspeed[Play], 2, 16);
		if(findalt(Play, 2, 16, defaultspeed[Play]) < 0){
			if(findalt(Play, 2, 16, 48000) < 0)
				sysfatal("Can't configure playout for %d or %d Hz", defaultspeed[Play], 48000);
			fprint(2, "Warning, can't configure playout for %d Hz, configuring for %d Hz instead\n",
				defaultspeed[Play], 48000);
			defaultspeed[Play] = 48000;
		}
		value[0] = 2;
		if(setcontrol(Play, "channels", value) == Undef)
			sysfatal("Can't set play channels");
		value[0] = 16;
		if(setcontrol(Play, "resolution", value) == Undef)
			sysfatal("Can't set play resolution");
	}

	if(endpt[Record] >= 0){
		setrec = 1;
		if(verbose)
			fprint(2, "Setting default record parameters: "
				"%d Hz, %d channels at %d bits\n",
				defaultspeed[Record], 2, 16);
		i = 2;
		while(findalt(Record, i, 16, defaultspeed[Record]) < 0)
			if(i == 2 && controls[Record][Channel_control].max == 1){
				fprint(2, "Warning, can't configure stereo "
					"recording, configuring mono instead\n");
				i = 1;
			}else
				break;
		if(findalt(Record, i, 16, 48000) < 0){
			endpt[Record] = -1;	/* disable recording */
			setrec = 0;
			fprint(2, "Warning, can't configure record for %d Hz or %d Hz\n",
				defaultspeed[Record], 48000);
		}else
			fprint(2, "Warning, can't configure record for %d Hz, "
				"configuring for %d Hz instead\n",
				defaultspeed[Record], 48000);
		defaultspeed[Record] = 48000;
		if(setrec){
			value[0] = i;
			if(setcontrol(Record, "channels", value) == Undef)
				sysfatal("Can't set record channels");
			value[0] = 16;
			if(setcontrol(Record, "resolution", value) == Undef)
				sysfatal("Can't set record resolution");
		}
	}

	getcontrols();	/* Get the initial value of all controls */
	value[0] = defaultspeed[Play];
	if(endpt[Play] >= 0 && setcontrol(Play, "speed", value) < 0)
		sysfatal("can't set play speed");
	value[0] = defaultspeed[Record];
	if(endpt[Record] >= 0 && setcontrol(Record, "speed", value) < 0)
		fprint(2, "%s: can't set record speed\n", argv0);
	value[0] = 0;
	setcontrol(Play, "mute", value);

	if(volume[0] != Undef){
		c = &controls[Play][Volume_control];
		if(*p == '%' && c->min != Undef)
			for(i = 0; i < 8; i++)
				volume[i] = (volume[i]*c->max + (100-volume[i])*c->min)/100;
		if(c->settable)
			setcontrol(Play, "volume", volume);
		c = &controls[Record][Volume_control];
		if(c->settable && setrec)
			setcontrol(Record, "volume", volume);
	}

	if(buttonendpt > 0){
		buttondev = openep(ad, buttonendpt);
		if(buttondev == nil)
			sysfatal("openep: buttons: %r");
		if(opendevdata(buttondev, OREAD) < 0)
			sysfatal("open buttons fd: %r");
		proccreate(buttonproc, nil, STACKSIZE);
	}
	proccreate(controlproc, nil, STACKSIZE);
	proccreate(serve, nil, STACKSIZE);

	threadexits(nil);
}