void pagemap_init(void)
{
int i;
/* RC2014 512/512K has RAM in the top 512 KiB of physical memory
* corresponding pages are 32-63 (page size is 16 KiB)
* Pages 32-34 are used by the kernel
* Page 35 is the common area for init
* Page 36 is the disk cache
* Pages 37 amd 38 are the second kernel bank
*/
for (i = 32 + 7; i < 64; i++)
pagemap_add(i);
/* finally add the common area */
pagemap_add(32 + 3);
ds1302_init();
if (acia_present)
kputs("6850 ACIA detected at 0x80.\n");
if (sio_present)
kputs("Z80 SIO detected at 0x80.\n");
if (sio1_present)
kputs("Z80 SIO detected at 0x84.\n");
if (ctc_present)
kputs("Z80 CTC detected at 0x88.\n");
if (ds1302_present)
kputs("DS1302 detected at 0xC0.\n");
}
void pagemap_init(void)
{
int i = msxmaps - 1;
/* Add all the RAM, except 0,1,2,3 which is the kernel data/bss, add 0
last to become the common for init */
while (i > 4)
pagemap_add(i--);
/* Init will pick this up correctly as its common */
pagemap_add(4);
}
void pagemap_init(void)
{
int i;
/* We have 64 8k pages for a CoCo3 so insert every other one
* into the kernel allocator map.
*/
for (i = 10; i < 64; i+=2)
pagemap_add(i);
/* add common page last so init gets it */
pagemap_add(6);
}
void pagemap_init(void)
{
int i;
/* 0/1/2 kernel, 3 initial common, 4+ to use */
for (i = 4; i < 128 ; i++)
pagemap_add(i);
/*
* The kernel boots with 3 as the common, list it last here so it also
* gets given to init as the kernel kicks off the init stub. init will then
* exec preserving this common and all forks will be copies from it.
*/
pagemap_add(3);
}
/* Add pagemap codes depending upon the present banks */
void pagemap_init(void)
{
/* We didn't find any extra page mode memory */
if (bankmap < (2 << 8))
panic("no pagemode");
/* Add the present banks (may be non contiguous). The
first bank is the kernel and not available */
if (bankmap & 2)
pagemap_add(0x22);
if (bankmap & 4)
pagemap_add(0x44);
if (bankmap & 8)
pagemap_add(0x88);
}
void pagemap_init(void)
{
int i;
/* 0/1/2 image, 3/4/5 kernel 6-19 apps */
/* Don't add page 6 yet - it's the initial common at boot */
for (i = 0x80 + 7; i < 0x80 + 20; i++)
pagemap_add(i);
/*
* The kernel boots with 0x86 as the common, list it last here so it also
* gets given to init as the kernel kicks off the init stub. init will then
* exec preserving this common and all forks will be copies from it.
*/
pagemap_add(0x86);
}
void pagemap_init(void)
{
uint8_t n = procmem / 32;
uint8_t *p = map_translate;
uint8_t nv = 0xFF;
uint8_t ct;
uint8_t i;
if (!sidecar && carttype != 2)
panic("No suitable memory extension");
n /= 32;
/* Handle sidecar memory */
if (sidecar) {
nv = n - 4; /* Number of non sidecar blocks (including in RAM) */
ct = 0x83; /* 0x80-0x83 are sidecar maps */
} else
ct = n; /* 1..n are cartridge (1 = in memory) */
for (i = n; i > 0; i--) {
if (i == nv)
ct = nv;
*p++ = ct--;
pagemap_add(i);
}
map_live = p - 1; /* We add RAM last */
}
void pagemap_init(void)
{
int i;
/* ZETA SBC V2 has RAM in the top 512 KiB of physical memory
* corresponding pages are 32-63 (page size is 16 KiB)
* Pages 32-34 are used by the kernel
* Page 35 is the common area
* Pages starting from DEV_RD_START are used by RAM disk
*/
for (i = 32 + 4; i < DEV_RD_START; i++)
pagemap_add(i);
/* finally add the common area */
pagemap_add(32 + 3);
}
/*
Map handling: We have flexible paging. Each map table consists
of a set of pages with the last page repeated to fill any holes.
*/
DISC
void pagemap_init(void)
{
int i;
int max = scanmem();
/* We have 64 8k pages for a CoCo3 so insert every other one
* into the kernel allocator map.
*/
for (i = 12; i < max ; i+=2)
pagemap_add(i);
/* add common page last so init gets it */
pagemap_add(6);
/* initialize swap pages */
for (i = 0; i<MAX_SWAPS; i++)
swapmap_init(i);
}
void pagemap_init(void)
{
/* The high bits do nothing but it's a cheap way to avoid 0x00 */
pagemap_add(0x12);
pagemap_add(0x10);
ds1302_init();
if (sio_present)
kputs("Z80 SIO detected at 0x80.\n");
if (sio1_present)
kputs("Z80 SIO detected at 0x84.\n");
if (ctc_present)
kputs("Z80 CTC detected at 0x88.\n");
if (ds1302_present)
kputs("DS1302 detected at 0xC0.\n");
}
/* Pages 0/1/2/3 are the kernel 4/5 are display and fonts */
void pagemap_init(void)
{
uint8_t maxpages;
uint8_t i;
maxpages = ramsize / 16;
for (i = 6; i < maxpages; i += 2)
pagemap_add(i);
}
void pagemap_init(void)
{
int i;
/* map bank 1 last for init, leave 0 for kernel */
for (i = membanks - 1; i > 0; i--)
pagemap_add(i);
#ifdef SWAPDEV
for (i = 0; i < MAX_SWAPS; i++)
swapmap_add(i);
#endif
}
void pagemap_init(void)
{
/* Really 8K banks 0,1,2,... but we pair them up so we have */
/* 8 x 16 banks numbered 0,2,4,.... , 0 is the kernel, init starts in 2 */
pagemap_add(14);
pagemap_add(12);
pagemap_add(10);
pagemap_add(8);
pagemap_add(6);
pagemap_add(4);
pagemap_add(2);
}
void pagemap_init(void)
{
uint_fast8_t i;
uint_fast8_t m = 2;
for (i = 1; i < 8; i++) {
if (probe_bank(m) == 0) {
pagemap_add(m);
ramsize += 48;
procmem += 48;
}
m <<= 1;
}
if (procmem < 96)
panic("insufficient memory");
}
void pagemap_init(void)
{
int i;
for (i = 1; i < 8; i++)
pagemap_add(i);
}
void pagemap_init(void)
{
/* This is model dependent */
pagemap_add(PAGE_MAP(2));
pagemap_add(PAGE_MAP(3));
#if defined(CONFIG_UB256) || defined(CONFIG_UB512)
pagemap_add(PAGE_MAP(0) | 0x40);
pagemap_add(PAGE_MAP(1) | 0x40);
pagemap_add(PAGE_MAP(2) | 0x40);
pagemap_add(PAGE_MAP(3) | 0x40);
#endif
#if defined(CONFIG_UB256TC) || defined(CONFIG_UB512)
pagemap_add(PAGE_MAP(0) | 0x80);
pagemap_add(PAGE_MAP(1) | 0x80);
pagemap_add(PAGE_MAP(2) | 0x80);
pagemap_add(PAGE_MAP(3) | 0x80);
#endif
#if defined(CONFIG_UB512)
pagemap_add(PAGE_MAP(0) | 0xC0);
pagemap_add(PAGE_MAP(1) | 0xC0);
pagemap_add(PAGE_MAP(2) | 0xC0);
pagemap_add(PAGE_MAP(3) | 0xC0);
#endif
/* and if we ever poke at the 1024 stuff its bit 7-5/1-0 */
}
void pagemap_init(void)
{
int i;
for (i = 1; i < 7; i++)
pagemap_add(1 << i);
}
/*
* Add all the available pages to the list of pages we an use. If this
* is runtime dynamic check to make sure you don't add more than MAX_MAPS
* of them. On some machines with a lot of RAM the implementation turns
* the excess into a RAM disc
*
* The mapping can be logical numbers 1-n, or can be physical values to
* write into registers. Whatever works best. The 0 value is however
* reserved throughout to indicate kernel mode in calls, and also
* to mean swapped out for processes. If your bank 0 is user space you
* might need to just dec/inc before using it in an I/O port or similar
* to avoid confusion.
*
* Kernel in bank 0, user in banks 1-14, high 32K is bank 15
*/
void pagemap_init(void)
{
uint8_t i;
for (i = 1; i < 15; i++)
pagemap_add(i);
}
