void TrapList::deInitial(void) {
if( inited ) {
os_tsk_delete(tsk_send_trap);
udp_close(soc_massage);
udp_release_socket(soc_massage);
}
}
bool diag_stop(void){
return diag_task_id != 0 && os_tsk_delete(diag_task_id) == OS_R_OK;
}
__task void power (void)
{
unsigned int count =0;
unsigned int temp;
static GPIO_InitTypeDef GPIO_InitStruct;
GPIO_PinState bitstatus;
while(1)
{
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
if(bitstatus==GPIO_PIN_RESET)
{
os_dly_wait (200);
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
if(bitstatus==GPIO_PIN_RESET)
{
if(HAL_RTCEx_BKUPRead(&RtcHandle, RTC_BKP_DR6)==0)
{
count =0;
do{
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
count++;
if(count>5000000)
{
Time3Disable();
GUI_Clear();
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_3,GPIO_PIN_SET);
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_2,GPIO_PIN_RESET);
if(zhuantskid !=NULL) os_tsk_delete(zhuantskid);
if(maintskid !=NULL) os_tsk_delete(maintskid);
if(keytskid !=NULL) os_tsk_delete(keytskid);
if(servertskid !=NULL) os_tsk_delete(servertskid);
if(meuntskid !=NULL) os_tsk_delete(meuntskid);
if(setsystemtimetskid !=NULL) os_tsk_delete(setsystemtimetskid);
if(setledlighttskid !=NULL) os_tsk_delete(setledlighttskid);
if(setledtimetskid !=NULL) os_tsk_delete(setledtimetskid);
if(setsoundtskid !=NULL) os_tsk_delete(setsoundtskid);
if(setworkmodetskid !=NULL) os_tsk_delete(setworkmodetskid);
if(yushentskid !=NULL) os_tsk_delete(yushentskid);
HAL_RTCEx_BKUPWrite(&RtcHandle,RTC_BKP_DR6,1); // 说明是正常关机状态；
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_3,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_2,GPIO_PIN_SET);
}
}while(bitstatus==GPIO_PIN_RESET);
}else
{
os_mut_init(mut_GLCD);
os_mut_init(mut_Gclock);
GUI_UC_SetEncodeUTF8();
zhuantskid = os_tsk_create (zhuan1, 0);
maintskid = os_tsk_create (Main_Task, 0);
keytskid = os_tsk_create (phase_KEY, 0);
servertskid = os_tsk_create (Server_Task, 0);
Time3Enable(HAL_RTCEx_BKUPRead(&RtcHandle, RTC_BKP_DR1));
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_3,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_2,GPIO_PIN_SET);
HAL_RTCEx_BKUPWrite(&RtcHandle,RTC_BKP_DR6,0); // 清楚掉关机状态
}
}
}
}
}
