コード例 #1
0
ファイル: nmea0183_test.c プロジェクト: vyacht/stm32
int main(int argc, char * argv[])
{
  int i = 0;
  int j = 0;
  char *state_table[] = {
#include "packet_names.h"
  };

  struct gps_packet_t lexer;
  packet_init(&lexer);

  for (i = 0; i < 7; i++) {
     printf("Sentence no %d\n", i);
     for(j = 0; j < strlen(nmea[i]); j++) {
       lexer.inbuffer[lexer.inbuflen] = nmea[i][j];
       lexer.inbuflen++;
       if(lexer.inbuflen % 10 == 0)
         packet_parse(&lexer);
     }
     lexer.inbuffer[lexer.inbuflen] = '\r';
       lexer.inbuflen++;
     lexer.inbuffer[lexer.inbuflen] = '\n';
       lexer.inbuflen++;

  }

  packet_parse(&lexer);

  return 0;

}
コード例 #2
0
ファイル: test.c プロジェクト: atimorin/dnscat2
int main(int argc, const char *argv[])
{
  packet_t *packet;

  uint8_t  *bytes;
  size_t    length;

  /* Create a SYN */
  packet = packet_create_syn(0x1234, 0x0000, 0x0000);
  packet_print(packet);

  /* Convert it to bytes and free the original */
  bytes = packet_to_bytes(packet, &length);
  packet_destroy(packet);

  /* Parse the bytes from the old packet to create a new one */
  packet = packet_parse(bytes, length);
  packet_print(packet);
  packet_destroy(packet);
  safe_free(bytes);

  /* Create a MSG */
  packet = packet_create_msg(0x1234, 0x0000, 0x0001, (uint8_t*)"AAAAA", 5);
  packet_print(packet);

  /* Convert it to bytes and free the orignal */
  bytes = packet_to_bytes(packet, &length);
  packet_destroy(packet);

  /* Parse the bytes from the old packet to create a new one */
  packet = packet_parse(bytes, length);
  packet_print(packet);
  packet_destroy(packet);
  safe_free(bytes);

  /* Create a FIN */
  packet = packet_create_fin(0x1234);
  packet_print(packet);

  /* Convert it to bytes and free the orignal */
  bytes = packet_to_bytes(packet, &length);
  packet_destroy(packet);
  safe_free(bytes);

  /* Parse the bytes from the old packet to create a new one */
  packet = packet_parse(bytes, length);
  packet_print(packet);
  packet_destroy(packet);

  print_memory();

  return 0;
}
コード例 #3
0
ファイル: packet.c プロジェクト: BackupTheBerlios/libssh-svn
static int packet_wait2(SSH_SESSION *session, int type, int blocking) {
  int rc = SSH_ERROR;

  enter_function();
  do {
    rc = packet_read2(session);
    if (rc != SSH_OK) {
      leave_function();
      return rc;
    }
    if (packet_translate(session) != SSH_OK) {
      leave_function();
      return SSH_ERROR;
    }
    switch (session->in_packet.type) {
      case SSH2_MSG_DISCONNECT:
        packet_parse(session);
        ssh_log(session, SSH_LOG_PACKET, "received disconnect packet");
        leave_function();
        return SSH_ERROR;
      case SSH2_MSG_CHANNEL_WINDOW_ADJUST:
      case SSH2_MSG_CHANNEL_DATA:
      case SSH2_MSG_CHANNEL_EXTENDED_DATA:
      case SSH2_MSG_CHANNEL_REQUEST:
      case SSH2_MSG_CHANNEL_EOF:
      case SSH2_MSG_CHANNEL_CLOSE:
        packet_parse(session);
        break;
      case SSH2_MSG_IGNORE:
        break;
      default:
        if (type && (type != session->in_packet.type)) {
          ssh_set_error(session, SSH_FATAL,
              "packet_wait2(): Received a %d type packet, but expected a %d\n",
              session->in_packet.type, type);
          leave_function();
          return SSH_ERROR;
        }
        leave_function();
        return SSH_OK;
    }
    if (blocking == 0) {
      leave_function();
      return SSH_OK; //shouldn't it return SSH_AGAIN here ?
    }
  } while(1);

  leave_function();
  return SSH_OK;
}
コード例 #4
0
ファイル: packet.c プロジェクト: Sigterm-no/telehash-c
packet_t packet_copy(packet_t p)
{
  packet_t np;
  np = packet_parse(packet_raw(p), packet_len(p));
  np->to = p->to;
  np->from = p->from;
  np->out = p->out;
  return np;
}
コード例 #5
0
ファイル: protocol.c プロジェクト: george-hopkins/libsigrok
static int handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi, int idx)
{
	float temperature, humidity;
	struct sr_datafeed_packet packet;
	struct sr_datafeed_analog analog;
	struct sr_analog_encoding encoding;
	struct sr_analog_meaning meaning;
	struct sr_analog_spec spec;
	struct dev_context *devc;
	GSList *l;
	int ret;

	(void)idx;

	devc = sdi->priv;

	ret = packet_parse((const char *)buf, idx, &temperature, &humidity);
	if (ret < 0) {
		sr_err("Failed to parse packet.");
		return SR_ERR;
	}

	sr_analog_init(&analog, &encoding, &meaning, &spec, 3);

	/* Common values for both channels. */
	packet.type = SR_DF_ANALOG;
	packet.payload = &analog;
	analog.num_samples = 1;

	/* Temperature. */
	l = g_slist_copy(sdi->channels);
	l = g_slist_remove_link(l, g_slist_nth(l, 1));
	meaning.channels = l;
	meaning.mq = SR_MQ_TEMPERATURE;
	meaning.unit = SR_UNIT_CELSIUS; /* TODO: Use C/F correctly. */
	analog.data = &temperature;
	sr_session_send(sdi, &packet);
	g_slist_free(l);

	/* Humidity. */
	if (mic_devs[idx].has_humidity) {
		l = g_slist_copy(sdi->channels);
		l = g_slist_remove_link(l, g_slist_nth(l, 0));
		meaning.channels = l;
		meaning.mq = SR_MQ_RELATIVE_HUMIDITY;
		meaning.unit = SR_UNIT_PERCENTAGE;
		analog.data = &humidity;
		sr_session_send(sdi, &packet);
		g_slist_free(l);
	}

	devc->num_samples++;

	return SR_OK;
}
コード例 #6
0
ファイル: packet.c プロジェクト: BackupTheBerlios/libssh-svn
static int packet_wait1(SSH_SESSION *session, int type, int blocking) {

  enter_function();

  ssh_log(session, SSH_LOG_PROTOCOL, "packet_wait1 waiting for %d", type);

  do {
    if ((packet_read1(session) != SSH_OK) ||
        (packet_translate(session) != SSH_OK)) {
      leave_function();
      return SSH_ERROR;
    }
    ssh_log(session, SSH_LOG_PACKET, "packet_wait1() received a type %d packet",
        session->in_packet.type);
    switch (session->in_packet.type) {
      case SSH_MSG_DISCONNECT:
        packet_parse(session);
        leave_function();
        return SSH_ERROR;
      case SSH_SMSG_STDOUT_DATA:
      case SSH_SMSG_STDERR_DATA:
      case SSH_SMSG_EXITSTATUS:
        if (channel_handle1(session,type) < 0) {
          leave_function();
          return SSH_ERROR;
        }
        break;
      case SSH_MSG_DEBUG:
      case SSH_MSG_IGNORE:
        break;
        /*          case SSH2_MSG_CHANNEL_CLOSE:
                    packet_parse(session);
                    break;;
                    */               
      default:
        if (type && (type != session->in_packet.type)) {
          ssh_set_error(session, SSH_FATAL,
              "packet_wait1(): Received a %d type packet, but expected %d\n",
              session->in_packet.type, type);
          leave_function();
          return SSH_ERROR;
        }
        leave_function();
        return SSH_OK;
    }

    if (blocking == 0) {
      leave_function();
      return SSH_OK;
    }
  } while(1);

  leave_function();
  return SSH_OK;
}
コード例 #7
0
ファイル: crypt_1a.c プロジェクト: Sigterm-no/telehash-c
packet_t crypt_delineize_1a(crypt_t c, packet_t p)
{
  packet_t line;
  unsigned char iv[16], hmac[32];
  crypt_1a_t cs = (crypt_1a_t)c->cs;

  memset(iv,0,16);
  memcpy(iv+12,p->body+16+4,4);

  hmac_256(cs->keyIn,16,p->body+16+4,p->body_len-(16+4),hmac);
  fold3(hmac,hmac);
  if(memcmp(hmac,p->body+16,4) != 0) return packet_free(p);

  aes_128_ctr(cs->keyIn,p->body_len-(16+4+4),iv,p->body+16+4+4,p->body+16+4+4);

  line = packet_parse(p->body+16+4+4, p->body_len-(16+4+4));
  packet_free(p);
  return line;
}
コード例 #8
0
ファイル: protocol.c プロジェクト: george-hopkins/libsigrok
static int handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi, int idx)
{
	struct sr_datafeed_packet packet;
	struct sr_datafeed_analog_old analog;
	struct dev_context *devc;
	struct center_info info;
	GSList *l;
	int i, ret;

	devc = sdi->priv;

	memset(&analog, 0, sizeof(struct sr_datafeed_analog_old));
	memset(&info, 0, sizeof(struct center_info));

	ret = packet_parse(buf, idx, &info);
	if (ret < 0) {
		sr_err("Failed to parse packet.");
		return SR_ERR;
	}

	/* Common values for all 4 channels. */
	packet.type = SR_DF_ANALOG_OLD;
	packet.payload = &analog;
	analog.mq = SR_MQ_TEMPERATURE;
	analog.unit = (info.celsius) ? SR_UNIT_CELSIUS : SR_UNIT_FAHRENHEIT;
	analog.num_samples = 1;

	/* Send the values for T1 - T4. */
	for (i = 0; i < NUM_CHANNELS; i++) {
		l = NULL;
		l = g_slist_append(l, g_slist_nth_data(sdi->channels, i));
		analog.channels = l;
		analog.data = &(info.temp[i]);
		sr_session_send(sdi, &packet);
		g_slist_free(l);
	}

	devc->num_samples++;

	return SR_OK;
}
コード例 #9
0
ファイル: crypt_1a.c プロジェクト: Sigterm-no/telehash-c
packet_t crypt_deopenize_1a(crypt_t self, packet_t open)
{
  unsigned char secret[uECC_BYTES], iv[16], b64[uECC_BYTES*2*2], hash[32];
  packet_t inner, tmp;
  crypt_1a_t cs = (crypt_1a_t)self->cs;

  if(open->body_len <= (4+40)) return NULL;
  inner = packet_new();
  if(!packet_body(inner,NULL,open->body_len-(4+40))) return packet_free(inner);

  // get the shared secret to create the iv+key for the open aes
  if(!uECC_shared_secret(open->body+4, cs->id_private, secret)) return packet_free(inner);
  crypt_hash(secret,uECC_BYTES,hash);
  fold1(hash,hash);
  memset(iv,0,16);
  iv[15] = 1;

  // decrypt the inner
  aes_128_ctr(hash,inner->body_len,iv,open->body+4+40,inner->body);

  // load inner packet
  if((tmp = packet_parse(inner->body,inner->body_len)) == NULL) return packet_free(inner);
  packet_free(inner);
  inner = tmp;

  // generate secret for hmac
  if(inner->body_len != uECC_BYTES*2) return packet_free(inner);
  if(!uECC_shared_secret(inner->body, cs->id_private, secret)) return packet_free(inner);

  // verify
  hmac_256(secret,uECC_BYTES,open->body+4,open->body_len-4,hash);
  fold3(hash,hash);
  if(memcmp(hash,open->body,4) != 0) return packet_free(inner);

  // stash the hex line key w/ the inner
  util_hex(open->body+4,40,b64);
  packet_set_str(inner,"ecc",(char*)b64);

  return inner;
}
コード例 #10
0
ファイル: smsc_oisd.c プロジェクト: coffeecoco/kannel-redis
/*
 * Find the first packet in "in", delete it from "in", and return it as
 * a struct.  Return NULL if "in" contains no packet.  Always delete
 * leading non-packet data from "in".
 */
static struct packet *packet_extract(Octstr *in, SMSCConn *conn)
{
    Octstr *packet;
    int size, i;
    static char s[4][4] = {
        { 0x01, 0x0b, 0x00, 0x00 },
        { 0x01, 0x00, 0x00, 0x00 },
        { 0x00, 0x04, 0x00, 0x00 },
        { 0x00, 0x09, 0x00, 0x00 }
    }; /* msgtype, oper, 0, 0 */
    char known_bytes[4];

    if (octstr_len(in) < 10)
        return NULL;
    octstr_get_many_chars(known_bytes, in, 4, 4);
    /* Find s, and delete everything up to it. */
    /* If packet starts with one of s, it should be good packet */
    for (i = 0; i < 4; i++) {
        if (memcmp(s[i], known_bytes, 4) == 0)
            break;
    }

    if (i >= 4) {
        error(0, "OISD[%s]: wrong packet",
              octstr_get_cstr(conn->id));
        octstr_dump(in, 0);
        return NULL;
    }

    /* Find end of packet */
    size = (octstr_get_char(in, 9) << 8) | octstr_get_char(in, 8);

    if (size + 10 > octstr_len(in))
        return NULL;

    packet = octstr_copy(in, 0, size + 10);
    octstr_delete(in, 0, size + 10);

    return packet_parse(packet);
}
コード例 #11
0
ファイル: erl_bif_port.c プロジェクト: crownedgrouse/otp
/*
 decode_packet(Type,Bin,Options)
 Returns:
     {ok, PacketBodyBin, RestBin}
     {more, PacketSz | undefined}
     {error, invalid}
*/
BIF_RETTYPE decode_packet_3(BIF_ALIST_3)
{
    unsigned max_plen = 0;   /* Packet max length, 0=no limit */
    unsigned trunc_len = 0;  /* Truncate lines if longer, 0=no limit */
    int http_state = 0;      /* 0=request/response 1=header */
    int packet_sz;           /*-------Binaries involved: ------------------*/
    byte* bin_ptr;           /*| orig: original binary                     */
    byte bin_bitsz;          /*| bin: BIF_ARG_2, may be sub-binary of orig */
	                     /*| packet: prefix of bin                     */
    char* body_ptr;          /*| body: part of packet to return            */
    int body_sz;             /*| rest: bin without packet                  */
    struct packet_callback_args pca;
    enum PacketParseType type;
    Eterm* hp;
    Eterm* hend;
    ErlSubBin* rest;
    Eterm res;
    Eterm options;
    int   code;
    char  delimiter = '\n';

    if (!is_binary(BIF_ARG_2) || 
        (!is_list(BIF_ARG_3) && !is_nil(BIF_ARG_3))) {
        BIF_ERROR(BIF_P, BADARG);
    }
    switch (BIF_ARG_1) {
    case make_small(0): case am_raw: type = TCP_PB_RAW; break;
    case make_small(1): type = TCP_PB_1; break;
    case make_small(2): type = TCP_PB_2; break;
    case make_small(4): type = TCP_PB_4; break;
    case am_asn1: type = TCP_PB_ASN1; break;
    case am_sunrm: type = TCP_PB_RM; break;
    case am_cdr: type = TCP_PB_CDR; break;
    case am_fcgi: type = TCP_PB_FCGI; break;
    case am_line: type = TCP_PB_LINE_LF; break;
    case am_tpkt: type = TCP_PB_TPKT; break;
    case am_http: type = TCP_PB_HTTP; break;
    case am_httph: type = TCP_PB_HTTPH; break;
    case am_http_bin: type = TCP_PB_HTTP_BIN; break;
    case am_httph_bin: type = TCP_PB_HTTPH_BIN; break;
    case am_ssl_tls: type = TCP_PB_SSL_TLS; break;
    default:
        BIF_ERROR(BIF_P, BADARG);
    }

    options = BIF_ARG_3;
    while (!is_nil(options)) {
        Eterm* cons = list_val(options);
        if (is_tuple(CAR(cons))) {
            Eterm* tpl = tuple_val(CAR(cons));
            Uint val;
            if (tpl[0] == make_arityval(2) &&
		term_to_Uint(tpl[2],&val) && val <= UINT_MAX) {
                switch (tpl[1]) {
                case am_packet_size:
                    max_plen = val;
                    goto next_option;
                case am_line_length:
                    trunc_len = val;
                    goto next_option;
                case am_line_delimiter:
                    if (type == TCP_PB_LINE_LF && val <= 255) {
                        delimiter = (char)val;
                        goto next_option;
                    }
                }
            }
        }
        BIF_ERROR(BIF_P, BADARG);

    next_option:       
        options = CDR(cons);
    }


    pca.bin_sz = binary_size(BIF_ARG_2);
    ERTS_GET_BINARY_BYTES(BIF_ARG_2, bin_ptr, pca.bin_bitoffs, bin_bitsz);  
    if (pca.bin_bitoffs != 0) {
        pca.aligned_ptr = erts_alloc(ERTS_ALC_T_TMP, pca.bin_sz);
        erts_copy_bits(bin_ptr, pca.bin_bitoffs, 1, pca.aligned_ptr, 0, 1, pca.bin_sz*8);
    }
    else {
        pca.aligned_ptr = bin_ptr;
    }
    packet_sz = packet_get_length(type, (char*)pca.aligned_ptr, pca.bin_sz,
                                  max_plen, trunc_len, delimiter, &http_state);
    if (!(packet_sz > 0 && packet_sz <= pca.bin_sz)) {
        if (packet_sz < 0) {
	    goto error;
        }
        else { /* not enough data */
            Eterm plen = (packet_sz==0) ? am_undefined : 
                erts_make_integer(packet_sz, BIF_P);
            Eterm* hp = HAlloc(BIF_P,3);        
            res = TUPLE2(hp, am_more, plen);
            goto done;
        }
    }
    /* We got a whole packet */

    body_ptr = (char*) pca.aligned_ptr;
    body_sz = packet_sz;
    packet_get_body(type, (const char**) &body_ptr, &body_sz);

    ERTS_GET_REAL_BIN(BIF_ARG_2, pca.orig, pca.bin_offs, pca.bin_bitoffs, bin_bitsz);
    pca.p = BIF_P;
    pca.res = THE_NON_VALUE;
    pca.string_as_bin = (type == TCP_PB_HTTP_BIN || type == TCP_PB_HTTPH_BIN);
    code = packet_parse(type, (char*)pca.aligned_ptr, packet_sz, &http_state,
			&packet_callbacks_erl, &pca);
    if (code == 0) { /* no special packet parsing, make plain binary */
        ErlSubBin* body;
        Uint hsz = 2*ERL_SUB_BIN_SIZE + 4;
        hp = HAlloc(BIF_P, hsz);
        hend = hp + hsz;

        body = (ErlSubBin *) hp;
        body->thing_word = HEADER_SUB_BIN;
        body->size = body_sz;
        body->offs = pca.bin_offs + (body_ptr - (char*)pca.aligned_ptr);
        body->orig = pca.orig;
        body->bitoffs = pca.bin_bitoffs;
        body->bitsize = 0;
        body->is_writable = 0;
        hp += ERL_SUB_BIN_SIZE;
        pca.res = make_binary(body);
    }
    else if (code > 0) {
	Uint hsz = ERL_SUB_BIN_SIZE + 4;
	ASSERT(pca.res != THE_NON_VALUE);
	hp = HAlloc(BIF_P, hsz);
	hend = hp + hsz;
    }
    else {
error:
	hp = HAlloc(BIF_P,3);        
	res = TUPLE2(hp, am_error, am_invalid);
	goto done;
    }

    rest = (ErlSubBin *) hp;
    rest->thing_word = HEADER_SUB_BIN;
    rest->size = pca.bin_sz - packet_sz;
    rest->offs = pca.bin_offs + packet_sz;
    rest->orig = pca.orig;
    rest->bitoffs = pca.bin_bitoffs;
    rest->bitsize = bin_bitsz;   /* The extra bits go into the rest. */
    rest->is_writable = 0;
    hp += ERL_SUB_BIN_SIZE;
    res = TUPLE3(hp, am_ok, pca.res, make_binary(rest));
    hp += 4;
    ASSERT(hp==hend); (void)hend;

done:
    if (pca.aligned_ptr != bin_ptr) {
        erts_free(ERTS_ALC_T_TMP, pca.aligned_ptr);
    }
    BIF_RET(res);
}
コード例 #12
0
/**
 * @brief Reads data from a channel.
 *
 * @param channel       The channel to read from.
 *
 * @param dest          The destination buffer which will get the data.
 *
 * @param count         The count of bytes to be read.
 *
 * @param is_stderr     A boolean value to mark reading from the stderr flow.
 *
 * @return The number of bytes read, 0 on end of file or SSH_ERROR on error.
 *
 * @warning The read function using a buffer has been renamed to
 *          channel_read_buffer().
 */
int channel_read(CHANNEL *channel, void *dest, u32 count, int is_stderr) {
  SSH_SESSION *session = channel->session;
  BUFFER *stdbuf = channel->stdout_buffer;
  u32 len;

  enter_function();

  if (count == 0) {
    leave_function();
    return 0;
  }

  if (is_stderr) {
    stdbuf=channel->stderr_buffer;
  }

  /*
   * We may have problem if the window is too small to accept as much data
   * as asked
   */
  ssh_log(session, SSH_LOG_PROTOCOL,
      "Read (%d) buffered : %d bytes. Window: %d",
      count,
      buffer_get_rest_len(stdbuf),
      channel->local_window);

  if (count > buffer_get_rest_len(stdbuf) + channel->local_window) {
    if (grow_window(session, channel,
          count - buffer_get_rest_len(stdbuf)) < 0) {
      leave_function();
      return -1;
    }
  }

  /* block reading if asked bytes=0 */
  while (buffer_get_rest_len(stdbuf) == 0 ||
      buffer_get_rest_len(stdbuf) < count) {
    if (channel->remote_eof && buffer_get_rest_len(stdbuf) == 0) {
      leave_function();
      return 0;
    }

    if (channel->remote_eof) {
      /* Return the resting bytes in buffer */
      break;
    }

    if (buffer_get_rest_len(stdbuf) >= count) {
      /* Stop reading when buffer is full enough */
      break;
    }

    if ((packet_read(session)) != SSH_OK ||
        (packet_translate(session) != SSH_OK)) {
      leave_function();
      return -1;
    }
    packet_parse(session);
  }

  if (channel->local_window < WINDOWLIMIT) {
    if (grow_window(session, channel, 0) < 0) {
      leave_function();
      return -1;
    }
  }

  len = buffer_get_rest_len(stdbuf);
  /* Read count bytes if len is greater, everything otherwise */
  len = (len > count ? count : len);
  memcpy(dest, buffer_get_rest(stdbuf), len);
  buffer_pass_bytes(stdbuf,len);

  leave_function();
  return len;
}
コード例 #13
0
ファイル: auth.c プロジェクト: BackupTheBerlios/libssh-svn
static int wait_auth_status(SSH_SESSION *session,int kbdint){
    int err=SSH_AUTH_ERROR;
    int cont=1;
    STRING *auth;
    u8 partial=0;
    int todo = 0;
    char *auth_methods = NULL;
    enter_function();
    while(cont){
        if(packet_read(session))
            break;
        if(packet_translate(session))
            break;
        switch(session->in_packet.type){
            case SSH2_MSG_USERAUTH_FAILURE:
                auth = buffer_get_ssh_string(session->in_buffer);
                if(!auth || buffer_get_u8(session->in_buffer,&partial)!=1 ){
                    ssh_set_error(session,SSH_FATAL,
                            "invalid SSH_MSG_USERAUTH_FAILURE message");
                    leave_function();
                    return SSH_AUTH_ERROR;
                }
                auth_methods = string_to_char(auth);
                if(partial) {
                    err=SSH_AUTH_PARTIAL;
                    ssh_set_error(session,SSH_NO_ERROR,"partial success, authentications that can continue : %s", auth_methods);
                } else {
                    err=SSH_AUTH_DENIED;
                    ssh_set_error(session,SSH_REQUEST_DENIED,"Access denied. authentications that can continue : %s", auth_methods);

                    session->auth_methods = 0;
                    if (strstr(auth_methods, "password") != NULL) {
                        session->auth_methods |= SSH_AUTH_METHOD_PASSWORD;
                    }
                    if (strstr(auth_methods, "keyboard-interactive") != NULL) {
                        session->auth_methods |= SSH_AUTH_METHOD_INTERACTIVE;
                    }
                    if (strstr(auth_methods, "publickey") != NULL) {
                        session->auth_methods |= SSH_AUTH_METHOD_PUBLICKEY;
                    }
                    if (strstr(auth_methods, "hostbased") != NULL) {
                        session->auth_methods |= SSH_AUTH_METHOD_HOSTBASED;
                    }
                }


                free(auth);
                free(auth_methods);
                cont=0;
                break;
            case SSH2_MSG_USERAUTH_PK_OK:
                /* SSH monkeys have defined the same number for both */
                /* SSH_MSG_USERAUTH_PK_OK and SSH_MSG_USERAUTH_INFO_REQUEST */
                /* which is not really smart; */
          /*case SSH2_MSG_USERAUTH_INFO_REQUEST: */
                if(kbdint){
                    err=SSH_AUTH_INFO;
                    cont=0;
                    break;
                }
                /* continue through success */
            case SSH2_MSG_USERAUTH_SUCCESS:
                err=SSH_AUTH_SUCCESS;
                cont=0;
                break;
            case SSH2_MSG_USERAUTH_BANNER:
                {
                    STRING *banner=buffer_get_ssh_string(session->in_buffer);
                    if(!banner){
                        ssh_say(1,"The banner message was invalid. continuing though\n");
                        break;
                    }
                    ssh_say(2,"Received a message banner\n");
                    if(session->banner)
                        free(session->banner); /* erase the older one */
                    session->banner=banner;
                    break;
                }
            default:
                packet_parse(session);
                break;
        }
    }
    leave_function();
    return err;
}
コード例 #14
0
ファイル: auth.c プロジェクト: CUEBoxer/OpenStudio
static int wait_auth_status(ssh_session session, int kbdint) {
  char *auth_methods = NULL;
  ssh_string auth;
  int rc = SSH_AUTH_ERROR;
  int cont = 1;
  uint8_t partial = 0;

  enter_function();

  while (cont) {
    if (packet_read(session) != SSH_OK) {
      break;
    }
    if (packet_translate(session) != SSH_OK) {
      break;
    }

    switch (session->in_packet.type) {
      case SSH2_MSG_USERAUTH_FAILURE:
        auth = buffer_get_ssh_string(session->in_buffer);
        if (auth == NULL || buffer_get_u8(session->in_buffer, &partial) != 1) {
          ssh_set_error(session, SSH_FATAL,
              "Invalid SSH_MSG_USERAUTH_FAILURE message");
          leave_function();
          return SSH_AUTH_ERROR;
        }

        auth_methods = string_to_char(auth);
        if (auth_methods == NULL) {
          ssh_set_error(session, SSH_FATAL,
              "Not enough space");
          string_free(auth);
          leave_function();
          return SSH_AUTH_ERROR;
        }

        if (partial) {
          rc = SSH_AUTH_PARTIAL;
          ssh_set_error(session, SSH_NO_ERROR,
              "Partial success. Authentication that can continue: %s",
              auth_methods);
        } else {
          rc = SSH_AUTH_DENIED;
          ssh_set_error(session, SSH_REQUEST_DENIED,
              "Access denied. Authentication that can continue: %s",
              auth_methods);

          session->auth_methods = 0;
          if (strstr(auth_methods, "password") != NULL) {
            session->auth_methods |= SSH_AUTH_METHOD_PASSWORD;
          }
          if (strstr(auth_methods, "keyboard-interactive") != NULL) {
            session->auth_methods |= SSH_AUTH_METHOD_INTERACTIVE;
          }
          if (strstr(auth_methods, "publickey") != NULL) {
            session->auth_methods |= SSH_AUTH_METHOD_PUBLICKEY;
          }
          if (strstr(auth_methods, "hostbased") != NULL) {
            session->auth_methods |= SSH_AUTH_METHOD_HOSTBASED;
          }
        }

        string_free(auth);
        SAFE_FREE(auth_methods);
        cont = 0;
        break;
      case SSH2_MSG_USERAUTH_PK_OK:
        /* SSH monkeys have defined the same number for both */
        /* SSH_MSG_USERAUTH_PK_OK and SSH_MSG_USERAUTH_INFO_REQUEST */
        /* which is not really smart; */
        /*case SSH2_MSG_USERAUTH_INFO_REQUEST: */
        if (kbdint) {
          rc = SSH_AUTH_INFO;
          cont = 0;
          break;
        }
        /* continue through success */
      case SSH2_MSG_USERAUTH_SUCCESS:
        rc = SSH_AUTH_SUCCESS;
        cont = 0;
        break;
      case SSH2_MSG_USERAUTH_BANNER:
        {
          ssh_string banner;

          banner = buffer_get_ssh_string(session->in_buffer);
          if (banner == NULL) {
            ssh_log(session, SSH_LOG_PACKET,
                "The banner message was invalid. Continuing though\n");
            break;
          }
          ssh_log(session, SSH_LOG_PACKET,
              "Received a message banner\n");
          string_free(session->banner); /* erase the older one */
          session->banner = banner;
          break;
        }
      default:
        packet_parse(session);
        break;
    }
  }

  leave_function();
  return rc;
}
コード例 #15
0
ファイル: session.c プロジェクト: EricSB/dnscat2
NBBOOL session_data_incoming(session_t *session, uint8_t *data, size_t length)
{
  /* Parse the packet to get the session id */
  packet_t *packet = packet_parse(data, length, session->options);

  /* Set to TRUE if data was properly ACKed and we should send more right away. */
  NBBOOL send_right_away = FALSE;

  /* Suck in any data we can from the driver. */
  poll_for_data(session);

  /* Print packet data if we're supposed to. */
  if(packet_trace)
  {
    printf("INCOMING: ");
    packet_print(packet, session->options);
  }

  if(session->is_ping)
  {
    /* This only returns if the receive is bad. */
    driver_data_received(session->driver, (uint8_t*)packet->body.ping.data, strlen(packet->body.ping.data));
  }
  else
  {
    switch(session->state)
    {
      case SESSION_STATE_NEW:
        if(packet->packet_type == PACKET_TYPE_SYN)
        {
          LOG_INFO("In SESSION_STATE_NEW, received SYN (ISN = 0x%04x)", packet->body.syn.seq);
          session->their_seq = packet->body.syn.seq;
          session->options   = (options_t) packet->body.syn.options;
          session->state = SESSION_STATE_ESTABLISHED;

          /* Since we established a valid session, we can send stuff right away. */
          session->last_transmit = 0;
          session->missed_transmissions = 0;
          send_right_away = TRUE;
        }
        else if(packet->packet_type == PACKET_TYPE_MSG)
        {
          LOG_WARNING("In SESSION_STATE_NEW, received unexpected MSG (ignoring)");
        }
        else if(packet->packet_type == PACKET_TYPE_FIN)
        {
          /* TODO: I shouldn't exit here. */
          LOG_FATAL("In SESSION_STATE_NEW, received FIN: %s", packet->body.fin.reason);

          exit(0);
        }
        else
        {
          /* TODO: I shouldn't exit here. */
          LOG_FATAL("Unknown packet type: 0x%02x", packet->packet_type);
          exit(1);
        }

        break;
      case SESSION_STATE_ESTABLISHED:
        if(packet->packet_type == PACKET_TYPE_SYN)
        {
          LOG_WARNING("In SESSION_STATE_ESTABLISHED, recieved SYN (ignoring)");
        }
        else if(packet->packet_type == PACKET_TYPE_MSG)
        {
          LOG_INFO("In SESSION_STATE_ESTABLISHED, received a MSG");

          /* Validate the SEQ */
          if(packet->body.msg.options.normal.seq == session->their_seq)
          {
            /* Verify the ACK is sane */
            uint16_t bytes_acked = packet->body.msg.options.normal.ack - session->my_seq;

            /* If there's still bytes waiting in the buffer.. */
            if(bytes_acked <= buffer_get_remaining_bytes(session->outgoing_buffer))
            {
              /* Since we got a valid response back, the connection isn't dying. */
              session->missed_transmissions = 0;

              /* Reset the retransmit counter since we got some valid data. */
              if(bytes_acked > 0)
              {
                /* Only reset the counter if we want to re-transmit
                 * right away. */
                if(transmit_instantly_on_data)
                {
                  session->last_transmit = 0;
                  session->missed_transmissions = 0;
                  send_right_away = TRUE;
                }
              }

              /* Increment their sequence number */
              session->their_seq = (session->their_seq + packet->body.msg.data_length) & 0xFFFF;

              /* Remove the acknowledged data from the buffer */
              buffer_consume(session->outgoing_buffer, bytes_acked);

              /* Increment my sequence number */
              if(bytes_acked != 0)
              {
                session->my_seq = (session->my_seq + bytes_acked) & 0xFFFF;
              }

              /* Print the data, if we received any, and then immediately receive more. */
              if(packet->body.msg.data_length > 0)
              {
                driver_data_received(session->driver, packet->body.msg.data, packet->body.msg.data_length);
              }
            }
            else
            {
              LOG_WARNING("Bad ACK received (%d bytes acked; %d bytes in the buffer)", bytes_acked, buffer_get_remaining_bytes(session->outgoing_buffer));
            }
          }
          else
          {
            LOG_WARNING("Bad SEQ received (Expected %d, received %d)", session->their_seq, packet->body.msg.options.normal.seq);
          }
        }
        else if(packet->packet_type == PACKET_TYPE_FIN)
        {
          LOG_FATAL("In SESSION_STATE_ESTABLISHED, received FIN: %s - closing session", packet->body.fin.reason);
          session->last_transmit = 0;
          session->missed_transmissions = 0;
          session_kill(session);
        }
        else
        {
          LOG_FATAL("Unknown packet type: 0x%02x - closing session", packet->packet_type);
          session_kill(session);
        }

        break;
      default:
        LOG_FATAL("Wound up in an unknown state: 0x%x", session->state);
        packet_destroy(packet);
        session_kill(session);
        exit(1);
    }
  }

  packet_destroy(packet);

  return send_right_away;
}
コード例 #16
0
int main(int argc, char *argv[])
{
	int ret, len;
	context *pctx;
	input *in;
	char buf[512];
	int send = 0, backgroud = 0, i;

	for (i = 1; i < argc; i++) {
		if (!strcmp(argv[i], "tcp")) {
			send = 1;
		}
		if (!strcmp(argv[i], "deamon")) {
			backgroud = 1;
		}
	}
	if (backgroud)
		daemon_mode();

	pctx = calloc(1, sizeof(context));
	if (pctx == NULL) {
		DBG("error allocating context\n");
		return -ENOMEM;
	}

	if(signal(SIGINT, fatal_signal) == SIG_ERR) {
		DBG("could not register signal handler\n");
		return -EINVAL;
	}

	// create syslog
	openlog("iMX28-UVC", LOG_PID | LOG_CONS, LOG_USER);


	// get params from flash
	ret = params_load();
	if (ret < 0) {
		fprintf(stderr, "load nvram params failed...\n");
	}

	// open manage serial, 1152008N1
	ret = serial_init(NULL);
	if (ret < 0) {
		fprintf(stderr, "serial_init failed\n");
		free(pctx);
		closelog();
		return -1;
	}

	// register input video stream
	ret = input_init(pctx, UVCDEV);
	if (ret < 0) {
		fprintf(stderr, "input_init failed, exit\n");
		goto exit;
        }

	if (send) {
	    // register output video stream
            ret = output_init("192.168.0.99", 5500);	// tcp
	    if (ret < 0 ) {
		goto exit;
	    }
	}
	ret = input_run(pctx);
	if (ret < 0) {
		goto exit;	
	}

	if (send)
		ret = output_run(pctx->in);

	in = pctx->in;
	while (!stop && in) {
		/* save_jpeg(in->buf, in->size); */
		/* allow others to access the global buffer again */
		/* sys_if_test();	 */
		len = recv_packet(buf, sizeof(buf));
		if (len > 0) {
			hex_dump("SP0 RECV:", buf, len);
			packet_parse(pctx, buf, len);
		} 
	}

	/* wait for signals */
	pause();

	if (send)
		output_stop();
exit:
	if (pctx->in->buf)
		free(pctx->in->buf);
	free(pctx);
	closelog();
	serial_exit();
	DBG("%s:Exit\n", __func__);

	return 0;
}