void bootup(char *modeptr, int enumber)
/*****************************/
{
char autodir[MAXPATH];
char parampath[MAXPATH];
char plotname[STR64];
char mstr[MAXPATH];
char rtautocmd[2 * MAXPATH + 20];
char estring[5];
extern char PlotterName[];
extern char PrinterName[];
int do_rt = 0;
int lval;
endian_tester et;
(void) modeptr;
et.my_int = 0x0a0b0c0d;
BigEndian = (et.my_bytes[0] == 0x0a) ? 1:0;
psg_pid = 0; /* set pids to zero */
if ( !Bnmr )
disp_status("BOOTUP ");
/* May 18, 1987. Addition to read the system global parameters.
If a problem occurs, the program exits immediately, for this
should not happen. The CONPAR file is on the distribution tape. */
strcpy(parampath,systemdir);
#ifdef UNIX
strcat(parampath,"/conpar");
#else
strcat(parampath,"conpar");
#endif
if (P_read(SYSTEMGLOBAL,parampath))
{
fprintf(stderr,"problem loading system global parameters from %s\n",
parampath);
exit(1);
}
openVnmrInfo(systemdir);
/* If automation mode, use value of autodir to establish path to experiment */
if (mode_of_vnmr == AUTOMATION)
{
getAutoDir(autodir, MAXPATH);
if (strlen(autodir) == 0)
{
fprintf( stderr, "unable to access 'autodir' parameter\n" );
exit(1);
}
}
/* setup signal handlers to catch these signals */
if (Wissun()) /* Only do this if using SUN console */
{
set_acqi_signal();
}
else if (mode_of_vnmr == FOREGROUND) /* Only creat a Vnmr socket if foreground */
{
setupVnmrAsync(AcqSocketIsRead);
}
#ifndef VNMRJ
if (Wishds())
last_line = 19;
else
#endif
last_line = 20;
/* load parameters in global file */
/* moved 9 lines to read GLOBAL before EXP, this way we can use
curexpdir to restart Vnmr in the last exp used. May 17, 1997 */
strcpy(parampath,userdir);
strcat(parampath,"/global");
if (P_read(GLOBAL,parampath))
Werrprintf("problem loading global parameters");
#ifdef VNMRJ
// set curexpdir based on jcurwin of viewport 1
jcurwin_init(curexpdir);
#endif
// load unshared globalX for viewport X if foreground
if (!Bnmr)
{
sprintf(parampath,"%s/global%d",userdir,VnmrJViewId);
/* Don't complain if unshared globals are missing */
P_read(GLOBAL,parampath);
}
// set OperatorName
if ( (P_getstring(GLOBAL,"operator",OperatorName,1,MAXSTR) != 0) ||
( ! strcmp(OperatorName, "") ) )
strcpy(OperatorName, UserName);
/* If lock fails, and program is running in foreground mode, set
current experiment to be EXP0, which doesn't exist. The user
can then join another experiment or use other techniques to
unlock the desired experiment.
If running in any other mode, exit immediately with an error
message. */
/* May 19, 1997. Use curexpdir to set the enumber, check if directory
still exists, if not make it exp1. Only done if FOREGROUND Vnmr.
Acqproc, autoproc, and other procs determine enumber themselves.
Note that curexpdir is overwritten below, when we read exp parameters */
#ifdef VNMRJ
jviewport_init();
P_setstring(GLOBAL,"curexp",curexpdir,1);
#else
P_getstring(GLOBAL,"curexp",curexpdir,1,MAXPATH);
#endif
if (mode_of_vnmr == FOREGROUND)
{
enumber = expdir_to_expnum(curexpdir);
if (enumber == 0)
lval = -1;
else if ( ! access(curexpdir,F_OK))
lval = lockExperiment( enumber, FOREGROUND);
else
lval = -1;
}
#ifdef SUN
else if (mode_of_vnmr == ACQUISITION)
lval = (enumber == 0) ? -2 :checkAcqLock( enumber );
else if ( Bnmr && (enumber == 0) )
lval = -2;
else
#endif
lval = lockExperiment( enumber, mode_of_vnmr );
if (lval != 0)
{
if ((mode_of_vnmr != FOREGROUND) && (lval != -2) )
{
fprintf( stderr, "unable to lock experiment %d\n", enumber);
exit(1);
}
if (enumber == 0)
{
#ifdef VNMRJ
if (VnmrJViewId != 1)
{
P_getstring(GLOBAL, "jviewportlabel", mstr, VnmrJViewId, MAXPATH);
Werrprintf( "No experiment selected for the %s viewport.",mstr);
}
jcurwin_setexp( "0" , -1 );
#else
if (lval != -2)
Werrprintf( "No experiment selected.");
#endif
}
else
{
#ifdef VNMRJ
if (VnmrJViewId == 1)
Werrprintf( "Unable to lock experiment %d", enumber );
else
{
P_getstring(GLOBAL, "jviewportlabel", mstr, VnmrJViewId, MAXPATH);
Werrprintf( "Unable to lock experiment %d for the %s viewport.",enumber, mstr);
}
jcurwin_setexp( "0", -1 );
#else
Werrprintf( "Unable to lock experiment %d", enumber );
#endif
}
strcpy( curexpdir, userdir );
#ifdef UNIX
strcat( curexpdir, "/exp0" );
#else
vms_fname_cat( curexpdir, "[.exp0]" );
#endif
#ifdef VNMRJ
if (mode_of_vnmr != AUTOMATION)
{
sprintf(mstr,"exp0 %s",curexpdir);
writelineToVnmrJ("expn",mstr);
}
#endif
}
/* Only read in parameters if the target experiment was locked. */
else
{
if (mode_of_vnmr == AUTOMATION)
strcpy( curexpdir, &autodir[ 0 ] );
else
strcpy( curexpdir, userdir );
sprintf(estring, "%d", enumber);
#ifdef UNIX
strcat(curexpdir, "/exp");
strcat(curexpdir, estring);
#else
vms_fname_cat(curexpdir, "[.exp");
vms_fname_cat(curexpdir, estring);
vms_fname_cat(curexpdir, "]");
#endif
if (mode_of_vnmr == AUTOMATION)
{
lval = strlen( &datadir[ 0 ] );
if (lval > MAXPATH-8)
{
fprintf(stderr, "data pathname too long in automation mode");
exit(1);
}
else if (lval > 1)
{
int ex;
sprintf(rtautocmd, "cp %s.fid/sampleinfo %s/sampleinfo",
datadir,curexpdir);
system(rtautocmd);
ex = 0;
/* Wait up to 0.5 secs for fid to appear */
while ( access(rtautocmd,R_OK) && (ex < 50) )
{
struct timespec timer;
timer.tv_sec=0;
timer.tv_nsec = 10000000; /* 10 msec */
#ifdef __INTERIX
usleep(timer.tv_nsec/1000);
#else
nanosleep( &timer, NULL);
#endif
ex++;
}
sprintf( &rtautocmd[ 0 ], "%s('%s','nodg')\n",
(acqStartUseRtp) ? "RTP" : "RT", &datadir[ 0 ] );
do_rt = 1; /* do the rt command after reading global tree */
}
else /* read curpar parameters only from the automation exp */
{
D_getparfilepath(CURRENT, parampath, curexpdir);
if (P_read(CURRENT,parampath))
{ /* if no parameters in current experiment */
strcpy(parampath,systemdir);
#ifdef UNIX
strcat(parampath,"/stdpar/H1.par/procpar");
#else
vms_fname_cat(parampath,"[.stdpar.H1_par]procpar");
#endif
if (P_read(CURRENT,parampath))
Werrprintf("problem loading current parameters");
}
P_copy(CURRENT,PROCESSED);
}
}
else /* if (mode_of_vnmr != AUTOMATION) */
{
/* load parameters in curexp/curpar file */
D_getparfilepath(CURRENT, parampath, curexpdir);
if (P_read(CURRENT,parampath))
Werrprintf("problem loading current parameters from \"%s\"",
parampath);
/* load parameters in curexp/procpar file */
D_getparfilepath(PROCESSED, parampath, curexpdir);
if (P_read(PROCESSED,parampath))
Werrprintf("problem loading processed parameters from \"%s\"",
parampath);
#ifdef VNMRJ
sprintf(mstr,"exp%s %s",estring,curexpdir);
writelineToVnmrJ("expn",mstr);
#endif
}
}
/* May 17, 1997. We read GLOBAL parameters earlier */
setGlobalPars();
#ifdef VNMRJ
if (!Bnmr)
saveViewPortAddr();
#endif
bufferscale = getbufscale(); /* obtain the value for bufferscale */
finddatainfo();
DEBUGPRINT1("bufferscale set to %d\n", bufferscale);
D_init(); /* initialize the data file handler;
bufferscale must be known before
D_init() is called. */
/* setAppdirs needs to happen after operator is set in setGlobalPars but before
* any macros are called
*/
#ifdef VNMRJ
if (VnmrJViewId == 1)
#endif
{
setAppdirs();
}
specIndex = 1;
if (mode_of_vnmr == AUTOMATION)
{
if (do_rt)
{
turnOffFixpar();
execString( &rtautocmd[ 0 ] );
}
else
{
Werrprintf( "Spectrometer in automation mode" );
}
}
else if (enumber || (mode_of_vnmr != BACKGROUND) )
{
disp_expno();
}
init_proc2d();
strcpy(dconi_runstring,"dcon\n");
/* Assign some function pointers for the */
/* graphics module */
set_bootup_gfcn_ptrs();
if (Bnmr)
init_colors(); /* set default colors for graphics and plotters */
set_automount_dir();
/* Set up plotting parameters */
/* If there is trouble setting plottin parameters (ie plotting device
doesn't exist or devicetable/devicenames is bad, set to "none" device */
if (P_getstring(GLOBAL,"plotter" ,plotname, 1,32))
{ P_setstring(GLOBAL,"plotter","none",0);
strcpy(PlotterName,"none");
}
if (!setPlotterName(plotname))
{ P_setstring(GLOBAL,"plotter","none",0);
strcpy(PlotterName,"none");
}
/* Set up printing parameters */
/* If there is trouble setting printing parameters (ie printing device
doesn't exist or devicetable/devicenames is bad, set to "none" device */
if (P_getstring(GLOBAL,"printer" ,plotname, 1,32))
{ P_setstring(GLOBAL,"printer","none",0);
strcpy(PrinterName,"none");
}
if (!setPrinterName(plotname))
{ P_setstring(GLOBAL,"Printer","none",0);
strcpy(PrinterName,"none");
}
#ifdef SUN
/*
* Set up signal handler to exit VNMR
* The function nmr_quit will be called when Vnmr exits
*/
set_nmr_quit_signal();
#endif
check_datastation();
#ifdef VNMRJ
writelineToVnmrJ("bootup","");
/* create a frame for graphics display */
frame_update("init", "");
#endif
/* The extra space in the first Wscrprintf is essential for
the scrollable text subwindow to work correctly. */
/* --- print revision ID and Date, Compiled within revdate.c --- */
P_setstring( SYSTEMGLOBAL, "rev", &RevID[ 0 ], 1);
P_setstring( SYSTEMGLOBAL, "revdate", &RevDate[ 0 ], 1);
if (!Bnmr) /* only execute the bootup macro if we are in forground */
{
Wscrprintf("\n %s\n",RevID);
Wscrprintf(" %s\n",RevDate);
Wscrprintf(" %s\n\n",Copyright);
if (strlen(PlotterName) > 0)
Wscrprintf( " Plotting Device is set to %s\n",PlotterName);
else
Wscrprintf( " Plotting Device is set to ''\n");
if (strlen(PrinterName) > 0)
Wscrprintf( " Printing Device is set to %s\n\n",PrinterName);
else
Wscrprintf( " Printing Device is set to ''\n\n");
disp_current_seq();
if (Wissun())
sendTripleEscToMaster( 'C',"bootup(0)");
else
execString("bootup(0)\n");
disp_status(" ");
}
else if (enumber)
{
execString("bootup(1)\n");
}
p11_init();
}
int
main(int argc, char *argv[])
{
int opt, c_flag = 0;
CK_SLOT_ID slot_id = 0;
char *so_pin = NULL, *user_pin = NULL, *data_store = NULL;
CK_FUNCTION_LIST *funcs;
CK_ULONG slot_count;
CK_SESSION_HANDLE sess;
CK_RV rv;
struct object *objs_to_migrate = NULL, *tmp, *to_free;
int exit_code = 0, rc;
lib_csulcca = dlopen("libcsulcca.so", (RTLD_GLOBAL | RTLD_NOW));
if (lib_csulcca == NULL) {
print_error("Couldn't get a handle to the CCA library.");
return NULL;
}
CSNDKTC = dlsym(lib_csulcca, "CSNDKTC_32");
CSNBKTC = dlsym(lib_csulcca, "CSNBKTC_32");
while ((opt = getopt(argc, argv, "c:d:s:u:nvh")) != -1) {
switch (opt) {
case 'c':
c_flag++;
slot_id = atoi(optarg);
break;
case 'd':
data_store = strdup(optarg);
break;
case 's':
so_pin = strdup(optarg);
break;
case 'u':
user_pin = strdup(optarg);
break;
case 'n':
n_flag++;
break;
case 'v':
v_flag++;
break;
case 'h':
usage(argv[0]);
return 0;
default:
usage(argv[0]);
return 1;
}
}
if (!c_flag || !data_store || !so_pin || !user_pin) {
usage(argv[0]);
return 1;
}
if (n_flag)
printf("Dry-run of migration in progress\n");
funcs = p11_init();
if (!funcs) {
return 2;
}
rv = funcs->C_GetSlotList(TRUE, NULL_PTR, &slot_count);
if (rv != CKR_OK) {
p11_error("C_GetSlotList", rv);
exit_code = 3;
goto finalize;
}
if (slot_id >= slot_count) {
print_error("%lu is not a valid slot ID.", slot_id);
exit_code = 4;
goto finalize;
}
if (v_flag > 1)
printf("Slot id %lu is valid\n", slot_id);
/* Open a r/w session */
rv = funcs->C_OpenSession(slot_id, CKF_RW_SESSION|CKF_SERIAL_SESSION, NULL_PTR, NULL_PTR, &sess);
if (rv != CKR_OK) {
p11_error("C_OpenSession", rv);
exit_code = 5;
goto finalize;
}
if (v_flag > 1)
printf("PKCS#11 r/w session opened\n");
/* Login as the SO just validate the supplied pin */
rv = funcs->C_Login(sess, CKU_SO, (CK_BYTE *)so_pin, strlen(so_pin));
if (rv != CKR_OK) {
p11_error("C_Login (SO)", rv);
exit_code = 6;
goto finalize;
}
if (v_flag > 1)
printf("PKCS#11 SO login successful\n");
/* Logout the SO */
rv = funcs->C_Logout(sess);
if (rv != CKR_OK) {
p11_error("C_Logout", rv);
exit_code = 7;
goto finalize;
}
/* Login as the USER to validate the supplied pin and do the migration */
rv = funcs->C_Login(sess, CKU_USER, (CK_BYTE *)user_pin, strlen(user_pin));
if (rv != CKR_OK) {
p11_error("C_Login (USER)", rv);
exit_code = 8;
goto finalize;
}
if (v_flag > 1)
printf("PKCS#11 USER login successful\n");
/* Find the affected PKCS#11 objects */
rc = find_opaque_objects(funcs, sess, &objs_to_migrate);
if (rc) {
exit_code = 9;
goto close;
}
/* XXX Print status: migrating X pub keys, X priv keys, X 3DES keys... */
/* Use the CCA lib to migrate them to the new master key */
rv = migrate_objects(objs_to_migrate);
if (rv != CKR_OK) {
exit_code = 10;
goto close;
}
/* XXX Print status */
/* Delete the old PKCS#11 objects (or just attribs if possible) and replace with the
* migrated data */
rc = replace_objects(funcs, sess, objs_to_migrate);
if (rc) {
exit_code = 11;
goto close;
}
/* XXX Print status: X objects successfully migrated */
/* Free the list of PKCS#11 objects */
for (to_free = objs_to_migrate; to_free; to_free = tmp) {
tmp = to_free->next;
free(to_free->opaque_attr);
free(to_free);
}
/* Migrate the keys used to encrypt the data store */
rc = migrate_master_keys(so_pin, user_pin, data_store);
if (rc) {
exit_code = 12;
goto close;
}
close:
funcs->C_CloseSession(sess);
finalize:
p11_fini(funcs);
return exit_code;
}