/**
* @brief Pads mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output with
* high state.
* @note This function does not alter the @p PINSELx registers. Alternate
* functions setup must be handled by device-specific code.
*
* @param[in] port the port identifier
* @param[in] mask the group mask
* @param[in] mode the mode
*
* @notapi
*/
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
case PAL_MODE_INPUT:
LPC_GPIO_PORT->DIR[port] &= ~mask;
break;
case PAL_MODE_UNCONNECTED:
palSetPort(port, PAL_WHOLE_PORT);
case PAL_MODE_OUTPUT_PUSHPULL:
LPC_GPIO_PORT->DIR[port] |= mask;
break;
}
}
static THD_FUNCTION(Thread1, arg) {
(void)arg;
chRegSetThreadName("blinker");
while (true) {
unsigned i;
for (i = 0; i < 4; i++) {
palClearPad(PORT11, P11_LED1);
chThdSleepMilliseconds(100);
palClearPad(PORT11, P11_LED2);
chThdSleepMilliseconds(100);
palClearPad(PORT11, P11_LED3);
chThdSleepMilliseconds(100);
palClearPad(PORT11, P11_LED4);
chThdSleepMilliseconds(100);
palSetPad(PORT11, P11_LED1);
chThdSleepMilliseconds(100);
palSetPad(PORT11, P11_LED2);
chThdSleepMilliseconds(100);
palSetPad(PORT11, P11_LED3);
chThdSleepMilliseconds(100);
palSetPad(PORT11, P11_LED4);
chThdSleepMilliseconds(300);
}
for (i = 0; i < 4; i++) {
palTogglePad(PORT11, P11_LED1);
chThdSleepMilliseconds(250);
palTogglePad(PORT11, P11_LED1);
palTogglePad(PORT11, P11_LED2);
chThdSleepMilliseconds(250);
palTogglePad(PORT11, P11_LED2);
palTogglePad(PORT11, P11_LED3);
chThdSleepMilliseconds(250);
palTogglePad(PORT11, P11_LED3);
palTogglePad(PORT11, P11_LED4);
chThdSleepMilliseconds(250);
palTogglePad(PORT11, P11_LED4);
}
palSetPort(PORT11,
PAL_PORT_BIT(P11_LED1) | PAL_PORT_BIT(P11_LED2) |
PAL_PORT_BIT(P11_LED3) | PAL_PORT_BIT(P11_LED4));
}
}
static msg_t Thread1(void *arg) {
(void)arg;
chRegSetThreadName("blinker");
while (TRUE) {
unsigned i;
for (i = 0; i < 4; i++) {
palClearPad(PORT_D, PD_LED1);
chThdSleepMilliseconds(100);
palClearPad(PORT_D, PD_LED2);
chThdSleepMilliseconds(100);
palClearPad(PORT_D, PD_LED3);
chThdSleepMilliseconds(100);
palClearPad(PORT_D, PD_LED4);
chThdSleepMilliseconds(100);
palSetPad(PORT_D, PD_LED1);
chThdSleepMilliseconds(100);
palSetPad(PORT_D, PD_LED2);
chThdSleepMilliseconds(100);
palSetPad(PORT_D, PD_LED3);
chThdSleepMilliseconds(100);
palSetPad(PORT_D, PD_LED4);
chThdSleepMilliseconds(300);
}
for (i = 0; i < 4; i++) {
palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
chThdSleepMilliseconds(500);
palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
chThdSleepMilliseconds(500);
}
for (i = 0; i < 4; i++) {
palTogglePad(PORT_D, PD_LED1);
chThdSleepMilliseconds(250);
palTogglePad(PORT_D, PD_LED1);
palTogglePad(PORT_D, PD_LED2);
chThdSleepMilliseconds(250);
palTogglePad(PORT_D, PD_LED2);
palTogglePad(PORT_D, PD_LED3);
chThdSleepMilliseconds(250);
palTogglePad(PORT_D, PD_LED3);
palTogglePad(PORT_D, PD_LED4);
chThdSleepMilliseconds(250);
palTogglePad(PORT_D, PD_LED4);
}
for (i = 0; i < 4; i++) {
palClearPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
palSetPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
chThdSleepMilliseconds(500);
palClearPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
chThdSleepMilliseconds(500);
}
palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
}
return 0;
}
static THD_FUNCTION(Thread1, arg) {
(void)arg;
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
while (true) {
unsigned i;
for (i = 0; i < 4; i++) {
palClearPad(PORT_E, PE_LED1);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED2);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED3);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED4);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED1);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED2);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED3);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED4);
chThdSleepMilliseconds(300);
}
for (i = 0; i < 4; i++) {
palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
}
for (i = 0; i < 4; i++) {
palTogglePad(PORT_E, PE_LED1);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED1);
palTogglePad(PORT_E, PE_LED2);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED2);
palTogglePad(PORT_E, PE_LED3);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED3);
palTogglePad(PORT_E, PE_LED4);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED4);
}
for (i = 0; i < 4; i++) {
palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
chThdSleepMilliseconds(500);
}
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
}
}
static THD_FUNCTION(Thread1, arg) {
(void)arg;
/*
* Activates the serial driver 1 using the driver default configuration.
*/
sdStart(&SD1, NULL);
while (TRUE) {
unsigned i;
chnWriteTimeout(&SD1, (uint8_t *)"Hello World!\r\n", 14, TIME_INFINITE);
for (i = 0; i < 4; i++) {
palClearPad(PORT_E, PE_LED1);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED2);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED3);
chThdSleepMilliseconds(100);
palClearPad(PORT_E, PE_LED4);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED1);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED2);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED3);
chThdSleepMilliseconds(100);
palSetPad(PORT_E, PE_LED4);
chThdSleepMilliseconds(300);
}
for (i = 0; i < 4; i++) {
palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
}
for (i = 0; i < 4; i++) {
palTogglePad(PORT_E, PE_LED1);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED1);
palTogglePad(PORT_E, PE_LED2);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED2);
palTogglePad(PORT_E, PE_LED3);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED3);
palTogglePad(PORT_E, PE_LED4);
chThdSleepMilliseconds(250);
palTogglePad(PORT_E, PE_LED4);
}
for (i = 0; i < 4; i++) {
palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
chThdSleepMilliseconds(500);
palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
chThdSleepMilliseconds(500);
}
palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
}
}
