void smurf_extinction( int * status ) {
/* Local Variables */
smfArray *bbms = NULL; /* Bad bolometer masks */
smfArray *darks = NULL; /* Dark data */
AstKeyMap *extpars = NULL; /* Tau relation keymap */
Grp *fgrp = NULL; /* Filtered group, no darks */
smfArray *flatramps = NULL;/* Flatfield ramps */
int has_been_sky_removed = 0;/* Data are sky-removed */
AstKeyMap *heateffmap = NULL; /* Heater efficiency data */
size_t i; /* Loop counter */
Grp *igrp = NULL; /* Input group */
AstKeyMap *keymap=NULL; /* Keymap for storing parameters */
smf_tausrc tausrc; /* enum value of optical depth source */
smf_extmeth extmeth; /* Extinction correction method */
char tausource[LEN__METHOD]; /* String for optical depth source */
char method[LEN__METHOD]; /* String for extinction airmass method */
smfData *odata = NULL; /* Output data struct */
Grp *ogrp = NULL; /* Output group */
size_t outsize; /* Total number of NDF names in the output group */
size_t size; /* Number of files in input group */
double tau = 0.0; /* Zenith tau at this wavelength */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
if (*status != SAI__OK) return;
/* Main routine */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Read the input file */
kpg1Rgndf( "IN", 0, 1, "", &igrp, &size, status );
/* Filter out darks */
smf_find_science( igrp, &fgrp, 0, NULL, NULL, 1, 1, SMF__NULL, &darks,
&flatramps, &heateffmap, NULL, status );
/* input group is now the filtered group so we can use that and
free the old input group */
size = grpGrpsz( fgrp, status );
grpDelet( &igrp, status);
igrp = fgrp;
fgrp = NULL;
if (size > 0) {
/* Get output file(s) */
kpg1Wgndf( "OUT", igrp, size, size, "More output files required...",
&ogrp, &outsize, status );
} else {
msgOutif(MSG__NORM, " ","All supplied input frames were DARK,"
" nothing to extinction correct", status );
}
/* Get group of pixel masks and read them into a smfArray */
smf_request_mask( "BBM", &bbms, status );
/* Read the tau relations from config file or group. We do not
allow sub instrument overloading because these are all values
based on filter name. */
keymap = kpg1Config( "TAUREL", "$SMURF_DIR/smurf_extinction.def", NULL,
1, status );
/* and we need to use the EXT entry */
astMapGet0A( keymap, "EXT", &extpars );
keymap = astAnnul( keymap );
/* Get tau source */
parChoic( "TAUSRC", "Auto",
"Auto,CSOtau,CSOFit, Filtertau, WVMraw", 1,
tausource, sizeof(tausource), status);
/* Decide how the correction is to be applied - convert to flag */
parChoic( "METHOD", "ADAPTIVE",
"Adaptive,Quick,Full,", 1, method, sizeof(method), status);
/* Place parameters into a keymap and extract values */
if( *status == SAI__OK ) {
keymap = astKeyMap( " " );
if( astOK ) {
astMapPut0C( keymap, "TAUSRC", tausource, NULL );
astMapPut0C( keymap, "TAUMETHOD", method, NULL );
smf_get_extpar( keymap, &tausrc, &extmeth, NULL, status );
}
}
for (i=1; i<=size && ( *status == SAI__OK ); i++) {
/* Flatfield - if necessary */
smf_open_and_flatfield( igrp, ogrp, i, darks, flatramps, heateffmap,
&odata, status );
if (*status != SAI__OK) {
/* Error flatfielding: tell the user which file it was */
msgSeti("I",i);
errRep(TASK_NAME, "Unable to open the ^I th file", status);
}
/* Mask out bad pixels - mask data array not quality array */
smf_apply_mask( odata, bbms, SMF__BBM_DATA, 0, status );
/* Now check that the data are sky-subtracted */
if ( !smf_history_check( odata, "smf_subtract_plane", status ) ) {
/* Should we override remsky check? */
parGet0l("HASSKYREM", &has_been_sky_removed, status);
if ( !has_been_sky_removed && *status == SAI__OK ) {
*status = SAI__ERROR;
msgSeti("I",i);
errRep("", "Input data from file ^I are not sky-subtracted", status);
}
}
/* If status is OK, make decisions on source keywords the first
time through. */
if ( *status == SAI__OK && i == 1 ) {
if (tausrc == SMF__TAUSRC_CSOTAU ||
tausrc == SMF__TAUSRC_AUTO ||
tausrc == SMF__TAUSRC_TAU) {
double deftau;
const char * param = NULL;
smfHead *ohdr = odata->hdr;
/* get default CSO tau -- this could be calculated from CSO fits */
deftau = smf_calc_meantau( ohdr, status );
/* Now ask for desired CSO tau */
if ( tausrc == SMF__TAUSRC_CSOTAU || tausrc == SMF__TAUSRC_AUTO) {
param = "CSOTAU";
} else if (tausrc == SMF__TAUSRC_TAU) {
param = "FILTERTAU";
deftau = smf_cso2filt_tau( ohdr, deftau, extpars, status );
}
parGdr0d( param, deftau, 0.0,1.0, 1, &tau, status );
} else if ( tausrc == SMF__TAUSRC_CSOFIT || tausrc == SMF__TAUSRC_WVMRAW ) {
/* Defer a message until after extinction correction */
} else {
*status = SAI__ERROR;
errRep("", "Unsupported opacity source. Possible programming error.",
status);
}
}
/* Apply extinction correction - note that a check is made to
determine whether the data have already been extinction
corrected */
smf_correct_extinction( wf, odata, &tausrc, extmeth, extpars, tau, NULL, NULL, status );
if ( tausrc == SMF__TAUSRC_WVMRAW ) {
msgOutif(MSG__VERB," ", "Used Raw WVM data for extinction correction", status);
} else if ( tausrc == SMF__TAUSRC_CSOFIT ) {
msgOutif(MSG__VERB," ", "Used fit to CSO data for extinction correction", status);
} else if ( tausrc == SMF__TAUSRC_CSOTAU ) {
msgOutif(MSG__VERB," ", "Used an explicit CSO tau value for extinction correction", status);
} else if ( tausrc == SMF__TAUSRC_TAU ) {
msgOutif(MSG__VERB," ", "Used an explicit filter tau value for extinction correction", status);
} else {
if (*status == SAI__OK) {
const char * taustr = smf_tausrc_str( tausrc, status );
*status = SAI__ERROR;
errRepf( "", "Unexpected opacity source used for extinction correction of %s."
" Possible programming error.", status, taustr );
}
}
/* Set character labels */
smf_set_clabels( "Extinction corrected",NULL, NULL, odata->hdr, status);
smf_write_clabels( odata, status );
/* Free resources for output data */
smf_close_file( &odata, status );
}
/* Write out the list of output NDF names, annulling the error if a null
parameter value is supplied. */
if( *status == SAI__OK && ogrp ) {
grpList( "OUTFILES", 0, 0, NULL, ogrp, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Tidy up after ourselves: release the resources used by the grp routines */
if (darks) smf_close_related( &darks, status );
if (bbms) smf_close_related( &bbms, status );
if( flatramps ) smf_close_related( &flatramps, status );
if (heateffmap) heateffmap = smf_free_effmap( heateffmap, status );
grpDelet( &igrp, status);
grpDelet( &ogrp, status);
if( keymap ) keymap = astAnnul( keymap );
if (extpars) extpars = astAnnul( extpars );
ndfEnd( status );
}
void smurf_unmakecube( int *status ) {
/* Local Variables */
AstFrame *tfrm = NULL; /* Current Frame from input WCS */
AstFrameSet *wcsin = NULL; /* WCS Frameset for input cube */
AstMapping *tmap = NULL; /* Base->current Mapping from input WCS */
AstSkyFrame *iskyfrm = NULL; /* SkyFrame from the input WCS Frameset */
Grp *detgrp = NULL; /* Group of detector names */
Grp *igrp1 = NULL; /* Group of input sky cube files */
Grp *igrp2 = NULL; /* Group of input template files */
Grp *ogrp = NULL; /* Group containing output file */
NdgProvenance *oprov = NULL;/* Provenance for the output NDF */
SkyCube *sky_cubes = NULL; /* Pointer to array of sky cube descriptions */
SkyCube *skycube = NULL; /* Pointer to next sky cube description */
char pabuf[ 10 ]; /* Text buffer for parameter value */
double params[ 4 ]; /* astResample parameters */
int axes[ 2 ]; /* Indices of selected axes */
int blank; /* Was a blank line just output? */
int flag; /* Was the group expression flagged? */
int ifile; /* Input file index */
int interp = 0; /* Pixel interpolation method */
int iskycube; /* Index of current sky cube */
int nel; /* Number of elements in 3D array */
int nparam = 0; /* No. of parameters required for interpolation scheme */
int ondf; /* Output time series NDF identifier */
int outax[ 2 ]; /* Indices of corresponding output axes */
int overlap; /* Does time series overlap sky cube? */
int sdim[3]; /* Array of significant pixel axes */
int usedetpos; /* Should the detpos array be used? */
size_t ndet; /* Number of detectors supplied for "DETECTORS" */
size_t nskycube; /* Number of supplied sky cubes */
size_t outsize; /* Number of files in output group */
size_t size; /* Number of files in input group */
smfData *data = NULL; /* Pointer to data struct */
void *in_data = NULL; /* Pointer to the input cube data array */
void *out_data = NULL; /* Pointer to the output cube data array */
#if defined(FPTRAP)
feenableexcept(FE_DIVBYZERO|FE_INVALID|FE_OVERFLOW);
#endif
/* Check inherited status */
if( *status != SAI__OK ) return;
/* We have not yet displayed a blank line on stdout. */
blank = 0;
/* Begin an AST context */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Get a group holding the input sky cubes. */
kpg1Rgndf( "IN", 0, 1, "", &igrp1, &nskycube, status );
/* Create an array of structures to hold information about each input sky
cube. */
sky_cubes = astMalloc( sizeof( SkyCube )*(size_t) nskycube );
/* Store a description of each sky cube. */
if( sky_cubes ) {
for( iskycube = 0; iskycube < nskycube; iskycube++ ) {
skycube = sky_cubes + iskycube;
/* Get an NDF identifier for the next sky cube. */
ndgNdfas( igrp1, iskycube + 1, "READ", &(skycube->indf), status );
/* Get the WCS FrameSet from the sky cube, together with its pixel index
bounds. */
kpg1Asget( skycube->indf, 3, 0, 1, 1, sdim, skycube->slbnd,
skycube->subnd, &wcsin, status );
/* Get the base->current Mapping from the input WCS FrameSet, and split it
into two Mappings; one (iskymap) that maps the first 2 GRID axes into
celestial sky coordinates, and one (ispecmap) that maps the third GRID
axis into a spectral coordinate. Also extract the SpecFrame and
SkyFrame from the current Frame. */
tmap = astGetMapping( wcsin, AST__BASE, AST__CURRENT );
tfrm = astGetFrame( wcsin, AST__CURRENT );
axes[ 0 ] = 1;
axes[ 1 ] = 2;
astMapSplit( tmap, 2, axes, outax, &(skycube->iskymap) );
iskyfrm = astPickAxes( tfrm, 2, outax, NULL );
axes[ 0 ] = 3;
astMapSplit( tmap, 1, axes, outax, &(skycube->ispecmap) );
skycube->ispecfrm = astPickAxes( tfrm, 1, outax, NULL );
/* Create a copy of "iskyfrm" representing absolute coords rather than
offsets. We assume the target is moving if the cube represents offsets. */
skycube->abskyfrm = astCopy( iskyfrm );
astClear( skycube->abskyfrm, "SkyRefIs" );
skycube->moving = ( *status == SAI__OK &&
!strcmp( astGetC( iskyfrm, "SkyRefIs" ),
"Origin" ) ) ? 1 : 0;
/* Invert the Mappings (for the convenience of smf_resamplecube), so
that they go from current Frame to grid axis. */
astInvert( skycube->ispecmap );
astInvert( skycube->iskymap );
/* For efficiency, annul manually the unneeded AST objects created in
this loop. */
wcsin = astAnnul( wcsin );
tmap = astAnnul( tmap );
tfrm = astAnnul( tfrm );
iskyfrm = astAnnul( iskyfrm );
}
}
/* See if the detector positions are to be read from the RECEPPOS array
in the template NDFs. Otherwise, they are calculated on the basis of
the FPLANEX/Y arrays. */
parGet0l( "USEDETPOS", &usedetpos, status );
/* Get the detectors to use. If a null value is supplied, annull the
error. Otherwise, make the group case insensitive. */
detgrp = NULL;
if( *status == SAI__OK ) {
kpg1Gtgrp( "DETECTORS", &detgrp, &ndet, status );
if( *status == PAR__NULL ) {
errAnnul( status );
if (detgrp) {
grpDelet( &detgrp, status );
}
} else {
grpSetcs( detgrp, 0, status );
}
}
/* Get the pixel interpolation scheme to use. */
parChoic( "INTERP", "NEAREST", "NEAREST,LINEAR,SINC,"
"SINCSINC,SINCCOS,SINCGAUSS,SOMB,SOMBCOS",
1, pabuf, 10, status );
if( !strcmp( pabuf, "NEAREST" ) ) {
interp = AST__NEAREST;
nparam = 0;
} else if( !strcmp( pabuf, "LINEAR" ) ) {
interp = AST__LINEAR;
nparam = 0;
} else if( !strcmp( pabuf, "SINC" ) ) {
interp = AST__SINC;
nparam = 1;
} else if( !strcmp( pabuf, "SINCSINC" ) ) {
interp = AST__SINCSINC;
nparam = 2;
} else if( !strcmp( pabuf, "SINCCOS" ) ) {
interp = AST__SINCCOS;
nparam = 2;
} else if( !strcmp( pabuf, "SINCGAUSS" ) ) {
interp = AST__SINCGAUSS;
nparam = 2;
} else if( !strcmp( pabuf, "SOMB" ) ) {
interp = AST__SOMB;
nparam = 1;
} else if( !strcmp( pabuf, "SOMBCOS" ) ) {
interp = AST__SOMBCOS;
nparam = 2;
} else if( *status == SAI__OK ) {
nparam = 0;
*status = SAI__ERROR;
msgSetc( "V", pabuf );
errRep( "", "Support not available for INTERP = ^V (programming "
"error)", status );
}
/* Get an additional parameter vector if required. */
if( nparam > 0 ) parExacd( "PARAMS", nparam, params, status );
/* Get a group of reference time series files to use as templates for
the output time series files.*/
ndgAssoc( "REF", 1, &igrp2, &size, &flag, status );
/* Create a group holding the names of the corresponding output NDFs. */
ndgCreat ( "OUT", igrp2, &ogrp, &outsize, &flag, status );
if( outsize != size && *status == SAI__OK ) {
*status = SAI__ERROR;
msgSeti( "O", outsize );
msgSeti( "I", size );
errRep( "", "Numbers of input reference cubes (^I) and output "
"cubes (^O) differ.", status );
}
/* Loop round all the template time series files. */
for( ifile = 1; ifile <= size && *status == SAI__OK; ifile++ ) {
/* Start a new NDF context. */
ndfBegin();
/* Obtain information about the current template NDF, but do not map the
arrays. */
smf_open_file( igrp2, ifile, "READ", SMF__NOCREATE_DATA, &data, status );
/* Issue a suitable message and abort if anything went wrong. */
if( *status != SAI__OK ) {
errRep( FUNC_NAME, "Could not open input template file.", status );
break;
} else {
if( data->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( data->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
}
}
/* Report the name of the input template. */
smf_smfFile_msg( data->file, "FILE", 1, "<unknown>" );
msgSeti( "THISFILE", ifile );
msgSeti( "NUMFILES", size );
msgOutif( MSG__NORM, " ", "Simulating ^THISFILE/^NUMFILES ^FILE",
status );
/* Create the output NDF by propagation from the input template NDF.
Everything is copied except for the array components and any PROVENANCE
extension. */
ndgNdfpr( data->file->ndfid, "TITLE,LABEL,UNITS,AXIS,WCS,HISTORY,"
"NOEXTENSION(PROVENANCE)", ogrp, ifile, &ondf, status );
/* Ensure the output NDF has a history component. */
ndfHcre( ondf, status );
/* Get a pointer to the mapped output data array. Set all values bad. */
ndfMap( ondf, "DATA", "_REAL", "WRITE/BAD", &out_data, &nel, status );
/* If the detector positions are to calculated on the basis of FPLANEX/Y
rather than detpos, then free the detpos array in the templates smfHead
structure. This will cause smf_tslice_ast to use the fplanex/y values. */
if( !usedetpos && data->hdr->detpos ) {
astFree( (double *) data->hdr->detpos );
data->hdr->detpos = NULL;
}
/* Get a pointer to a structure holding provenance information for the
output time series. */
oprov = ndgReadProv( ondf, "SMURF:UNMAKECUBE", status );
/* Record details of the template in the provenance structure for the
output time series. */
ndgPutProv( oprov, data->file->ndfid, NULL, 0, status );
/* Loop round all input sky cubes. */
for( iskycube = 0; iskycube < nskycube; iskycube++ ) {
skycube = sky_cubes + iskycube;
/* Record details of the input cube in the provenance extension of the
output time series. */
ndgPutProv( oprov, skycube->indf, NULL, 0, status );
/* See if the current time series overlaps the current sky cube. */
smf_resampcube( data, skycube->abskyfrm,
skycube->iskymap, skycube->ispecfrm,
skycube->ispecmap, detgrp, skycube->moving,
skycube->slbnd, skycube->subnd, interp,
params, NULL, NULL, &overlap, status );
/* If not, pass on to the next sky cube. */
if( overlap ) {
/* Report the name of the sky cube. */
ndfMsg( "NDF", skycube->indf );
msgOutif( MSG__NORM, " ", " Re-sampling ^NDF", status );
/* Map the data array in the current sky cube. */
ndfMap( skycube->indf, "DATA", "_REAL", "READ", &in_data, &nel,
status );
/* Resample the cube data into the output time series. */
smf_resampcube( data, skycube->abskyfrm,
skycube->iskymap, skycube->ispecfrm,
skycube->ispecmap, detgrp, skycube->moving,
skycube->slbnd, skycube->subnd, interp,
params, in_data, out_data, &overlap, status );
/* Unmap the data array. */
ndfUnmap( skycube->indf, "DATA", status );
}
}
/* Write the provenance structure to the output NDF, and then free it. */
ndgWriteProv( oprov, ondf, 1, status );
oprov =ndgFreeProv( oprov, status );
/* Close the input time series file. */
if( data != NULL ) {
smf_close_file( &data, status );
data = NULL;
}
/* End the NDF context. */
ndfEnd( status );
}
/* Close any input data file that is still open due to an early exit from
the above loop. */
if( data != NULL ) {
smf_close_file( &data, status );
data = NULL;
}
/* Free remaining resources. */
if( detgrp != NULL) grpDelet( &detgrp, status);
if( igrp1 != NULL) grpDelet( &igrp1, status);
if( igrp2 != NULL) grpDelet( &igrp2, status);
if( ogrp != NULL) grpDelet( &ogrp, status);
sky_cubes = astFree( sky_cubes );
/* End the NDF context. */
ndfEnd( status );
/* End the tile's AST context. */
astEnd;
/* Issue a status indication.*/
if( *status == SAI__OK ) {
msgOutif(MSG__VERB," ",TASK_NAME " succeeded, time series written.", status);
} else {
msgOutif(MSG__VERB," ",TASK_NAME " failed.", status);
}
}
void
smf_flat_params( const smfData * refdata, const char resistpar[],
const char methpar[], const char orderpar[], const char snrminpar[],
double * refohms, double **resistance, int * outrows,
int * outcols, smf_flatmeth *flatmeth,
int * order, double * snrmin, smfData ** heateff,
int * status ) {
dim_t datarows = 0; /* Number of rows in refdata */
dim_t datacols = 0; /* Number of columns in refdata */
size_t j = 0; /* Counter, index */
char method[SC2STORE_FLATLEN]; /* flatfield method string */
size_t nbols; /* Number of bolometers */
double refohmsval = 0.0; /* Internal version of refohms */
AstKeyMap * resmap = NULL; /* Resistor map */
AstKeyMap * subarrays = NULL; /* Subarray lookup table */
char thissub[32]; /* This sub-instrument string */
if (resistance) *resistance = NULL;
if (*status != SAI__OK) return;
if (!refdata) {
*status = SAI__ERROR;
errRep( "", "Must provide reference data file to calculate flatfield parameters"
" (possible programming error)", status );
return;
}
/* Based on refdata we now need to calculate the default reference
resistance and retrieve the correct heater efficiency file for each array.
We need the unique subarray string so that we can set up a look up keymap.
There is no code in SMURF to return all the known subarrays but
we need to know all the options in order to use kpg1Config. */
subarrays = astKeyMap( " " );
astMapPut0I( subarrays, "CG450MK2_M0907D0501", 0, NULL );
astMapPut0I( subarrays, "CG850MK2_M0904D0503", 0, NULL );
astMapPut0I( subarrays, "SG850_M0906D1005", 0, NULL );
astMapPut0I( subarrays, "SG850_M1002D1006", 0, NULL );
astMapPut0I( subarrays, "SG850_M1005D1007", 0, NULL );
astMapPut0I( subarrays, "SG850_M1003D1004", 0, NULL );
astMapPut0I( subarrays, "SG450_M1004D1000", 0, NULL );
astMapPut0I( subarrays, "SG450_M1007D1002", 0, NULL );
astMapPut0I( subarrays, "SG450_M1006D1003", 0, NULL );
astMapPut0I( subarrays, "SG450_M1009D1008", 0, NULL );
/* and indicate which subarray we are interested in (uppercased) */
smf_fits_getS( refdata->hdr, "ARRAYID", thissub, sizeof(thissub), status );
{ /* need to uppercase */
size_t l = strlen(thissub);
for (j=0;j<l;j++) {
thissub[j] = toupper(thissub[j]);
}
}
astMapPut0I( subarrays, thissub, 1, NULL );
/* Read the config file */
resmap = kpg1Config( resistpar, "$SMURF_DIR/smurf_calcflat.def",
subarrays, 1, status );
subarrays = astAnnul( subarrays );
if (*status != SAI__OK) goto CLEANUP;
/* Read the reference resistance */
astMapGet0D( resmap, "REFRES", &refohmsval );
if (refohms && *status == SAI__OK) {
*refohms = refohmsval;
msgOutiff(MSG__VERB, "",
"Read reference resistance for subarray %s of %g ohms\n",
status, thissub, *refohms );
}
/* We no longer want to read per-bolometer resistor values from the
config file. To retain backwards compatibility with the current
implementation of smf_flat_standardpow we simply fill the
per-bol resistance array with the reference resistance which
effectively disables smf_flat_standardpow */
smf_get_dims( refdata, &datarows, &datacols, NULL, NULL, NULL, NULL, NULL, status );
nbols = datacols * datarows;
if (*status == SAI__OK && resistance ) {
*resistance = astMalloc( nbols*sizeof(**resistance) );
for (j = 0; j < (size_t)nbols; j++) {
(*resistance)[j] = refohmsval;
}
}
/* Get the heater efficiency file */
if (heateff && astMapHasKey( resmap, "HEATEFF" ) ) {
const char * heateffstr = NULL;
if (astMapGet0C( resmap, "HEATEFF", &heateffstr )) {
Grp * heateffgrp = NULL;
smfData * heatefftmp = NULL;
heateffgrp = grpNew( "heateff", status );
grpPut1( heateffgrp, heateffstr, 0, status );
smf_open_file( NULL, heateffgrp, 1, "READ", SMF__NOTTSERIES|SMF__NOFIX_METADATA, &heatefftmp, status );
/* Divorce the smfData from the underlying file. This file stays open for the entire
duration of the data processing and can some times lead to issues when we attempt
to close it an hour after we opened it (it's usually on an NFS disk) */
if (*status == SAI__OK) {
*heateff = smf_deepcopy_smfData( NULL, heatefftmp, 0,
SMF__NOCREATE_FILE | SMF__NOCREATE_FTS |
SMF__NOCREATE_DA,
0, 0, status );
smf_close_file(NULL, &heatefftmp, status);
}
/* Check the dimensions */
if (*status == SAI__OK) {
dim_t heatrows = 0;
dim_t heatcols = 0;
smf_get_dims( *heateff, &heatrows, &heatcols, NULL, NULL, NULL, NULL, NULL, status );
if (*status == SAI__OK) {
if ( datarows != heatrows || datacols != heatcols ) {
*status = SAI__ERROR;
errRepf( "", "Dimensions of heater efficiency file %s are (%zu, %zu)"
" but flatfield has dimensions (%zu, %zu)",
status, heateffstr, (size_t)heatrows, (size_t)heatcols,
(size_t)datarows, (size_t)datacols);
}
}
if (*status == SAI__OK) {
smf_dtype_check_fatal( *heateff, NULL, SMF__DOUBLE, status );
if (*status == SMF__BDTYP) {
errRepf("", "Heater efficiency data in %s should be double precision",
status, heateffstr);
}
}
if (*status == SAI__OK) {
char heateffarrid[32];
smf_fits_getS( refdata->hdr, "ARRAYID", heateffarrid, sizeof(heateffarrid), status );
if (*status != SAI__OK) errAnnul( status );
if (strcasecmp( thissub, heateffarrid ) != 0 ) {
if (*status == SAI__OK) {
*status = SAI__ERROR;
errRepf("", "Subarray associated with heater efficiency image (%s)"
" does not match that of the data to be flatfielded (%s)",
status, heateffarrid, thissub );
}
}
}
}
if (heateffgrp) grpDelet( &heateffgrp, status );
}
}
if (methpar && flatmeth) {
/* See if we want to use TABLE or POLYNOMIAL mode */
parChoic( methpar, "POLYNOMIAL", "POLYNOMIAL, TABLE", 1,
method, sizeof(method), status );
*flatmeth = smf_flat_methcode( method, status );
if (*flatmeth == SMF__FLATMETH_POLY) {
/* need an order for the polynomial */
if (order && orderpar) {
parGdr0i( orderpar, 1, 1, 3, 1, order, status );
/* and if the order is 1 then we can ask for the snr min */
if (snrminpar && *order == 1) {
parGet0d( snrminpar, snrmin, status );
}
}
} else {
/* need an snr min for table mode responsivities */
if (snrminpar) parGet0d( snrminpar, snrmin, status );
}
}
if (outrows) *outrows = datarows;
if (outcols) *outcols = datacols;
CLEANUP:
resmap = astAnnul( resmap );
if (*status != SAI__OK) {
if (resistance && *resistance) *resistance = astFree( *resistance );
if (heateff && *heateff) smf_close_file( NULL, heateff, status );
}
return;
}
void smurf_jsatileinfo( int *status ) {
/* Local Variables */
AstCmpRegion *overlap;
AstFitsChan *fc;
AstFrameSet *fs;
AstObject *obj;
AstRegion *region;
AstRegion *target;
HDSLoc *cloc = NULL;
HDSLoc *xloc = NULL;
char *jcmt_tiles;
char *tilendf = NULL;
char text[ 200 ];
double dec[ 8 ];
double dist;
double dlbnd[ 2 ];
double dubnd[ 2 ];
double gx[ 8 ];
double gy[ 8 ];
double maxdist;
double norm_radec[2];
double point1[ 2 ];
double point2[ 2 ];
double ra[ 8 ];
double ra0;
double dec0;
int *ipntr;
int axes[ 2 ];
int create;
int dirlen;
int el;
int exists;
int flag;
int i;
int indf1;
int indf2;
int indf3;
int itile;
int iv;
int jtile;
int lbnd[ 2 ];
int local_origin;
int nc;
int place;
int tlbnd[ 2 ];
int tubnd[ 2 ];
int ubnd[ 2 ];
smf_jsaproj_t proj;
int xt;
int yt;
smfJSATiling skytiling;
void *pntr;
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Start a new AST context. */
astBegin;
/* Get the instrument to use abnd get the parameters describing the
layout of its JSA tiles. */
smf_jsainstrument( "INSTRUMENT", NULL, SMF__INST_NONE, &skytiling,
status );
/* Return the maximum tile index. */
parPut0i( "MAXTILE", skytiling.ntiles - 1, status );
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Decide what sort of projection to use. */
parChoic( "PROJ", "HPX", "HPX,HPX12,XPHN,XPHS", 1, text, sizeof(text),
status );
proj = smf_jsaproj_fromstr( text, 1, status );
/* If required, create an all-sky NDF in which each pixel covers the area
of a single tile, and holds the integer tile index. The NDF has an
initial size of 1x1 pixels, but is expanded later to the required size. */
lbnd[ 0 ] = ubnd[ 0 ] = lbnd[ 1 ] = ubnd[ 1 ] = 1;
ndfCreat( "ALLSKY", "_INTEGER", 2, lbnd, ubnd, &indf3, status );
/* If a null (!) value was supplied for parameter ALLSKY, annull the
error and pass on. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, create a FrameSet describing the whole sky in which each
pixel corresponds to a single tile. */
} else {
smf_jsatile( -1, &skytiling, 0, proj, NULL, &fs, NULL, lbnd, ubnd,
status );
/* Change the bounds of the output NDF. */
ndfSbnd( 2, lbnd, ubnd, indf3, status );
/* Store the FrameSet in the NDF. */
ndfPtwcs( fs, indf3, status );
/* Map the data array. */
ndfMap( indf3, "Data", "_INTEGER", "WRITE/BAD", (void **) &ipntr, &el,
status );
/* Create all-sky map using XPH projection. */
if( *status == SAI__OK ) {
/* Loop round every tile index. */
for( jtile = 0; jtile < skytiling.ntiles; jtile++ ) {
/* Get the zero-based (x,y) indices of the tile within an HPX projection.
This flips the bottom left half-facet up to the top right. */
smf_jsatilei2xy( jtile, &skytiling, &xt, &yt, NULL, status );
/* Convert these HPX indices to the corresponding indices within the
required projection. Note, the lower left facet is split by the above
call to smf_jsatilei2xy tile (i.e. (xt,yt) indices are *not* in the
"raw" mode). For instance, (0,0) is not a valid tile. */
smf_jsatilexyconv( &skytiling, proj, xt, yt, 0, &xt, &yt, status );
/* Get the vector index of the corresponding element of the all-sky NDF. */
if( proj == SMF__JSA_HPX || proj == SMF__JSA_HPX12 ) {
iv = xt + 5*skytiling.ntpf*yt;
} else {
iv = xt + 4*skytiling.ntpf*yt;
}
/* Report an error if this element has already been assigned a tile
index. Otherwise, store the tile index. */
if( ipntr[ iv ] == VAL__BADI ) {
ipntr[ iv ] = jtile;
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
errRepf( "", "%s projection assigns multiple tiles to "
"pixel (%d,%d).", status, text, xt, yt );
break;
}
}
}
/* Store NDF title. */
sprintf( text, "JSA tile indices for %s data", skytiling.name );
ndfCput( text, indf3, "TITLE", status );
/* Store the instrument as a component in the SMURF extension. */
ndfXnew( indf3, "SMURF", "INSTRUMENT", 0, 0, &xloc, status );
ndfXpt0c( skytiling.name, indf3, "SMURF", "INSTRUMENT", status );
datAnnul( &xloc, status );
/* Close the NDF. */
ndfAnnul( &indf3, status );
}
/* Abort if an error has occurred. */
if( *status != SAI__OK ) goto L999;
/* Get the zero-based index of the required tile. If a null value is
supplied, annull the error and skip to the end. */
parGdr0i( "ITILE", 0, 0, skytiling.ntiles - 1, 0, &itile, status );
if( *status == PAR__NULL ) {
errAnnul( status );
goto L999;
}
/* See if the pixel origin is to be at the centre of the tile. */
parGet0l( "LOCAL", &local_origin, status );
/* Display the tile number. */
msgBlank( status );
msgSeti( "ITILE", itile );
msgSeti( "MAXTILE", skytiling.ntiles - 1);
msgOut( " ", " Tile ^ITILE (from 0 to ^MAXTILE):", status );
/* Get the FITS header, FrameSet and Region defining the tile, and the tile
bounds in pixel indices. */
smf_jsatile( itile, &skytiling, local_origin, proj, &fc, &fs, ®ion,
lbnd, ubnd, status );
/* Write the FITS headers out to a file, annulling the error if the
header is not required. */
if( *status == SAI__OK ) {
atlDumpFits( "HEADER", fc, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* If required, write the Region out to a text file. */
if( *status == SAI__OK ) {
atlCreat( "REGION", (AstObject *) region, status );
if( *status == PAR__NULL ) errAnnul( status );
}
/* Store the lower and upper pixel bounds of the tile. */
parPut1i( "LBND", 2, lbnd, status );
parPut1i( "UBND", 2, ubnd, status );
/* Display pixel bounds on the screen. */
msgSeti( "XL", lbnd[ 0 ] );
msgSeti( "XU", ubnd[ 0 ] );
msgSeti( "YL", lbnd[ 1 ] );
msgSeti( "YU", ubnd[ 1 ] );
msgOut( " ", " Pixel bounds: (^XL:^XU,^YL:^YU)", status );
/* Get the RA,Dec at the tile centre. */
if( astTest( fs, "SkyRef" ) ) {
ra0 = astGetD( fs, "SkyRef(1)" );
dec0 = astGetD( fs, "SkyRef(2)" );
/* Format the central RA and Dec. and display. Call astNorm on the
coordinates provided that the frame set has the correct number of
axes (which it should as it comes from smf_jsatile). */
norm_radec[0] = ra0;
norm_radec[1] = dec0;
if (astGetI(fs, "Naxes") == 2) astNorm(fs, norm_radec);
msgSetc( "RACEN", astFormat( fs, 1, norm_radec[ 0 ] ));
msgSetc( "DECCEN", astFormat( fs, 2, norm_radec[ 1 ] ));
msgOut( " ", " Centre (ICRS): RA=^RACEN DEC=^DECCEN", status );
/* Transform a collection of points on the edge of the region (corners and
side mid-points) from GRID coords to RA,Dec. */
point1[ 0 ] = 0.5;
point1[ 1 ] = 0.5;
point2[ 0 ] = ubnd[ 0 ] - lbnd[ 0 ] + 1;
point2[ 1 ] = ubnd[ 1 ] - lbnd[ 1 ] + 1;
gx[ 0 ] = point1[ 0 ]; /* Bottom left */
gy[ 0 ] = point1[ 1 ];
gx[ 1 ] = point1[ 0 ]; /* Centre left */
gy[ 1 ] = gy[ 0 ];
gx[ 2 ] = point1[ 0 ]; /* Top left */
gy[ 2 ] = point2[ 1 ];
gx[ 3 ] = gx[ 0 ]; /* Top centre */
gy[ 3 ] = point2[ 1 ];
gx[ 4 ] = point2[ 0 ]; /* Top right */
gy[ 4 ] = point2[ 1 ];
gx[ 5 ] = point2[ 0 ]; /* Centre right */
gy[ 5 ] = gy[ 0 ];
gx[ 6 ] = point2[ 0 ]; /* Bottom right */
gy[ 6 ] = point1[ 1 ];
gx[ 7 ] = gx[ 0 ]; /* Bottom centre */
gy[ 7 ] = point1[ 1 ];
astTran2( fs, 8, gx, gy, 1, ra, dec );
/* Find the arc-distance from the centre to the furthest point from the
centre. */
point1[ 0 ] = ra0;
point1[ 1 ] = dec0;
maxdist = -1.0;
for( i = 1; i < 8; i++ ) {
if( ra[ i ] != AST__BAD && dec[ i ] != AST__BAD ) {
point2[ 0 ] = ra[ i ];
point2[ 1 ] = dec[ i ];
dist = astDistance( fs, point1, point2 );
if( dist > maxdist ) maxdist = dist;
}
}
/* Convert from radius to diameter. */
maxdist *= 2.0;
/* Format this size as a dec value (i.e. arc-distance) and display it. */
if( maxdist > 0.0 ) {
msgSetc( "SIZE", astFormat( fs, 2, maxdist ) );
msgOut( " ", " Size: ^SIZE", status );
} else {
maxdist = AST__BAD;
msgOut( " ", " Size: <unknown>", status );
}
/* If a discontinuity passes through the tile, the centre and size may be
unknown. */
} else {
ra0 = AST__BAD;
dec0 = AST__BAD;
maxdist = AST__BAD;
msgOut( " ", " Centre (ICRS): RA=<unknown> DEC=<unknown>", status );
msgOut( " ", " Size: <unknown>", status );
}
/* Write the tile centre ra and dec in radians to the output parameters. */
parPut0d( "RACEN", norm_radec[ 0 ], status );
parPut0d( "DECCEN", norm_radec[ 1 ], status );
/* Write the size to the output parameter as radians. */
parPut0d( "SIZE", maxdist, status );
/* Get the translation of the environment variable JSA_TILE_DIR. */
jcmt_tiles = getenv( "JSA_TILE_DIR" );
/* Initialise the path to the tile's NDF to hold the root directory.
Use the current working directory if JSA_TILE_DIR is undefined. */
if( jcmt_tiles ) {
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
} else {
nc = 512;
jcmt_tiles = astMalloc( nc );
while( !getcwd( jcmt_tiles, nc ) ) {
nc *= 2;
jcmt_tiles = astRealloc( jcmt_tiles, nc );
}
nc = 0;
tilendf = astAppendString( tilendf, &nc, jcmt_tiles );
jcmt_tiles = astFree( jcmt_tiles );
}
/* Complete the path to the tile's NDF. */
tilendf = astAppendString( tilendf, &nc, "/" );
tilendf = astAppendString( tilendf, &nc, skytiling.subdir );
dirlen = nc;
sprintf( text, "/tile_%d.sdf", itile );
tilendf = astAppendString( tilendf, &nc, text );
/* Write it to the output parameter. */
parPut0c( "TILENDF", tilendf, status );
/* See if the NDF exists, and store the flag in the output parameter. */
exists = access( tilendf, F_OK ) ? 0 : 1;
parPut0l( "EXISTS", exists, status );
/* If the NDF does not exist, create it if required. */
parGet0l( "CREATE", &create, status );
if( !exists && create && *status == SAI__OK ) {
/* Write the NDF info to the screen. */
msgSetc( "NDF", tilendf );
msgOutif( MSG__NORM, " ", " NDF: ^NDF (created)", status );
/* Temporarily terminate the NDF path at the end of the subdirectory. */
tilendf[ dirlen ] = 0;
/* Create the required directory (does nothing if the directory
already exists). It is given read/write/search permissions for owner
and group, and read/search permissions for others. */
(void) mkdir( tilendf, S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH );
/* Replace the character temporarily overwritten above. */
tilendf[ dirlen ] = '/';
/* Now create the tile's NDF. */
ndfPlace( NULL, tilendf, &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf1, status );
/* Fill its data array with zeros. */
ndfMap( indf1, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
/* Store the WCS FrameSet. */
ndfPtwcs( fs, indf1, status );
/* If the instrument jsatiles.have variance, fill the variance array with zeros. */
if( skytiling.var ) {
ndfMap( indf1, "Variance", skytiling.type, "WRITE/ZERO", &pntr,
&el, status );
}
/* Create a SMURF extension. */
ndfXnew( indf1, SMURF__EXTNAME, SMURF__EXTTYPE, 0, NULL, &xloc, status );
/* Store the tile number and instrument name in the extension. */
datNew0I( xloc, "TILE", status );
datFind( xloc, "TILE", &cloc, status );
datPut0I( cloc, itile, status );
datAnnul( &cloc, status );
datNew0C( xloc, "INSTRUMENT", strlen( skytiling.name ), status );
datFind( xloc, "INSTRUMENT", &cloc, status );
datPut0C( cloc, skytiling.name, status );
datAnnul( &cloc, status );
/* Create a weights NDF within the SMURF extension, and fill its data
array with zeros. */
ndfPlace( xloc, "WEIGHTS", &place, status );
ndfNew( skytiling.type, 2, lbnd, ubnd, &place, &indf2, status );
ndfMap( indf2, "Data", skytiling.type, "WRITE/ZERO", &pntr, &el,
status );
ndfPtwcs( fs, indf2, status );
ndfAnnul( &indf2, status );
/* Annul the extension locator and the main NDF identifier. */
datAnnul( &xloc, status );
ndfAnnul( &indf1, status );
/* Write the NDF info to the screen. */
} else {
msgSetc( "NDF", tilendf );
msgSetc( "E", exists ? "exists" : "does not exist" );
msgOut( " ", " NDF: ^NDF (^E)", status );
}
/* Initialise TBND and TLBND to indicate no overlap. */
tlbnd[ 0 ] = 1;
tlbnd[ 1 ] = 1;
tubnd[ 0 ] = 0;
tubnd[ 1 ] = 0;
/* Attempt to to get an AST Region (assumed to be in some 2D sky coordinate
system) using parameter "TARGET". */
if( *status == SAI__OK ) {
kpg1Gtobj( "TARGET", "Region",
(void (*)( void )) F77_EXTERNAL_NAME(ast_isaregion),
&obj, status );
/* Annul the error if none was obtained. */
if( *status == PAR__NULL ) {
errAnnul( status );
/* Otherwise, use the supplied object. */
} else {
target = (AstRegion *) obj;
/* If the target Region is 3-dimensional, remove the third axis, which
is assumed to be a spectral axis. */
if( astGetI( target, "Naxes" ) == 3 ) {
axes[ 0 ] = 1;
axes[ 1 ] = 2;
target = astPickAxes( target, 2, axes, NULL );
}
/* See if there is any overlap between the target and the tile. */
overlap = NULL;
flag = astOverlap( region, target );
if( flag == 0 ) {
msgOut( "", " Cannot convert between the coordinate system of the "
"supplied target and the tile.", status );
} else if( flag == 1 || flag == 6 ) {
msgOut( "", " There is no overlap between the target and the tile.",
status );
} else if( flag == 2 ) {
msgOut( "", " The tile is contained within the target.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( flag == 3 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 4 ) {
overlap = astCmpRegion( region, target, AST__AND, " " );
} else if( flag == 5 ) {
msgOut( "", " The target and tile are identical.",
status );
tlbnd[ 0 ] = lbnd[ 0 ];
tlbnd[ 1 ] = lbnd[ 1 ];
tubnd[ 0 ] = ubnd[ 0 ];
tubnd[ 1 ] = ubnd[ 1 ];
} else if( *status == SAI__OK ) {
*status = SAI__OK;
errRepf( "", "Unexpected value %d returned by astOverlap "
"(programming error).", status, flag );
}
/* If a region containing the intersection of the tile and target was
created above, map it into the grid coordinate system of the tile. */
if( overlap ) {
overlap = astMapRegion( overlap, astGetMapping( fs, AST__CURRENT,
AST__BASE ),
astGetFrame( fs, AST__BASE ) );
/* Get its GRID bounds. */
astGetRegionBounds( overlap, dlbnd, dubnd );
/* Convert to integer. */
tlbnd[ 0 ] = ceil( dlbnd[ 0 ] - 0.5 );
tlbnd[ 1 ] = ceil( dlbnd[ 1 ] - 0.5 );
tubnd[ 0 ] = ceil( dubnd[ 0 ] - 0.5 );
tubnd[ 1 ] = ceil( dubnd[ 1 ] - 0.5 );
/* Convert to PIXEL indices within the tile. */
tlbnd[ 0 ] += lbnd[ 0 ] - 1;
tlbnd[ 1 ] += lbnd[ 1 ] - 1;
tubnd[ 0 ] += lbnd[ 0 ] - 1;
tubnd[ 1 ] += lbnd[ 1 ] - 1;
msgOutf( "", " The target overlaps section (%d:%d,%d:%d).",
status, tlbnd[ 0 ], tubnd[ 0 ], tlbnd[ 1 ], tubnd[ 1 ] );
}
}
}
/* Store the pixel index bounds of the tiles overlap with the target. */
parPut1i( "TLBND", 2, tlbnd, status );
parPut1i( "TUBND", 2, tubnd, status );
/* Arrive here if an error occurs. */
L999:;
/* Free resources. */
tilendf = astFree( tilendf );
/* End the AST context. */
astEnd;
/* Issue a status indication.*/
msgBlank( status );
if( *status == SAI__OK ) {
msgOutif( MSG__VERB, "", "JSATILEINFO succeeded.", status);
} else {
msgOutif( MSG__VERB, "", "JSATILEINFO failed.", status);
}
}
void smurf_unmakemap( int *status ) {
/* Local Variables */
AstFrameSet *wcsin = NULL; /* WCS Frameset for input cube */
AstMapping *skymap; /* GRID->SkyFrame Mapping from input WCS */
AstSkyFrame *abskyfrm; /* Input SkyFrame (always absolute) */
AstSkyFrame *skyfrm = NULL;/* SkyFrame from the input WCS Frameset */
Grp *igrp1 = NULL; /* Group of input sky files */
Grp *igrp2 = NULL; /* Group of input template files */
Grp *igrpc = NULL; /* Group of input COM files */
Grp *igrpg = NULL; /* Group of input GAI files */
Grp *igrpq = NULL; /* Group of input Q sky files */
Grp *igrpu = NULL; /* Group of input U sky files */
Grp *ogrp = NULL; /* Group containing output file */
HDSLoc *cloc = NULL; /* HDS locator for component ipdata structure */
HDSLoc *iploc = NULL; /* HDS locator for top level ipdata structure */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
char ipdata[ 200 ]; /* Text buffer for IPDATA value */
char pabuf[ 10 ]; /* Text buffer for parameter value */
char subarray[ 5 ]; /* Name of SCUBA-2 subarray (s8a,s8b,etc) */
dim_t iel; /* Index of next element */
dim_t ndata; /* Number of elements in array */
dim_t ntslice; /* Number of time slices in array */
double *ang_data = NULL; /* Pointer to the FP orientation angles */
double *angc_data = NULL; /* Pointer to the instrumental ANGC data */
double *c0_data = NULL; /* Pointer to the instrumental C0 data */
double *gai_data = NULL; /* Pointer to the input GAI map */
double *in_data = NULL; /* Pointer to the input I sky map */
double *inc_data = NULL; /* Pointer to the input COM data */
double *inq_data = NULL; /* Pointer to the input Q sky map */
double *inu_data = NULL; /* Pointer to the input U sky map */
double *outq_data = NULL; /* Pointer to the Q time series data */
double *outu_data = NULL; /* Pointer to the U time series data */
double *p0_data = NULL; /* Pointer to the instrumental P0 data */
double *p1_data = NULL; /* Pointer to the instrumental P1 data */
double *pd; /* Pointer to next element */
double *pq = NULL; /* Pointer to next Q time series value */
double *pu = NULL; /* Pointer to next U time series value */
double *qinst_data = NULL; /* Pointer to the instrumental Q data */
double *uinst_data = NULL; /* Pointer to the instrumental U data */
double amp16; /* Amplitude of 16 Hz signal */
double amp2; /* Amplitude of 2 Hz signal */
double amp4; /* Amplitude of 4 Hz signal */
double angrot; /* Angle from focal plane X axis to fixed analyser */
double paoff; /* WPLATE value corresponding to POL_ANG=0.0 */
double params[ 4 ]; /* astResample parameters */
double phase16; /* Phase of 16 Hz signal */
double phase2; /* Phase of 2 Hz signal */
double phase4; /* Phase of 4 Hz signal */
double sigma; /* Standard deviation of noise to add to output */
int alignsys; /* Align data in the map's system? */
int cdims[ 3 ]; /* Common-mode NDF dimensions */
int dims[ NDF__MXDIM ]; /* NDF dimensions */
int flag; /* Was the group expression flagged? */
int gdims[ 3 ]; /* GAI model NDF dimensions */
int harmonic; /* The requested harmonic */
int ifile; /* Input file index */
int indf; /* Input sky map NDF identifier */
int indfangc; /* IP ANGC values NDF identifier */
int indfc0; /* IP C0 values NDF identifier */
int indfc; /* Input COM NDF identifier */
int indfcs; /* NDF identifier for matching section of COM */
int indfg; /* Input GAI NDF identifier */
int indfin; /* Input template cube NDF identifier */
int indfiq; /* Input instrumental Q NDF */
int indfiu; /* Input instrumental U NDF */
int indfout; /* Output cube NDF identifier */
int indfp0; /* IP P0 values NDF identifier */
int indfp1; /* IP P1 values NDF identifier */
int indfq; /* Input Q map NDF identifier */
int indfu; /* Input U map NDF identifier */
int interp = 0; /* Pixel interpolation method */
int lbndc[ 3 ]; /* Array of lower bounds of COM NDF */
int moving; /* Is the telescope base position changing? */
int ndim; /* Number of pixel axes in NDF */
int ndimc; /* Number of pixel axes in common-mode NDF */
int ndimg; /* Number of pixel axes in GAI NDF */
int nel; /* Number of elements in array */
int nelc; /* Number of elements in COM array */
int nelg; /* Number of elements in GAI array */
int nelqu; /* Number of elements in Q or U array */
int ngood; /* No. of good values in putput cube */
int nparam = 0; /* No. of parameters required for interpolation scheme */
int pasign; /* Indicates sense of POL_ANG value */
int sdim[ 2 ]; /* Array of significant pixel axes */
int slbnd[ 2 ]; /* Array of lower bounds of input map */
int subnd[ 2 ]; /* Array of upper bounds of input map */
int ubndc[ 3 ]; /* Array of upper bounds of COM NDF */
size_t ncom; /* Number of com files */
size_t ngai; /* Number of gai files */
size_t nskymap; /* Number of supplied sky cubes */
size_t outsize; /* Number of files in output group */
size_t size; /* Number of files in input group */
smfData *odata = NULL; /* Pointer to output data struct */
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Get an identifier for the input NDF. We use NDG (via kpg1Rgndf)
instead of calling ndfAssoc directly since NDF/HDS has problems with
file names containing spaces, which NDG does not have. */
kpg1Rgndf( "IN", 1, 1, "", &igrp1, &nskymap, status );
ndgNdfas( igrp1, 1, "READ", &indf, status );
/* Map the data array in the input sky map. */
ndfMap( indf, "DATA", "_DOUBLE", "READ", (void **) &in_data, &nel,
status );
/* Get the WCS FrameSet from the sky map, together with its pixel index
bounds. */
kpg1Asget( indf, 2, 0, 1, 1, sdim, slbnd, subnd, &wcsin, status );
/* Check the current Frame is a SKY frame. */
skyfrm = astGetFrame( wcsin, AST__CURRENT );
if( !astIsASkyFrame( skyfrm ) && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( " ", " Current Frame in ^N is not a SKY Frame.", status );
}
/* Get a copy of the current frame that represents absolute coords rather
than offsets. We assume the target is moving if the map represents
offsets. */
moving = ( *status == SAI__OK &&
!strcmp( astGetC( skyfrm, "SkyRefIs" ), "Origin" ) ) ? 1 : 0;
abskyfrm = astCopy( skyfrm );
astClear( abskyfrm, "SkyRefIs" );
/* If the ALIGNSYS parameter is TRUE then we align the raw data with the
map in the current system of the map, rather than the default ICRS. */
parGet0l( "ALIGNSYS", &alignsys, status );
if( alignsys ) astSetC( abskyfrm, "AlignSystem", astGetC( abskyfrm,
"System" ) );
/* Get the Mapping from the Sky Frame to grid axis in the iput map. */
skymap = astGetMapping( wcsin, AST__CURRENT, AST__BASE );
/* Get the pixel interpolation scheme to use. */
parChoic( "INTERP", "NEAREST", "NEAREST,LINEAR,SINC,"
"SINCSINC,SINCCOS,SINCGAUSS,SOMB,SOMBCOS",
1, pabuf, 10, status );
if( !strcmp( pabuf, "NEAREST" ) ) {
interp = AST__NEAREST;
nparam = 0;
} else if( !strcmp( pabuf, "LINEAR" ) ) {
interp = AST__LINEAR;
nparam = 0;
} else if( !strcmp( pabuf, "SINC" ) ) {
interp = AST__SINC;
nparam = 1;
} else if( !strcmp( pabuf, "SINCSINC" ) ) {
interp = AST__SINCSINC;
nparam = 2;
} else if( !strcmp( pabuf, "SINCCOS" ) ) {
interp = AST__SINCCOS;
nparam = 2;
} else if( !strcmp( pabuf, "SINCGAUSS" ) ) {
interp = AST__SINCGAUSS;
nparam = 2;
} else if( !strcmp( pabuf, "SOMB" ) ) {
interp = AST__SOMB;
nparam = 1;
} else if( !strcmp( pabuf, "SOMBCOS" ) ) {
interp = AST__SOMBCOS;
nparam = 2;
} else if( *status == SAI__OK ) {
nparam = 0;
*status = SAI__ERROR;
msgSetc( "V", pabuf );
errRep( "", "Support not available for INTERP = ^V (programming "
"error)", status );
}
/* Get an additional parameter vector if required. */
if( nparam > 0 ) parExacd( "PARAMS", nparam, params, status );
/* Get a group of reference time series files to use as templates for
the output time series files.*/
ndgAssoc( "REF", 1, &igrp2, &size, &flag, status );
/* Get output file(s) */
kpg1Wgndf( "OUT", igrp2, size, size, "More output files required...",
&ogrp, &outsize, status );
/* Get he noise level to add to the output data. */
parGet0d( "SIGMA", &sigma, status );
/* Get any Q and U input maps. */
if( *status == SAI__OK ) {
kpg1Rgndf( "QIN", 1, 1, "", &igrpq, &nskymap, status );
ndgNdfas( igrpq, 1, "READ", &indfq, status );
ndfMap( indfq, "DATA", "_DOUBLE", "READ", (void **) &inq_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "Q", indfq );
*status = SAI__ERROR;
errRep( "", "Q image '^Q' is not the same size as the I image.",
status );
}
kpg1Rgndf( "UIN", 1, 1, "", &igrpu, &nskymap, status );
ndgNdfas( igrpu, 1, "READ", &indfu, status );
ndfMap( indfu, "DATA", "_DOUBLE", "READ", (void **) &inu_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "U", indfu );
*status = SAI__ERROR;
errRep( "", "U image '^U' is not the same size as the I image.",
status );
}
if( *status == PAR__NULL ) {
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
inq_data = NULL;
inu_data = NULL;
errAnnul( status );
} else {
parGet0d( "ANGROT", &angrot, status );
parGet0d( "PAOFF", &paoff, status );
parGet0l( "PASIGN", &pasign, status );
}
}
/* Get any common-mode files. */
if( *status == SAI__OK ) {
kpg1Rgndf( "COM", size, size, "", &igrpc, &ncom, status );
if( *status == PAR__NULL ) {
errAnnul( status );
ncom = 0;
}
}
/* Get any GAI files. */
if( *status == SAI__OK ) {
kpg1Rgndf( "GAI", size, size, "", &igrpg, &ngai, status );
if( *status == PAR__NULL ) {
errAnnul( status );
ngai = 0;
}
}
/* Get any instrumental polarisation files. */
if( *status == SAI__OK ) {
/* First see if the user wants to use the "INSTQ/INSTU" scheme for
specifying instrumental polarisation. */
ndfAssoc( "INSTQ", "Read", &indfiq, status );
ndfAssoc( "INSTU", "Read", &indfiu, status );
if( *status == PAR__NULL ) {
ndfAnnul( &indfiq, status );
ndfAnnul( &indfiu, status );
errAnnul( status );
} else {
msgOut( " ", "Using user-defined IP model", status );
ndfDim( indfiq, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfiq );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfiq, "DATA", "_DOUBLE", "READ", (void **) &qinst_data,
&nel, status );
}
ndfDim( indfiu, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfiu );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfiu, "DATA", "_DOUBLE", "READ", (void **) &uinst_data,
&nel, status );
}
}
/* If not, see if the user wants to use the Johnstone/Kennedy instrumental
polarisation model. The IPDATA parameter gives the path to an HDS
container file contining NDFs holding the required IP data for all
subarrays. */
if( !qinst_data ) {
parGet0c( "IPDATA", ipdata, sizeof(ipdata), status );
if( *status == PAR__NULL ) {
errAnnul( status );
} else {
msgOutf( " ", "Using Johnstone/Kennedy IP model in %s",
status, ipdata );
hdsOpen( ipdata, "READ", &iploc, status );
}
}
}
/* Loop round all the template time series files. */
for( ifile = 1; ifile <= (int) size && *status == SAI__OK; ifile++ ) {
/* Start a new NDF context. */
ndfBegin();
/* Create the output NDF by propagating everything from the input, except
for quality and variance. */
ndgNdfas( igrp2, ifile, "READ", &indfin, status );
ndfMsg( "FILE", indfin );
msgSeti( "THISFILE", ifile );
msgSeti( "NUMFILES", size );
msgOutif( MSG__NORM, " ", "Simulating ^THISFILE/^NUMFILES ^FILE",
status );
ndgNdfpr( indfin, "DATA,HISTORY,LABEL,TITLE,WCS,UNITS,EXTENSION(*)",
ogrp, ifile, &indfout, status );
ndfAnnul( &indfin, status );
ndfAnnul( &indfout, status );
/* We now re-open the output NDF and then modify its data values. */
smf_open_file( wf, ogrp, ifile, "UPDATE", 0, &odata, status );
/* Issue a suitable message and abort if anything went wrong. */
if( *status != SAI__OK ) {
errRep( FUNC_NAME, "Could not open input template file.", status );
break;
} else {
if( odata->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( odata->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
}
}
/* Check the reference time series contains double precision values. */
smf_dtype_check_fatal( odata, NULL, SMF__DOUBLE, status );
/* Get the total number of data elements, and the number of time slices. */
smf_get_dims( odata, NULL, NULL, NULL, &ntslice, &ndata, NULL,
NULL, status );
/* Get the subarray name */
smf_fits_getS( odata->hdr, "SUBARRAY", subarray, sizeof(subarray),
status );
/* If we are using the Johnstone/Kennedy IP model, open and map the
relevant parameter NDFs within the IPDATA container file. */
if( iploc ) {
datFind( iploc, subarray, &cloc, status );
ndfFind( cloc, "C0", &indfc0, status );
ndfDim( indfc0, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfc0 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfc0, "DATA", "_DOUBLE", "READ", (void **) &c0_data,
&nel, status );
}
ndfFind( cloc, "P0", &indfp0, status );
ndfDim( indfp0, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfp0 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfp0, "DATA", "_DOUBLE", "READ", (void **) &p0_data,
&nel, status );
}
ndfFind( cloc, "P1", &indfp1, status );
ndfDim( indfp1, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfp1 );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfp1, "DATA", "_DOUBLE", "READ", (void **) &p1_data,
&nel, status );
}
ndfFind( cloc, "ANGC", &indfangc, status );
ndfDim( indfangc, 2, dims, &ndim, status );
if( dims[ 0 ] != 32 || dims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "N", indfangc );
errRep( " ", "Instrumental polarisation file ^N has bad "
"dimensions - should be 32x40.", status );
} else {
ndfMap( indfangc, "DATA", "_DOUBLE", "READ", (void **) &angc_data,
&nel, status );
}
}
/* Open any COM file. */
if( ncom ) {
ndgNdfas( igrpc, ifile, "READ", &indfc, status );
ndfDim( indfc, 3, cdims, &ndimc, status );
/* Check its dimensions. */
if( *status == SAI__OK ) {
if( ndimc == 1 ) {
if( cdims[ 0 ] < (int) ntslice ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
ndfMsg( "R", indfin );
msgSeti( "N", cdims[ 0 ] );
msgSeti( "M", ntslice );
errRep( " ", "Supplied COM file (^C) has ^N time-slices, but "
"the reference NDF (^R) has ^M time-slices.", status );
} else {
ndfBound( indfc, 3, lbndc, ubndc, &ndimc, status );
ubndc[ 0 ] = lbndc[ 0 ] + ntslice - 1;
ndfSect( indfc, 1, lbndc, ubndc, &indfcs, status );
}
} else if( ndimc == 3 ) {
if( cdims[ 0 ] != 1 || cdims[ 1 ] != 1 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
errRep( " ", "Supplied 3D COM file (^C) has bad "
"dimensions for axis 1 and/or 2 (should "
"both be 1 pixel long).", status );
} else if( cdims[ 2 ] < (int) ntslice ) {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
ndfMsg( "R", indfin );
msgSeti( "N", cdims[ 2 ] );
msgSeti( "M", ntslice );
errRep( " ", "Supplied COM file (^C) has ^N time-slices, but "
"the reference NDF (^R) has ^M time-slices.", status );
} else {
ndfBound( indfc, 3, lbndc, ubndc, &ndimc, status );
ubndc[ 2 ] = lbndc[ 2 ] + ntslice - 1;
ndfSect( indfc, 3, lbndc, ubndc, &indfcs, status );
}
} else {
*status = SAI__ERROR;
ndfMsg( "C", indfc );
msgSeti( "N", ndimc );
errRep( " ", "Supplied COM file (^C) has ^N dimensions - "
"must be 3.", status );
}
}
ndfMap( indfcs, "DATA", "_DOUBLE", "READ", (void **) &inc_data,
&nelc, status );
} else {
indfcs = NDF__NOID;
inc_data = NULL;
}
/* Open any GAI files. */
if( ngai ) {
ndgNdfas( igrpg, ifile, "READ", &indfg, status );
ndfDim( indfg, 3, gdims, &ndimg, status );
/* Check its dimensions, and map it if OK. */
if( *status == SAI__OK ) {
if( ndimg != 2 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfg );
msgSeti( "N", ndimg );
errRep( " ", "Supplied GAI file (^C) has ^N dimensions - "
"must be 2.", status );
} else if( gdims[ 0 ] != 32 || gdims[ 1 ] != 40 ) {
*status = SAI__ERROR;
ndfMsg( "C", indfg );
errRep( " ", "Supplied GAI file (^C) has has bad "
"dimensions - should be 32x40.", status );
}
}
ndfMap( indfg, "DATA", "_DOUBLE", "READ", (void **) &gai_data,
&nelg, status );
} else {
indfg = NDF__NOID;
gai_data = NULL;
}
/* Fill the output with bad values. */
if( *status == SAI__OK ) {
pd = odata->pntr[ 0 ];
for( iel = 0; iel < ndata; iel++ ) *(pd++) = VAL__BADD;
}
/* Resample the sky map data into the output time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, in_data, odata->pntr[ 0 ],
NULL, &ngood, status );
/* Add on any COM data. */
smf_addcom( wf, odata, inc_data, status );
/* Issue a wrning if there is no good data in the output cube. */
if( ngood == 0 ) msgOutif( MSG__NORM, " ", " Output contains no "
"good data values.", status );
/* If Q and U maps have been given, allocate room to hold resampled Q and
U values, and fill them with bad values. */
if( inq_data && inu_data ) {
pq = outq_data = astMalloc( ndata*sizeof( *outq_data ) );
pu = outu_data = astMalloc( ndata*sizeof( *outu_data ) );
if( *status == SAI__OK ) {
for( iel = 0; iel < ndata; iel++ ) {
*(pu++) = VAL__BADD;
*(pq++) = VAL__BADD;
}
}
/* Determine the harmonic to use. */
parGet0i( "HARMONIC", &harmonic, status );
/* If producing the normal 8 Hz harmonic, get the amplitude and phase of a
other signals to add onto the 8 Hz signal. */
if( harmonic == 4 ) {
parGet0d( "AMP2", &2, status );
parGet0d( "PHASE2", &phase2, status );
parGet0d( "AMP4", &4, status );
parGet0d( "PHASE4", &phase4, status );
parGet0d( "AMP16", &16, status );
parGet0d( "PHASE16", &phase16, status );
} else {
amp2 = 0.0;
phase2 = 0.0;
amp4 = 0.0;
phase4 = 0.0;
amp16 = 0.0;
phase16 = 0.0;
}
/* Allocate room for an array to hold the angle from the Y pixel axis
in the sky map to the focal plane Y axis, in radians, at each time
slice. Positive rotation is in the same sense as rotation from
focal plane X to focal plane Y. */
ang_data = astMalloc( ntslice*sizeof( *ang_data ) );
/* Resample them both into 3D time series. These Q/U values arw with
respect to the sky image Y axis. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inq_data, outq_data,
ang_data, &ngood, status );
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inu_data, outu_data,
NULL, &ngood, status );
/* Combine these time series with the main output time series so that the
main output is analysed intensity. */
smf_uncalc_iqu( wf, odata, odata->pntr[ 0 ], outq_data, outu_data,
ang_data, pasign, AST__DD2R*paoff, AST__DD2R*angrot,
amp2, AST__DD2R*phase2, amp4, AST__DD2R*phase4,
amp16, AST__DD2R*phase16, qinst_data, uinst_data,
c0_data, p0_data, p1_data, angc_data, harmonic,
status );
/* Release work space. */
outq_data = astFree( outq_data );
outu_data = astFree( outu_data );
ang_data = astFree( ang_data );
}
/* Factor in any GAI data. */
smf_addgai( wf, odata, gai_data, status );
/* Close the output time series file. */
smf_close_file( wf, &odata, status );
/* Close the IP data container for the current subarray, if it is open. */
if( cloc ) datAnnul( &cloc, status );
/* End the NDF context. */
ndfEnd( status );
}
/* Close any input data file that is still open due to an early exit from
the above loop. */
if( odata != NULL ) {
smf_close_file( wf, &odata, status );
odata = NULL;
}
/* Free remaining resources. */
if( igrp1 != NULL) grpDelet( &igrp1, status);
if( igrp2 != NULL) grpDelet( &igrp2, status);
if( igrpq != NULL) grpDelet( &igrpq, status);
if( igrpu != NULL) grpDelet( &igrpu, status);
if( igrpc != NULL) grpDelet( &igrpc, status);
if( igrpg != NULL) grpDelet( &igrpg, status);
if( ogrp != NULL) grpDelet( &ogrp, status);
if( iploc ) datAnnul( &iploc, status );
/* End the NDF context. */
ndfEnd( status );
/* End the tile's AST context. */
astEnd;
/* Issue a status indication.*/
if( *status == SAI__OK ) {
msgOutif(MSG__VERB," ",TASK_NAME " succeeded, time series written.", status);
} else {
msgOutif(MSG__VERB," ",TASK_NAME " failed.", status);
}
}
void smurf_unmakemap( int *status ) {
/* Local Variables */
AstFrameSet *wcsin = NULL; /* WCS Frameset for input cube */
AstMapping *skymap; /* GRID->SkyFrame Mapping from input WCS */
AstSkyFrame *abskyfrm; /* Input SkyFrame (always absolute) */
AstSkyFrame *skyfrm = NULL;/* SkyFrame from the input WCS Frameset */
Grp *igrp1 = NULL; /* Group of input sky files */
Grp *igrp2 = NULL; /* Group of input template files */
Grp *igrpq = NULL; /* Group of input Q sky files */
Grp *igrpu = NULL; /* Group of input U sky files */
Grp *ogrp = NULL; /* Group containing output file */
ThrWorkForce *wf = NULL; /* Pointer to a pool of worker threads */
char pabuf[ 10 ]; /* Text buffer for parameter value */
dim_t iel; /* Index of next element */
dim_t ndata; /* Number of elements in array */
dim_t ntslice; /* Number of time slices in array */
double *ang_data = NULL; /* Pointer to the FP orientation angles */
double *in_data = NULL; /* Pointer to the input I sky map */
double *inq_data = NULL; /* Pointer to the input Q sky map */
double *inu_data = NULL; /* Pointer to the input U sky map */
double *outq_data = NULL; /* Pointer to the Q time series data */
double *outu_data = NULL; /* Pointer to the U time series data */
double *pd; /* Pointer to next element */
double *pq = NULL; /* Pointer to next Q time series value */
double *pu = NULL; /* Pointer to next U time series value */
double angrot; /* Angle from focal plane X axis to fixed analyser */
double paoff; /* WPLATE value corresponding to POL_ANG=0.0 */
double params[ 4 ]; /* astResample parameters */
double sigma; /* Standard deviation of noise to add to output */
int alignsys; /* Align data in the map's system? */
int flag; /* Was the group expression flagged? */
int harmonic; /* The requested harmonic */
int ifile; /* Input file index */
int indf; /* Input sky map NDF identifier */
int indfin; /* Input template cube NDF identifier */
int indfout; /* Output cube NDF identifier */
int indfq; /* Input Q map NDF identifier */
int indfu; /* Input U map NDF identifier */
int interp = 0; /* Pixel interpolation method */
int moving; /* Is the telescope base position changing? */
int nel; /* Number of elements in array */
int nelqu; /* Number of elements in Q or U array */
int ngood; /* No. of good values in putput cube */
int nparam = 0; /* No. of parameters required for interpolation scheme */
int pasign; /* Indicates sense of POL_ANG value */
int sdim[ 2 ]; /* Array of significant pixel axes */
int slbnd[ 2 ]; /* Array of lower bounds of input map */
int subnd[ 2 ]; /* Array of upper bounds of input map */
size_t nskymap; /* Number of supplied sky cubes */
size_t outsize; /* Number of files in output group */
size_t size; /* Number of files in input group */
smfData *odata = NULL; /* Pointer to output data struct */
/* Check inherited status */
if( *status != SAI__OK ) return;
/* Begin an AST context */
astBegin;
/* Begin an NDF context. */
ndfBegin();
/* Find the number of cores/processors available and create a pool of
threads of the same size. */
wf = thrGetWorkforce( thrGetNThread( SMF__THREADS, status ), status );
/* Get an identifier for the input NDF. We use NDG (via kpg1Rgndf)
instead of calling ndfAssoc directly since NDF/HDS has problems with
file names containing spaces, which NDG does not have. */
kpg1Rgndf( "IN", 1, 1, "", &igrp1, &nskymap, status );
ndgNdfas( igrp1, 1, "READ", &indf, status );
/* Map the data array in the input sky map. */
ndfMap( indf, "DATA", "_DOUBLE", "READ", (void **) &in_data, &nel,
status );
/* Get the WCS FrameSet from the sky map, together with its pixel index
bounds. */
kpg1Asget( indf, 2, 0, 1, 1, sdim, slbnd, subnd, &wcsin, status );
/* Check the current Frame is a SKY frame. */
skyfrm = astGetFrame( wcsin, AST__CURRENT );
if( !astIsASkyFrame( skyfrm ) && *status == SAI__OK ) {
ndfMsg( "N", indf );
*status = SAI__ERROR;
errRep( " ", " Current Frame in ^N is not a SKY Frame.", status );
}
/* Get a copy of the current frame that represents absolute coords rather
than offsets. We assume the target is moving if the map represents
offsets. */
moving = ( *status == SAI__OK &&
!strcmp( astGetC( skyfrm, "SkyRefIs" ), "Origin" ) ) ? 1 : 0;
abskyfrm = astCopy( skyfrm );
astClear( abskyfrm, "SkyRefIs" );
/* If the ALIGNSYS parameter is TRUE then we align the raw data with the
map in the current system of the map, rather than the default ICRS. */
parGet0l( "ALIGNSYS", &alignsys, status );
if( alignsys ) astSetC( abskyfrm, "AlignSystem", astGetC( abskyfrm,
"System" ) );
/* Get the Mapping from the Sky Frame to grid axis in the iput map. */
skymap = astGetMapping( wcsin, AST__CURRENT, AST__BASE );
/* Get the pixel interpolation scheme to use. */
parChoic( "INTERP", "NEAREST", "NEAREST,LINEAR,SINC,"
"SINCSINC,SINCCOS,SINCGAUSS,SOMB,SOMBCOS",
1, pabuf, 10, status );
if( !strcmp( pabuf, "NEAREST" ) ) {
interp = AST__NEAREST;
nparam = 0;
} else if( !strcmp( pabuf, "LINEAR" ) ) {
interp = AST__LINEAR;
nparam = 0;
} else if( !strcmp( pabuf, "SINC" ) ) {
interp = AST__SINC;
nparam = 1;
} else if( !strcmp( pabuf, "SINCSINC" ) ) {
interp = AST__SINCSINC;
nparam = 2;
} else if( !strcmp( pabuf, "SINCCOS" ) ) {
interp = AST__SINCCOS;
nparam = 2;
} else if( !strcmp( pabuf, "SINCGAUSS" ) ) {
interp = AST__SINCGAUSS;
nparam = 2;
} else if( !strcmp( pabuf, "SOMB" ) ) {
interp = AST__SOMB;
nparam = 1;
} else if( !strcmp( pabuf, "SOMBCOS" ) ) {
interp = AST__SOMBCOS;
nparam = 2;
} else if( *status == SAI__OK ) {
nparam = 0;
*status = SAI__ERROR;
msgSetc( "V", pabuf );
errRep( "", "Support not available for INTERP = ^V (programming "
"error)", status );
}
/* Get an additional parameter vector if required. */
if( nparam > 0 ) parExacd( "PARAMS", nparam, params, status );
/* Get a group of reference time series files to use as templates for
the output time series files.*/
ndgAssoc( "REF", 1, &igrp2, &size, &flag, status );
/* Get output file(s) */
kpg1Wgndf( "OUT", igrp2, size, size, "More output files required...",
&ogrp, &outsize, status );
/* Get he noise level to add to the output data. */
parGet0d( "SIGMA", &sigma, status );
/* Get any Q and U input maps. */
if( *status == SAI__OK ) {
kpg1Rgndf( "QIN", 1, 1, "", &igrpq, &nskymap, status );
ndgNdfas( igrpq, 1, "READ", &indfq, status );
ndfMap( indfq, "DATA", "_DOUBLE", "READ", (void **) &inq_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "Q", indfq );
*status = SAI__ERROR;
errRep( "", "Q image '^Q' is not the same size as the I image.",
status );
}
kpg1Rgndf( "UIN", 1, 1, "", &igrpu, &nskymap, status );
ndgNdfas( igrpu, 1, "READ", &indfu, status );
ndfMap( indfu, "DATA", "_DOUBLE", "READ", (void **) &inu_data, &nelqu,
status );
if( nelqu != nel && *status == SAI__OK ) {
ndfMsg( "U", indfu );
*status = SAI__ERROR;
errRep( "", "U image '^U' is not the same size as the I image.",
status );
}
if( *status == PAR__NULL ) {
ndfAnnul( &indfq, status );
ndfAnnul( &indfu, status );
inq_data = NULL;
inu_data = NULL;
errAnnul( status );
} else {
parGet0d( "ANGROT", &angrot, status );
parGet0d( "PAOFF", &paoff, status );
parGet0l( "PASIGN", &pasign, status );
}
}
/* Loop round all the template time series files. */
for( ifile = 1; ifile <= (int) size && *status == SAI__OK; ifile++ ) {
/* Start a new NDF context. */
ndfBegin();
/* Create the output NDF by propagating everything from the input, except
for quality and variance. */
ndgNdfas( igrp2, ifile, "READ", &indfin, status );
ndfMsg( "FILE", indfin );
msgSeti( "THISFILE", ifile );
msgSeti( "NUMFILES", size );
msgOutif( MSG__NORM, " ", "Simulating ^THISFILE/^NUMFILES ^FILE",
status );
ndgNdfpr( indfin, "DATA,HISTORY,LABEL,TITLE,WCS,UNITS,EXTENSION(*)",
ogrp, ifile, &indfout, status );
ndfAnnul( &indfin, status );
ndfAnnul( &indfout, status );
/* We now re-open the output NDF and then modify its data values. */
smf_open_file( wf, ogrp, ifile, "UPDATE", 0, &odata, status );
/* Issue a suitable message and abort if anything went wrong. */
if( *status != SAI__OK ) {
errRep( FUNC_NAME, "Could not open input template file.", status );
break;
} else {
if( odata->file == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfFile associated with smfData.",
status );
break;
} else if( odata->hdr == NULL ) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "No smfHead associated with smfData.",
status );
break;
}
}
/* Check the reference time series contains double precision values. */
smf_dtype_check_fatal( odata, NULL, SMF__DOUBLE, status );
/* Get the total number of data elements, and the number of time slices. */
smf_get_dims( odata, NULL, NULL, NULL, &ntslice, &ndata, NULL,
NULL, status );
/* Fill the output with bad values. */
if( *status == SAI__OK ) {
pd = odata->pntr[ 0 ];
for( iel = 0; iel < ndata; iel++ ) *(pd++) = VAL__BADD;
}
/* Resample the sky map data into the output time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, in_data, odata->pntr[ 0 ],
NULL, &ngood, status );
/* Issue a wrning if there is no good data in the output cube. */
if( ngood == 0 ) msgOutif( MSG__NORM, " ", " Output contains no "
"good data values.", status );
/* If Q and U maps have been given, allocate room to hold resampled Q and
U values, and fill them with bad values. */
if( inq_data && inu_data ) {
pq = outq_data = astMalloc( ndata*sizeof( *outq_data ) );
pu = outu_data = astMalloc( ndata*sizeof( *outu_data ) );
if( *status == SAI__OK ) {
for( iel = 0; iel < ndata; iel++ ) {
*(pu++) = VAL__BADD;
*(pq++) = VAL__BADD;
}
}
/* Determine the harmonic to use. */
parGet0i( "HARMONIC", &harmonic, status );
/* Allocate room for an array to hold the anti-clockwise angle from the
focal plane Y axis to the Y pixel axis in the reference map, at each
time slice. */
ang_data = astMalloc( ntslice*sizeof( *ang_data ) );
/* Resample them both into 3D time series. */
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inq_data, outq_data,
ang_data, &ngood, status );
smf_resampmap( wf, odata, abskyfrm, skymap, moving, slbnd, subnd,
interp, params, sigma, inu_data, outu_data,
NULL, &ngood, status );
/* Combine these time series with the main output time series so that the
main output is analysed intensity. */
smf_uncalc_iqu( wf, odata, odata->pntr[ 0 ], outq_data, outu_data,
ang_data, pasign, AST__DD2R*paoff, AST__DD2R*angrot,
harmonic, status );
/* Release work space. */
outq_data = astFree( outq_data );
outu_data = astFree( outu_data );
ang_data = astFree( ang_data );
}
/* Close the output time series file. */
smf_close_file( wf, &odata, status );
/* End the NDF context. */
ndfEnd( status );
}
/* Close any input data file that is still open due to an early exit from
the above loop. */
if( odata != NULL ) {
smf_close_file( wf, &odata, status );
odata = NULL;
}
/* Free remaining resources. */
if( igrp1 != NULL) grpDelet( &igrp1, status);
if( igrp2 != NULL) grpDelet( &igrp2, status);
if( igrpq != NULL) grpDelet( &igrpq, status);
if( igrpu != NULL) grpDelet( &igrpu, status);
if( ogrp != NULL) grpDelet( &ogrp, status);
/* End the NDF context. */
ndfEnd( status );
/* End the tile's AST context. */
astEnd;
/* Issue a status indication.*/
if( *status == SAI__OK ) {
msgOutif(MSG__VERB," ",TASK_NAME " succeeded, time series written.", status);
} else {
msgOutif(MSG__VERB," ",TASK_NAME " failed.", status);
}
}
