int main(int argc, char **args)
{
// Load the mesh.
Mesh mesh;
H3DReader mesh_loader;
mesh_loader.load("fichera-corner.mesh3d", &mesh);
// Perform initial mesh refinement.
for (int i=0; i < INIT_REF_NUM; i++) mesh.refine_all_elements(H3D_H3D_H3D_REFT_HEX_XYZ);
// Create an H1 space with default shapeset.
H1Space space(&mesh, bc_types, essential_bc_values, Ord3(P_INIT_X, P_INIT_Y, P_INIT_Z));
// Initialize weak formulation.
WeakForm wf;
wf.add_matrix_form(bilinear_form<double, double>, bilinear_form<Ord, Ord>, HERMES_SYM, HERMES_ANY);
wf.add_vector_form(linear_form<double, double>, linear_form<Ord, Ord>, HERMES_ANY);
// Set exact solution.
ExactSolution exact(&mesh, fndd);
// DOF and CPU convergence graphs.
SimpleGraph graph_dof_est, graph_cpu_est, graph_dof_exact, graph_cpu_exact;
// Time measurement.
TimePeriod cpu_time;
cpu_time.tick();
// Initialize the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
initialize_solution_environment(matrix_solver, argc, args);
// Adaptivity loop.
int as = 1;
bool done = false;
do
{
info("---- Adaptivity step %d:", as);
// Construct globally refined reference mesh and setup reference space.
Space* ref_space = construct_refined_space(&space,1 , H3D_H3D_H3D_REFT_HEX_XYZ);
// Initialize discrete problem.
bool is_linear = true;
DiscreteProblem dp(&wf, ref_space, is_linear);
// Set up the solver, matrix, and rhs according to the solver selection.
SparseMatrix* matrix = create_matrix(matrix_solver);
Vector* rhs = create_vector(matrix_solver);
Solver* solver = create_linear_solver(matrix_solver, matrix, rhs);
// Initialize the preconditioner in the case of SOLVER_AZTECOO.
if (matrix_solver == SOLVER_AZTECOO)
{
((AztecOOSolver*) solver)->set_solver(iterative_method);
((AztecOOSolver*) solver)->set_precond(preconditioner);
// Using default iteration parameters (see solver/aztecoo.h).
}
// Assemble the reference problem.
info("Assembling on reference mesh (ndof: %d).", Space::get_num_dofs(ref_space));
dp.assemble(matrix, rhs);
// Time measurement.
cpu_time.tick();
// Solve the linear system on reference mesh. If successful, obtain the solution.
info("Solving on reference mesh.");
Solution ref_sln(ref_space->get_mesh());
if(solver->solve()) Solution::vector_to_solution(solver->get_solution(), ref_space, &ref_sln);
else error ("Matrix solver failed.\n");
// Time measurement.
cpu_time.tick();
// Project the reference solution on the coarse mesh.
Solution sln(space.get_mesh());
info("Projecting reference solution on coarse mesh.");
OGProjection::project_global(&space, &ref_sln, &sln, matrix_solver);
// Time measurement.
cpu_time.tick();
// Output solution and mesh with polynomial orders.
if (solution_output)
{
out_fn_vtk(&sln, "sln", as);
out_orders_vtk(&space, "order", as);
}
// Skip the visualization time.
cpu_time.tick(HERMES_SKIP);
// Calculate element errors and total error estimate.
info("Calculating error estimate and exact error.");
Adapt *adaptivity = new Adapt(&space, HERMES_H1_NORM);
bool solutions_for_adapt = true;
double err_est_rel = adaptivity->calc_err_est(&sln, &ref_sln, solutions_for_adapt) * 100;
// Calculate exact error.
solutions_for_adapt = false;
double err_exact_rel = adaptivity->calc_err_exact(&sln, &exact, solutions_for_adapt) * 100;
// Report results.
info("ndof_coarse: %d, ndof_fine: %d.", Space::get_num_dofs(&space), Space::get_num_dofs(ref_space));
info("err_est_rel: %g%%, err_exact_rel: %g%%.", err_est_rel, err_exact_rel);
// Add entry to DOF and CPU convergence graphs.
graph_dof_est.add_values(Space::get_num_dofs(&space), err_est_rel);
graph_dof_est.save("conv_dof_est.dat");
graph_cpu_est.add_values(cpu_time.accumulated(), err_est_rel);
graph_cpu_est.save("conv_cpu_est.dat");
graph_dof_exact.add_values(Space::get_num_dofs(&space), err_exact_rel);
graph_dof_exact.save("conv_dof_exact.dat");
graph_cpu_exact.add_values(cpu_time.accumulated(), err_exact_rel);
graph_cpu_exact.save("conv_cpu_exact.dat");
// If err_est_rel is too large, adapt the mesh.
if (err_est_rel < ERR_STOP) done = true;
else
{
info("Adapting coarse mesh.");
adaptivity->adapt(THRESHOLD);
}
if (Space::get_num_dofs(&space) >= NDOF_STOP) done = true;
// Clean up.
delete ref_space->get_mesh();
delete ref_space;
delete matrix;
delete rhs;
delete solver;
delete adaptivity;
// Increase the counter of performed adaptivity steps.
as++;
} while (!done);
// Properly terminate the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
finalize_solution_environment(matrix_solver);
return 1;
}
int main(int argc, char **args)
{
// Test variable.
int success_test = 1;
if (argc < 5) error("Not enough parameters.");
// Load the mesh.
Mesh mesh;
H3DReader mloader;
if (!mloader.load(args[1], &mesh)) error("Loading mesh file '%s'.", args[1]);
// Initialize the space according to the
// command-line parameters passed.
sscanf(args[2], "%d", &P_INIT_X);
sscanf(args[3], "%d", &P_INIT_Y);
sscanf(args[4], "%d", &P_INIT_Z);
Ord3 order(P_INIT_X, P_INIT_Y, P_INIT_Z);
H1Space space(&mesh, bc_types, essential_bc_values, order);
// Initialize the weak formulation.
WeakForm wf;
wf.add_matrix_form(bilinear_form<double, scalar>, bilinear_form<Ord, Ord>, HERMES_SYM, HERMES_ANY);
wf.add_vector_form(linear_form<double, scalar>, linear_form<Ord, Ord>, HERMES_ANY);
// Time measurement.
TimePeriod cpu_time;
cpu_time.tick();
// Initialize the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
initialize_solution_environment(matrix_solver, argc, args);
// Adaptivity loop.
int as = 1;
bool done = false;
do {
info("---- Adaptivity step %d:", as);
// Construct globally refined reference mesh and setup reference space.
Space* ref_space = construct_refined_space(&space,1 , H3D_H3D_H3D_REFT_HEX_XYZ);
out_orders_vtk(ref_space, "space", as);
// Initialize the FE problem.
bool is_linear = true;
DiscreteProblem lp(&wf, ref_space, is_linear);
// Set up the solver, matrix, and rhs according to the solver selection.
SparseMatrix* matrix = create_matrix(matrix_solver);
Vector* rhs = create_vector(matrix_solver);
Solver* solver = create_linear_solver(matrix_solver, matrix, rhs);
// Initialize the preconditioner in the case of SOLVER_AZTECOO.
if (matrix_solver == SOLVER_AZTECOO)
{
((AztecOOSolver*) solver)->set_solver(iterative_method);
((AztecOOSolver*) solver)->set_precond(preconditioner);
// Using default iteration parameters (see solver/aztecoo.h).
}
// Assemble the reference problem.
info("Assembling on reference mesh (ndof: %d).", Space::get_num_dofs(ref_space));
lp.assemble(matrix, rhs);
// Time measurement.
cpu_time.tick();
// Solve the linear system on reference mesh. If successful, obtain the solution.
info("Solving on reference mesh.");
Solution ref_sln(ref_space->get_mesh());
if(solver->solve()) Solution::vector_to_solution(solver->get_solution(), ref_space, &ref_sln);
else {
printf("Matrix solver failed.\n");
success_test = 0;
}
// Time measurement.
cpu_time.tick();
// Project the reference solution on the coarse mesh.
Solution sln(space.get_mesh());
info("Projecting reference solution on coarse mesh.");
OGProjection::project_global(&space, &ref_sln, &sln, matrix_solver);
// Time measurement.
cpu_time.tick();
// Calculate element errors and total error estimate.
info("Calculating error estimate and exact error.");
Adapt *adaptivity = new Adapt(&space, HERMES_H1_NORM);
bool solutions_for_adapt = true;
double err_est_rel = adaptivity->calc_err_est(&sln, &ref_sln, solutions_for_adapt) * 100;
// Report results.
info("ndof_coarse: %d, ndof_fine: %d.", Space::get_num_dofs(&space), Space::get_num_dofs(ref_space));
info("err_est_rel: %g%%.", err_est_rel);
// If err_est_rel is too large, adapt the mesh.
if (err_est_rel < ERR_STOP) {
done = true;
ExactSolution ex_sln(&mesh, exact_solution);
// Calculate exact error.
info("Calculating exact error.");
Adapt *adaptivity = new Adapt(&space, HERMES_H1_NORM);
bool solutions_for_adapt = false;
double err_exact = adaptivity->calc_err_exact(&sln, &ex_sln, solutions_for_adapt, HERMES_TOTAL_ERROR_ABS);
if (err_exact > EPS)
// Calculated solution is not precise enough.
success_test = 0;
break;
}
else {
info("Adapting coarse mesh.");
adaptivity->adapt(THRESHOLD);
}
// If we reached the maximum allowed number of degrees of freedom, set the return flag to failure.
if (Space::get_num_dofs(&space) >= NDOF_STOP)
{
done = true;
success_test = 0;
}
// Clean up.
delete ref_space->get_mesh();
delete ref_space;
delete matrix;
delete rhs;
delete solver;
delete adaptivity;
// Increase the counter of performed adaptivity steps.
as++;
} while (!done);
// Properly terminate the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
finalize_solution_environment(matrix_solver);
if (success_test) {
info("Success!");
return ERR_SUCCESS;
}
else {
info("Failure!");
return ERR_FAILURE;
}
}
int main(int argc, char **args)
{
// Test variable.
int success_test = 1;
// Check the number of command-line parameters.
if (argc < 2) {
info("Use x, y, z, xy, xz, yz, or xyz as a command-line parameter.");
error("Not enough command-line parameters.");
}
// Determine anisotropy type from the command-line parameter.
ANISO_TYPE = parse_aniso_type(args[1]);
// Load the mesh.
Mesh mesh;
H3DReader mesh_loader;
mesh_loader.load("hex-0-1.mesh3d", &mesh);
// Assign the lowest possible directional polynomial degrees so that the problem's NDOF >= 1.
assign_poly_degrees();
// Create an H1 space with default shapeset.
info("Setting directional polynomial degrees %d, %d, %d.", P_INIT_X, P_INIT_Y, P_INIT_Z);
H1Space space(&mesh, bc_types, essential_bc_values, Ord3(P_INIT_X, P_INIT_Y, P_INIT_Z));
// Initialize weak formulation.
WeakForm wf;
wf.add_matrix_form(bilinear_form<double, scalar>, bilinear_form<Ord, Ord>, HERMES_SYM, HERMES_ANY);
wf.add_vector_form(linear_form<double, scalar>, linear_form<Ord, Ord>, HERMES_ANY);
// Set exact solution.
ExactSolution exact(&mesh, fndd);
// Time measurement.
TimePeriod cpu_time;
cpu_time.tick();
// Adaptivity loop.
int as = 1;
bool done = false;
do
{
info("---- Adaptivity step %d:", as);
// Construct globally refined reference mesh and setup reference space.
Space* ref_space = construct_refined_space(&space, 1);
// Initialize discrete problem.
bool is_linear = true;
DiscreteProblem dp(&wf, ref_space, is_linear);
// Set up the solver, matrix, and rhs according to the solver selection.
SparseMatrix* matrix = create_matrix(matrix_solver);
Vector* rhs = create_vector(matrix_solver);
Solver* solver = create_linear_solver(matrix_solver, matrix, rhs);
// Initialize the preconditioner in the case of SOLVER_AZTECOO.
if (matrix_solver == SOLVER_AZTECOO)
{
((AztecOOSolver*) solver)->set_solver(iterative_method);
((AztecOOSolver*) solver)->set_precond(preconditioner);
// Using default iteration parameters (see solver/aztecoo.h).
}
// Assemble the reference problem.
info("Assembling on reference mesh (ndof: %d).", Space::get_num_dofs(ref_space));
dp.assemble(matrix, rhs);
// Time measurement.
cpu_time.tick();
// Solve the linear system on reference mesh. If successful, obtain the solution.
info("Solving on reference mesh.");
Solution ref_sln(ref_space->get_mesh());
if(solver->solve()) Solution::vector_to_solution(solver->get_solution(), ref_space, &ref_sln);
else {
error ("Matrix solver failed.\n");
success_test = 0;
}
// Time measurement.
cpu_time.tick();
// Project the reference solution on the coarse mesh.
Solution sln(space.get_mesh());
info("Projecting reference solution on coarse mesh.");
OGProjection::project_global(&space, &ref_sln, &sln, matrix_solver);
// Time measurement.
cpu_time.tick();
// Output solution and mesh with polynomial orders.
if (solution_output)
{
out_fn_vtk(&sln, "sln", as);
out_orders_vtk(&space, "order", as);
}
// Skip the visualization time.
cpu_time.tick(HERMES_SKIP);
// Calculate element errors and total error estimate.
info("Calculating error estimate and exact error.");
Adapt *adaptivity = new Adapt(&space, HERMES_H1_NORM);
bool solutions_for_adapt = true;
double err_est_rel = adaptivity->calc_err_est(&sln, &ref_sln, solutions_for_adapt) * 100;
// Calculate exact error.
solutions_for_adapt = false;
double err_exact_rel = adaptivity->calc_err_exact(&sln, &exact, solutions_for_adapt) * 100;
// Report results.
info("ndof_coarse: %d, ndof_fine: %d.", Space::get_num_dofs(&space), Space::get_num_dofs(ref_space));
info("err_est_rel: %g%%, err_exact_rel: %g%%.", err_est_rel, err_exact_rel);
// If err_est_rel is too large, adapt the mesh.
if (err_est_rel < ERR_STOP) done = true;
else
{
info("Adapting coarse mesh.");
adaptivity->adapt(THRESHOLD);
}
if (Space::get_num_dofs(&space) >= NDOF_STOP) done = true;
// Clean up.
delete ref_space->get_mesh();
delete ref_space;
delete matrix;
delete rhs;
delete solver;
delete adaptivity;
// Increase the counter of performed adaptivity steps.
as++;
} while (!done);
// This is the actual test.
#define ERROR_SUCCESS 0
#define ERROR_FAILURE -1
int ndof_allowed;
switch (ANISO_TYPE) {
case ANISO_X: ndof_allowed = 28; break;
case ANISO_Y: ndof_allowed = 28; break;
case ANISO_Z: ndof_allowed = 28; break;
case ANISO_X | ANISO_Y: ndof_allowed = 98; break;
case ANISO_X | ANISO_Z: ndof_allowed = 98; break;
case ANISO_Y | ANISO_Z: ndof_allowed = 98; break;
case ANISO_X | ANISO_Y | ANISO_Z: ndof_allowed = 343; break;
default: error("Admissible command-line options are x, y, x, xy, xz, yz, xyz.");
}
int ndof = Space::get_num_dofs(&space);
info("ndof_actual = %d", ndof);
info("ndof_allowed = %d", ndof_allowed);
if (ndof > ndof_allowed)
success_test = 0;
if (success_test) {
info("Success!");
return ERR_SUCCESS;
}
else {
info("Failure!");
return ERR_FAILURE;
}
}
int main(int argc, char **args)
{
// Time measurement.
TimePeriod cpu_time;
cpu_time.tick();
// Load the mesh.
Mesh mesh;
H3DReader mloader;
mloader.load("lshape_hex.mesh3d", &mesh);
// Perform initial mesh refinement.
for (int i=0; i < INIT_REF_NUM; i++) mesh.refine_all_elements(H3D_H3D_H3D_REFT_HEX_XYZ);
// Create an Hcurl space with default shapeset.
HcurlSpace space(&mesh, bc_types, essential_bc_values, Ord3(P_INIT_X, P_INIT_Y, P_INIT_Z));
// Initialize weak formulation.
WeakForm wf;
wf.add_matrix_form(biform<double, scalar>, biform<Ord, Ord>, HERMES_SYM);
wf.add_matrix_form_surf(biform_surf, biform_surf_ord);
wf.add_vector_form_surf(liform_surf, liform_surf_ord);
// Initialize discrete problem.
bool is_linear = true;
DiscreteProblem dp(&wf, &space, is_linear);
// Initialize the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
initialize_solution_environment(matrix_solver, argc, args);
// Set up the solver, matrix, and rhs according to the solver selection.
SparseMatrix* matrix = create_matrix(matrix_solver);
Vector* rhs = create_vector(matrix_solver);
Solver* solver = create_linear_solver(matrix_solver, matrix, rhs);
// Initialize the preconditioner in the case of SOLVER_AZTECOO.
if (matrix_solver == SOLVER_AZTECOO)
{
((AztecOOSolver*) solver)->set_solver(iterative_method);
((AztecOOSolver*) solver)->set_precond(preconditioner);
// Using default iteration parameters (see solver/aztecoo.h).
}
// Assemble stiffness matrix and load vector.
info("Assembling the linear problem (ndof: %d).", Space::get_num_dofs(&space));
dp.assemble(matrix, rhs);
// Solve the linear system. If successful, obtain the solution.
info("Solving the linear problem.");
Solution sln(space.get_mesh());
if(solver->solve()) Solution::vector_to_solution(solver->get_solution(), &space, &sln);
else error ("Matrix solver failed.\n");
// Output solution and mesh with polynomial orders.
if (solution_output)
{
out_fn_vtk(&sln, "sln");
out_orders_vtk(&space, "order");
}
// Time measurement.
cpu_time.tick();
// Print timing information.
info("Solution and mesh with polynomial orders saved. Total running time: %g s", cpu_time.accumulated());
// Clean up.
delete matrix;
delete rhs;
delete solver;
// Properly terminate the solver in the case of SOLVER_PETSC or SOLVER_MUMPS.
finalize_solution_environment(matrix_solver);
return 0;
}