/*
* Initialize the device - called from Slot manager.
*/
static int
fe_pccard_probe(device_t dev)
{
struct fe_softc *sc;
int error;
/* Prepare for the device probe process. */
sc = device_get_softc(dev);
sc->sc_unit = device_get_unit(dev);
pccard_get_ether(dev, sc->sc_enaddr);
/* Probe for supported cards. */
if ((error = fe_probe_mbh(dev)) == 0)
goto end;
fe_release_resource(dev);
if ((error = fe_probe_tdk(dev)) == 0)
goto end;
fe_release_resource(dev);
end:
if (error == 0)
error = fe_alloc_irq(dev, 0);
fe_release_resource(dev);
return (error);
}
/*
* Initialize the device - called from Slot manager.
*/
static int
fe_pccard_probe(device_t dev)
{
struct fe_softc *sc;
int i, error;
uint8_t sum;
const uint8_t *ether_addr;
/* Prepare for the device probe process. */
sc = device_get_softc(dev);
sc->sc_unit = device_get_unit(dev);
ether_addr = pccard_get_ether(dev);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= ether_addr[i];
if (sum)
bcopy(ether_addr, sc->sc_enaddr, ETHER_ADDR_LEN);
/* Probe for supported cards. */
if ((error = fe_probe_mbh(dev)) == 0)
goto end;
fe_release_resource(dev);
if ((error = fe_probe_tdk(dev)) == 0)
goto end;
fe_release_resource(dev);
end:
if (error == 0)
error = fe_alloc_irq(dev, 0);
fe_release_resource(dev);
return (error);
}
static int
ex_pccard_attach(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
struct ifnet * ifp = &sc->arpcom.ac_if;
int error = 0;
int i;
uint8_t sum;
const uint8_t * ether_addr;
sc->dev = dev;
sc->ioport_rid = 0;
sc->irq_rid = 0;
if ((error = ex_alloc_resources(dev)) != 0) {
device_printf(dev, "ex_alloc_resources() failed!\n");
goto bad;
}
/*
* Fill in several fields of the softc structure:
* - I/O base address.
* - Hardware Ethernet address.
* - IRQ number.
*/
sc->iobase = rman_get_start(sc->ioport);
sc->irq_no = rman_get_start(sc->irq);
ether_addr = pccard_get_ether(dev);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= ether_addr[i];
if (sum)
bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
if ((error = ex_attach(dev)) != 0) {
device_printf(dev, "ex_attach() failed!\n");
goto bad;
}
error = bus_setup_intr(dev, sc->irq, INTR_MPSAFE,
ex_intr, (void *)sc, &sc->ih,
ifp->if_serializer);
if (error) {
device_printf(dev, "bus_setup_intr() failed!\n");
goto bad;
}
ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->irq));
return(0);
bad:
ex_release_resources(dev);
return (error);
}
static int
ex_pccard_attach(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
int error = 0;
int i;
u_char sum;
u_char ether_addr[ETHER_ADDR_LEN];
sc->dev = dev;
sc->ioport_rid = 0;
sc->irq_rid = 0;
if ((error = ex_alloc_resources(dev)) != 0) {
device_printf(dev, "ex_alloc_resources() failed!\n");
goto bad;
}
/*
* Fill in several fields of the softc structure:
* - I/O base address.
* - Hardware Ethernet address.
* - IRQ number.
*/
sc->iobase = rman_get_start(sc->ioport);
sc->irq_no = rman_get_start(sc->irq);
pccard_get_ether(dev, ether_addr);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= ether_addr[i];
if (sum)
bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
if ((error = ex_attach(dev)) != 0) {
device_printf(dev, "ex_attach() failed!\n");
goto bad;
}
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET,
ex_intr, (void *)sc, &sc->ih);
if (error) {
device_printf(dev, "bus_setup_intr() failed!\n");
goto bad;
}
return(0);
bad:
ex_release_resources(dev);
return (error);
}
static int
ex_pccard_attach(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
int error = 0;
u_char ether_addr[ETHER_ADDR_LEN];
sc->dev = dev;
sc->ioport_rid = 0;
sc->irq_rid = 0;
if ((error = ex_alloc_resources(dev)) != 0) {
device_printf(dev, "ex_alloc_resources() failed!\n");
goto bad;
}
/*
* Fill in several fields of the softc structure:
* - Hardware Ethernet address.
* - IRQ number.
*/
sc->irq_no = rman_get_start(sc->irq);
/* Try to get the ethernet address from the chip, then the CIS */
ex_get_address(sc, ether_addr);
if (!ex_pccard_enet_ok(ether_addr))
pccard_get_ether(dev, ether_addr);
if (!ex_pccard_enet_ok(ether_addr))
ex_pccard_get_silicom_mac(dev, ether_addr);
if (!ex_pccard_enet_ok(ether_addr)) {
device_printf(dev, "No NIC address found.\n");
error = ENXIO;
goto bad;
}
bcopy(ether_addr, sc->enaddr, ETHER_ADDR_LEN);
if ((error = ex_attach(dev)) != 0) {
device_printf(dev, "ex_attach() failed!\n");
goto bad;
}
return(0);
bad:
ex_release_resources(dev);
return (error);
}
static int
sn_pccard_attach(device_t dev)
{
struct sn_softc *sc = device_get_softc(dev);
int i;
uint8_t sum;
const uint8_t *ether_addr;
sc->pccard_enaddr = 0;
ether_addr = pccard_get_ether(dev);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= ether_addr[i];
if (sum) {
sc->pccard_enaddr = 1;
bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
}
return (sn_attach(dev));
}
/*
* Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
* by MASUI Kenji <*****@*****.**>
*
* (Contec uses TDK Ethernet chip -- hosokawa)
*
* This version of fe_probe_tdk has been rewrote to handle
* *generic* PC Card implementation of Fujitsu MB8696x family. The
* name _tdk is just for a historical reason. :-)
*/
static int
fe_probe_tdk (device_t dev, const struct fe_pccard_product *pp)
{
struct fe_softc *sc = device_get_softc(dev);
static struct fe_simple_probe_struct probe_table [] = {
{ FE_DLCR2, 0x10, 0x00 },
{ FE_DLCR4, 0x08, 0x00 },
/* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
{ 0 }
};
/* C-NET(PC)C occupies 16 I/O addresses. */
if (fe_alloc_port(dev, 16))
return ENXIO;
/* Fill the softc struct with default values. */
fe_softc_defaults(sc);
/*
* See if C-NET(PC)C is on its address.
*/
if (!fe_simple_probe(sc, probe_table))
return ENXIO;
/* Determine the card type. */
sc->type = FE_TYPE_TDK;
sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
pccard_get_ether(dev, sc->enaddr);
/* Make sure we got a valid station address. */
if (!fe_valid_Ether_p(sc->enaddr, 0)) {
pccard_cis_scan(dev, fe_pccard_xircom_mac, sc->enaddr);
}
/* Make sure we got a valid station address. */
if (!fe_valid_Ether_p(sc->enaddr, 0))
return ENXIO;
return 0;
}
static int
ed_pccard_attach(device_t dev)
{
u_char sum;
u_char enaddr[ETHER_ADDR_LEN];
const struct ed_product *pp;
int error, i, flags, port_rid, modem_rid;
struct ed_softc *sc = device_get_softc(dev);
u_long size;
static uint16_t *intr_vals[] = {NULL, NULL};
sc->dev = dev;
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) == NULL) {
printf("Can't find\n");
return (ENXIO);
}
modem_rid = port_rid = -1;
if (pp->flags & NE2000DVF_MODEM) {
for (i = 0; i < 4; i++) {
size = bus_get_resource_count(dev, SYS_RES_IOPORT, i);
if (size == ED_NOVELL_IO_PORTS)
port_rid = i;
else if (size == 8)
modem_rid = i;
}
if (port_rid == -1) {
device_printf(dev, "Cannot locate my ports!\n");
return (ENXIO);
}
} else {
port_rid = 0;
}
/* Allocate the port resource during setup. */
error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS);
if (error) {
printf("alloc_port failed\n");
return (error);
}
if (rman_get_size(sc->port_res) == ED_NOVELL_IO_PORTS / 2) {
port_rid++;
sc->port_res2 = bus_alloc_resource(dev, SYS_RES_IOPORT,
&port_rid, 0ul, ~0ul, 1, RF_ACTIVE);
if (sc->port_res2 == NULL ||
rman_get_size(sc->port_res2) != ED_NOVELL_IO_PORTS / 2) {
error = ENXIO;
goto bad;
}
}
error = ed_alloc_irq(dev, 0, 0);
if (error)
goto bad;
/*
* Determine which chipset we are. Almost all the PC Card chipsets
* have the Novel ASIC and NIC offsets. There's 2 known cards that
* follow the WD80x3 conventions, which are handled as a special case.
*/
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
error = ENXIO;
flags = device_get_flags(dev);
if (error != 0)
error = ed_pccard_dl100xx(dev, pp);
if (error != 0)
error = ed_pccard_ax88x90(dev, pp);
if (error != 0)
error = ed_pccard_tc5299j(dev, pp);
if (error != 0) {
error = ed_probe_Novell_generic(dev, flags);
printf("Novell generic probe failed: %d\n", error);
}
if (error != 0 && (pp->flags & NE2000DVF_TOSHIBA)) {
flags |= ED_FLAGS_TOSH_ETHER;
flags |= ED_FLAGS_PCCARD;
sc->asic_offset = ED_WD_ASIC_OFFSET;
sc->nic_offset = ED_WD_NIC_OFFSET;
error = ed_probe_WD80x3_generic(dev, flags, intr_vals);
}
if (error)
goto bad;
/*
* There are several ways to get the MAC address for the card.
* Some of the above probe routines can fill in the enaddr. If
* not, we run through a number of 'well known' locations:
* (1) From the PC Card FUNCE
* (2) From offset 0 in the shared memory
* (3) From a hinted offset in attribute memory
* (4) From 0xff0 in attribute memory
* If we can't get a non-zero MAC address from this list, we fail.
*/
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= sc->enaddr[i];
if (sum == 0) {
pccard_get_ether(dev, enaddr);
if (bootverbose)
device_printf(dev, "CIS MAC %6D\n", enaddr, ":");
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= enaddr[i];
if (sum == 0 && ed_pccard_rom_mac(dev, enaddr)) {
if (bootverbose)
device_printf(dev, "ROM mac %6D\n", enaddr,
":");
sum++;
}
if (sum == 0 && pp->flags & NE2000DVF_ENADDR) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, pp->enoff + i * 2,
enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Hint %x MAC %6D\n",
pp->enoff, enaddr, ":");
}
if (sum == 0) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, ED_DEFAULT_MAC_OFFSET +
i * 2, enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Fallback MAC %6D\n",
enaddr, ":");
}
if (sum == 0) {
device_printf(dev, "Cannot extract MAC address.\n");
ed_release_resources(dev);
return (ENXIO);
}
bcopy(enaddr, sc->enaddr, ETHER_ADDR_LEN);
}
error = ed_attach(dev);
if (error)
goto bad;
if (sc->chip_type == ED_CHIP_TYPE_DL10019 ||
sc->chip_type == ED_CHIP_TYPE_DL10022) {
/* Try to attach an MII bus, but ignore errors. */
ed_pccard_dl100xx_mii_reset(sc);
(void)mii_attach(dev, &sc->miibus, sc->ifp, ed_ifmedia_upd,
ed_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY,
MII_OFFSET_ANY, MIIF_FORCEANEG);
} else if (sc->chip_type == ED_CHIP_TYPE_AX88190 ||
sc->chip_type == ED_CHIP_TYPE_AX88790 ||
sc->chip_type == ED_CHIP_TYPE_TC5299J) {
error = mii_attach(dev, &sc->miibus, sc->ifp, ed_ifmedia_upd,
ed_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY,
MII_OFFSET_ANY, MIIF_FORCEANEG);
if (error != 0) {
device_printf(dev, "attaching PHYs failed\n");
goto bad;
}
}
if (sc->miibus != NULL) {
sc->sc_tick = ed_pccard_tick;
sc->sc_mediachg = ed_pccard_mediachg;
sc->sc_media_ioctl = ed_pccard_media_ioctl;
ed_pccard_kick_phy(sc);
} else {
ed_gen_ifmedia_init(sc);
}
if (modem_rid != -1)
ed_pccard_add_modem(dev);
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
NULL, edintr, sc, &sc->irq_handle);
if (error) {
device_printf(dev, "setup intr failed %d \n", error);
goto bad;
}
return (0);
bad:
ed_detach(dev);
return (error);
}