void
list()
#endif
{
register ARCHD *arcn;
register int res;
ARCHD archd;
time_t now;
arcn = &archd;
/*
* figure out archive type; pass any format specific options to the
* archive option processing routine; call the format init routine. We
* also save current time for ls_list() so we do not make a system
* call for each file we need to print. If verbose (vflag) start up
* the name and group caches.
*/
if ((get_arc() < 0) || ((*frmt->options)() < 0) ||
((*frmt->st_rd)() < 0))
return;
if (vflag && ((uidtb_start() < 0) || (gidtb_start() < 0)))
return;
now = time((time_t *)NULL);
/*
* step through the archive until the format says it is done
*/
while (next_head(arcn) == 0) {
/*
* check for pattern, and user specified options match.
* When all patterns are matched we are done.
*/
if ((res = pat_match(arcn)) < 0)
break;
if ((res == 0) && (sel_chk(arcn) == 0)) {
/*
* pattern resulted in a selected file
*/
if (pat_sel(arcn) < 0)
break;
/*
* modify the name as requested by the user if name
* survives modification, do a listing of the file
*/
if ((res = mod_name(arcn)) < 0)
break;
if (res == 0)
ls_list(arcn, now);
}
/*
* skip to next archive format header using values calculated
* by the format header read routine
*/
if (rd_skip(arcn->skip + arcn->pad) == 1)
break;
}
/*
* all done, let format have a chance to cleanup, and make sure that
* the patterns supplied by the user were all matched
*/
(void)(*frmt->end_rd)();
(void)sigprocmask(SIG_BLOCK, &s_mask, (sigset_t *)NULL);
ar_close();
pat_chk();
}
void
extract()
#endif
{
register ARCHD *arcn;
register int res;
off_t cnt;
ARCHD archd;
struct stat sb;
int fd;
arcn = &archd;
/*
* figure out archive type; pass any format specific options to the
* archive option processing routine; call the format init routine;
* start up the directory modification time and access mode database
*/
if ((get_arc() < 0) || ((*frmt->options)() < 0) ||
((*frmt->st_rd)() < 0) || (dir_start() < 0))
return;
/*
* When we are doing interactive rename, we store the mapping of names
* so we can fix up hard links files later in the archive.
*/
if (iflag && (name_start() < 0))
return;
/*
* step through each entry on the archive until the format read routine
* says it is done
*/
while (next_head(arcn) == 0) {
/*
* check for pattern, and user specified options match. When
* all the patterns are matched we are done
*/
if ((res = pat_match(arcn)) < 0)
break;
if ((res > 0) || (sel_chk(arcn) != 0)) {
/*
* file is not selected. skip past any file data and
* padding and go back for the next archive member
*/
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
/*
* with -u or -D only extract when the archive member is newer
* than the file with the same name in the file system (nos
* test of being the same type is required).
* NOTE: this test is done BEFORE name modifications as
* specified by pax. this operation can be confusing to the
* user who might expect the test to be done on an existing
* file AFTER the name mod. In honesty the pax spec is probably
* flawed in this respect.
*/
if ((uflag || Dflag) && ((lstat(arcn->name, &sb) == 0))) {
if (uflag && Dflag) {
if ((arcn->sb.st_mtime <= sb.st_mtime) &&
(arcn->sb.st_ctime <= sb.st_ctime)) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (Dflag) {
if (arcn->sb.st_ctime <= sb.st_ctime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (arcn->sb.st_mtime <= sb.st_mtime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
}
/*
* this archive member is now been selected. modify the name.
*/
if ((pat_sel(arcn) < 0) || ((res = mod_name(arcn)) < 0))
break;
if (res > 0) {
/*
* a bad name mod, skip and purge name from link table
*/
purg_lnk(arcn);
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
/*
* Non standard -Y and -Z flag. When the exisiting file is
* same age or newer skip
*/
if ((Yflag || Zflag) && ((lstat(arcn->name, &sb) == 0))) {
if (Yflag && Zflag) {
if ((arcn->sb.st_mtime <= sb.st_mtime) &&
(arcn->sb.st_ctime <= sb.st_ctime)) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (Yflag) {
if (arcn->sb.st_ctime <= sb.st_ctime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (arcn->sb.st_mtime <= sb.st_mtime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
}
if (vflag) {
(void)fputs(arcn->name, stderr);
vfpart = 1;
}
/*
* all ok, extract this member based on type
*/
if ((arcn->type != PAX_REG) && (arcn->type != PAX_CTG)) {
/*
* process archive members that are not regular files.
* throw out padding and any data that might follow the
* header (as determined by the format).
*/
if ((arcn->type == PAX_HLK) || (arcn->type == PAX_HRG))
res = lnk_creat(arcn);
else
res = node_creat(arcn);
(void)rd_skip(arcn->skip + arcn->pad);
if (res < 0)
purg_lnk(arcn);
if (vflag && vfpart) {
(void)putc('\n', stderr);
vfpart = 0;
}
continue;
}
/*
* we have a file with data here. If we can not create it, skip
* over the data and purge the name from hard link table
*/
if ((fd = file_creat(arcn)) < 0) {
(void)rd_skip(arcn->skip + arcn->pad);
purg_lnk(arcn);
continue;
}
/*
* extract the file from the archive and skip over padding and
* any unprocessed data
*/
res = (*frmt->rd_data)(arcn, fd, &cnt);
file_close(arcn, fd);
if (vflag && vfpart) {
(void)putc('\n', stderr);
vfpart = 0;
}
if (!res)
(void)rd_skip(cnt + arcn->pad);
}
/*
* all done, restore directory modes and times as required; make sure
* all patterns supplied by the user were matched; block off signals
* to avoid chance for multiple entry into the cleanup code.
*/
(void)(*frmt->end_rd)();
(void)sigprocmask(SIG_BLOCK, &s_mask, (sigset_t *)NULL);
ar_close();
proc_dir();
pat_chk();
}
int
extract(void)
{
ARCHD *arcn;
int res;
off_t cnt;
struct stat sb;
int fd;
time_t now;
arcn = &archd;
/*
* figure out archive type; pass any format specific options to the
* archive option processing routine; call the format init routine;
* start up the directory modification time and access mode database
*/
if ((get_arc() < 0) || ((*frmt->options)() < 0) ||
((*frmt->st_rd)() < 0) || (dir_start() < 0))
return 1;
now = time((time_t *)NULL);
#if !HAVE_NBTOOL_CONFIG_H
if (do_chroot)
(void)fdochroot(cwdfd);
#endif
/*
* When we are doing interactive rename, we store the mapping of names
* so we can fix up hard links files later in the archive.
*/
if (iflag && (name_start() < 0))
return 1;
/*
* step through each entry on the archive until the format read routine
* says it is done
*/
while (next_head(arcn) == 0) {
int write_to_hard_link = 0;
if (arcn->type == PAX_GLL || arcn->type == PAX_GLF) {
/*
* we need to read, to get the real filename
*/
if (!(*frmt->rd_data)(arcn, -arcn->type, &cnt))
(void)rd_skip(cnt + arcn->pad);
continue;
}
/*
* check for pattern, and user specified options match. When
* all the patterns are matched we are done
*/
if ((res = pat_match(arcn)) < 0)
break;
if ((res > 0) || (sel_chk(arcn) != 0)) {
/*
* file is not selected. skip past any file
* data and padding and go back for the next
* archive member
*/
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
if (kflag && (lstat(arcn->name, &sb) == 0)) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
/*
* with -u or -D only extract when the archive member is newer
* than the file with the same name in the file system (no
* test of being the same type is required).
* NOTE: this test is done BEFORE name modifications as
* specified by pax. this operation can be confusing to the
* user who might expect the test to be done on an existing
* file AFTER the name mod. In honesty the pax spec is probably
* flawed in this respect. ignore this for GNU long links.
*/
if ((uflag || Dflag) && ((lstat(arcn->name, &sb) == 0))) {
if (uflag && Dflag) {
if ((arcn->sb.st_mtime <= sb.st_mtime) &&
(arcn->sb.st_ctime <= sb.st_ctime)) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (Dflag) {
if (arcn->sb.st_ctime <= sb.st_ctime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (arcn->sb.st_mtime <= sb.st_mtime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
}
/*
* this archive member is now been selected. modify the name.
*/
if ((pat_sel(arcn) < 0) || ((res = mod_name(arcn, RENM)) < 0))
break;
if (res > 0) {
/*
* a bad name mod, skip and purge name from link table
*/
purg_lnk(arcn);
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
if (arcn->name[0] == '/' && !check_Aflag()) {
memmove(arcn->name, arcn->name + 1, strlen(arcn->name));
}
/*
* Non standard -Y and -Z flag. When the existing file is
* same age or newer skip; ignore this for GNU long links.
*/
if ((Yflag || Zflag) && ((lstat(arcn->name, &sb) == 0))) {
if (Yflag && Zflag) {
if ((arcn->sb.st_mtime <= sb.st_mtime) &&
(arcn->sb.st_ctime <= sb.st_ctime)) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (Yflag) {
if (arcn->sb.st_ctime <= sb.st_ctime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
} else if (arcn->sb.st_mtime <= sb.st_mtime) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
}
if (vflag) {
if (vflag > 1)
ls_list(arcn, now, listf);
else {
(void)safe_print(arcn->name, listf);
vfpart = 1;
}
}
/*
* if required, chdir around.
*/
if ((arcn->pat != NULL) && (arcn->pat->chdname != NULL) &&
!to_stdout)
dochdir(arcn->pat->chdname);
if (secure && path_check(arcn, 0) != 0) {
(void)rd_skip(arcn->skip + arcn->pad);
continue;
}
/*
* all ok, extract this member based on type
*/
if ((arcn->type != PAX_REG) && (arcn->type != PAX_CTG)) {
/*
* process archive members that are not regular files.
* throw out padding and any data that might follow the
* header (as determined by the format).
*/
if ((arcn->type == PAX_HLK) ||
(arcn->type == PAX_HRG))
res = lnk_creat(arcn, &write_to_hard_link);
else
res = node_creat(arcn);
if (!write_to_hard_link) {
(void)rd_skip(arcn->skip + arcn->pad);
if (res < 0)
purg_lnk(arcn);
if (vflag && vfpart) {
(void)putc('\n', listf);
vfpart = 0;
}
continue;
}
}
if (to_stdout)
fd = STDOUT_FILENO;
else {
/*
* We have a file with data here. If we cannot create
* it, skip over the data and purge the name from hard
* link table.
*/
if ((fd = file_creat(arcn, write_to_hard_link)) < 0) {
(void)fflush(listf);
(void)rd_skip(arcn->skip + arcn->pad);
purg_lnk(arcn);
continue;
}
}
/*
* extract the file from the archive and skip over padding and
* any unprocessed data
*/
res = (*frmt->rd_data)(arcn, fd, &cnt);
if (!to_stdout)
file_close(arcn, fd);
if (vflag && vfpart) {
(void)putc('\n', listf);
vfpart = 0;
}
if (!res)
(void)rd_skip(cnt + arcn->pad);
/*
* if required, chdir around.
*/
if ((arcn->pat != NULL) && (arcn->pat->chdname != NULL))
fdochdir(cwdfd);
}
/*
* all done, restore directory modes and times as required; make sure
* all patterns supplied by the user were matched; block off signals
* to avoid chance for multiple entry into the cleanup code.
*/
(void)(*frmt->end_rd)();
(void)sigprocmask(SIG_BLOCK, &s_mask, (sigset_t *)NULL);
ar_close();
proc_dir();
pat_chk();
return 0;
}
void
list(void)
{
ARCHD *arcn;
int res;
ARCHD archd;
arcn = &archd;
/*
* figure out archive type; pass any format specific options to the
* archive option processing routine; call the format init routine. We
* also save current time for ls_list() so we do not make a system
* call for each file we need to print. If verbose (vflag) start up
* the name and group caches.
*/
if ((get_arc() < 0) || ((*frmt->options)() < 0) ||
((*frmt->st_rd)() < 0))
return;
#if !HAVE_UG_FROM_UGID
if (vflag && ((uidtb_start() < 0) || (gidtb_start() < 0)))
return;
#endif
/*
* step through the archive until the format says it is done
*/
while (next_head(arcn) == 0) {
if (arcn->type == PAX_GLL || arcn->type == PAX_GLF) {
/*
* we need to read, to get the real filename
*/
off_t cnt;
if (!(*frmt->rd_data)(arcn, arcn->type == PAX_GLF
? -1 : -2, &cnt))
(void)rd_skip(cnt + arcn->pad);
continue;
}
/*
* check for pattern, and user specified options match.
* When all patterns are matched we are done.
*/
if ((res = pat_match(arcn)) < 0)
break;
if ((res == 0) && (sel_chk(arcn) == 0)) {
/*
* pattern resulted in a selected file
*/
if (pat_sel(arcn) < 0)
break;
/*
* modify the name as requested by the user if name
* survives modification, do a listing of the file
*/
if ((res = mod_name(arcn)) < 0)
break;
if (res == 0)
ls_list(arcn, stdout);
}
/*
* skip to next archive format header using values calculated
* by the format header read routine
*/
if (rd_skip(arcn->skip + arcn->pad) == 1)
break;
}
/*
* all done, let format have a chance to cleanup, and make sure that
* the patterns supplied by the user were all matched
*/
(void)(*frmt->end_rd)();
(void)sigprocmask(SIG_BLOCK, &s_mask, NULL);
ar_close(0);
pat_chk();
}
int
list(void)
{
ARCHD *arcn;
int res;
time_t now;
arcn = &archd;
/*
* figure out archive type; pass any format specific options to the
* archive option processing routine; call the format init routine. We
* also save current time for ls_list() so we do not make a system
* call for each file we need to print. If verbose (vflag) start up
* the name and group caches.
*/
if ((get_arc() < 0) || ((*frmt->options)() < 0) ||
((*frmt->st_rd)() < 0))
return 1;
now = time((time_t *)NULL);
/*
* step through the archive until the format says it is done
*/
while (next_head(arcn) == 0) {
if (arcn->type == PAX_GLL || arcn->type == PAX_GLF) {
/*
* we need to read, to get the real filename
*/
off_t cnt;
if (!(*frmt->rd_data)(arcn, -arcn->type, &cnt))
(void)rd_skip(cnt + arcn->pad);
continue;
}
/*
* check for pattern, and user specified options match.
* When all patterns are matched we are done.
*/
if ((res = pat_match(arcn)) < 0)
break;
if ((res == 0) && (sel_chk(arcn) == 0)) {
/*
* pattern resulted in a selected file
*/
if (pat_sel(arcn) < 0)
break;
/*
* modify the name as requested by the user if name
* survives modification, do a listing of the file
*/
if ((res = mod_name(arcn, RENM)) < 0)
break;
if (res == 0) {
if (arcn->name[0] == '/' && !check_Aflag()) {
memmove(arcn->name, arcn->name + 1,
strlen(arcn->name));
}
ls_list(arcn, now, stdout);
}
/*
* if there's an error writing to stdout then we must
* stop now -- we're probably writing to a pipe that
* has been closed by the reader.
*/
if (ferror(stdout)) {
syswarn(1, errno, "Listing incomplete.");
break;
}
}
/*
* skip to next archive format header using values calculated
* by the format header read routine
*/
if (rd_skip(arcn->skip + arcn->pad) == 1)
break;
}
/*
* all done, let format have a chance to cleanup, and make sure that
* the patterns supplied by the user were all matched
*/
(void)(*frmt->end_rd)();
(void)sigprocmask(SIG_BLOCK, &s_mask, (sigset_t *)NULL);
ar_close();
pat_chk();
return 0;
}
