void
pcgssv(int nprocs, SuperMatrix *A, int *perm_c, int *perm_r,
SuperMatrix *L, SuperMatrix *U, SuperMatrix *B, int *info )
{
/*
* -- SuperLU MT routine (version 2.0) --
* Lawrence Berkeley National Lab, Univ. of California Berkeley,
* and Xerox Palo Alto Research Center.
* September 10, 2007
*
* Purpose
* =======
*
* PCGSSV solves the system of linear equations A*X=B, using the parallel
* LU factorization routine PCGSTRF. It performs the following steps:
*
* 1. If A is stored column-wise (A->Stype = NC):
*
* 1.1. Permute the columns of A, forming A*Pc, where Pc is a
* permutation matrix.
* For more details of this step, see sp_preorder.c.
*
* 1.2. Factor A as Pr*A*Pc=L*U with the permutation Pr determined
* by Gaussian elimination with partial pivoting.
* L is unit lower triangular with offdiagonal entries
* bounded by 1 in magnitude, and U is upper triangular.
*
* 1.3. Solve the system of equations A*X=B using the factored
* form of A.
*
* 2. If A is stored row-wise (A->Stype = NR), apply the above algorithm
* to the tranpose of A:
*
* 2.1. Permute columns of tranpose(A) (rows of A),
* forming transpose(A)*Pc, where Pc is a permutation matrix.
* For more details of this step, see sp_preorder.c.
*
* 2.2. Factor A as Pr*transpose(A)*Pc=L*U with the permutation Pr
* determined by Gaussian elimination with partial pivoting.
* L is unit lower triangular with offdiagonal entries
* bounded by 1 in magnitude, and U is upper triangular.
*
* 2.3. Solve the system of equations A*X=B using the factored
* form of A.
*
* See supermatrix.h for the definition of "SuperMatrix" structure.
*
*
* Arguments
* =========
*
* nprocs (input) int
* Number of processes (or threads) to be spawned and used to perform
* the LU factorization by pcgstrf(). There is a single thread of
* control to call pcgstrf(), and all threads spawned by pcgstrf()
* are terminated before returning from pcgstrf().
*
* A (input) SuperMatrix*
* Matrix A in A*X=B, of dimension (A->nrow, A->ncol), where
* A->nrow = A->ncol. Currently, the type of A can be:
* Stype = NC or NR; Dtype = _D; Mtype = GE. In the future,
* more general A will be handled.
*
* perm_c (input/output) int*
* If A->Stype=NC, column permutation vector of size A->ncol,
* which defines the permutation matrix Pc; perm_c[i] = j means
* column i of A is in position j in A*Pc.
* On exit, perm_c may be overwritten by the product of the input
* perm_c and a permutation that postorders the elimination tree
* of Pc'*A'*A*Pc; perm_c is not changed if the elimination tree
* is already in postorder.
*
* If A->Stype=NR, column permutation vector of size A->nrow
* which describes permutation of columns of tranpose(A)
* (rows of A) as described above.
*
* perm_r (output) int*,
* If A->Stype=NR, row permutation vector of size A->nrow,
* which defines the permutation matrix Pr, and is determined
* by partial pivoting. perm_r[i] = j means row i of A is in
* position j in Pr*A.
*
* If A->Stype=NR, permutation vector of size A->ncol, which
* determines permutation of rows of transpose(A)
* (columns of A) as described above.
*
* L (output) SuperMatrix*
* The factor L from the factorization
* Pr*A*Pc=L*U (if A->Stype=NC) or
* Pr*transpose(A)*Pc=L*U (if A->Stype=NR).
* Uses compressed row subscripts storage for supernodes, i.e.,
* L has types: Stype = SCP, Dtype = _D, Mtype = TRLU.
*
* U (output) SuperMatrix*
* The factor U from the factorization
* Pr*A*Pc=L*U (if A->Stype=NC) or
* Pr*transpose(A)*Pc=L*U (if A->Stype=NR).
* Use column-wise storage scheme, i.e., U has types:
* Stype = NCP, Dtype = _D, Mtype = TRU.
*
* B (input/output) SuperMatrix*
* B has types: Stype = DN, Dtype = _D, Mtype = GE.
* On entry, the right hand side matrix.
* On exit, the solution matrix if info = 0;
*
* info (output) int*
* = 0: successful exit
* > 0: if info = i, and i is
* <= A->ncol: U(i,i) is exactly zero. The factorization has
* been completed, but the factor U is exactly singular,
* so the solution could not be computed.
* > A->ncol: number of bytes allocated when memory allocation
* failure occurred, plus A->ncol.
*
*/
trans_t trans;
NCformat *Astore;
DNformat *Bstore;
SuperMatrix *AA; /* A in NC format used by the factorization routine.*/
SuperMatrix AC; /* Matrix postmultiplied by Pc */
int i, n, panel_size, relax;
fact_t fact;
yes_no_t refact, usepr;
float diag_pivot_thresh, drop_tol;
void *work;
int lwork;
superlumt_options_t superlumt_options;
Gstat_t Gstat;
double t; /* Temporary time */
double *utime;
flops_t *ops, flopcnt;
/* ------------------------------------------------------------
Test the input parameters.
------------------------------------------------------------*/
Astore = A->Store;
Bstore = B->Store;
*info = 0;
if ( nprocs <= 0 ) *info = -1;
else if ( A->nrow != A->ncol || A->nrow < 0 ||
(A->Stype != SLU_NC && A->Stype != SLU_NR) ||
A->Dtype != SLU_C || A->Mtype != SLU_GE )
*info = -2;
else if ( B->ncol < 0 || Bstore->lda < SUPERLU_MAX(1, A->nrow) )*info = -7;
if ( *info != 0 ) {
i = -(*info);
xerbla_("pcgssv", &i);
return;
}
#if 0
/* Use the best sequential code.
if this part is commented out, we will use the parallel code
run on one processor. */
if ( nprocs == 1 ) {
return;
}
#endif
fact = EQUILIBRATE;
refact = NO;
trans = NOTRANS;
panel_size = sp_ienv(1);
relax = sp_ienv(2);
diag_pivot_thresh = 1.0;
usepr = NO;
drop_tol = 0.0;
work = NULL;
lwork = 0;
/* ------------------------------------------------------------
Allocate storage and initialize statistics variables.
------------------------------------------------------------*/
n = A->ncol;
StatAlloc(n, nprocs, panel_size, relax, &Gstat);
StatInit(n, nprocs, &Gstat);
utime = Gstat.utime;
ops = Gstat.ops;
/* ------------------------------------------------------------
Convert A to NC format when necessary.
------------------------------------------------------------*/
if ( A->Stype == SLU_NR ) {
NRformat *Astore = A->Store;
AA = (SuperMatrix *) SUPERLU_MALLOC( sizeof(SuperMatrix) );
cCreate_CompCol_Matrix(AA, A->ncol, A->nrow, Astore->nnz,
Astore->nzval, Astore->colind, Astore->rowptr,
SLU_NC, A->Dtype, A->Mtype);
trans = TRANS;
} else if ( A->Stype == SLU_NC ) AA = A;
/* ------------------------------------------------------------
Initialize the option structure superlumt_options using the
user-input parameters;
Apply perm_c to the columns of original A to form AC.
------------------------------------------------------------*/
pcgstrf_init(nprocs, fact, trans, refact, panel_size, relax,
diag_pivot_thresh, usepr, drop_tol, perm_c, perm_r,
work, lwork, AA, &AC, &superlumt_options, &Gstat);
/* ------------------------------------------------------------
Compute the LU factorization of A.
The following routine will create nprocs threads.
------------------------------------------------------------*/
pcgstrf(&superlumt_options, &AC, perm_r, L, U, &Gstat, info);
flopcnt = 0;
for (i = 0; i < nprocs; ++i) flopcnt += Gstat.procstat[i].fcops;
ops[FACT] = flopcnt;
#if ( PRNTlevel==1 )
printf("nprocs = %d, flops %e, Mflops %.2f\n",
nprocs, flopcnt, flopcnt/utime[FACT]*1e-6);
printf("Parameters: w %d, relax %d, maxsuper %d, rowblk %d, colblk %d\n",
sp_ienv(1), sp_ienv(2), sp_ienv(3), sp_ienv(4), sp_ienv(5));
fflush(stdout);
#endif
/* ------------------------------------------------------------
Solve the system A*X=B, overwriting B with X.
------------------------------------------------------------*/
if ( *info == 0 ) {
t = SuperLU_timer_();
cgstrs (trans, L, U, perm_r, perm_c, B, &Gstat, info);
utime[SOLVE] = SuperLU_timer_() - t;
ops[SOLVE] = ops[TRISOLVE];
}
/* ------------------------------------------------------------
Deallocate storage after factorization.
------------------------------------------------------------*/
pxgstrf_finalize(&superlumt_options, &AC);
if ( A->Stype == SLU_NR ) {
Destroy_SuperMatrix_Store(AA);
SUPERLU_FREE(AA);
}
/* ------------------------------------------------------------
Print timings, then deallocate statistic variables.
------------------------------------------------------------*/
#ifdef PROFILE
{
SCPformat *Lstore = (SCPformat *) L->Store;
ParallelProfile(n, Lstore->nsuper+1, Gstat.num_panels, nprocs, &Gstat);
}
#endif
PrintStat(&Gstat);
StatFree(&Gstat);
}
void
pcgssvx(int nprocs, superlumt_options_t *superlumt_options, SuperMatrix *A,
int *perm_c, int *perm_r, equed_t *equed, float *R, float *C,
SuperMatrix *L, SuperMatrix *U,
SuperMatrix *B, SuperMatrix *X, float *recip_pivot_growth,
float *rcond, float *ferr, float *berr,
superlu_memusage_t *superlu_memusage, int *info)
{
/*
* -- SuperLU MT routine (version 2.0) --
* Lawrence Berkeley National Lab, Univ. of California Berkeley,
* and Xerox Palo Alto Research Center.
* September 10, 2007
*
* Purpose
* =======
*
* pcgssvx() solves the system of linear equations A*X=B or A'*X=B, using
* the LU factorization from cgstrf(). Error bounds on the solution and
* a condition estimate are also provided. It performs the following steps:
*
* 1. If A is stored column-wise (A->Stype = NC):
*
* 1.1. If fact = EQUILIBRATE, scaling factors are computed to equilibrate
* the system:
* trans = NOTRANS: diag(R)*A*diag(C)*inv(diag(C))*X = diag(R)*B
* trans = TRANS: (diag(R)*A*diag(C))**T *inv(diag(R))*X = diag(C)*B
* trans = CONJ: (diag(R)*A*diag(C))**H *inv(diag(R))*X = diag(C)*B
* Whether or not the system will be equilibrated depends on the
* scaling of the matrix A, but if equilibration is used, A is
* overwritten by diag(R)*A*diag(C) and B by diag(R)*B
* (if trans = NOTRANS) or diag(C)*B (if trans = TRANS or CONJ).
*
* 1.2. Permute columns of A, forming A*Pc, where Pc is a permutation matrix
* that usually preserves sparsity.
* For more details of this step, see csp_colorder.c.
*
* 1.3. If fact = DOFACT or EQUILIBRATE, the LU decomposition is used to
* factor the matrix A (after equilibration if fact = EQUILIBRATE) as
* Pr*A*Pc = L*U, with Pr determined by partial pivoting.
*
* 1.4. Compute the reciprocal pivot growth factor.
*
* 1.5. If some U(i,i) = 0, so that U is exactly singular, then the routine
* returns with info = i. Otherwise, the factored form of A is used to
* estimate the condition number of the matrix A. If the reciprocal of
* the condition number is less than machine precision,
* info = A->ncol+1 is returned as a warning, but the routine still
* goes on to solve for X and computes error bounds as described below.
*
* 1.6. The system of equations is solved for X using the factored form
* of A.
*
* 1.7. Iterative refinement is applied to improve the computed solution
* matrix and calculate error bounds and backward error estimates
* for it.
*
* 1.8. If equilibration was used, the matrix X is premultiplied by
* diag(C) (if trans = NOTRANS) or diag(R) (if trans = TRANS or CONJ)
* so that it solves the original system before equilibration.
*
* 2. If A is stored row-wise (A->Stype = NR), apply the above algorithm
* to the tranpose of A:
*
* 2.1. If fact = EQUILIBRATE, scaling factors are computed to equilibrate
* the system:
* trans = NOTRANS:diag(R)*A'*diag(C)*inv(diag(C))*X = diag(R)*B
* trans = TRANS: (diag(R)*A'*diag(C))**T *inv(diag(R))*X = diag(C)*B
* trans = CONJ: (diag(R)*A'*diag(C))**H *inv(diag(R))*X = diag(C)*B
* Whether or not the system will be equilibrated depends on the
* scaling of the matrix A, but if equilibration is used, A' is
* overwritten by diag(R)*A'*diag(C) and B by diag(R)*B
* (if trans = NOTRANS) or diag(C)*B (if trans = TRANS or CONJ).
*
* 2.2. Permute columns of transpose(A) (rows of A),
* forming transpose(A)*Pc, where Pc is a permutation matrix that
* usually preserves sparsity.
* For more details of this step, see csp_colorder.c.
*
* 2.3. If fact = DOFACT or EQUILIBRATE, the LU decomposition is used to
* factor the matrix A (after equilibration if fact = EQUILIBRATE) as
* Pr*transpose(A)*Pc = L*U, with the permutation Pr determined by
* partial pivoting.
*
* 2.4. Compute the reciprocal pivot growth factor.
*
* 2.5. If some U(i,i) = 0, so that U is exactly singular, then the routine
* returns with info = i. Otherwise, the factored form of transpose(A)
* is used to estimate the condition number of the matrix A.
* If the reciprocal of the condition number is less than machine
* precision, info = A->nrow+1 is returned as a warning, but the
* routine still goes on to solve for X and computes error bounds
* as described below.
*
* 2.6. The system of equations is solved for X using the factored form
* of transpose(A).
*
* 2.7. Iterative refinement is applied to improve the computed solution
* matrix and calculate error bounds and backward error estimates
* for it.
*
* 2.8. If equilibration was used, the matrix X is premultiplied by
* diag(C) (if trans = NOTRANS) or diag(R) (if trans = TRANS or CONJ)
* so that it solves the original system before equilibration.
*
* See supermatrix.h for the definition of 'SuperMatrix' structure.
*
* Arguments
* =========
*
* nprocs (input) int
* Number of processes (or threads) to be spawned and used to perform
* the LU factorization by pcgstrf(). There is a single thread of
* control to call pcgstrf(), and all threads spawned by pcgstrf()
* are terminated before returning from pcgstrf().
*
* superlumt_options (input) superlumt_options_t*
* The structure defines the input parameters and data structure
* to control how the LU factorization will be performed.
* The following fields should be defined for this structure:
*
* o fact (fact_t)
* Specifies whether or not the factored form of the matrix
* A is supplied on entry, and if not, whether the matrix A should
* be equilibrated before it is factored.
* = FACTORED: On entry, L, U, perm_r and perm_c contain the
* factored form of A. If equed is not NOEQUIL, the matrix A has
* been equilibrated with scaling factors R and C.
* A, L, U, perm_r are not modified.
* = DOFACT: The matrix A will be factored, and the factors will be
* stored in L and U.
* = EQUILIBRATE: The matrix A will be equilibrated if necessary,
* then factored into L and U.
*
* o trans (trans_t)
* Specifies the form of the system of equations:
* = NOTRANS: A * X = B (No transpose)
* = TRANS: A**T * X = B (Transpose)
* = CONJ: A**H * X = B (Transpose)
*
* o refact (yes_no_t)
* Specifies whether this is first time or subsequent factorization.
* = NO: this factorization is treated as the first one;
* = YES: it means that a factorization was performed prior to this
* one. Therefore, this factorization will re-use some
* existing data structures, such as L and U storage, column
* elimination tree, and the symbolic information of the
* Householder matrix.
*
* o panel_size (int)
* A panel consists of at most panel_size consecutive columns.
*
* o relax (int)
* To control degree of relaxing supernodes. If the number
* of nodes (columns) in a subtree of the elimination tree is less
* than relax, this subtree is considered as one supernode,
* regardless of the row structures of those columns.
*
* o diag_pivot_thresh (float)
* Diagonal pivoting threshold. At step j of the Gaussian
* elimination, if
* abs(A_jj) >= diag_pivot_thresh * (max_(i>=j) abs(A_ij)),
* use A_jj as pivot, else use A_ij with maximum magnitude.
* 0 <= diag_pivot_thresh <= 1. The default value is 1,
* corresponding to partial pivoting.
*
* o usepr (yes_no_t)
* Whether the pivoting will use perm_r specified by the user.
* = YES: use perm_r; perm_r is input, unchanged on exit.
* = NO: perm_r is determined by partial pivoting, and is output.
*
* o drop_tol (double) (NOT IMPLEMENTED)
* Drop tolerance parameter. At step j of the Gaussian elimination,
* if abs(A_ij)/(max_i abs(A_ij)) < drop_tol, drop entry A_ij.
* 0 <= drop_tol <= 1. The default value of drop_tol is 0,
* corresponding to not dropping any entry.
*
* o work (void*) of size lwork
* User-supplied work space and space for the output data structures.
* Not referenced if lwork = 0;
*
* o lwork (int)
* Specifies the length of work array.
* = 0: allocate space internally by system malloc;
* > 0: use user-supplied work array of length lwork in bytes,
* returns error if space runs out.
* = -1: the routine guesses the amount of space needed without
* performing the factorization, and returns it in
* superlu_memusage->total_needed; no other side effects.
*
* A (input/output) SuperMatrix*
* Matrix A in A*X=B, of dimension (A->nrow, A->ncol), where
* A->nrow = A->ncol. Currently, the type of A can be:
* Stype = NC or NR, Dtype = _D, Mtype = GE. In the future,
* more general A will be handled.
*
* On entry, If superlumt_options->fact = FACTORED and equed is not
* NOEQUIL, then A must have been equilibrated by the scaling factors
* in R and/or C. On exit, A is not modified
* if superlumt_options->fact = FACTORED or DOFACT, or
* if superlumt_options->fact = EQUILIBRATE and equed = NOEQUIL.
*
* On exit, if superlumt_options->fact = EQUILIBRATE and equed is not
* NOEQUIL, A is scaled as follows:
* If A->Stype = NC:
* equed = ROW: A := diag(R) * A
* equed = COL: A := A * diag(C)
* equed = BOTH: A := diag(R) * A * diag(C).
* If A->Stype = NR:
* equed = ROW: transpose(A) := diag(R) * transpose(A)
* equed = COL: transpose(A) := transpose(A) * diag(C)
* equed = BOTH: transpose(A) := diag(R) * transpose(A) * diag(C).
*
* perm_c (input/output) int*
* If A->Stype = NC, Column permutation vector of size A->ncol,
* which defines the permutation matrix Pc; perm_c[i] = j means
* column i of A is in position j in A*Pc.
* On exit, perm_c may be overwritten by the product of the input
* perm_c and a permutation that postorders the elimination tree
* of Pc'*A'*A*Pc; perm_c is not changed if the elimination tree
* is already in postorder.
*
* If A->Stype = NR, column permutation vector of size A->nrow,
* which describes permutation of columns of tranpose(A)
* (rows of A) as described above.
*
* perm_r (input/output) int*
* If A->Stype = NC, row permutation vector of size A->nrow,
* which defines the permutation matrix Pr, and is determined
* by partial pivoting. perm_r[i] = j means row i of A is in
* position j in Pr*A.
*
* If A->Stype = NR, permutation vector of size A->ncol, which
* determines permutation of rows of transpose(A)
* (columns of A) as described above.
*
* If superlumt_options->usepr = NO, perm_r is output argument;
* If superlumt_options->usepr = YES, the pivoting routine will try
* to use the input perm_r, unless a certain threshold criterion
* is violated. In that case, perm_r is overwritten by a new
* permutation determined by partial pivoting or diagonal
* threshold pivoting.
*
* equed (input/output) equed_t*
* Specifies the form of equilibration that was done.
* = NOEQUIL: No equilibration.
* = ROW: Row equilibration, i.e., A was premultiplied by diag(R).
* = COL: Column equilibration, i.e., A was postmultiplied by diag(C).
* = BOTH: Both row and column equilibration, i.e., A was replaced
* by diag(R)*A*diag(C).
* If superlumt_options->fact = FACTORED, equed is an input argument,
* otherwise it is an output argument.
*
* R (input/output) double*, dimension (A->nrow)
* The row scale factors for A or transpose(A).
* If equed = ROW or BOTH, A (if A->Stype = NC) or transpose(A)
* (if A->Stype = NR) is multiplied on the left by diag(R).
* If equed = NOEQUIL or COL, R is not accessed.
* If fact = FACTORED, R is an input argument; otherwise, R is output.
* If fact = FACTORED and equed = ROW or BOTH, each element of R must
* be positive.
*
* C (input/output) double*, dimension (A->ncol)
* The column scale factors for A or transpose(A).
* If equed = COL or BOTH, A (if A->Stype = NC) or trnspose(A)
* (if A->Stype = NR) is multiplied on the right by diag(C).
* If equed = NOEQUIL or ROW, C is not accessed.
* If fact = FACTORED, C is an input argument; otherwise, C is output.
* If fact = FACTORED and equed = COL or BOTH, each element of C must
* be positive.
*
* L (output) SuperMatrix*
* The factor L from the factorization
* Pr*A*Pc=L*U (if A->Stype = NC) or
* Pr*transpose(A)*Pc=L*U (if A->Stype = NR).
* Uses compressed row subscripts storage for supernodes, i.e.,
* L has types: Stype = SCP, Dtype = _D, Mtype = TRLU.
*
* U (output) SuperMatrix*
* The factor U from the factorization
* Pr*A*Pc=L*U (if A->Stype = NC) or
* Pr*transpose(A)*Pc=L*U (if A->Stype = NR).
* Uses column-wise storage scheme, i.e., U has types:
* Stype = NCP, Dtype = _D, Mtype = TRU.
*
* B (input/output) SuperMatrix*
* B has types: Stype = DN, Dtype = _D, Mtype = GE.
* On entry, the right hand side matrix.
* On exit,
* if equed = NOEQUIL, B is not modified; otherwise
* if A->Stype = NC:
* if trans = NOTRANS and equed = ROW or BOTH, B is overwritten
* by diag(R)*B;
* if trans = TRANS or CONJ and equed = COL of BOTH, B is
* overwritten by diag(C)*B;
* if A->Stype = NR:
* if trans = NOTRANS and equed = COL or BOTH, B is overwritten
* by diag(C)*B;
* if trans = TRANS or CONJ and equed = ROW of BOTH, B is
* overwritten by diag(R)*B.
*
* X (output) SuperMatrix*
* X has types: Stype = DN, Dtype = _D, Mtype = GE.
* If info = 0 or info = A->ncol+1, X contains the solution matrix
* to the original system of equations. Note that A and B are modified
* on exit if equed is not NOEQUIL, and the solution to the
* equilibrated system is inv(diag(C))*X if trans = NOTRANS and
* equed = COL or BOTH, or inv(diag(R))*X if trans = TRANS or CONJ
* and equed = ROW or BOTH.
*
* recip_pivot_growth (output) float*
* The reciprocal pivot growth factor computed as
* max_j ( max_i(abs(A_ij)) / max_i(abs(U_ij)) ).
* If recip_pivot_growth is much less than 1, the stability of the
* LU factorization could be poor.
*
* rcond (output) float*
* The estimate of the reciprocal condition number of the matrix A
* after equilibration (if done). If rcond is less than the machine
* precision (in particular, if rcond = 0), the matrix is singular
* to working precision. This condition is indicated by a return
* code of info > 0.
*
* ferr (output) float*, dimension (B->ncol)
* The estimated forward error bound for each solution vector
* X(j) (the j-th column of the solution matrix X).
* If XTRUE is the true solution corresponding to X(j), FERR(j)
* is an estimated upper bound for the magnitude of the largest
* element in (X(j) - XTRUE) divided by the magnitude of the
* largest element in X(j). The estimate is as reliable as
* the estimate for RCOND, and is almost always a slight
* overestimate of the true error.
*
* berr (output) float*, dimension (B->ncol)
* The componentwise relative backward error of each solution
* vector X(j) (i.e., the smallest relative change in
* any element of A or B that makes X(j) an exact solution).
*
* superlu_memusage (output) superlu_memusage_t*
* Record the memory usage statistics, consisting of following fields:
* - for_lu (float)
* The amount of space used in bytes for L\U data structures.
* - total_needed (float)
* The amount of space needed in bytes to perform factorization.
* - expansions (int)
* The number of memory expansions during the LU factorization.
*
* info (output) int*
* = 0: successful exit
* < 0: if info = -i, the i-th argument had an illegal value
* > 0: if info = i, and i is
* <= A->ncol: U(i,i) is exactly zero. The factorization has
* been completed, but the factor U is exactly
* singular, so the solution and error bounds
* could not be computed.
* = A->ncol+1: U is nonsingular, but RCOND is less than machine
* precision, meaning that the matrix is singular to
* working precision. Nevertheless, the solution and
* error bounds are computed because there are a number
* of situations where the computed solution can be more
* accurate than the value of RCOND would suggest.
* > A->ncol+1: number of bytes allocated when memory allocation
* failure occurred, plus A->ncol.
*
*/
NCformat *Astore;
DNformat *Bstore, *Xstore;
complex *Bmat, *Xmat;
int ldb, ldx, nrhs;
SuperMatrix *AA; /* A in NC format used by the factorization routine.*/
SuperMatrix AC; /* Matrix postmultiplied by Pc */
int colequ, equil, dofact, notran, rowequ;
char norm[1];
trans_t trant;
int i, j, info1;
float amax, anorm, bignum, smlnum, colcnd, rowcnd, rcmax, rcmin;
int n, relax, panel_size;
Gstat_t Gstat;
double t0; /* temporary time */
double *utime;
flops_t *ops, flopcnt;
/* External functions */
extern float clangs(char *, SuperMatrix *);
extern double slamch_(char *);
Astore = A->Store;
Bstore = B->Store;
Xstore = X->Store;
Bmat = Bstore->nzval;
Xmat = Xstore->nzval;
n = A->ncol;
ldb = Bstore->lda;
ldx = Xstore->lda;
nrhs = B->ncol;
superlumt_options->perm_c = perm_c;
superlumt_options->perm_r = perm_r;
*info = 0;
dofact = (superlumt_options->fact == DOFACT);
equil = (superlumt_options->fact == EQUILIBRATE);
notran = (superlumt_options->trans == NOTRANS);
if (dofact || equil) {
*equed = NOEQUIL;
rowequ = FALSE;
colequ = FALSE;
} else {
rowequ = (*equed == ROW) || (*equed == BOTH);
colequ = (*equed == COL) || (*equed == BOTH);
smlnum = slamch_("Safe minimum");
bignum = 1. / smlnum;
}
/* ------------------------------------------------------------
Test the input parameters.
------------------------------------------------------------*/
if ( nprocs <= 0 ) *info = -1;
else if ( (!dofact && !equil && (superlumt_options->fact != FACTORED))
|| (!notran && (superlumt_options->trans != TRANS) &&
(superlumt_options->trans != CONJ))
|| (superlumt_options->refact != YES &&
superlumt_options->refact != NO)
|| (superlumt_options->usepr != YES &&
superlumt_options->usepr != NO)
|| superlumt_options->lwork < -1 )
*info = -2;
else if ( A->nrow != A->ncol || A->nrow < 0 ||
(A->Stype != SLU_NC && A->Stype != SLU_NR) ||
A->Dtype != SLU_C || A->Mtype != SLU_GE )
*info = -3;
else if ((superlumt_options->fact == FACTORED) &&
!(rowequ || colequ || (*equed == NOEQUIL))) *info = -6;
else {
if (rowequ) {
rcmin = bignum;
rcmax = 0.;
for (j = 0; j < A->nrow; ++j) {
rcmin = MIN(rcmin, R[j]);
rcmax = SUPERLU_MAX(rcmax, R[j]);
}
if (rcmin <= 0.) *info = -7;
else if ( A->nrow > 0)
rowcnd = SUPERLU_MAX(rcmin,smlnum) / MIN(rcmax,bignum);
else rowcnd = 1.;
}
if (colequ && *info == 0) {
rcmin = bignum;
rcmax = 0.;
for (j = 0; j < A->nrow; ++j) {
rcmin = MIN(rcmin, C[j]);
rcmax = SUPERLU_MAX(rcmax, C[j]);
}
if (rcmin <= 0.) *info = -8;
else if (A->nrow > 0)
colcnd = SUPERLU_MAX(rcmin,smlnum) / MIN(rcmax,bignum);
else colcnd = 1.;
}
if (*info == 0) {
if ( B->ncol < 0 || Bstore->lda < SUPERLU_MAX(0, A->nrow) ||
B->Stype != SLU_DN || B->Dtype != SLU_C ||
B->Mtype != SLU_GE )
*info = -11;
else if ( X->ncol < 0 || Xstore->lda < SUPERLU_MAX(0, A->nrow) ||
B->ncol != X->ncol || X->Stype != SLU_DN ||
X->Dtype != SLU_C || X->Mtype != SLU_GE )
*info = -12;
}
}
if (*info != 0) {
i = -(*info);
xerbla_("pcgssvx", &i);
return;
}
/* ------------------------------------------------------------
Allocate storage and initialize statistics variables.
------------------------------------------------------------*/
panel_size = superlumt_options->panel_size;
relax = superlumt_options->relax;
StatAlloc(n, nprocs, panel_size, relax, &Gstat);
StatInit(n, nprocs, &Gstat);
utime = Gstat.utime;
ops = Gstat.ops;
/* ------------------------------------------------------------
Convert A to NC format when necessary.
------------------------------------------------------------*/
if ( A->Stype == SLU_NR ) {
NRformat *Astore = A->Store;
AA = (SuperMatrix *) SUPERLU_MALLOC( sizeof(SuperMatrix) );
cCreate_CompCol_Matrix(AA, A->ncol, A->nrow, Astore->nnz,
Astore->nzval, Astore->colind, Astore->rowptr,
SLU_NC, A->Dtype, A->Mtype);
if ( notran ) { /* Reverse the transpose argument. */
trant = TRANS;
notran = 0;
} else {
trant = NOTRANS;
notran = 1;
}
} else { /* A->Stype == NC */
trant = superlumt_options->trans;
AA = A;
}
/* ------------------------------------------------------------
Diagonal scaling to equilibrate the matrix.
------------------------------------------------------------*/
if ( equil ) {
t0 = SuperLU_timer_();
/* Compute row and column scalings to equilibrate the matrix A. */
cgsequ(AA, R, C, &rowcnd, &colcnd, &amax, &info1);
if ( info1 == 0 ) {
/* Equilibrate matrix A. */
claqgs(AA, R, C, rowcnd, colcnd, amax, equed);
rowequ = (*equed == ROW) || (*equed == BOTH);
colequ = (*equed == COL) || (*equed == BOTH);
}
utime[EQUIL] = SuperLU_timer_() - t0;
}
/* ------------------------------------------------------------
Scale the right hand side.
------------------------------------------------------------*/
if ( notran ) {
if ( rowequ ) {
for (j = 0; j < nrhs; ++j)
for (i = 0; i < A->nrow; ++i) {
cs_mult(&Bmat[i+j*ldb], &Bmat[i+j*ldb], R[i]);
}
}
} else if ( colequ ) {
for (j = 0; j < nrhs; ++j)
for (i = 0; i < A->nrow; ++i) {
cs_mult(&Bmat[i+j*ldb], &Bmat[i+j*ldb], C[i]);
}
}
/* ------------------------------------------------------------
Perform the LU factorization.
------------------------------------------------------------*/
if ( dofact || equil ) {
/* Obtain column etree, the column count (colcnt_h) and supernode
partition (part_super_h) for the Householder matrix. */
t0 = SuperLU_timer_();
sp_colorder(AA, perm_c, superlumt_options, &AC);
utime[ETREE] = SuperLU_timer_() - t0;
#if ( PRNTlevel >= 2 )
printf("Factor PA = LU ... relax %d\tw %d\tmaxsuper %d\trowblk %d\n",
relax, panel_size, sp_ienv(3), sp_ienv(4));
fflush(stdout);
#endif
/* Compute the LU factorization of A*Pc. */
t0 = SuperLU_timer_();
pcgstrf(superlumt_options, &AC, perm_r, L, U, &Gstat, info);
utime[FACT] = SuperLU_timer_() - t0;
flopcnt = 0;
for (i = 0; i < nprocs; ++i) flopcnt += Gstat.procstat[i].fcops;
ops[FACT] = flopcnt;
if ( superlumt_options->lwork == -1 ) {
superlu_memusage->total_needed = *info - A->ncol;
return;
}
}
if ( *info > 0 ) {
if ( *info <= A->ncol ) {
/* Compute the reciprocal pivot growth factor of the leading
rank-deficient *info columns of A. */
*recip_pivot_growth = cPivotGrowth(*info, AA, perm_c, L, U);
}
} else {
/* ------------------------------------------------------------
Compute the reciprocal pivot growth factor *recip_pivot_growth.
------------------------------------------------------------*/
*recip_pivot_growth = cPivotGrowth(A->ncol, AA, perm_c, L, U);
/* ------------------------------------------------------------
Estimate the reciprocal of the condition number of A.
------------------------------------------------------------*/
t0 = SuperLU_timer_();
if ( notran ) {
*(unsigned char *)norm = '1';
} else {
*(unsigned char *)norm = 'I';
}
anorm = clangs(norm, AA);
cgscon(norm, L, U, anorm, rcond, info);
utime[RCOND] = SuperLU_timer_() - t0;
/* ------------------------------------------------------------
Compute the solution matrix X.
------------------------------------------------------------*/
for (j = 0; j < nrhs; j++) /* Save a copy of the right hand sides */
for (i = 0; i < B->nrow; i++)
Xmat[i + j*ldx] = Bmat[i + j*ldb];
t0 = SuperLU_timer_();
cgstrs(trant, L, U, perm_r, perm_c, X, &Gstat, info);
utime[SOLVE] = SuperLU_timer_() - t0;
ops[SOLVE] = ops[TRISOLVE];
/* ------------------------------------------------------------
Use iterative refinement to improve the computed solution and
compute error bounds and backward error estimates for it.
------------------------------------------------------------*/
t0 = SuperLU_timer_();
cgsrfs(trant, AA, L, U, perm_r, perm_c, *equed,
R, C, B, X, ferr, berr, &Gstat, info);
utime[REFINE] = SuperLU_timer_() - t0;
/* ------------------------------------------------------------
Transform the solution matrix X to a solution of the original
system.
------------------------------------------------------------*/
if ( notran ) {
if ( colequ ) {
for (j = 0; j < nrhs; ++j)
for (i = 0; i < A->nrow; ++i) {
cs_mult(&Xmat[i+j*ldx], &Xmat[i+j*ldx], C[i]);
}
}
} else if ( rowequ ) {
for (j = 0; j < nrhs; ++j)
for (i = 0; i < A->nrow; ++i) {
cs_mult(&Xmat[i+j*ldx], &Xmat[i+j*ldx], R[i]);
}
}
/* Set INFO = A->ncol+1 if the matrix is singular to
working precision.*/
if ( *rcond < slamch_("E") ) *info = A->ncol + 1;
}
superlu_cQuerySpace(nprocs, L, U, panel_size, superlu_memusage);
/* ------------------------------------------------------------
Deallocate storage after factorization.
------------------------------------------------------------*/
if ( superlumt_options->refact == NO ) {
SUPERLU_FREE(superlumt_options->etree);
SUPERLU_FREE(superlumt_options->colcnt_h);
SUPERLU_FREE(superlumt_options->part_super_h);
}
if ( dofact || equil ) {
Destroy_CompCol_Permuted(&AC);
}
if ( A->Stype == SLU_NR ) {
Destroy_SuperMatrix_Store(AA);
SUPERLU_FREE(AA);
}
/* ------------------------------------------------------------
Print timings, then deallocate statistic variables.
------------------------------------------------------------*/
/*PrintStat(&Gstat);*/
StatFree(&Gstat);
}
